cryptodevs which support rte_security PDCP protocol,
can run all PDCP cases if it sets a feature flag
RTE_CRYPTODEV_FF_SECURITY. Previously, only dpaa2_sec
and dpaa_sec test suites were running these tests.
Now it is moved to generic test suite with a check
on the feature flag and the case will be skipped if it
is not supported by the PMD.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
The session init routine rte_cryptodev_sym_session_init(),
could return -ENOTSUP when the requested algo combination
is not supported by the PMD. This should be treated as
unsupported feature.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
There were some PMD specific checks to skip the case if
it is not supported. This patch checks the feature flag
RTE_CRYPTODEV_FF_SYM_SESSIONLESS if PMD supports it or not.
Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Checked the PMD feature flag list to identify if
inplace or OOP SGLs are supported or not. If not supported
the cases are skipped.
Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Skipped the test cases for the PMDs which do not support
RTE_CRYPTODEV_FF_NON_BYTE_ALIGNED_DATA and subsequently
removed the PMD specific checks for running that case.
Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Some wireless algos like SNOW, ZUC may support input
data in bits which are not byte aligned. However, not
all PMDs can support this requirement. Hence added a
new feature flag RTE_CRYPTODEV_FF_NON_BYTE_ALIGNED_DATA
to identify which all PMDs can support non-byte aligned
data.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
gcc 10 defaults to -fno-common and as a result when linking
with crypto drivers:
drivers/librte_pmd_dpaa_sec.a(crypto_dpaa_sec_dpaa_sec.c.o):
(.bss+0x4): multiple definition of `rta_sec_era';
drivers/librte_pmd_caam_jr.a(crypto_caam_jr_caam_jr.c.o):
(.bss+0x0): first defined here
drivers/librte_pmd_dpaa2_sec.a(crypto_dpaa2_sec_dpaa2_sec_dpseci.c.o):
(.data+0x0): multiple definition of `rta_sec_era';
drivers/librte_pmd_caam_jr.a(crypto_caam_jr_caam_jr.c.o):
(.bss+0x0): first defined here
This is a blunt fix for the issue by enabling fcommon for
dpaa_sec/dpaa2_sec/caam_jr.
Bugzilla ID: 469
Cc: stable@dpdk.org
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The return values in cases of errors were not
specified properly. With this patch appropriate
error numbers are returned.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The return values in cases of errors were not
specified properly. With this patch appropriate
error numbers are returned.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The session init routine rte_cryptodev_sym_session_init(),
could return -ENOTSUP when the requested algo combination
is not supported by the PMD. This should be treated as
unsupported features. For other return values like -EINVAL
or -ENOMEM the test can be treated as failure.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Few of the NIST TDES test files don't contain TDES string.
Added indicators to identify such files. These indicators
are part of only NIST TDES test vector files.
Fixes: 527cbf3d5e ("examples/fips_validation: support TDES parsing")
Cc: stable@dpdk.org
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Ayuj Verma <ayverma@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
This patch removed the non-essential check for NULL pointer.
Coverity issue: 357770
Fixes: c13cecf60f ("compress/qat: support IM buffer too small operation")
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch fixes enqueued and dequeued count statistics that should
contain the number of operations enqueued by the end user app
instead of the total number of QAT requests - bigger in case of
a multiple-request dynamic Huffman compression operation.
Fixes: c13cecf60f ("compress/qat: support IM buffer too small operation")
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Function create_ipsec_esp_flow returns a negative number in case of any
failure and we are passing this to strerror to display the error message.
But strerror()'s argument cannot be negative.
In case of failure, displaying exact error message to console is handled
in create_ipsec_esp_flow function.
So it is not required to print the error message again using strerror.
This patch will remove the unnecessary calling of strerror function
to fix the negative argument passing to strerror issue.
Coverity issue: 357691
Fixes: 6738c0a956 ("examples/ipsec-secgw: support flow director")
Signed-off-by: Praveen Shetty <praveen.shetty@intel.com>
Acked-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
gcc 10 defaults to fno-common and it reports:
crypto_kasumi_rte_kasumi_pmd_ops.c.o:(.data.rel+0x0):
multiple definition of `rte_kasumi_pmd_ops';
crypto_kasumi_rte_kasumi_pmd.c.o:(.bss+0x8): first defined here
Fix by making rte_kasumi_pmd_ops extern in the header file.
Fixes: 2773c86d06 ("crypto/kasumi: add driver for KASUMI library")
Cc: stable@dpdk.org
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
For null cipher the iv length should be set to zero.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch repairs 2 memory allocations issues:
1) possible leak of memory
In cryptodev_dpaa_sec_probe() function in case of portal
initialization failure, function exited without cleanup.
The patch redirects flow to out label, which provides
proper cleanup in case of error: freeing cryptodevice private
data and releasing cryptodevice.
