dpdk-procinfo, as a secondary process, cannot fetch stats for vdev.
This patch enables that by attaching the port from the shared data.
We also fill the eth dev ops, with only some ops works in secondary
process, for example, stats_get().
Note that, we still cannot Rx/Tx packets on the ports which do not
support multi-process.
Reported-by: Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
The callback is not required any more since there is a new callback
to populate objects using provided memory area which provides
the same information.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Move rte_mempool_xmem_size() code to internal helper function
since it is required in two places: deprecated rte_mempool_xmem_size()
and non-deprecated rte_mempool_op_calc_mem_size_default().
Suggested-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The callback was introduced to let generic code to know octeontx
mempool driver requirements to use single physically contiguous
memory chunk to store all objects and align object address to
total object size. Now these requirements are met using a new
callbacks to calculate required memory chunk size and to populate
objects using provided memory chunk.
These capability flags are not used anywhere else.
Restricting capabilities to flags is not generic and likely to
be insufficient to describe mempool driver features. If required
in the future, API which returns structured information may be
added.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The callback allows to customize how objects are stored in the
memory chunk. Default implementation of the callback which simply
puts objects one by one is available.
Suggested-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Size of memory chunk required to populate mempool objects depends
on how objects are stored in the memory. Different mempool drivers
may have different requirements and a new operation allows to
calculate memory size in accordance with driver requirements and
advertise requirements on minimum memory chunk size and alignment
in a generic way.
Bump ABI version since the patch breaks it.
Suggested-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
The virtio crypto device is a virtual cryptography device
as well as a kind of virtual hardware accelerator for
virtual machines. The linux kernel virtio-crypto driver
has been merged, and this patch introduces virtio crypto
PMD to achieve better performance.
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Reviewed-by: Fan Zhang <roy.fan.zhang@intel.com>
Added support for AES CMAC hash algorithm with 128-bit key,
which has been added in the v0.49 of the IPSec Multi-buffer lib.
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The original code replies on the private channel for primary and
secondary communication. Change to use the generic multi-process
channel.
Note with this change, dpdk-pdump will be not compatible with
old version DPDK applications.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.
In order to fix this common mistake in all external applications,
the function rte_eth_dev_count is deprecated, while introducing
the new functions rte_eth_dev_count_avail and rte_eth_dev_count_total.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The initial objective of
commit d9f0d3a1ff ("ring: remove split cacheline build setting")
was to add an empty cache line between the producer and consumer
data (on platform with cache line size = 64B), preventing from
having them on adjacent cache lines.
Following discussion on the mailing list, it appears that this
also imposes an alignment constraint that is not required.
This patch removes the extra alignment constraint and adds the
empty cache lines using padding fields in the structure. The
size of rte_ring structure and the offset of the fields remain
the same on platforms with cache line size = 64B:
rte_ring = 384
rte_ring.name = 0
rte_ring.flags = 32
rte_ring.memzone = 40
rte_ring.size = 48
rte_ring.mask = 52
rte_ring.prod = 128
rte_ring.cons = 256
But it has an impact on platform where cache line size is 128B:
rte_ring = 384 -> 768
rte_ring.name = 0
rte_ring.flags = 32
rte_ring.memzone = 40
rte_ring.size = 48
rte_ring.mask = 52
rte_ring.prod = 128 -> 256
rte_ring.cons = 256 -> 512
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Event devices can be coupled with various components to provide
new event sources by using event adapters. The event timer adapter
is one such adapter; it bridges event devices and timer mechanisms.
This library extends the event-driven programming model by
introducing a new type of event that represents a timer expiration,
and it provides APIs with which adapters can be created or destroyed
and event timers can be armed and canceled.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch adds support for new NIC NFB-200G2QL.
At the probing stage numa nodes for the DMA queues are identified
and the appropriate number of ports is allocated.
DMA queues residing on the same numa node are grouped in the same
port.
Signed-off-by: Matej Vido <vido@cesnet.cz>
Change the prototype and the behavior of dev_ops->eth_mac_addr_set(): a
return code is added to notify the caller (librte_ether) if an error
occurred in the PMD.
The new default MAC address is now copied in dev->data->mac_addrs[0]
only if the operation is successful.
