Replace use of RTE_MACHINE_CPUFLAG macros with regular compiler
macros, which are more complete than those provided by DPDK, and as such
it allows new instruction sets to be leveraged without having to do
extra work to set them up in DPDK.
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
There is a common macro __rte_unused, avoiding warnings,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Add em main loop for handling events based on capabilities of the
event device.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add lpm main loop for handling events based on capabilities of the
event device.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add ethernet port Rx/Tx queue setup for event device which are later
used for setting up event eth Rx/Tx adapters.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add framework to enable event device as a producer of packets.
To switch between event mode and poll mode the following options
have been added:
`--mode="eventdev"` or `--mode="poll"`
Allow the user to select the schedule type to be either
RTE_SCHED_TYPE_ORDERED, RTE_SCHED_TYPE_ATOMIC or RTE_SCHED_TYPE_PARALLEL
through:
`--eventq-sched="ordered"` or `--eventq-sched="atomic"` or
`--eventq-sched="parallel"`
Allow the user to specify the number of Rx queues to be connected to
event queue using:
`--event-eth-rxqs`
Poll mode is still the default operation mode.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Extend port_id definition from uint8_t to uint16_t in lib and drivers
data structures, specifically rte_eth_dev_data. Modify the APIs,
drivers and app using port_id at the same time.
Fix some checkpatch issues from the original code and remove some
unnecessary cast operations.
release_17_11 and deprecation docs have been updated in this patch.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
As a example to use ptype info, l3fwd needs firstly to use
rte_eth_dev_get_supported_ptypes() API to check if device and/or
its PMD driver will parse and fill the needed packet type; if not,
use the newly added option, --parse-ptype, to analyze it in the
callback softly.
As the mode of EXACT_MATCH uses the 5 tuples to caculate hash, so
we narrow down its scope to:
a. ip packets with no extensions, and
b. L4 payload should be either tcp or udp.
Note: this patch does not completely solve the issue, "cannot run
l3fwd on virtio or other devices", because hw_ip_checksum may be
not supported by the devices. Currently we can:
a. remove this requirements, or
b. wait for virtio front end (pmd) to support it.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
It seems that for the most use cases, previous hash_multi_lookup provides
better performance, and more, sequential lookup can cause significant
performance drop.
This patch sets previously optional hash_multi_lookup method as default.
It also provides some minor optimizations such as queue drain only on used
tx ports.
Fixes: 94c54b4158d5 ("examples/l3fwd: rework exact-match")
Fixes: dc81ebbacaeb ("lpm: extend IPv4 next hop field")
Fixes: 64d3955de1de ("examples/l3fwd: fix ARM build")
Reported-by: Qian Xu <qian.q.xu@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Enable NEON support in exact match mode.
l3fwd example did not compile on ARM due to SSE2 instrincics used
in generic part.
Some instrinsins were used to initialize data structures and those were
replaced by ordinary structure initalization.
All SSE2 intrinsics used in forwarding, i.e. masking the IP/TCP header
are moved to single inline function and made arch-specific.
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Current implementation of Exact-Match uses different execution path than
for LPM. Unifying them allows to reuse big part of LPM code and sightly
increase performance of Exact-Match.
Main changes:
-------------
* Packet classification stage is separated from the rest of path for both
LPM and EM.
* Packet processing, modifying and transmit part is the same for LPM and EM
and mostly based on the current LPM implementation.
* Shared code is moved to the common file "l3fwd_sse.h".
* While sequential packet classification in EM path, seems to be faster
than using multi hash lookup, used before, it is used by default. Old
implementation is moved to the file l3fwd_em_hlm_sse.h and can be enabled
with HASH_LOOKUP_MULTI global define in compilation time.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The main problem with l3fwd is that it is too monolithic with everything
being in one file, and the various options all controlled by compile time
flags. This means that it's hard to read and understand, and when making
any changes, you need to go to a lot of work to try and ensure you cover
all the code paths, since a compile of the app will not touch large parts
of the l3fwd codebase.
Following changes were done to fix the issues mentioned above
- Split out the various lpm and hash specific functionality into separate
files, so that l3fwd code has one file for common code e.g. args
processing, mempool creation, and then individual files for the various
forwarding approaches.
Following are new file lists
main.c (Common code for args processing, memppol creation, etc)
l3fwd_em.c (Hash/Exact match aka 'EM' functionality)
l3fwd_em_sse.h (SSE4_1 buffer optimizated 'EM' code)
l3fwd_lpm.c (Longest Prefix Match aka 'LPM' functionality)
l3fwd_lpm_sse.h (SSE4_1 buffer optimizated 'LPM' code)
l3fwd.h (Common include for 'EM' and 'LPM')
- The choosing of the lpm/hash path should be done at runtime, not
compile time, via a command-line argument. This will ensure that
both code paths get compiled in a single go
Following examples show runtime options provided
Select 'LPM' or 'EM' based on run time selection f.e.
> l3fwd -c 0x1 -n 1 -- -p 0x1 -E ... (EM)
> l3fwd -c 0x1 -n 1 -- -p 0x1 -L ... (LPM)
Options "E" and "L" are mutualy-exclusive.
If none selected, "L" is default.
Signed-off-by: Ravi Kerur <rkerur@gmail.com>
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Tested-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
