All link commands are merged into one command:
cmd_link_parsed.
Improve run command to allow run periodically.
Adding static keyword to a lot of token declarations.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add a couple of additional functions that will allow to parse many types
of input parameters, i.e.: bool, 16, 32, 64 bits, hex, etc.
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch fixes the NULL packet processing problem. Originally,
pipeline's write attempt to NULL packets generated by source
port may crash the application.
This patch fixes the problem by enforcing each source port
defined in cfg file containing a user specified or default pcap
file path.
Fixes: 0e1e7d53 ("examples/ip_pipeline: add pcap file source")
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
When initializing crypto devices within the app,
the provided key sizes are checked against the supported
sizes from the crypto device capabilities.
When the supported sizes are not a range, but a single value,
the check may become an infinite loop (when size is not supported).
Fixes: a061e50a0d97 ("examples/l2fwd-crypto: fix ambiguous input key size")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
This patch enables AES-XCBC-MAC authentication algorithm support to
l2fwd-crypto sample application.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
This patch enables AES counter mode algorithm support to l2fwd-crypto
sample application.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The RTE_ETH_VALID_PORTID_OR_ERR_RET macro is used in some places
to check if a port id is valid or not. This commit makes use of it in
some new parts of the code.
Signed-off-by: Mauricio Vasquez B <mauricio.vasquezbernal@studenti.polito.it>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Some architectures (ex: Power8) have a cache line size of 128 bytes,
so the drivers should not expect that prefetching the second part of
the mbuf with rte_prefetch0(&m->cacheline1) is valid.
This commit add helpers that can be used by drivers to prefetch the
rx or tx part of the mbuf, whatever the cache line size.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The rte_eth_dev_count() function will never return a value greater
than RTE_MAX_ETHPORTS, so that checking is useless.
Signed-off-by: Mauricio Vasquez B <mauricio.vasquezbernal@studenti.polito.it>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
bulk functions expect that all memory is set with zeros
Fixes: 67ebdbef0c31 ("examples/ip_pipeline: add bulk update of firewall rules")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
In the function app_init_eal(struct app params * app) number of
entries into array exceeds the size of the array if the conditions
are fulfilled.
Coverity issue: 124567
Fixes: 7f64b9c004aa ("examples/ip_pipeline: rework config file syntax")
Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Value returned from a function is not checked for errors before being used.
Coverity issue: 13207
Fixes: 07db4a975094 ("examples/distributor: new sample app")
Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Infinite loop: The loop does not have a normal termination condition,
so will continue until an abnormal condition arises.
In rte_netmap_poll: Infinite loop with unsatisfiable exit condition.
Coverity issue: 30701
Fixes: 06371afe ("examples/netmap_compat: import netmap compatibility example")
Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
In expression 1ULL << i, left shifting by more than 63 bits
has undefined behavior. The shift amount, i, is as much as 127.
Coverity issue: 30690
Fixes: de3cfa2c9823 ("sched: initial import")
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
overrun-local: Overrunning array tokens of 8 8-byte elements
at element index 4294967294 (byte offset 34359738352)
using index i (which evaluates to 4294967294).
Coverity issue: 30708
Fixes: de3cfa2c9823 ("sched: initial import")
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
In kni_free_kni: Value returned from a function is not checked for errors
before being used
Coverity issue: 30692
Fixes: b475eb0bc400 ("examples/kni: new parameters")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
In add_vm: The string buffer may not have a null terminator if the source
string's length is equal to the buffer size
Coverity issue: 30691
Fixes: e8ae9b662506 ("examples/vm_power: channel manager and monitor in host")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
switch_worker() is the last piece of code that is messy yet it touches
virtio/vhost device.
Here do a cleanup, so that we will be less painful for later vhost ABI
refactoring.
The cleanup is straight forward: break long lines, move some code into
functions. The last, comment a bit on switch_worker().
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
It has always been a mystery (at least to me before) that how many
mbuf is enough while creating an mbuf pool. While current macro
NUM_MBUFS_PER_PORT gives your some insights, it's not that accurate:
it doesn't consider the case we may receive a big packet, say 64K
when TSO is enabled.
We actually have tried to fix it once before, with commit 5499c1fc9baa
("examples/vhost: fix mbuf allocation"), but it just workarounded it
by enlarging it a bit so that the case described in the commit log
by passes. So, while trying to fix it ultimately, I'm thinking how
big is big enough, and what are the factors need consider to figure
out a proper value.
