Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The function rte_eth_dev_count_total() was introduced one year ago
in the release 18.05. It can be declared non experimental in 19.05.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Some port iterations are manually checking against RTE_ETH_DEV_UNUSED
instead of using the iterators based on rte_eth_find_next().
A new macro RTE_ETH_FOREACH_VALID_DEV() is introduced, but kept private
because there should be no need of iterating over all devices in the
API. The public iterators have additional filters for ownership, parent
device or sibling ports.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
As stated in the deprecation notice from December 2016,
"the legacy filter API, including rte_eth_dev_filter_supported(),
rte_eth_dev_filter_ctrl() as well as filter types MACVLAN, ETHERTYPE,
FLEXIBLE, SYN, NTUPLE, TUNNEL, FDIR, HASH and L2_TUNNEL, is superseded
by the generic flow API (rte_flow)".
After a long wait of more than two years, the legacy filter API
is marked as deprecated, while still tested with testpmd and
the tep_termination example.
The next step will be to announce a deadline for complete removal.
As preparation of the removal of rte_eth_ctrl.h,
RTE_ETH_FLOW_*, RTE_TUNNEL_TYPE_* and RTE_ETH_HASH_FUNCTION_* definitions
are moved to rte_ethdev.h and rte_flow.h.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch implements the changes proposed in the deprecation
note[1]. Replace multiple color definitions in various places such as
rte_meter.h, rte_tm.h and rte_mtr.h with single rte_color defined
in rte_meter.h.
This is simple search and replace exercise without any implementation
change.
[1] https://mails.dpdk.org/archives/dev/2019-January/123861.html
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Clarify the fact that mask bits should be set in rte_eth_reta_query.
Signed-off-by: Tom Barbette <barbette@kth.se>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch added VXLAN-GPE macro in rte_eth_tunnel_type.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
If multiple ports share the same hardware device (rte_device),
they are siblings and can be found thanks to the new functions
and loop macros.
One iterator takes a port id as reference,
while the other one directly refers to the parent device.
The ownership is not checked because siblings may have
different owners.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Tested-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
There are three states for an ethdev port.
Checking that the port is unused looks simpler than
checking it is neither attached nor removed.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Tested-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
For files that already have rte_string_fns.h included in them, we can
do a straight replacement of snprintf(..."%s",...) with strlcpy. The
changes in this patch were auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy-with-header.cocci --dir . --in-place
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This addresses the usability issue raised by OVS at DPDK Userspace
summit. It adds general min/max MTU into device info. For compatibility,
and to save space, it fits in a hole in existing structure.
The initial version sets max MTU to normal Ethernet, it is up to
PMD to set larger value if it supports Jumbo frames.
Also remove the deprecation notice introduced in 18.11 regarding this
change and bump ethdev ABI version.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Ian Stokes <ian.stokes@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Do not allow creating an Ethernet device with a name over the
allowed maximum (or zero length).
This is safer than silently truncating which is what happens now.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ali Alnubani <alialnu@mellanox.com>
All-multicast is a part of receive mode configuration and it is
better to mention explicitly that it is retained across restart.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The documentation says MAC addresses array is retained and
it is logical to assume that default MAC address is retained
as well.
Also some PMDs do not allow to change the default MAC in
running state (see RTE_ETH_DEV_NOLIVE_MAC_ADDR).
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Changing MTU in running state may return -EBUSY saying that
MTU cannot be changed when the port is running. It assumes
that changes may be done in stopped and started (but some
PMDs may reject it) state and it is logical to require that
changes done in any of these states are retained.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This patch fixes rte_ethdev header file to use the correct method name,
namely to use rte_eth_dev_info_get() instead of
rte_eth_dev_infos_get().
Fixes: a4996bd89c ("ethdev: new Rx/Tx offloads API")
Fixes: 4f5701f28b ("examples: fix RSS hash function configuration")
Cc: stable@dpdk.org
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Don't need to use snprintf for simple name copy.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Rami Rosen <ramirose@gmail.com>
The set_port_owner was copying a string between structures of the
same type, therefore the name could never be truncated (unless source
string was not null terminated). Use strlcpy which does it better.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
When removing the old attach function, the racy variable for getting
the last port id became unused.
