Add a further ACL example where the elements of the search key
are not entirely fitting into the 4 consecutive bytes of all
input fields.
Signed-off-by: Antonio Fischetti <antonio.fischetti@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
* remove outdated chapter reference to Multi-process support.
* html output converts "--" to "-", this is wrong when explaining the
command arguments, used fixed width quotes for them.
Fixes: fc1f2750a3ec ("doc: programmers guide")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Remove **Contents** and |Today| from the rst doc index files since
these are already added automatically to PDF files and are of
little value to the Html files where the Contents is shown in a
sidebar.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The old install command was:
make install T=x86_64-native-linuxapp-gcc DESTDIR=install
It still works and can be replaced by these more standard commands:
make config T=x86_64-native-linuxapp-gcc 0=x86_64-native-linuxapp-gcc
make O=x86_64-native-linuxapp-gcc
make install O=x86_64-native-linuxapp-gcc prefix= DESTDIR=install
It means the "make install" do not perform any compilation anymore when T
is not used. It is done only in pre_install to keep compatibility with the
old syntax based on T= option.
The default prefix /usr/local is empty in the T= case which is
used only for a local install.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
The rule "install" follows these conventions:
http://gnu.org/prep/standards/html_node/Directory-Variables.htmlhttp://gnu.org/prep/standards/html_node/DESTDIR.html
The variable sdkdir has been added to the more standards ones,
to configure the directory used with RTE_SDK when using the DPDK makefiles
to build an application.
It is still possible to build DPDK with the "install T=" rule without
specifying any DESTDIR. In such case there is no install, as before.
The old usage of an installed SDK is:
make -C examples/helloworld RTE_SDK=$(readlink -m $DESTDIR) \
RTE_TARGET=x86_64-native-linuxapp-gcc
RTE_TARGET can be specified but is useless now with an installed SDK.
The RTE_SDK directory must now point to a different path depending of
the installation.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
The multi-target install create some subdirectories with the target name
which is not standard for a "make install" procedure.
The uninstall procedure cannot be applied properly (without removing
all files in a directory). It would need to pre-compute paths.
As it is a packaging issue, it is removed from the build system capabilities.
The variable BUILD_DIR is also renamed to RTE_OUTPUT used in other files.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
It is not possible to test every configs on an unique machine.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Add virtual PMD which communicates with COMBO cards through sze2
layer using libsze2 library.
Since link_speed is uint16_t, there can not be used number for 100G
speed, therefore link_speed is set to ETH_LINK_SPEED_10G until the
type of link_speed is solved.
Signed-off-by: Matej Vido <matejvido@gmail.com>
Update the strings used for presenting stats to adhere
to the scheme previously presented. Updated xstats_get()
function to handle Q information only if xstats() is not
implemented in the PMD, providing the PMD with the needed
flexibility to expose its extended Q stats.
Add extended statistic section to the programmers
guide, poll mode driver section. This section describes
how the strings stats are formatted, and how the client
code can use this to gather information about the stat.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
Bonding device implements independent management of RSS settings. It
stores its own copies of settings i.e. RETA, RSS hash function and RSS
key. It’s required to ensure consistency.
1) RSS hash function set for bonding device is maximal set of RSS hash
functions supported by all bonded devices. That mean, to have RSS support
for bonding, all slaves should be RSS-capable.
2) RSS key is propagated over the slaves "as is".
3) RETA for bonding is an internal table managed by bonding API, and is
used as a pattern to set up slaves. Its size is GCD of all RETA sizes, so
it can be easily used as a pattern providing expected behavior, even if
slaves RETA sizes are different.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
These functions were tagged as deprecated in 2.0 so they can be
removed in 2.2.
The library version is incremented.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Helin Zhang <helin.zhang@intel.com>
[Thomas: update doc and version]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The malloc library is now part of the EAL.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This patch updates the "Source Organisation" section of the
Programmers Guide to add an note that the code in the
drivers/net/pmd/base directories should not be modifed
by the user apart from the pmd_osdep.[ch] files.
Also fixes some grammar and rst issues in that section.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
The patch updates the env_abstraction_layer.rst part in prog_guide.
