return error if init is not complete before accessing stats.
Fixes: ed2ced6fe927 ("net/bnxt: check initialization before accessing stats")
Cc: stable@dpdk.org
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We were not considering the case of nested VLANs while
calculating MTU. This patch takes care of the same.
Fixes: daef48efe5e5 ("net/bnxt: support set MTU")
Cc: stable@dpdk.org
Signed-off-by: Qingmin Liu <qingmin.liu@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Jay Ding <jay.ding@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
MTU setting does not take effect after rte_eth_dev_configure
is called with jumbo enable unless it is configured using the
set_mtu dev_op.
Fixes: daef48efe5e5 ("net/bnxt: support set MTU")
Cc: stable@dpdk.org
Signed-off-by: Qingmin Liu <qingmin.liu@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Jay Ding <jay.ding@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Validate pointers aren't pointing to uninitialized areas
including txq and rxq before using them to avoid
bnxt driver from crashing.
Signed-off-by: Rahul Gupta <rahul.gupta@broadcom.com>
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Tested-by: Randy Schacher <stuart.schacher@broadcom.com>
Return EINVAL instead of ENOSPC when invalid queue_idx passed in
during rx and tx queue_setup_op routines.
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Rename driver version from "Broadcom Cumulus driver" to
"Broadcom NetXtreme driver" to reflect this driver is applicable to
NetXtreme family beyond Cumulus.
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
rename check_zero_bytes to bnxt_check_zero_bytes to match proper prefix.
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support to bnxt driver to register RTE_ETH_EVENT_INTR_LSC
event and monitor physical link status.
Signed-off-by: Qingmin Liu <qingmin.liu@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
For some unknown reason, priorities do not have any effect on flow rules
that happen to match UDP destination ports. Those are always matched first
regardless.
This patch is a workaround that enforces this limitation at the PMD level;
such flow rules can only be created at the highest priority level for
correctness.
Fixes: a5171594fc3b ("net/mlx4: expose support for flow rule priorities")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Item spec and last are wrongly compared to the NIC capability causing a
validation failure when the mask is null.
This validation function should only verify the user is not configuring
unsupported matching fields.
Fixes: 2097d0d1e2cc ("net/mlx5: support basic flow items and actions")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
mlx5 prefixed function returns a negative errno value.
the error handler on mlx5_pci_probe is doing the same.
Fixes: a6d83b6a9209 ("net/mlx5: standardize on negative errno values")
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Upon success, mlx5_socket_connect should return the fd descriptor of the
primary process
Fixes: a6d83b6a9209 ("net/mlx5: standardize on negative errno values")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
A new ethdev API was exposed by
commit 3be82f5cc5e3 ("ethdev: support PMD-tuned Tx/Rx parameters")
Enabling the PMD to provide default parameters in case no strict request
from application in order to improve the out of the box experience.
While the current API lacks the means for the PMD to provide the best
possible value, providing the best default the PMD can guess.
The values are based on Mellanox performance report and depends on the
underlying NIC capabilities.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
According to ethtool_link_setting API recommendation ETHTOOL_GLINKSETTINGS
should be called before ETHTOOL_GSET as the later one deprecated.
Fixes: f47ba80080ab ("net/mlx5: remove kernel version check")
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
MULTI_SEGS and JUMBO_FRAME offload capability should be exposed
both VF and PF since i40e does support it.
Fixes: c3ac7c5b0b8a ("net/i40e: convert to new Rx offloads API")
Fixes: 7497d3e2f777 ("net/i40e: convert to new Tx offloads API")
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
If we find a Broadcom 54616, handle as a e1000_phy_none assuming that
the NIC reset has initialized the PHY to a sane state.
Signed-off-by: Chas Williams <chas3@att.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
In scenario of Kernel Driver runs on PF and PMD runs on VF, PMD exit
doesn't disable promiscuous mode, this will cause vlan filter set by
Kernel Driver will not take effect.
This patch will fix it, add promiscuous disable at device disable.