Fixes: c9cce42876 ("ethdev: remove deprecated attach/detach functions")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
rte_errno should be set to positive value from errno.h plus
few RTE-specific values.
Fixes: 4fb7e803eb ("ethdev: add Tx preparation")
Fixes: 439a90b5f2 ("ethdev: reorder inline functions")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Currently this api doesn't report error if name is
truncated and so user is not sure about uniqueness
of name. This change reports error to help user.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The Tx prepare API was introduced at a time when the experimental API
tag mechanism did not exist yet and is missing the tag.
However, this API has been there since 17.02 and did not suffer any
change since its introduction.
Let's just remove the warning from the documentation.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Added new rte_color definition in librte_meter to
consolidate color definition which is currently replicated
in various places such as rte_meter.h, rte_tm.h and rte_mtr.h
Created aliases for rte_tm_color, rte_mtr_color and rte_meter_color
to use new rte_color values.
The definitions of rte_tm_color, rte_mtr_color and rte_meter_color
will be deprecated in future.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
DEFERRED state replaced by ownership concept and it is no more used as
code comment states.
ethdev ABI broken on this release use this opportunity to remove
DEFERRED state.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Matan Azrad <matan@mellanox.com>
`local_conf` variable was needed for offload conversions but no more
required. No functional difference, only interim variable eliminated.
Fixes: ab3ce1e0c1 ("ethdev: remove old offload API")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
The device information cannot be gotten correctly before
the configuration is set. Because on some NICs the
information has dependence on the configuration.
Fixes: 3be82f5cc5 ("ethdev: support PMD-tuned Tx/Rx parameters")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
The new configuration is stored during the rte_eth_dev_configure() API
but the API may fail. After failure stored configuration will be
invalid since it is not fully applied to the device.
We better roll the configuration back after failure.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
After removing the function rte_eth_dev_attach(),
there are two replacement solutions possible:
one using probe event notification, and one using a new iterator.
So the application can get the new probed ports either asynchronously
or synchronously.
The iterator API is new in DPDK 18.11 so they got the experimental
tag by policy. It causes an issue for strict applications which do
not use experimental functions, and want to use the synchronous method.
The replacement for removed API should not be experimental.
That's why the experimental status of the ethdev iterator is removed.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Tested-by: Kevin Traynor <ktraynor@redhat.com>
Some global variables can indeed be static, add static keyword to them.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The offload name functions are useful, but since they are
marked experimental they can not be used by upstream projects.
For example, VPP duplicates the same table in its code.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The iterator was matching all representors if it was not specified
in the devargs string. It was a wrong default behaviour.
If there is no representor parameter in the devargs, the iterator
should not match any representor port.
The implementation of the default behaviour would be simpler
if a "no match" handler is added to rte_kvargs_process().
As it requires an API breakage, it will be reworked later.
Fixes: a7d3c6271d ("ethdev: support representor id as iterator filter")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
If a port is being created and rollbacked because of an error,
the event RTE_ETH_EVENT_DESTROY should not be sent.
It makes no sense to receive a destroy event for a port which
was not yet announced via RTE_ETH_EVENT_NEW.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The MAC addresses of a port can be matched with devargs.
As the conflict between rte_ether.h and netinet/ether.h is not resolved,
the MAC parsing is done with a rte_cmdline function.
As a result, cmdline library becomes a dependency of ethdev.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
The representor id is added in rte_eth_dev_data in order to be able
to match a port with its representor id in devargs.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
The functions for representor devargs parsing were static
in the file rte_ethdev.c.
In order to reuse them in the file rte_class_eth.c,
they are moved to the files ethdev_private.c/.h.
A log is fixed by adding a missing line feed.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
The hotplug attach/detach features are implemented in EAL layer.
There is a new ethdev iterator to retrieve ports from ethdev layer.
As announced earlier, the (buggy) ethdev functions are now removed.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
If no rte_device is given in the iterator,
eth_dev_match() is looking at all ports without any restriction,
except the ethdev kvargs filter.