It adds the RX interrupt event declaration and revises the others in
interrupt event section.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Danny Zhou <danny.zhou@intel.com>
Updates hash library documentation, reflecting
the new implementation changes.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Adds cxgbe poll mode driver documentation under the usual doc/guides/nics/
directory with the rest of the drivers. The documentation covers cxgbe
implementation details, features and limitations, prerequisites,
configuration, and a sample application usage.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This change adds automatic table references to the docs. The
table numbers in the generated Html and PDF docs are now
automatically numbered based on section.
Requires Sphinx >= 1.3.1.
This change:
* Adds a RST table:: directive to each table caption.
* Indents the tables to the required directive level.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
This change adds automatic figure references to the docs. The
figure numbers in the generated Html and PDF docs are now
automatically numbered based on section.
Requires Sphinx >= 1.3.1.
The patch makes the following changes.
* Changes image:: tag to figure:: and moves image caption
to the figure.
* Adds captions to figures that didn't previously have any.
* Un-templates the |image-name| substitution definitions
into explicit figure:: tags. They weren't used more
than once anyway and Sphinx doesn't support them
for figure.
* Adds a target to each image that didn't previously
have one so that they can be cross-referenced.
* Renamed existing image target to match the image
name for consistency.
* Replaces the Figures lists with automatic :numref:
:ref: entries to generate automatic numbering
and captions.
* Replaces "Figure" references with automatic :numref:
references.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Move xenvirt PMD to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move vmxnet3 PMD to drivers/net directory.
As part of the move, rename the "vmxnet3" subdirectory, containing the
original FreeBSD drivers, from "vmxnet3" to the more standard name
"base", to indicate it contains the base drivers used for the
implementation.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move virtio PMD to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move ring PMD to drivers directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move pcap pmd to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move null PMD to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
move mlx4 PMD to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
move ixgbe PMD to drivers/net directory.
As part of the move, we rename the ixgbe directory, containing the
ixgbe "base driver" code, from "ixgbe" to "base".
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move i40e PMD to drivers/net directory.
As part of the move, rename the "i40e" directory, containing the "base
driver" code, from "i40e" to "base".
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
move fm10k PMD to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
move enic PMD to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
[Thomas: move vnic/ to base/]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move e1000 pmd to drivers/net directory
As part of move, rename "e1000" subdirectory, which contains the code
from the "base driver", to "base".
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move bonded ethdev pmd to drivers/net
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
move af_packet pmd to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add a new top-level "drivers" directory to which all PMDs will be moved
for easier maintenance of both lib folder and drivers themselves. This
new directory is a dependency of all the apps in the app folder, so
the makefiles for each app are updated.
To the new top-level directory add a "net" subdirectory to classify
more specifically our existing PMDs as ethernet drivers
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
[Thomas: fix dependencies and merge several patches]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
NO_AUTOLIBS is not required as it was not used or defined in the config files.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Converted the Glossary table in the Programmer's Guide
to a definition list to improve rendering.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Some blocks are not visible with some Sphinx versions because
they are using the wrong keyword for code.
Tested with Sphinx v1.1.3.
Fixes: 1733be6d3147 ("doc: new eal multi-pthread feature")
Fixes: ccefe752cab0 ("doc: add jobstats sample guide")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
CONFIG_RTE_MBUF_SCATTER_GATHER was renamed into CONFIG_RTE_MBUF_REFCNT
by commit 62814bc2e923 and removed by commit 4769bc5a27cc.
Some traces remain because of delayed patches.
It can also be removed from doxygen config.
It is now poisoned in rte_mbuf.h to warn any misuse.
Fixes: d0dff9ba445e ("doc: sample application user guide")
Fixes: fc1f2750a3ec ("doc: programmers guide")
Fixes: 4769bc5a27cc ("mbuf: remove build option to disable refcnt")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
There are some references to DPDK.xyz.mk files that do not exist in the
dpdk tree. This was probably the result of an automatic replacement, so
restore the proper file names which are rte.xyz.mk.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Create nics guide by moving chapters about Intel and Mellanox NICs.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
Xen is an environment comparable to Linux and FreeBSD which
have their own guide.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
