Removing direct access to interrupt handle structure fields,
rather use respective get set APIs for the same.
Making changes to all the drivers access the interrupt handle fields.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>
Fix the mbuf offload flags namespace by adding an RTE_ prefix to the
name. The old flags remain usable, but a deprecation warning is issued
at compilation.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
The flags PKT_TX_VLAN_PKT and PKT_TX_QINQ_PKT are
marked as deprecated since commit 380a7aab1a ("mbuf: rename deprecated
VLAN flags") (2017). But they were not using the RTE_DEPRECATED
macro, because it did not exist at this time. Add it, and replace
usage of these flags.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.
All internal components switched to using new names.
Syntax fixed on lines that this patch touches.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Removing 'DEV_RX_OFFLOAD_JUMBO_FRAME' offload flag.
Instead of drivers announce this capability, application can deduct the
capability by checking reported 'dev_info.max_mtu' or
'dev_info.max_rx_pktlen'.
And instead of application setting this flag explicitly to enable jumbo
frames, this can be deduced by driver by comparing requested 'mtu' to
'RTE_ETHER_MTU'.
Removing this additional configuration for simplification.
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
Move requested MTU value check to the API to prevent the duplicated
code.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Setting MTU bigger than RTE_ETHER_MTU requires the jumbo frame support,
and application should enable the jumbo frame offload support for it.
When jumbo frame offload is not enabled by application, but MTU bigger
than RTE_ETHER_MTU is requested there are two options, either fail or
enable jumbo frame offload implicitly.
Enabling jumbo frame offload implicitly is selected by many drivers
since setting a big MTU value already implies it, and this increases
usability.
This patch moves this logic from drivers to the library, both to reduce
the duplicated code in the drivers and to make behaviour more visible.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
There is a confusion on setting max Rx packet length, this patch aims to
clarify it.
'rte_eth_dev_configure()' API accepts max Rx packet size via
'uint32_t max_rx_pkt_len' field of the config struct 'struct
rte_eth_conf'.
Also 'rte_eth_dev_set_mtu()' API can be used to set the MTU, and result
stored into '(struct rte_eth_dev)->data->mtu'.
These two APIs are related but they work in a disconnected way, they
store the set values in different variables which makes hard to figure
out which one to use, also having two different method for a related
functionality is confusing for the users.
Other issues causing confusion is:
* maximum transmission unit (MTU) is payload of the Ethernet frame. And
'max_rx_pkt_len' is the size of the Ethernet frame. Difference is
Ethernet frame overhead, and this overhead may be different from
device to device based on what device supports, like VLAN and QinQ.
* 'max_rx_pkt_len' is only valid when application requested jumbo frame,
which adds additional confusion and some APIs and PMDs already
discards this documented behavior.
* For the jumbo frame enabled case, 'max_rx_pkt_len' is an mandatory
field, this adds configuration complexity for application.
As solution, both APIs gets MTU as parameter, and both saves the result
in same variable '(struct rte_eth_dev)->data->mtu'. For this
'max_rx_pkt_len' updated as 'mtu', and it is always valid independent
from jumbo frame.
For 'rte_eth_dev_configure()', 'dev->data->dev_conf.rxmode.mtu' is user
request and it should be used only within configure function and result
should be stored to '(struct rte_eth_dev)->data->mtu'. After that point
both application and PMD uses MTU from this variable.
When application doesn't provide an MTU during 'rte_eth_dev_configure()'
default 'RTE_ETHER_MTU' value is used.
Additional clarification done on scattered Rx configuration, in
relation to MTU and Rx buffer size.
MTU is used to configure the device for physical Rx/Tx size limitation,
Rx buffer is where to store Rx packets, many PMDs use mbuf data buffer
size as Rx buffer size.
PMDs compare MTU against Rx buffer size to decide enabling scattered Rx
or not. If scattered Rx is not supported by device, MTU bigger than Rx
buffer size should fail.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Currently, most ethdev callback API use queue ID as parameter, but Rx
and Tx queue release callback use queue object which is used by Rx and
Tx burst data plane callback.