The patch also updates all the PMDs accordingly.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
In a container environment if the vhost-user backend restarts, there's
no way for it to reconnect to virtio-user. To address this, support for
server mode is added. In this mode the socket file is created by virtio-
user, which the backend then connects to. This means that if the backend
restarts, it can reconnect to virtio-user and continue communications.
With current implementation, LSC is enabled at virtio-user side to
support to accept the coming connection.
Server mode virtio-user only supports to work with vhost-user.
Release note is updated in this patch.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
This patch adds public API implementation to vhost crypto.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Jay Zhou <jianjay.zhou@huawei.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The optimal values of several transmission & reception related
parameters, such as burst sizes, descriptor ring sizes, and number
of queues, varies between different network interface devices. This
patch allows individual PMDs to specify preferred parameter values.
Signed-off-by: Remy Horton <remy.horton@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Public struct rte_eth_dev_info has a "struct rte_pci_device" field in it
although it is common for all ethdev in all buses.
Replacing pci specific struct with generic device struct and updating
places that are using pci device in a way to get this information from
generic device.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: David Marchand <david.marchand@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Do ethdev new offloading API switch in two steps.
In v18.05 target is implementing the new ethdev-PMD offload interface,
which means converting all PMDs to new offloading API.
Next target is removing the old ethdev offload API.
It will effect applications and will force them to implement new
offloading API.
Fixes: 3004d34541 ("doc: update deprecation of ethdev offload API")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
In order to handle the uevent which has been detected from the kernel
side, add uevent parse and process function to translate the uevent into
device event, which user has subscribed to monitor.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
This patch aims to add a general device event monitor framework at
EAL device layer, for device hotplug awareness and actions adopted
accordingly. It could also expand for all other types of device event
monitor, but not in this scope at the stage.
To get started, users firstly call below new added APIs to enable/disable
the device event monitor mechanism:
- rte_dev_event_monitor_start
- rte_dev_event_monitor_stop
Then users shell register or unregister callbacks through the new added
APIs. Callbacks can be some device specific, or for all devices.
-rte_dev_event_callback_register
-rte_dev_event_callback_unregister
Use hotplug case for example, when device hotplug insertion or hotplug
removal, we will get notified from kernel, then call user's callbacks
accordingly to handle it, such as detach or attach the device from the
bus, and could benefit further fail-safe or live-migration.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
The rte_ctrlmbuf structure is not used by any example application
in dpdk. Remove it, as announced on the mailing list.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Before, we were aggregating multiple pages into one memseg, so the
number of memsegs was small. Now, each page gets its own memseg,
so the list of memsegs is huge. To accommodate the new memseg list
size and to keep the under-the-hood workings sane, the memseg list
is now not just a single list, but multiple lists. To be precise,
each hugepage size available on the system gets one or more memseg
lists, per socket.
In order to support dynamic memory allocation, we reserve all
memory in advance (unless we're in 32-bit legacy mode, in which
case we do not preallocate memory). As in, we do an anonymous
mmap() of the entire maximum size of memory per hugepage size, per
socket (which is limited to either RTE_MAX_MEMSEG_PER_TYPE pages or
RTE_MAX_MEM_MB_PER_TYPE megabytes worth of memory, whichever is the
smaller one), split over multiple lists (which are limited to
either RTE_MAX_MEMSEG_PER_LIST memsegs or RTE_MAX_MEM_MB_PER_LIST
megabytes per list, whichever is the smaller one). There is also
a global limit of CONFIG_RTE_MAX_MEM_MB megabytes, which is mainly
used for 32-bit targets to limit amounts of preallocated memory,
but can be used to place an upper limit on total amount of VA
memory that can be allocated by DPDK application.
So, for each hugepage size, we get (by default) up to 128G worth
of memory, per socket, split into chunks of up to 32G in size.
The address space is claimed at the start, in eal_common_memory.c.
The actual page allocation code is in eal_memalloc.c (Linux-only),
and largely consists of copied EAL memory init code.
Pages in the list are also indexed by address. That is, in order
to figure out where the page belongs, one can simply look at base
address for a memseg list. Similarly, figuring out IOVA address
of a memzone is a matter of finding the right memseg list, getting
offset and dividing by page size to get the appropriate memseg.
This commit also removes rte_eal_dump_physmem_layout() call,
according to deprecation notice [1], and removes that deprecation
notice as well.
