This problem was discovered when passing invalid PCI id to the
blacklist API in devargs.
Any failures in rte_devargs_add would cause a core dump because
it would call rte_log() before the the EAL log environment was
initialized. Rather than try and log just remove the messages
and leave it up to the caller to check the return value.
Most of the other failure possibilities are when malloc() fails, and if
that happens any logging that used malloc() would also fail.
This failure was not caught by the standalone tests to devargs
because the tests are run after calling rte_eal_init (which is not
how devargs is intended to be used).
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Cleanup the code in bonding that checks ports.
* Use standard rte_eth_dev_is_valid_port
* Change name of driver string to avoid variable namespace conflicts
* Get rid of unnecessary string comparison stuff. A simple pointer
check is enough here.
* Get rid of unnecessary assignment of driver_name, it is already
done by common code.
* Don't generate unnecessary log messages on error.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Declan Doherty <declan.doherty@intel.com>
The function rte_eth_dev_is_valid_port is good way to have all
drivers using same function and solves several hotplug related
bugs from drivers not checking attached flag.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Change the log level of startup messages. Anything that is
just normal activity (like getting virtual areas) is changed
to debug level. Anything that is a failure should be NOTICE
or ERR severity.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The read for events in the interrupt thread may get interrupted
by signals from application. Avoid generating stray log message.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
I40e VF driver uses the num_queue_pairs in vf structure to construct
queue index look up table. When the nb_rx_queue is less than nb_tx_queue,
num_queue_pairs is equal to nb_tx_queue. It will make the table use
invalid queue index, then application cannot poll packets on these queues.
This patch also moves the inline function i40e_align_floor from
i40e_ethdev.c to i40e_ethdev.h.
Test report: http://dpdk.org/ml/archives/dev/2015-July/021838.html
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Qian Xu <qian.q.xu@intel.com>
Due to the NIC's firmware update, the input set of sctp flow is changed
to source IP, destination IP, source port, destination port and
Verification-Tag. This patch adds the sport and dport in the programming
packet of flow director.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Marvin Liu <yong.liu@intel.com>
At this point the stop() and close() functions have already been called.
The rte_eth_promiscuous_disable() function does not return on the VM.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Add function virtio_free_queues() and call from virtio_dev_close()
Use virtio_dev_rx_queue_release() and virtio_dev_tx_queue_release()
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Add functions virtio_dev_queue_release(), virtio_dev_rx_queue_release() and
virtio_dev_tx_queue_release().
Use queue_release in virtio_dev_uninit().
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
If vq is NULL, there is a segmentation fault.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
This patch depends on the Port Hotplug Framework.
It implements the eth_dev_uninit_t() function for virtio pmd.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Add i40e_dev_free_queues() function and call it from close() functions.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
There is a segmentation fault if rxq is NULL.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
_clear_cmd() was not being called in failure situations,
resulting in the next command also failing.
Fix several typos.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch depends on the Port Hotplug Framework.
It implements the eth_dev_uninit functions for rte_i40e_pmd and
rte_i40evf_pmd.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Add ixgbe_dev_free_queues() function and call it from close() functions.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch depends on the Port Hotplug Framework.
It implements the eth_dev_uninit functions for rte_ixgbe_pmd and
rte_ixgbevf_pmd.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Queues were freed in clear function called in stop function.
Split clearing and freeing in separate functions to
move queue freeing from stop to close function.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch depends on the Port Hotplug Framework.
It implements the eth_dev_uninit functions for rte_em_pmd,
rte_igb_pmd and rte_igbvf_pmd.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
The internal functions must be marked with the doxygen command @internal.
The allocate and release_port functions are not restricted only to dummy
drivers.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
There are close and detach functions in ethdev.
To keep a consistent naming, PCI functions called by ethdev detach
must be named "detach" instead of "close".
Fix also comments which mix close and uninit names.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This chapter is for ABI and API. That's why a renaming is required.
Remove also the examples which are now in the referenced guidelines.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Hash library uses optimized compare functions that use
x86 intrinsics, therefore non-x86 systems could not build
the library. In that case, the compare function is set
to the generic memcmp.
Fixes: 48a399119619 ("hash: replace with cuckoo hash implementation")
Reported-by: Zhigang Lu <zlu@ezchip.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Zhigang Lu <zlu@ezchip.com>
The following commit broke vhost sample when it runs in second time:
292959c71961acde0cda6e77e737bb0a4df1559c
It should call api to unregister vhost driver when sample exit/quit, then
the socket file will be removed(by calling unlink), and thus make vhost sample
work correctly in the second time startup.
Test report: http://dpdk.org/ml/archives/dev/2015-July/020896.html
Fixes: 292959c71961 ("vhost: cleanup unix socket")
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
It fixes the wrong log info when failing to unregister vhost driver.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
It adds more readable log info if a socket fails to bind to
local socket file name.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
proc_info displays statistics information including extended stats for
given DPDK ports and dumps the memory information for DPDK.
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
ierrors only included a base set of error statistics, this patch adds
additional error registers to ierrors.
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add the NIC/HW specific stats that were removed from rte_ethdev.c to
the extended stats in ixgbe.
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Remove non generic stats in rte_stats_strings and mark the relevant
fields in struct rte_eth_stats as deprecated.
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Extend rte_eth_xstats_get to retrieve additional stats from the device
driver as well the ethdev generic stats.
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Move stats register reads to ixgbe_read_stats_registers() as it will be
used by the functions to retrieve stats and extended stats.
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Right now the scheduler hierarchy is encoded as a bitfield
that is visible as part of the ABI. This creates an barrier
limiting future expansion of the hierarchy.
As a transistional step. hide the actual layout of the hierarchy
and mark the exposed structure as deprecated. This will allow for
expansion in later release.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The setup messages should be at DEBUG level since they are not
important for normal operation of system. The messages about
problems should be at NOTICE or ERR level.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
syslog does not like tabs in log messages; tab gets translated to #011
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Want to be able to build with RTE_SCHED_RED enabled but
allow disabling RED on a per-queue basis at runtime.
RED is disabled unless min/max thresholds set.
Signed-off-by: Stephen Hemmminger <stephen@networkplumber.org>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
add function to support ethtool ops:
- get_reg_length
- get_regs
- get_eeprom_length
- get_eeprom
- set_eeprom
Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com>
Acked-by: Andrew Harvey <agh@cisco.com>
Acked-by: David Harton <dharton@cisco.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
add function to support ethtool ops:
- get_reg_length
- get_regs
- get_eeprom_length
- get_eeprom
- set_eeprom
Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com>
Acked-by: Andrew Harvey <agh@cisco.com>
Acked-by: David Harton <dharton@cisco.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