It allows to iterate with a devargs filter referencing only
some ethdev parameters. The format (from the new devargs syntax) is:
class=eth,paramY=Y
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
The iterator will return the ethdev port ids matching a devargs string.
It is recommended to use the macro RTE_ETH_FOREACH_MATCHING_DEV()
for usage convenience.
The class string is prefixed with '+' in order to skip the validation
of the parameter keys. It is tolerated for the compatibility with
the old (current) syntax where all parameters (bus, class and driver)
are mixed in the same string without any delimiter.
Thanks to this compatibility prefix, the driver parameters will be
skipped during the ethdev parsing, and not considered invalid.
A macro is introduced in rte_common.h to workaround a const field.
This hack is needed to free const strings in the iterator.
It is preferred to keep the const for these fields, because it gives
a hint that they are not changed at each iteration.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Currenlty the encap/decap actions only support encapsulation
of VXLAN and NVGRE L2 packets (L2 encapsulation is where
the inner packet has a valid Ethernet header, while L3 encapsulation
is where the inner packet doesn't have the Ethernet header).
In addtion the parameter to to the encap action is a list of rte items,
this results in 2 extra translation, between the application to the
actioni and from the action to the NIC. This results in negative impact
on the insertion performance.
Looking forward there are going to be a need to support many more tunnel
encapsulations. For example MPLSoGRE, MPLSoUDP.
Adding the new encapsulation will result in duplication of code.
For example the code for handling NVGRE and VXLAN are exactly the same,
and each new tunnel will have the same exact structure.
This patch introduce a raw encapsulation that can support L2 tunnel types
and L3 tunnel types. In addtion the new
encapsulations commands are using raw buffer inorder to save the
converstion time, both for the application and the PMD.
In order to encapsulate L3 tunnel type there is a need to use both
actions in the same rule: The decap to remove the L2 of the original
packet, and then encap command to encapsulate the packet with the
tunnel.
For decap L3 there is also a need to use both commands in the same flow
first the decap command to remove the outer tunnel header and then encap
to add the L2 header.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
As described in [1], a new rte_flow item is added to support metadata
to use as flow rule match pattern.
The metadata is an opaque item, fully controlled by the application.
The use of metadata is relevant for egress rules only.
It can be set in the flow rule using the RTE_FLOW_ITEM_META.
An additional member 'tx_metadata' is added in union with existing member
'hash' of struct 'rte_mbuf', located to avoid conflicts with existing
fields. This additional member is used to carry the metadata item.
Application should set the packet metadata in the mbuf dedicated field,
and set the PKT_TX_METADATA flag in the mbuf->ol_flags.
The NIC will use the packet metadata as match criteria for relevant
flow rules.
This patch introduces metadata item type for rte_flow RTE_FLOW_ITEM_META,
along with corresponding struct rte_flow_item_meta and ol_flag
PKT_TX_METADATA.
[1] "[RFC,v2] ethdev: support metadata as flow rule criteria"
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
After closing a port, it cannot be restarted.
So there is no reason to not free all associated resources.
The last step was done with rte_eth_dev_detach() which is deprecated.
Instead of blindly removing the associated rte_device, the driver should
check if no more port (ethdev, cryptodev, etc) is open for the device.
The last ethdev freeing which were done by rte_eth_dev_detach(),
are now done at the end of rte_eth_dev_close() if the driver supports
the flag RTE_ETH_DEV_CLOSE_REMOVE.
There will be a transition period for PMDs to enable this new flag
and migrate to the new behaviour.
When enabling RTE_ETH_DEV_CLOSE_REMOVE, the PMD must free all its
private resources for the port, in its dev_close function.
It is advised to call the dev_close function in the remove function
in order to support removing a device without closing its ports.
Some drivers does not allocate MAC addresses dynamically or separately.
In those cases, the pointer is set to NULL, in order to avoid wrongly
freeing them in rte_eth_dev_release_port().
A closed port will have the state RTE_ETH_DEV_UNUSED which is
considered as invalid by rte_eth_dev_is_valid_port().
So validity is not checked anymore for closed ports in testpmd.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