2) double free of cryptodev private data
The function dpaa_sec_dev_init() in case of failure called
dpaa_sec_uninit() which freed both private data and security
context. However one layer above in cryptodev_dpaa_sec_probe()
function, the private data were freed one more time.
The patch limits cleanup of the dpaa_sec_dev_init() function
to freeing only the security context.
Signed-off-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch fixes management of memory for authentication
and encryption keys.
There were two issues with former state of implementation:
1) Invalid access to dpaa_sec_session union members
The dpaa_sec_session structure includes an anonymous union:
union {
struct {...} aead_key;
struct {
struct {...} cipher_key;
struct {...} auth_key;
};
};
Depending on the used algorithm a rte_zmalloc() function
allocated memory that was kept in aead_key, cipher_key
or auth_key. However every time the memory was released,
rte_free() was called only on cipher and auth keys, even
if pointer to allocated memory was stored in aead_key.
The C language specification defines such behavior as undefined.
As the cipher_key and aead_key are similar, have same sizes and
alignment, it has worked, but it's directly against C specification.
This patch fixes this, providing a free_session_data() function
to free the keys data. It verifies which algorithm was used
(aead or auth+cipher) and frees proper part of the union.
2) Some keys might have been freed multiple times
In functions like: dpaa_sec_cipher_init(), dpaa_sec_auth_init(),
dpaa_sec_chain_init(), dpaa_sec_aead_init() keys data were freed
before returning due to some error conditions. However the pointers
were not zeroed causing another calls to ret_free from higher
layers of code. This causes an error log about invalid memory address
to be printed.
This patch fixes it by making only one layer responsible for freeing
memory
Signed-off-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch fixes missing queue head update that occurred when
a multiple-request dynamic Huffman compression operation was not
complete within one qat_dequeue_op_burst function call.
Fixes: c13cecf60f ("compress/qat: support IM buffer too small operation")
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Tested-by: Xinfeng Zhao <xinfengx.zhao@intel.com>
As more test cases are defined for execution, test scripts structure
needs to be reorganized, so fewer files are needed to describe the test.
To achieve that, new environment variables are incorporated into the
scripts.
Additionally, tests for mixed tunnel protocols are added.
Signed-off-by: Mariusz Drost <mariuszx.drost@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Offset of cd pointer is too big by state1size + state2size, so few extra
unnecessary bytes will be copied into cd. Snow offset was improved as well.
Fixes: d9b7d5bbc8 ("crypto/qat: add ZUC EEA3/EIA3 capability")
Cc: stable@dpdk.org
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch disables displaying sample test vector contents when
executing throughput and latency tests as the sample data is not
used in those tests (not copied to input mbuf in order to achieve
better performance).
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Zero is a valid fd. When ccp_probe_device() is failed, the uio_fd won't be
closed thus leading fd leak.
Fixes: ef4b04f87f ("crypto/ccp: support device init")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Ravi Kumar <ravi1.kumar@amd.com>
For SA outbound packets, rte_atomic64_add_return is used to generate
SQN atomically. Use C11 atomics with RELAXED ordering for outbound SQN
update instead of rte_atomic ops which enforce unnecessary barriers on
aarch64.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
After re-enabling checks for non-implemented ops in non-debug mode
in librte_security set_pkt_metadata and get_userdata functions,
tests verifying proper work of tests can be enabled also.
Signed-off-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
When adding support for DOCSIS AES-256,
when setting the cipher parameters, all key sizes
were accepted, but only 128-bit and 256-bit keys
are supported.
Fixes: 9536622b86 ("crypto/aesni_mb: support DOCSIS AES-256")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Mairtin o Loingsigh <mairtin.oloingsigh@intel.com>
Add new test-case to measure performance of
IPsec data-path functions.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Check if session is valid after getting operation
out of the internal IPSec MB manager, in case the
session has been freed while the operation was still
inside the manager.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Several doxygen markup were incorrect in header files.
Fixes: 4935e1e9f7 ("bbdev: introduce wireless base band device lib")
Cc: stable@dpdk.org
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This commit fixes failures of the flow_classify_autotest when
ran on dual-socket servers, as the sample application does not
support more than a single socket. Increasing the NB_SOCKETS
value allows the test to run successfully.
Fixes: 9c9befea4f ("test: add flow classify unit tests")
Cc: stable@dpdk.org
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The autotest application build was partially enabled for building with
the net/bond driver disabled, but a number of items were missed, leading
to build errors when the driver was disabled, e.g. by simply doing
"-Ddisable_drivers=net/*" when calling meson.
