Also rename arp_hrd, arp_pro, arp_hln, arp_pln and arp_op fields
to avoid conflict with the #defines in gnu libc.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The "make clean" command had a number of issues:
- the "--ignore-fail-on-non-empty" flag is not present on BSD
- the call to remove the build folder would fail if there was no build
folder present.
These are fixed by only removing the build folder if it exists, and by
using -p flag to rmdir in place of --ignore-fail-on-non-empty
Fixes: 22119c4591 ("examples: use pkg-config in makefiles")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The examples/meson.build file scanned the filesystem to find all examples
to build (for examples=all option) and install. However, using run_command
and scanning the filesystem prevented ninja from properly detecting the
addition or removal of any examples - one had to recreate the build
directory from scratch to guarantee correct detection of all examples. This
patch replaces this generated list with a static list of examples, thereby
allowing proper tracking by ninja/meson, but at the cost of having to
update this file when a new example is added or removed.
This also fixes an issue with Windows builds, since "sh" is not available
there.
Fixes: 2daf565f91 ("examples: install as part of ninja install")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
While the examples were being installed into the appropriate install path
when processing the examples/meson.build file, that file was only processed
if the "examples" meson parameter was non-empty. Since we now do more than
just build the examples, we need to unconditionally process the file.
Fixes: 2daf565f91 ("examples: install as part of ninja install")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Fix invalid indentation - extra whitespace before error directive which
is causing syntax error when no pkgconfig file for the DPDK is found and
RTE_SDK is not specified.
Fixes: d299106e8e ("examples/ipsec-secgw: add IPsec sample application")
Cc: stable@dpdk.org
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
coverity complains about a null-termination after a read,
so we terminate once we exit the do-while read loop.
Coverity issue: 337680
Fixes: a63504a90f ("examples/power: add JSON string handling")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
The freqs array in freq_info struct has RTE_MAX_LCORE_FREQS elements,
yet the code can attempt to look at the index at RTE_MAX_LCORE,
which may be greater than RTE_MAX_LCORE_FREQS. Fix to limit index to
RTE_MAX_LCORE_FREQS.
Coverity issue: 337660
Fixes: d26c18c932 ("examples/vm_power: cpu frequency in host")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
For client_server_mp, the total number of buffers for the mbuf mempool
should be correctly calculated. Otherwise, having more clients will stop
traffic.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Traditionally, only a single buffer pool per port
(or, per-port-per-socket) is created in l3fwd application.
If separate pools are created per-port, it might lead to gain in
performance as packet alloc/dealloc requests would be isolated
across ports (and their corresponding lcores).
This patch adds an argument '--per-port-pool' to the l3fwd application.
By default, old mode of single pool per port (split on sockets) is
active.
L3fwd user guide is also updated by this patch.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Ruifeng Wang <ruifeng.wang@arm.com>
When we install dpdk onto a system, we want to put the examples into
the /usr/share/dpdk (or /usr/local/share) directory for reference.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
On freebsd we need to include sys/socket.h to get the definition of
AF_INET in order to compile.
Fixes: d5ceea4ab1 ("examples/l3fwd: format IP addresses for printing")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Currently, two separate mempools are being used for creating crypto
sessions and its private data.
crypto sessions are created and initialized separately, so a separate
mempool is passed to each API, but in case of security sessions, where
only one API create and initialize the private data as well.
So if session mempool is passed to create a security session, the
mempool element size is not sufficient enough to hold the private
data as well.
As a perfect solution, the security session create API should take 2
mempools for header and private data and initiatlize accordingly,
but that would mean an API breakage, which will be done in the next
release cycle. So introducing this patch as a workaround to resolve this
issue.
Fixes: 261bbff75e ("examples: use separate crypto session mempools")
Cc: stable@dpdk.org
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
acl_classify() returns zero value when no matching rule was found.
Currently ipsec-secgw treats it as a valid SPI value, though it has
to discard such packets.
Error could be easily observed by sending outbound unmatched packets,
user will see something like that in the log:
IPSEC: No cryptodev: core 7, cipher_algo 0, auth_algo 0, aead_algo 0
To fix it we need to treat packets with zero result from acl_classify()
as invalid ones. Also we can change DISCARD and BYPASS values to
simplify checks and save some extra space for valid SPI values.
To summarize the approach:
1. have special SPI values for DISCARD and BYPASS.
2. store in SPD full SPI value.
3. after acl_classify(), first check SPI value for DISCARD and BYPASS,
then convert it in SA index.
4. add check at initilisation time that for each SPD rule there is a
corresponding SA entry (with the same SPI).
Also marked few global variables as *static*.
