This is to enable user space vhost receiving and forwarding broadcast
and multicast packets:
Use new option in command line to enable promisc mode;
Enable 2 bits in VMDQ RX mode: ETH_VMDQ_ACCEPT_BROADCAST and ETH_VMDQ_ACCEPT_MULTICAST.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Config PFVML2FLT register in ixgbe PMD to enable it receive broadcast and multicast packets;
also factorize the common logic with ixgbe_set_pool_rx_mode.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Config VM offload register in igb PMD to enable it receive broadcast and multicast packets.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add vmdq rx mode field into rx config struct, it is flag from ETH_VMDQ_ACCEPT_*.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Adding this check is to avoid breakage from future data structure changes.
Signed-off-by: Jia Yu <jyu@vmware.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Since commit 08b563ffb19 ("mbuf: replace data pointer by an offset"),
KNI vhost compilation (CONFIG_RTE_KNI_VHOST=y) was broken.
rte_pktmbuf_mtod() is not used in the kernel context but is replaced
by a simple addition of the base address and the offset.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add in some additional comments around more complex areas of the code
so as to make the code easier to read and understand.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Following the big headers rework, all C++ stuff has moved to arch-specific
headers. The generic headers should not contain this so that this is done only
once.
There was a remaining #ifdef __cplusplus in "eal: split CPU cycle operation to
architecture specific" (fa4001c30ee9).
Reported-by: Keunhong Lee <dlrmsghd@gmail.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Since commit d798a94 ("mac vlan filter"),
ICC reports this error:
lib/librte_pmd_i40e/i40e_ethdev.c(1763): error #188:
enumerated type mixed with another type
Indeed, RTE_ETH_FILTER_NONE comes from enum rte_filter_type but
enum rte_filter_op is expected.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Configurable CRC stripping needs to be supported in VF,
and the configuration should be finally set in relevant
RX queue context with PF host support.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Support of configurable crc stripping in context of
VF RX queues.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Rename some local variables to express more accurately
and briefly. Fix several code style issues reported by
checkpatch.pl. Line warpping for some source lines which
has more than 80 characters, and merge lines together for
those source lines which does not need any line wrapping
actually. Add macros for numeric or calculating memory
sizes.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
API version number is straightfoward enough for checking
the PF host, and no need to use 'host_is_dpdk'.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Commit aec8283d47 fixes the compilation issue, but it leads to
one runtime issue: early exit wrongly. In some case, 'path' is NULL, but
'resolved_path' has effective path, it should continue going ahead rather
than exit.
This is due to that qemu unlink the file after it maps the huge page file.
In this special case, it is ok to check the resolved path
when path is NULL if errno indicates "No such file or directory".
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Fix alignment issues, lengthy lines, misordered type and other coding style issues.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
No need to keep the same code duplicated for 32 and 64bits x86.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Chao Zhu <bjzhuc@cn.ibm.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Architecture can have their own specific headers, just install all headers from
arch directory.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Chao Zhu <bjzhuc@cn.ibm.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch splits CPU flags related operations from DPDK and push them
to architecture specific arch directories, so that other processor
architecture can implement its own CPU flag functions to support DPDK.
Signed-off-by: Chao Zhu <bjzhuc@cn.ibm.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch splits the SSE based memory copy function from DPDK and push
them to architecture specific arch directories. Other processor
architecture can implement its own vector based memory copy functions.
Signed-off-by: Chao Zhu <bjzhuc@cn.ibm.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch splits the spinlock operations from DPDK and push them to
architecture specific arch directories, so that other processor
architecture to support DPDK can be easily adopted.
Signed-off-by: Chao Zhu <bjzhuc@cn.ibm.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch splits the prefetch operations from DPDK and push them to
architecture specific arch directories, so that other processor
architecture to support DPDK can implement their own functions.
Signed-off-by: Chao Zhu <bjzhuc@cn.ibm.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch splits the CPU TSC read operations from DPDK and push them to
architecture specific arch directories, so that other processors that
don't have tsc register can implement its own functions.
Signed-off-by: Chao Zhu <bjzhuc@cn.ibm.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch splits the byte order operations from DPDK and push them to
architecture specific arch directories, so that other processor
architecture to support DPDK can be easily adopted.
Signed-off-by: Chao Zhu <bjzhuc@cn.ibm.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch first adds architecture specific directories to eal.
Then split the atomic operations to architecture specific and generic files.
Architecture specific files are put into the corresponding architecture
directory and common header are put into generic directory.
Update documentation generation with new generic/ directory.
Signed-off-by: Chao Zhu <bjzhuc@cn.ibm.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
On FreeBSD, when initializing a secondary process,
EAL was complaining if there were ports not bound
to nic_uio module, exiting the application, which
should not happen, as this is expected behaviour,
and not an error
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
When using Intel C++ compiler(icc) 14.0.1.106 or the older icc 13.x
version, the mbuf initializer variable was not getting configured
correctly, as the mb_def variable was not set correctly. This is due
to an issue with icc (DPD200249565 which already been fixed in
icc 14.0.2 and newer compiler release) where it incorrectly calculates
the field offsets with initializers when zero-sized fields
are used in a structure.