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add ixgbe API to enable SBP bit in FCTRL register
to allow receiving packets that may otherwise be
considered length errors by ixgbe and dropped
Signed-off-by: Shweta Choudaha <shweta.choudaha@att.com>
Reviewed-by: Chas Williams <chas3@att.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
After the commit 2a04139f66b4 ("eal: add single file segments option"),
one hugepage file could contain multiple hugepages which are further
mapped to different memory regions.
Original enumeration implementation cannot handle this situation.
This patch filters out the duplicated files; and adjust the size after
the enumeration.
Fixes: 6a84c37e3975 ("net/virtio-user: add vhost-user adapter layer")
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
rte_eth_vhost_get_vid_from_port_id returns a value of 0 if
called before the first call to the new_device callback.
A vid value >=0 suggests the device is active which is not
the case in this instance. Initialise vid to a negative
value to prevent this.
Fixes: ee584e9710b9 ("vhost: add driver on top of the library")
Cc: stable@dpdk.org
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
A bracket was misplaced in a condition check, this patch
fixes it.
Coverity issue: 277232, 277237
Fixes: 3bb595ecd682 ("vhost/crypto: add request handler")
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
In the loop to copy virtio-net header to the descriptor buffer,
destination pointer was incremented instead of the source
pointer.
Fixes: fb3815cc614d ("vhost: handle virtually non-contiguous buffers in Rx-mrg")
Fixes: 6727f5a739b6 ("vhost: handle virtually non-contiguous buffers in Rx")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
In the loop to copy virtio-net header to the descriptor buffer,
destination pointer was incremented instead of the source
pointer.
Coverity issue: 277240
Fixes: 82c93a567d3b ("examples/vhost: move to safe GPA translation API")
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
when rte_vhost_driver_unregister detstroy the vsocket, we
should set it to NULL after freeing it, because in client mode,
the conn may be added to reconnect thread while vsocket is
destroyed. In one case, if qemu create vhostuser port as a
server with the same unix path, the reconnect thread will
reconnect to it while vsocket is destroyed.
To fix this:
1. set vsocket to NULL after free it.
2. remove the reconnection from reconnection thread in suitable
position.
Cc: stable@dpdk.org
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When qemu close the unix socket fd of the vhostuser as a
server, and then immediately delete the vhostuser port on
openvswitch. There will be a deadlock.
A thread (fdset event thread): B thread:
1. fdset_event_dispatch rte_vhost_driver_unregister
2. set the fd busy to 1. lock vsocket->conn_mutex
3. vhost_user_read_cb fdset_del waits busy changed to 0.
4. vhost peer closed, remove the
conn from vsocket->conn_list:
lock vsocket->conn_mutex
5. set the fd busy to 0
Fixes: 65388b43f592 ("vhost: fix fd leaks for vhost-user server mode")
Cc: stable@dpdk.org
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
In VM2NIC case zero copy may need some tuning to get best performance.
This patch describes the zero copy starved case and provides a tuning
tip.
Signed-off-by: Junjie Chen <junjie.j.chen@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Fix missing DEV_RX_OFFLOAD_CHECKSUM flag in RX offloads.
Remove depricated txq_flags field.
Fixes: a92870896b4a ("net/octeontx: use the new offload APIs")
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
We are still using the txq_flags which is no longer needed with the
new offload API. Cleaning it up.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Since we move to new offload APIs, txq_flags is no long needed.
This patch remove the dependence on that.
Fixes: 30f3ce999e6a ("net/fm10k: convert to new Tx offloads API")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Since we move to new offload APIs, txq_flags is no long needed.
This patch remove the dependence on that.
Fixes: e5c05e6590ea ("net/e1000: convert to new Tx offloads API")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Since we move to new offload APIs, txq_flags is no long needed.
This patch remove the dependence on that.
Fixes: 51215925a32f ("net/ixgbe: convert to new Tx offloads API")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
There is no necessity to fill in TxQ flags since ethdev maps
Tx offloads to TxQ flags on device info get for apps which are
not converted yet to Tx offloads API.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Tx offload will be converted to txq_flags automatically during
rte_eth_dev_info_get and rte_eth_tx_queue_info_get. So PMD can
clean the code to get rid of txq_flags at all while keep old APP
not be impacted.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
In ip_frag_process, some IP_FRAG_LOG content is wrong.