Fixes: 906257e965 ("examples/ipsec-secgw: support IPv6")
Fixes: 2a5106af13 ("examples/ipsec-secgw: fix corner case for SPI value")
Cc: stable@dpdk.org
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Coverity points out that there is a check in the main thread loop for the
ctrlr->bdev being NULL, but by that stage the pointer has already been
dereferenced. Therefore, for safety, before we enter the loop do an
initial check on the parameter structure.
Coverity issue: 158657
Fixes: db75c7af19 ("examples/vhost_scsi: introduce a new sample app")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
The header check for the example app was looking for virtio_scsi.h without
the "linux/" prefix, which meant it was never getting found when it should
have been.
Fixes: 8d47a753b7 ("examples/vhost_scsi: disable build if missing dependency")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Running the devtools/test-build.sh script on IBM Power systems fails
because the IXGBE_PMD is explicity disabled for Power as an untested
driver, but the examples/vm_power_manager application has a hard
dependency on a function call in the IXGBE_PMD.
Modify the example application so that all dependencies on PMD code
are conditionally compiled.
Bugzilla ID: 237
Fixes: c9a4779135 ("examples/vm_power_mgr: set MAC address of VF")
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: David Hunt <david.hunt@intel.com>
Fix the data type of last_branches, last_branch_misses
from uint32_t to uint64_t, and for hits_diff, miss_diff
from int to int64_t respectively to fix possible
overflow or truncation.
Coverity issue: 337677
Fixes: 4b1a631b8a ("examples/vm_power: add oob monitoring functions")
Cc: stable@dpdk.org
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
After the read() the jason_data null termination is missing
for the case "indent < 0", for "indent > 0" and "indent == 0"
cases null termination is already handled.
So add the missing case "indent < 0" to the existing "indent == 0"
case to fix null termination.
Coverity issue: 337680
Fixes: a63504a90f ("examples/power: add JSON string handling")
Cc: stable@dpdk.org
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
A for loop to MAX_VFS had a break as the last line, so the w++
would never get called, breaking out of the loop after the
first iteration. Remove the break so that the loop can execute
properly.
Coverity issue: 337682
Fixes: ace158c4a8 ("examples/vm_power: add check for port count")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Rami Rosen <ramirose@gmail.com>
A previous change removed the limit of 64 cores by
moving away from 64-bit masks to char arrays. However
this left a buffer overrun issue, where the max channels
was defined as 64, and max cores was defined as 256. These
should all be consistently set to RTE_MAX_LCORE.
The #defines being removed are CHANNEL_CMDS_MAX_CPUS,
CHANNEL_CMDS_MAX_CHANNELS, POWER_MGR_MAX_CPUS, and
CHANNEL_CMDS_MAX_VM_CHANNELS, and are being replaced
with RTE_MAX_LCORE for consistency and simplicity.
Coverity issue: 337672, 337673, 337678
Fixes: fd73630e95 ("examples/power: change 64-bit masks to arrays")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Removed dependency to mac_list from policies:
* BRANCH_RATIO,
* WORKLOAD,
* TIME
in function update_policy.
Fixes: 1b89799147 ("power: update error handling")
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Tested-by: Yufeng Mo <yufengx.mo@intel.com>
The IP addresses should be formatted using standard routines
rather than outputing in raw hex.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The l3fwd example should use the IPv4 addresses defined in RFC5735 and
the IPv6 addresses defined in RFC5180 for the L3 forwarding example
Longest Prefix Match table.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Promote the adapter functions and rte_event_port_unlinks_in_progress()
as stable as it's been added for a while now and multiple drivers and
test application like test-eventdev has been tested using the adapter APIs.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The function rte_eal_cleanup() was introduced more than one year ago,
in DPDK 18.02. It is no longer experimental, allowing
pdump, proc-info and hotplug_mp apps to not need any experimental API.
The function rte_ctrl_thread_create() was introduced one year ago
in DPDK 18.05. It is no longer experimental, allowing
KNI PMD and TEP example to not need any experimental API.
The functions rte_socket_count() and rte_socket_id_by_idx() were
introduced one year ago in DPDK 18.05. They are no longer experimental.
The function rte_dev_is_probed() was introduced half a year ago
in DPDK 18.11. It is no longer experimental.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
As stated in the deprecation notice from December 2016,
"the legacy filter API, including rte_eth_dev_filter_supported(),
rte_eth_dev_filter_ctrl() as well as filter types MACVLAN, ETHERTYPE,
FLEXIBLE, SYN, NTUPLE, TUNNEL, FDIR, HASH and L2_TUNNEL, is superseded
by the generic flow API (rte_flow)".
After a long wait of more than two years, the legacy filter API
is marked as deprecated, while still tested with testpmd and
the tep_termination example.