../app/test/test_link_bonding.c:25:10: fatal error: rte_eth_bond.h: \
No such file or directory
With this fix in place, it's possible to build DPDK with meson with all
non-bus, non-mempool drivers disabled i.e. using meson option
-Ddisable_drivers=baseband/*,compress/*,crypto/*,event/*,net/*,raw/*,vdpa/*
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Tested-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Currently, thread waiting on an interrupt does not have a timeout, so
it will not ever wake up until traffic arrives. This means that, when
time comes to exit the application, it will not quit unless there
happens to be traffic coming in and waking up the thread from sleep.
Fix it so that the interrupt thread sleeps for 10ms before waking up
and attempting to poll again. Additionally, remove the log message
to avoid spamming about entering interrupt mode.
Fixes: 613ce6691c ("examples/l3fwd-power: implement proper shutdown")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Tested-by: Lihong Ma <lihongx.ma@intel.com>
Can be reproduced with "make EXTRA_CFLAGS='-O1'" command using
gcc 7.3.0
Build error
In file included from .../drivers/event/octeontx2/ot
x2_evdev.c:15:0:
.../drivers/event/octeontx2/otx2_evdev_stats.h:
In function ‘otx2_sso_xstats_get’:
.../drivers/event/octeontx2/otx2_evdev_stats.h:124:9:
error: ‘xstats’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
xstat = &xstats[ids[i] - start_offset];
~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is false positive, 'xstats_mode_count' should be preventing taking
the loop and accessing 'xstats'.
Returning in that case to silence the compiler warning.
Reported-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Can be reproduced with "make EXTRA_CFLAGS='-O1'" command using
gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2)
Build error:
.../drivers/net/ena/ena_ethdev.c: In function ‘eth_ena_dev_init’:
.../drivers/net/ena/ena_ethdev.c:1815:20:
error: ‘wd_state’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
1815 | adapter->wd_state = wd_state;
| ~~~~~~~~~~~~~~~~~~^~~~~~~~~~
This looks like false positive, fixing by assigning initial value to
'wd_state' variable.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
Can be reproduced with "make EXTRA_CFLAGS='-O1'" command using
gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2)
Build error:
In file included from .../drivers/mempool/octeontx2/otx2_mempool.h:13,
from .../drivers/mempool/octeontx2/otx2_mempool_ops.c:8:
.../drivers/mempool/octeontx2/otx2_mempool_ops.c:
In function ‘otx2_npa_alloc’:
.../drivers/common/octeontx2/otx2_common.h:94:2:
error: ‘aura_handle’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
94 | rte_log(RTE_LOG_DEBUG, otx2_logtype_ ## subsystem, \
| ^~~~~~~
.../drivers/mempool/octeontx2/otx2_mempool_ops.c:643:11:
note: ‘aura_handle’ was declared here
643 | uint64_t aura_handle;
| ^~~~~~~~~~~
This looks like false positive, assigning an initial value to
'aura_handle' to fix the build error.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Can be reproduced with "make EXTRA_CFLAGS='-O1'" command using
gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2)
Two build errors:
1)
In file included from .../build/include/rte_ring_elem.h:1093,
from .../lib/librte_rcu/rte_rcu_qsbr.c:21:
../lib/librte_rcu/rte_rcu_qsbr.c: In function ‘rte_rcu_qsbr_dq_reclaim’:
.../build/include/rte_ring_peek.h:282:22:
error: ‘avail’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
282 | *available = avail - n;
| ~~~~~~^~~
./build/include/rte_ring_peek.h:259:11: note: ‘avail’ was declared here
259 | uint32_t avail, head, next;
| ^~~~~
2)
In file included from .../build/include/rte_ring_elem.h:1093,
from .../build/include/rte_ring.h:405,
from .../app/test/test_ring_stress.h:13,
from .../app/test/test_ring_stress_impl.h:5,
from .../app/test/test_ring_peek_stress.c:5:
.../app/test/test_ring_peek_stress.c: In function ‘_st_ring_enqueue_bulk’:
.../build/include/rte_ring_peek.h:80:22:
error: ‘free’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
80 | *free_space = free - n;
| ~~~~~^~~
.../build/include/rte_ring_peek.h:60:11: note: ‘free’ was declared here
60 | uint32_t free, head, next;
| ^~~~
The cases shouldn't be hit, and it looks like there is already logic
error if it has been hit, but assigning 'avail' & 'free' to '0' to fix
the build error.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This commit fixes a segfault on exit by using Ctrl^C if the master lcore
was also being used as a worker core. The root cause of the issue was
that the interrupt handler was cleaning up resources such as the ethdev
and eventdev ports, and once the interrupt handler would return, that
thread would continue working as an eventdev worker, and dereference the
memory which just had free() called on it.
Fixed by moving the cleanup code from the interrupt handler to the
cleanup stage of main(), which the master thread will execute once
it has returned from its worker() functionality.
Fixes: 085edac2ca ("examples/eventdev_pipeline: support Tx adapter")
Cc: stable@dpdk.org
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Tested-by: Jun W Zhou <junx.w.zhou@intel.com>
Caught while running testpmd:
No telemetry legacy support- No legacy callbacks, legacy socket not createdInteractive-mode selected
Add missing \n.