Fixes: 4f1a8f633862 ("ip_frag: add IPv6 reassembly")
Cc: stable@dpdk.org
Signed-off-by: Li Han <han.li1@zte.com.cn>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Patch adding configurable locking has reshuffled some init stages, but
did not put them back in correct order. Fix order of init by moving
everything that was before arguments parsing into correct places.
Fixes: e505d84c64ab ("app/testpmd: make locking memory configurable")
Reported-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
- add EXPERIMENTAL tag for the section in MAINTAINERS.
- add EXPERIMENTAL tag to BPF public API files.
- add attribute __rte_experimental to BPF public API declarations.
Fixes: 94972f35a02e ("bpf: add BPF loading and execution framework")
Fixes: 5dba93ae5f2d ("bpf: add ability to load eBPF program from ELF object file")
Fixes: a93ff62a8938 ("bpf: introduce basic Rx/Tx filters")
Reported-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Fixes the wrong argument in table action miss function.
Fixes: 4c387fcdf777 ("pipeline: add new functions for action handlers")
Cc: stable@dpdk.org
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
In strlcpy function parameters there was no allowance for
null terminator, so ip address was copied without last character.
Fixes: ae943ebe1ed3 ("examples/ipsec-secgw: replace strncpy with strlcpy")
Cc: stable@dpdk.org
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The second parameter "name" in the function rte_eth_dev_detach
has been already redefined as "char *name __rte_unused",
"port_id" is printed instead of "name" in testpmd.
Fixes: b65ecf199324 ("devargs: rename legacy API")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Matan Azrad <matan@mellanox.com>
With this change, DPAA and DPAA2 configuration compiled applications
are interoperable without any impact on the functional behavior.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The function pthread_create() expects void *(*func) (void *)
for function pointer, however, lthread_func_t was defined as
void (*func) (void *), so now gcc 8.1 warns that the cast is
incorrect, causing a compilation failure. This patch changes
the declaration of lthread_func_t from returning a void to
returning a void*, and then changes the sample app in the
relevant places that are affected by the typedef change.
Fixes: 116819b9ed0d ("examples/performance-thread: add lthread subsystem")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch provides fix for icc compilation issue with event
crypto adapter test application.
Currently, number of elements in the session mempool is defined
by max_nb_sessions & this is replaced with a macro.
Fixes: 3c2c535ecfc0 ("test: add event crypto adapter auto-test")
Reported-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
When a removable device is plugged-out, a RMV interrupt is invoked and
the application can catch the event in order to stop the device
management.
The Testpmd wrong behavior in this case is to detach the removed device
using the EAL detach API.
The EAL API does not invalidate the ethdev port and the port keeps
appearing as valid from the ethdev point of view.
Thus, the next operations for the ethtev port X may trigger an invalid
rte_device access. For example, calling "show port info X" may cause
segfault.
Moreover, the removed port is not removed from the Testpmd data-path
structures. Therefore, the invalid device may still be used by the
Testpmd data-path.
Call the Testpmd detach_port() function which uses the ethdev detach
API, and prepare the Testpmd forward ports database for a new
forwarding session without the detached port.
Fixes: 284c908cc588 ("app/testpmd: request device removal interrupt")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
In the RMV device event callback, there is a call for the removed
device stop operation which triggers a link status operation for the
removed device.
It may casue an error from the removed device PMD.
Skip the link status operation in the above described case.
Fixes: 284c908cc588 ("app/testpmd: request device removal interrupt")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
When the user uses the synchronic hot-plug commands, attach\detach, in
order to insert\remove a port from the system, the forward ports list
update is missed in the current implementation.
Thus, an invalid port may be used for data-path in case of detach
because the detached port was not removed from the forward port list.
In addition, a new port is not used for data-path in case of attach, as the
default behavior of Testpmd, because the attached port was not inserted
to the forward port list.
Update the forward port list in the above cases to allow the correct
port usage for data-path in the next packet forwarding start.
Fixes: edab33b1c01d ("app/testpmd: support port hotplug")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