To align with other eth device queue configuration callbacks:
- queue release callbacks are changed to use queue ID
- all drivers are adapted
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Error occurs when configuring meson with --buildtype=minsize
with GCC 11.1.0:
In function ‘__internal_ram_wr_relaxed’,
inlined from ‘internal_ram_wr’ at ecore_int_api.h:166:2,
inlined from ‘qede_update_rx_prod.constprop’ at qede_rxtx.c:736:2:
drivers/net/qede/base/bcm_osal.h:136:9: error:
‘rx_prods’ is used uninitialized [-Werror=uninitialized]
| rte_write32_relaxed((_val), (_reg_addr))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ecore_int_api.h:151:17: note: in expansion of macro ‘DIRECT_REG_WR_RELAXED’
| DIRECT_REG_WR_RELAXED(p_hwfn, &((u32 OSAL_IOMEM *)addr)[i],
| ^~~~~~~~~~~~~~~~~~~~~
drivers/net/qede/qede_rxtx.c: In function ‘qede_update_rx_prod.constprop’:
drivers/net/qede/qede_rxtx.c:724:33: note: ‘rx_prods’ declared here
| struct eth_rx_prod_data rx_prods = { 0 };
| ^~~~~~~~
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Devendra Singh Rawat <dsinghrawat@marvell.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Added macros to simplify print of MAC address.
The six bytes of a MAC address are extracted in
a macro here, to improve code readablity.
Signed-off-by: Aman Deep Singh <aman.deep.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Added macro to print six bytes of MAC address.
The MAC addresses will be printed in upper case
hexadecimal format.
In case there is a specific check for lower case
MAC address, the user may need to make a change in
such test case after this patch.
Signed-off-by: Aman Deep Singh <aman.deep.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Since meson 0.59.0 version, the extract_all_objects() API
need to pass explicit boolean value.
To remove the following warning[1], added explicit `true` for
extract_all_objects() use in codebase whever there is
no argument.
[1]
WARNING: extract_all_objects called without setting recursive
keyword argument. Meson currently defaults to
non-recursive to maintain backward compatibility but
the default will be changed in the future.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Start a new release cycle with empty release notes.
The ABI version becomes 22.0.
The map files are updated to the new ABI major number (22).
The ABI exceptions are dropped and CI ABI checks are disabled because
compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Introduce an internal firmware loading helper to remove code duplication
in our drivers and handle xz compressed firmware by calling libarchive.
This helper tries to look for .xz suffixes so that drivers are not aware
the firmware has been compressed.
libarchive is set as an optional dependency: without libarchive, a
runtime warning is emitted so that users know there is a compressed
firmware.
Windows implementation is left as an empty stub.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Tested-by: Haiyue Wang <haiyue.wang@intel.com>
Let's try to enforce the convention where most drivers use a pmd. logtype
with their class reflected in it, and libraries use a lib. logtype.
Introduce two new macros:
- RTE_LOG_REGISTER_DEFAULT can be used when a single logtype is
used in a component. It is associated to the default name provided
by the build system,
- RTE_LOG_REGISTER_SUFFIX can be used when multiple logtypes are used,
and then the passed name is appended to the default name,
RTE_LOG_REGISTER is left untouched for existing external users
and for components that do not comply with the convention.
There is a new Meson variable log_prefix to adapt the default name
for baseband (pmd.bb.), bus (no pmd.) and mempool (no pmd.) classes.
Note: achieved with below commands + reverted change on net/bonding +
edits on crypto/virtio, compress/mlx5, regex/mlx5
$ git grep -l RTE_LOG_REGISTER drivers/ |
while read file; do
pattern=${file##drivers/};
class=${pattern%%/*};
pattern=${pattern#$class/};
drv=${pattern%%/*};
case "$class" in
baseband) pattern=pmd.bb.$drv;;
bus) pattern=bus.$drv;;
mempool) pattern=mempool.$drv;;
*) pattern=pmd.$class.$drv;;
esac
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
$ git grep -l RTE_LOG_REGISTER lib/ |
while read file; do
pattern=${file##lib/};
pattern=lib.${pattern%%/*};
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
Signed-off-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Fixes a few different things:
* Remove 'fw_version' NULL checks, it is allowed if the 'fw_size' is
zero, 'fw_version' being NULL but 'fw_size' not zero condition checked
in ethdev layer
* Be sure required buffer size is returned if provided one is not big
enough, instead of returning success (0)
* Document in doxygen comment the '-EINVAL' is a valid return type
* Take into account that 'snprintf' can return negative value
* Cast length to 'size_t' to compare it with 'fw_size'
Fixes: bb42aa9ffe ("net/atlantic: configure device start/stop")
Fixes: ff70acdf42 ("net/axgbe: support reading FW version")
Fixes: e2652b0a20 ("net/bnxt: support get FW version")
Fixes: cf0fab1d2c ("net/dpaa: support firmware version get API")
Fixes: 748eccb97c ("net/dpaa2: add support for firmware version get")
Fixes: b883c0644a ("net/e1000: add firmware version get")
Fixes: 293430677e ("net/enic: add handler to return firmware version")
Fixes: 1f5ca0b460 ("net/hns3: support some device operations")
Fixes: bd5b86732b ("net/hns3: modify format for firmware version")
Fixes: ed0dfdd0e9 ("net/i40e: add firmware version get")
Fixes: e31cb9a362 ("net/ice: support FW version getting")
Fixes: 4f09bc55ac ("net/igc: implement device base operations")
Fixes: eec10fb0ce ("net/ionic: support FW version")
Fixes: 8b0b565742 ("net/ixgbe: add firmware version get")
Fixes: 4d9f5b8adc ("net/octeontx2: add FW version get operation")
Fixes: f97b56f9f1 ("net/qede: support FW version query")
Fixes: 83fef46a22 ("net/sfc: add callback to retrieve FW version")
Fixes: bc84ac0fad ("net/txgbe: support getting FW version")
Fixes: 2191347120 ("ethdev: add firmware version get")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Acked-by: Jiawen Wu <jiawenwu@trustnetic.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The member page_offset is always zero. Having this in the qede_rx_entry
makes it larger than it needs to be and this has cache performance
implications so remove that field. In addition, since qede_rx_entry only
has an rte_mbuf*, remove the definition of qede_rx_entry.