Therefore, here you are. I introduced a helper function to create
the mbuf pool, and do the "how many mbufs are needed" calculation
there. Also, I put detailed comments how that comes, to serve as
the guidelines.
Fixes: 9fd72e3cbd29 ("examples/vhost: add virtio offload")
Fixes: 5499c1fc9baa ("examples/vhost: fix mbuf allocation")
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Every time I do a VM2VM iperf test with vhost example, I have to set
the arp table manually, as vhost-switch just ignores the broadcast
packet, leaving the ARP request not served.
Here we do a transmit a broadcast packet (such as ARP request) to
every vhost device, as well as the physical port, to fix above
arp table issue.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
rte_ether.h already provides a helper function to do mac address
compare. No need to define our own, use it directly.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Interestingly, DESC_PER_CACHELINE has never been used since the
introduction of vhost example. Remove it.
vlan_ethhdr struct and VLAN_ETH_HLEN macro reference had been removed
by commit 4d50b6acbd95 ("examples/vhost: adapt Tx routing to lib"), but
had forgot to remove the definition.
Fixes: 4d50b6acbd95 ("examples/vhost: adapt Tx routing to lib")
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
It's reported that it's has not been working for a long while. And due
to it's complex, it's better to redesign it than to fix it to make it
work again.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The macro RTE_VERIFY always checks a condition.
It is optimized with "unlikely" hint.
While this macro is well suited for test applications, it is preferred
in libraries and examples to enable such check in debug mode.
That's why the macro RTE_ASSERT is introduced to call RTE_VERIFY only
if built with debug logs enabled.
A lot of assert macros were duplicated and enabled with a specific flag.
Removing these #ifdef allows to test these code branches more easily
and avoid dead code pitfalls.
The ENA_ASSERT is kept (in debug mode only) because it has more
parameters to log.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The debug logs must be enabled at compile-time and run-time.
There are also some internal flags in some examples to enable the debug
logs of the applications. They are now enabled in debug configs and
can be disabled thanks to the more generic logtype mechanism:
rte_set_log_type(RTE_LOGTYPE_USER1, 0);
Removing these #ifdef allows to test these code branches more easily
and avoid dead code pitfalls.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
It seems that with gcc >5.x and -O2/-O3 optimization breaks packet
grouping algorithm in l3fwd-thread application causing segfault.
When last packet pointer "lp" and "pnum->u64" buffer points the same
memory buffer, high optimization can cause unpredictable results.
It seems that assignment of precalculated group sizes may interfere
with initialization of new group size when lp points value inside
current group and didn't should be changed.
With gcc >5.x and optimization we cannot be sure which assignment will be
done first, so the group size can be counted incorrectly causing segfault.
This patch eliminates intersection of assignment of initial group size
(lp[0] = 1) and precalculated group sizes when gptbl[v].idx < 4.
The same patch was applied for original l3fwd (af1694d94).
Fixes: d48415e1fee3 ("examples/performance-thread: add l3fwd-thread app")
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
CID: #30688
The operaton may have an undefined behavior or yield to an unexpected result.
In setup_port_lcore_affinities: A bit shift operation has a shift amount
which is too large or has a negative value.
Fixes: af75078fece3 ("first public release")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
The function rte_hash_lookup_multi() was renamed rte_hash_lookup_bulk()
in DPDK 1.4 and was kept as an undocumented alias.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Some statistics were deprecated since release 2.1 (49f386542af4).
The last deprecated counter to be used was imcasts.
The VF loopback statistics are also removed as they are used only
in igb and duplicated in extended statistics.
The new counters should be added to extended statistics.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Support of PCAP file has been added to rte_port in release 16.04
as NEXT_ABI. It is in the standard ABI of the release 16.07.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
vm_power_manager utilize libvirt API virDomainGetVcpuPinInfo to
retrieve domU vcpu information. This API is implemented from version 0.9.3.
Suse11 SP3 32bit default libvirt version is 0.8.8.
examples/vm_power_manager/channel_manager.c:
channel_manager.c:117:3: error: implicit declaration of function
'virDomainGetVcpuPinInfo'
Check and skip it from examples or raise an error when trying to compile
without libvirt or with a too old libvirt.