The next step will be to announce a deadline for complete removal.
As preparation of the removal of rte_eth_ctrl.h,
RTE_ETH_FLOW_*, RTE_TUNNEL_TYPE_* and RTE_ETH_HASH_FUNCTION_* definitions
are moved to rte_ethdev.h and rte_flow.h.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
As a result of the cmac test running the test where
PT len is 65536 it should give a result back to the
user USER1: Error -1: Prepare op USER1: PT len 65536
as this MSG len is not supported. Issue was
that the application was not freeing the op properly after
a while causing the app to fail.
CRYPTODEV: rte_cryptodev_sym_session_create() line 1340:
couldn't get object from session mempool
USER1: Error -12: test block
USER1: Error -12: Failed test CMAC/req/CMAC.req
Fixes: cd255ccf57 ("examples/fips_validation: support AES parsing")
Cc: stable@dpdk.org
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Application was failing as the HMAC and
Plain SHA fips request files are similar in a
way that they both have SHA- in the top section to
determine the hash algo and hash sizes. And HMAC having the
algo in the second line but the Plain SHA in the third
meant that when the HMAC files was used once it parsed the third
line Plain SHA was set as the algo and not HMAC.
USER1: Failed to get capability for cdev 0
USER1: Error -22: test block
[L=20 SHAAlg=SHA_2]
USER1: Error -22: Failed test /root/FIPS/HMAC/req/HMAC.req
Fixes: f4797bae00 ("examples/fips_validation: support plain SHA")
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
The definition of CPU_AND differs from Linux to BSD, so we need to use
RTE_CPU_AND instead.
Fixes: f6baccbc2b ("examples/l2fwd-cat: add sample application for PQoS CAT and CDP")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The power library is not built on non-Linux systems, so skip the
distributor sample if it's not found, as it's a mandatory dependency.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: David Hunt <david.hunt@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Define variables for "is_linux", "is_freebsd" and "is_windows"
to make the code shorter for comparisons and more readable.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
This patch implements the changes proposed in the deprecation
note[1]. Replace multiple color definitions in various places such as
rte_meter.h, rte_tm.h and rte_mtr.h with single rte_color defined
in rte_meter.h.
This is simple search and replace exercise without any implementation
change.
[1] https://mails.dpdk.org/archives/dev/2019-January/123861.html
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Do a global replace of snprintf(..."%s",...) with strlcpy, adding in the
rte_string_fns.h header if needed. The function changes in this patch were
auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy.cocci --dir . --in-place
and then the files edited using awk to add in the missing header:
gawk -i inplace '/include <rte_/ && ! seen { \
print "#include <rte_string_fns.h>"; seen=1} {print}'
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
For files that already have rte_string_fns.h included in them, we can
do a straight replacement of snprintf(..."%s",...) with strlcpy. The
changes in this patch were auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy-with-header.cocci --dir . --in-place
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Added meson workarounds to build helloworld on Windows.
Windows currently only supports kvargs and eal libraries.
This change restricts the build flow to supported libraries
only.
Signed-off-by: Anand Rawat <anand.rawat@intel.com>
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Harini Ramakrishnan <harini.ramakrishnan@microsoft.com>
The distributor application is bottlenecked by the distributor core,
so if we can give more frequency to this core, then the overall
performance of the application may increase.
This patch uses the rte_power_get_capabilities() API to query the
cores provided in the core mask, and if any high frequency cores are
found (e.g. Turbo Boost is enabled), we will pin the distributor
workload to that core.
Signed-off-by: Liang Ma <liang.j.ma@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Most examples have in their makefiles a default RTE_TARGET directory to be
used in case RTE_TARGET is not set. Rather than just using a hard-coded
default, we can instead detect what the build directory is relative to
RTE_SDK directory.
This fixes a potential issue for anyone who continues to build using
"make install T=x86_64-native-linuxapp-gcc" and skips setting RTE_TARGET
explicitly, instead relying on the fact that they were building in a
directory which corresponded to the example default path - which was
changed to "x86_64-native-linux-gcc" by commit 218c4e68c1 ("mk: use
linux and freebsd in config names").
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Update for handling negative returned status from functions
call.
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
This patch adds the functional test scripts to ipsec-secgw
sample application for both transport and tunnel working
mode.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch adds the functional test scripts to ipsec-secgw
sample application for both transport and tunnel working
mode.
Updated a bit on common_defs to use "mktemp" instead of "tempfile"
as Fedora does not like the command.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch enables plain SHA algorithm CAVP test support
in fips_validation sample application.
Signed-off-by: Damian Nowak <damianx.nowak@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