Signed-off-by: Balazs Nemeth <bnemeth@redhat.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
While handling the current mbuf, pull the next mbuf into the cache. Note
that the last four mbufs pulled into the cache are not handled, but that
doesn't matter.
Signed-off-by: Balazs Nemeth <bnemeth@redhat.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Ensure that, while ecore_chain_get_cons_idx is running, txq->hw_cons_ptr
is prefetched. This shows a slight performance improvement.
Signed-off-by: Balazs Nemeth <bnemeth@redhat.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
rte_pktmbuf_free_bulk calls rte_mempool_put_bulk with the number of
pending packets to return to the mempool. In contrast, rte_pktmbuf_free
calls rte_mempool_put that calls rte_mempool_put_bulk with one object.
An important performance related downside of adding one packet at a time
to the mempool is that on each call, the per-core cache pointer needs to
be read from tls while a single rte_mempool_put_bulk only reads from the
tls once.
Signed-off-by: Balazs Nemeth <bnemeth@redhat.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
The ring txq->sw_tx_ring is managed with txq->sw_tx_cons. As long as
txq->sw_tx_cons is correct, there is no need to check if
txq->sw_tx_ring[idx] is null explicitly.
Signed-off-by: Balazs Nemeth <bnemeth@redhat.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Calling ecore_chain_get_cons_idx repeatedly is slower than calling it
once and using the result for the remainder of qede_process_tx_compl.
Signed-off-by: Balazs Nemeth <bnemeth@redhat.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Each sw_tx_ring entry was of type struct qede_tx_entry:
struct qede_tx_entry {
struct rte_mbuf *mbuf;
uint8_t flags;
};
Leaving the unused flags member here has a few performance implications.
First, each qede_tx_entry takes up more memory which has caching
implications as less entries fit in a cache line while multiple entries
are frequently handled in batches. Second, an array of qede_tx_entry
entries is incompatible with existing APIs that expect an array of
rte_mbuf pointers. Consequently, an extra array need to be allocated
before calling such APIs and each entry needs to be copied over.
This patch omits the flags field and replaces the qede_tx_entry entry
by a simple rte_mbuf pointer.
Signed-off-by: Balazs Nemeth <bnemeth@redhat.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Since rte_flow is the only API for filtering operations,
the legacy driver interface filter_ctrl was too much complicated
for the simple task of getting the struct rte_flow_ops.
The filter type RTE_ETH_FILTER_GENERIC and
the filter operarion RTE_ETH_FILTER_GET are removed.
The new driver callback flow_ops_get replaces filter_ctrl.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Some dpdk applications blindly pass fixed side RSS hash tables,
and do not check driver/device capabilities.
Moreover, many other drivers do not do such a strong check as well.
Fix it by making qede accept any size rss_key. For larger key
tables we just crop it with notice trace message.
Cc: stable@dpdk.org
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
On some hardware units it was found this trace is flooding the output,
making any dpdk interactive usage kind of problematic.
It is only informational, without any consequences handling, so reducing
it to verbose from explicit notice level.
Cc: stable@dpdk.org
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Acked-by: Devendra Singh Rawat <dsinghrawat@marvell.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Rename PKT_RX_EIP_CKSUM_BAD to PKT_RX_OUTER_IP_CKSUM_BAD and
deprecate the original name. The new name is better aligned
with existing PKT_RX_OUTER_* flags, which should help reduce
confusion about its use.