To work around this, the code in ixgbe_rxq_vec_setup does not setup the
fields using an initializer, but instead assigns the values individually
in code.
NOTE: There is no performance impact to this change as the queue
setup functions are not data-plane APIs, but are only used at app
initialization.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The commit 15dbb63ef9e9 ("VXLAN packet identification") didn't compile,
if CONFIG_RTE_LIBRTE_I40E_DEBUG_DRIVER is enabled.
Signed-off-by: Choonho Son <choonho.son@gmail.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
1. Function i40e_vsi_* name change to i40e_dev_* since PF can contains
more than 1 VSI after VMDQ enabled.
2. i40e_dev_rx/tx_queue_setup change to have capability of setup
queues that belongs to VMDQ pools.
3. Add queue mapping. This will do a convertion between queue index
that application used and real NIC queue index.
3. i40e_dev_start/stop change to have capability switching VMDQ queues.
4. i40e_pf_config_rss change to calculate actual main VSI queue numbers
after VMDQ pools introduced.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Change i40e_macaddr_add and i40e_macaddr_remove functions to support
multiple macaddr add/delete. In the meanwhile, support macaddr ops
on different pools.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The change includes several parts:
1. Get maximum number of VMDQ pools supported in dev_init.
2. Fill VMDQ info in i40e_dev_info_get.
3. Setup VMDQ pools in i40e_dev_configure.
4. i40e_vsi_setup change to support creation of VMDQ VSI.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The change includes several parts:
1. Clear pool bitmap when trying to remove specific MAC.
2. Define RSS, DCB and VMDQ flags to combine rx_mq_mode.
3. Use 'struct' to replace 'union', which to expand the rx_adv_conf
arguments to better support RSS, DCB and VMDQ.
4. Fix bug in rte_eth_dev_config_restore function, which will restore
all MAC address to default pool.
5. Define additional 3 arguments for better VMDQ support.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
'PFINT_ICR0_ENA' shouldn't be cleared in user space ISR,
otherwise adminq interrupts might be missed during
co-working with VF initialization.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
As driver flag of 'RTE_PCI_DRV_INTR_LSC' was introduced
recently, it must be added in i40e. One second waiting
is needed for link up event, to wait the hardware into a
stable state, so the interrupt could be processed in two
parts. In addition, it should finally call the callback
function registered by application.
Test: http://dpdk.org/ml/archives/dev/2014-September/006091.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Reviewed-by: Jing Chen <jing.d.chen@intel.com>
Reviewed-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
To get the code cleaner and more straightforward, a macro
is defined for all interrupt cause enable flags. Two more
causes are enabled, and all the interrupt causes for
reporting any errors are compiled conditionally, as they
are for debug only.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Reviewed-by: Jing Chen <jing.d.chen@intel.com>
Reviewed-by: Jijiang Liu <jijiang.liu@intel.com>
To be more straightforward, two local variables in interrupt
handler are renamed.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Reviewed-by: Jing Chen <jing.d.chen@intel.com>
Reviewed-by: Jijiang Liu <jijiang.liu@intel.com>
This patch fixes two issues:
- one is to fix the log issues
- the other is to set filter type when updating the default MAC filter.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Use the enum type for filter type.
It fixes the compilation error under ICC compiler.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
It mainly add i40e_vf_mac_filter_set() function to support perfect match
and hash match of MAC address and VLAN ID for VF.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Yong Liu <yong.liu@intel.com>
This patch mainly optimizes the i40e_add_macvlan_filters() and
the i40e_remove_macvlan_filters() functions in order that
we are able to provide filter type configuration.
And another relevant MAC filter codes are changed based on new data structures.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Yong Liu <yong.liu@intel.com>
In the case where a userspace reports itself as Ubuntu, but the
kernel isn't providing the expected version signature interface,
turn off Ubuntu specializations.
This situation happens often enough in development environments,
and with multi-distribution build servers (e.g. chroot, containers).
Signed-off-by: Alexander Guy <alexander@andern.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
rte_ipv4_fragment_packet() and rte_ipv6_fragment packet()
call rte_pktmbuf_attach() to attach the segment of the original
packet to the segment of the new fragmented one. Such function
is not declared if RTE_MBUF_REFCNT is disabled, as it needs to
call rte_mbuf_refcnt_update, not declared either.
Therefore, the ipv4/v6 fragmentation libraries are disabled
in that situation.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
If the vector pmd option is turned on in the compile time config file,
then always call the vector rxq setup, since we can now use the vector
PMD for receiving jumbo frames that need chained mbufs, a.k.a scattered
packets. Up till now, this function was not being called when receiving
scattered packets, potentially leading to problems with mbufs not being
properly initialized.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Changchun Ouyang <Changchun.ouyang@intel.com>
Remove the "static" prefix to the template mbuf variable in
ixgbe_rxq_vec_setup function. This will then allow different
threads to initialize different RX queues at the same time,
without one overwriting the other's data.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Changchun Ouyang <Changchun.ouyang@intel.com>
It fixes this compilation complain: "error: ignoring return value of 'realpath',
declared with attribute warn_unused_result [-Werror=unused-result]"
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Tested-by: Jingguo Fu <jingguox.fu@intel.com>