Fixes: 6dd571fd07 ("telemetry: introduce new functionality")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
telemetry can not depend on EAL anymore but it still wants to get arch
headers.
We directly point at the right source directories by using the same logic
than EAL. However the special case of armv7 has been missed.
Fix this by defaulting ARCH_DIR to RTE_ARCH.
Caught on OBS:
[ 162s] SYMLINK-FILE include/rte_telemetry.h
[ 162s] CC telemetry.o
[ 162s] CC telemetry_data.o
[ 162s] CC telemetry_legacy.o
[ 162s] .../lib/librte_telemetry/telemetry.c:15:10: fatal error:
rte_spinlock.h: No such file or directory
[ 162s] #include <rte_spinlock.h>
[ 162s] ^~~~~~~~~~~~~~~~
[ 162s] compilation terminated.
Fixes: 6dd571fd07 ("telemetry: introduce new functionality")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The size checking is done in the caller. The size parameter is an
unsigned (64b wide) right now, so the comparison with zero should be
enough in most cases. But it won't help in the following case.
If the allocating request input a huge number by mistake, e.g., some
overflow after the calculation (especially subtraction), the checking
in the caller will succeed since it is not zero. Indeed, there is not
enough space in the system to support such huge memory allocation.
Usually it will return failure in the following code. But if the
input size is just a little smaller than the UINT64_MAX, like -2 in
signed type.
The roundup will cause an overflow and then "reset" the size to 0,
and then only a header (128B now) with zero length will be returned.
The following will be the previous allocation header.
It should be OK in most cases if the application won't access the
memory body. Or else, some critical issue will be caused and not easy
to debug. So this issue should be prevented at the beginning, like
other big size failure, NULL pointer should be returned also.
Fixes: fdf20fa7be ("add prefix to cache line macros")
Cc: stable@dpdk.org
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
MBUF pool of size 8192 was causing packet loss when using four ports. To
fix this issue this patch specifies the number of MBUF's per port
instead of having one set MBUF pool size, this way it will adapt to any
number of ports.
Fixes: e64833f227 ("examples/l2fwd-keepalive: add sample application")
Cc: stable@dpdk.org
Signed-off-by: Louise Kilheeney <louise.kilheeney@intel.com>
Tested-by: Xi Zhang <xix.zhang@intel.com>
Add support for Ice Lake IOAT DMA engine PCI Device ID.
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
rte_bus_scan API scans all the available PCI devices irrespective of white
or black listing parameters then further devices are probed based on white
or black listing parameters. So unnecessary CPU cycles are wasted during
rte_pci_scan.
For Octeontx2 platform with core frequency 2.4 Ghz, rte_bus_scan consumes
around 26ms to scan around 90 PCI devices but all may not be used by the
application. So for the application which uses 2 NICs, rte_bus_scan
consumes few microseconds and rest time is saved with this patch.
Patch restricts devices to be scanned as per below mentioned conditions:
- All devices will be scanned if no parameters are passed.
- Only white listed devices will be scanned if white list is available.
- All devices, except black listed, will be scanned if black list is
available.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Gaetan Rivet <grive@u256.net>
rte_pci_probe() is private to the PCI bus.
Clean the remaining references in the documentation and comments.
Fixes: c752998b5e ("pci: introduce library and driver")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Gaetan Rivet <grive@u256.net>
Some machines may have a lot of PCI devices and all of them are
not bound to DPDK. In such case the logs from EAL creates a lot of
clutter on boot-up, typically one needs to scroll the screen to
find other issues in boot-up.
This patch changes the following to reduce the clutter in
the default boot-up logs.
- Change the log-level of PCI probes to `debug`
- Introduce new driver probe as `info` log-level for the successful probe.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
The runstate, comp_runstate and app_runstate are used as guard variables
in the service core lib. To guarantee the inter-threads visibility of
these guard variables, it uses rte_smp_r/wmb. This patch use c11 atomic
built-ins to relax these barriers.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The num_mapped_cores is used as a statistics. Use c11 atomics with
RELAXED ordering for num_mapped_cores instead of rte_atomic ops which
enforce unnessary barriers on aarch64.
Replace execute_lock operations to spinlock_try_lock to avoid duplicate
code.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The service id validation is duplicated, remove the redundant code
in the calling functions.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
clean up rte prefix from static functions.
remove unused parameter for service_dump_one function.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The logic to identify if the MT unsafe service is running on another
core can return -EBUSY spuriously. In such cases, running the service
becomes costlier than using atomic operations. Assume that the
application passes the right parameters and reduce the number of
instructions for all cases.
Cc: stable@dpdk.org
Fixes: 8d39d3e237 ("service: fix race in service on app lcore function")
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