Fixes: e8ae9b662 ("examples/vm_power: channel manager and monitor in host")
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Compilation fails on 32 bits on Vhost_xen sample app, due to wrong casting:
examples/vhost_xen/vhost_monitor.c: In function ‘new_device’:
examples/vhost_xen/vhost_monitor.c:288:62: error: cast from pointer to integer
of different size [-Werror=pointer-to-int-cast]
Fixes: 47bd46112b71 ("xen: import xenvirt pmd and vhost_xen")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Performance-thread sample app is only supported for x86_64 targets,
so this commit adds a check to avoid compilation on other targets.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
In icc 14.0, compilation was broken:
examples/ipsec-secgw/sa.c(212): error: a designator for an anonymous
union member can only appear within braces corresponding to that anonymous union
.cipher = { RTE_CRYPTO_CIPHER_OP_ENCRYPT, RTE_CRYPTO_CIPHER_AES_CBC,
^
The member in anonymous union initialization should be inside '{}',
otherwise it will report an error.
Fixes: d299106e8e31 ("examples/ipsec-secgw: add IPsec sample application")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
error log:
ip_pipeline/pipeline/pipeline_routing_be.c:1537:
integer constant is too large for 'long' type
Fixes: 0ae7275810f1 ("examples/ip_pipeline: add more functions to routing pipeline")
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
CID 120150:
Wrong size of the allocated memory. Passing argument as size of pointer
(8UL) instead of size of structure app_pipeline_firewall_rule.
Fixes: 67ebdbef0c31 ("examples/ip_pipeline: add bulk update of firewall rules")
Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com>
In l3fwd-acl and l3fwd-power not all tx ports was included in tx_port_id
array, used to periodically drain only available ports. This caused that
some packets can remain in buffer when application stops to receiving
packets or when size of burst is small.
Fixes: e2366e74e029 ("examples: use buffered Tx")
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
When parsing crypto device type, the string was being copied
with strcpy(), which could overflow the destination buffer
(which is 32 byte long), so snprintf() should be used instead.
This fixes coverity issue 124575:
/examples/l2fwd-crypto/main.c: 1005 in l2fwd_crypto_parse_args_long_options()
>>> CID 124575: (STRING_OVERFLOW)
>>> You might overrun the 32 byte fixed-size string
"options->string_auth_algo" by copying "optarg" without checking the length.
1005 strcpy(options->string_auth_algo, optarg);
Fixes: 49f79e86480d ("examples/l2fwd-crypto: add missing string initialization")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
It seems that with gcc >5.x and -O2/-O3 optimization breaks packet
grouping algorithm.
When last packet pointer "lp" and "pnum->u64" buffer points the same
memory buffer, high optimization can cause unpredictable results.
It seems that assignment of precalculated group sizes may interfere
with initialization of new group size when lp points value inside
current group and didn't should be changed.
With gcc >5.x and optimization we cannot be sure which assignment will
be done first, so the group size can be counted incorrectly.
This patch eliminates intersection of assignment of initial group size
(lp[0] = 1) and precalculated group sizes when gptbl[v].idx < 4.
Fixes: 94c54b4158d5 ("examples/l3fwd: rework exact-match")
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
error: loops in this subroutine are not good vectorization candidates
(try compiling with O3 and/or IPO).
this error occurs in icc 15.0.1
Solution to disable this diagnostic message
https://software.intel.com/en-us/forums/intel-c-compiler/topic/537688
Fixes: d299106e8e31 ("examples/ipsec-secgw: add IPsec sample application")
Fixes: 8cc72f2814dd ("examples/vmdq_dcb: support X710")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Fix for compilation errors for icc:
error #188: enumerated type mixed with another type
Fixes: 00c58901f1b3 ("examples/l2fwd-crypto: use key-value list of supported algorithms")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch fixes the pcap file parsing in ip_pipeline. Originally, the
parser recognizes the pcap related entries regardless of the RTE_PORT_PCAP
macro definition status.
Fixes: fe5d04621303 ("examples/ip_pipeline: add pcap file dump")
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch redesigns the API to set the link speed/s configuration
of an ethernet port. Specifically:
- it allows to define a set of advertised speeds for
auto-negociation.
- it allows to disable link auto-negociation (single fixed speed).
- default: auto-negociate all supported speeds.
A flag autoneg in struct rte_eth_link indicates if link speed was a
result of auto-negociation or was fixed by configuration.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Beilei Xing <beilei.xing@intel.com>
Tested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Define and use ETH_LINK_UP and ETH_LINK_DOWN where appropriate.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