On 32-bit targets due to limited VA space, DPDK will no longer
spread memory to different sockets like before. Instead, it will
(by default) allocate all of the memory on socket where master
lcore is. To override this behavior, --socket-mem must be used.
The rest of the changes are really ripple effects from the memseg
change - heap changes, compile fixes, and rewrites to support
fbarray-backed memseg lists. Due to earlier switch to _walk()
functions, most of the changes are simple fixes, however some
of the _walk() calls were switched to memseg list walk, where
it made sense to do so.
Additionally, we are also switching locks from flock() to fcntl().
Down the line, we will be introducing single-file segments option,
and we cannot use flock() locks to lock parts of the file. Therefore,
we will use fcntl() locks for legacy mem as well, in case someone is
unfortunate enough to accidentally start legacy mem primary process
alongside an already working non-legacy mem-based primary process.
[1] http://dpdk.org/dev/patchwork/patch/34002/
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Tested-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Update the release notes with meter api change to support configuration
profiles.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
During lcore scan, find all socket ID's and store them, and
provide public API to query valid socket id's. This will break
the ABI, so bump ABI version.
Also, remove deprecation notice corresponding to this change.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Move commonly used functions across mempool, event and net devices to a
common folder in drivers.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Change the incorrect driver documentation link to fix
following documentation build warning.
$ make doc-guides-html
sphinx processing guides-html...
doc/guides/rel_notes/release_17_11.rst:58:
WARNING: unknown document: ../nics/mrvl
Fixes: fe93968722 ("net/mrvl: rename PMD as mvpp2")
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Add minimal VF driver. Declare functions common to both PF and VF
functionality in separate header file and import the header file.
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
"struct rte_eth_rxtx_callback" is defined as internal data structure and
used as named opaque type.
So the functions that are adding callbacks can return objects in this
type instead of void pointer.
Also const qualifier added to "struct rte_eth_rxtx_callback *" to
protect it better from application modification.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Add firmware API for updating RSS hash configuration and key. Move
RSS hash configuration from cxgb4_write_rss() to a separate function
cxgbe_write_rss_conf().
Also, rename cxgb4_write_rss() to cxgbe_write_rss() for consistency.
Original work by Surendra Mobiya <surendra@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
In 18.02 release the ABI of ethdev component was changed.
To keep compatibility with previous versions of the library
the versioning of rte_eth_dev_filter_ctrl function was implemented.
As soon as deprecation note was issued in 18.02 release, there is
no need to keep compatibility with previous versions.
Remove the versioning of rte_eth_dev_filter_ctrl function.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds support for meter configuration profiles.
Benefits: simplified configuration procedure, improved performance.
Q1: What is the configuration profile and why does it make sense?
A1: The configuration profile represents the set of configuration
parameters for a given meter object, such as the rates and sizes for
the token buckets. The configuration profile concept makes sense when
many meter objects share the same configuration, which is the typical
usage model: thousands of traffic flows are each individually metered
according to just a few service levels (i.e. profiles).
Q2: How is the configuration profile improving the performance?
A2: The performance improvement is achieved by reducing the memory
footprint of a meter object, which results in better cache utilization
for the typical case when large arrays of meter objects are used. The
internal data structures stored for each meter object contain:
a) Constant fields: Low level translation of the configuration
parameters that does not change post-configuration. This is
really duplicated for all meters that use the same
configuration. This is the configuration profile data that is
moved away from the meter object. Current size (implementation
dependent): srTCM = 32 bytes, trTCM = 32 bytes.
b) Variable fields: Time stamps and running counters that change
during the on-going traffic metering process. Current size
(implementation dependent): srTCM = 24 bytes, trTCM = 32 bytes.
Therefore, by moving the constant fields to a separate profile
data structure shared by all the meters with the same
configuration, the size of the meter object is reduced by ~50%.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Add template release notes for DPDK 18.05 with inline
comments and explanations of the various sections.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Ethdev APIs to add callback return the callback object as "void *",
update return type to actual object type
"struct rte_eth_rxtx_callback *"
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Announce internal PMD API change in the function to set the default MAC
address. The objective is to be able to notify errors occurring in the
PMD.
Link: https://dpdk.org/dev/patchwork/patch/32284/
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This is following the RFC being discussed and targets 18.05
http://dpdk.org/ml/archives/dev/2018-January/085716.html
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@intl.att.com>
Acked-by: Alex Zelezniak <alexz@att.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