Suggested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The rte_ethdev_driver.h, rte_ethdev_vdev.h and rte_ethdev_pci.h files are
for drivers only and should be a private to DPDK and not installed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Steven Webster <steven.webster@windriver.com>
The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition,
but the Ether overhead is larger than 18 when it supports dual VLAN tags.
That will cause the jumbo flag rx offload is wrong when MTU size is
'RTE_ETHER_MTU'.
This fix will change the boundary condition with 'RTE_ETHER_MTU' and
overhead, that perhaps impacts the cases of the jumbo frame related.
Fixes: 200645ac79 ("net/qede: set MTU")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When calling rte_eth_promiscuous_enable(port_id) followed by
rte_eth_allmulticast_enable(port_id), the port is not in promisc mode
anymore. This patch ensures that promisc mode takes precedence over
allmulticast mode fixing the regression introduced by b10231aed1.
Fixes: b10231aed1 ("net/qede: fix multicast drop in promiscuous mode")
Cc: stable@dpdk.org
Signed-off-by: Balazs Nemeth <bnemeth@redhat.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Allows i40e and mlx5 PMDs to compile on Windows and disable other drivers.
Disable few i40e warnings with Clang such as comparison of integers of
different signs and macro redefinitions.
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Tal Shnaiderman <talshn@nvidia.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The legacy filter API, including rte_eth_dev_filter_supported() and
rte_eth_dev_filter_ctrl() is removed. Flow API should be used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of FDIR filters RTE flow API should be used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of L2 tunnel filter RTE flow API should be used.
Preserve RTE_ETH_FILTER_L2_TUNNEL since it is used in drivers
internally in RTE flow API support.
rte_eth_l2_tunnel_conf structure is used in other ethdev API
functions.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of HASH filter RTE flow API should be used.
Preserve RTE_ETH_FILTER_HASH since it is used in drivers
internally in RTE flow API support.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of TUNNEL filter RTE flow API should be used.
Move corresponding defines and helper structure to ethdev
driver interface since it is still used by drivers internally.
Preserve RTE_ETH_FILTER_TUNNEL because of usage in drivers.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of N-tuple filter RTE flow API should be used.
Preserve struct rte_eth_ntuple_filter in ethdev API since
the structure and related defines are used in flow classify
library and a number of drivers.
Preserve RTE_ETH_FILTER_NTUPLE because of usage in drivers.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of SYN filter RTE flow API should be used.
Move corresponding definitions to ethdev internal driver API
since it is used by drivers internally.
Preserve RTE_ETH_FILTER_SYN because of it as well.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of FLEXIBLE filter RTE flow API should be used.
Temporarily preserve helper defines in public interface.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of EtherType filter RTE flow API should be used.
Move corresponding definitions to ethdev internal driver API
since it is used by drivers internally.
Preserve RTE_ETH_FILTER_ETHERTYPE because of it as well.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of MACVLAN filter RTE flow API should be used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Replace master lcore with main lcore and
replace slave lcore with worker lcore.
Keep the old functions and macros but mark them as deprecated
for this release.
The "--master-lcore" command line option is also deprecated
and any usage will print a warning and use "--main-lcore"
as replacement.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Since each version map file is contained in the subdirectory of the library
it refers to, there is no need to include the library name in the filename.
This makes things simpler in case of library renaming.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Queue stats are stored in 'struct rte_eth_stats' as array and array size
is defined by 'RTE_ETHDEV_QUEUE_STAT_CNTRS' compile time flag.
As a result of technical board discussion, decided to remove the queue
statistics from 'struct rte_eth_stats' in the long term.
Instead PMDs should represent the queue statistics via xstats, this
gives more flexibility on the number of the queues supported.
Currently queue stats in the xstats are filled by ethdev layer, using
some basic stats, when queue stats removed from basic stats the
responsibility to fill the relevant xstats will be pushed to the PMDs.
During the switch period, temporary 'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS'
device flag is created. Initially all PMDs using xstats set this flag.
The PMDs implemented queue stats in the xstats should clear the flag.
When all PMDs switch to the xstats for the queue stats, queue stats
related fields from 'struct rte_eth_stats' will be removed, as well as
'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS' flag.
Later 'RTE_ETHDEV_QUEUE_STAT_CNTRS' compile time flag also can be
removed.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Change eth_dev_stop_t return value from void to int.
Make eth_dev_stop_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The function rte_eth_dev_release_port() is partially resetting
the struct rte_eth_dev. The drivers were completing this reset
with more pointers set to NULL in the close or remove operations.
More pointers are reset at ethdev level,
and some redundant assignments are removed from PMDs.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When closing a port, it is supposed to be already stopped,
and marked as such with "dev_started" state zeroed by the stop API.
Resetting "dev_started" before calling the driver close operation
was hiding the case of not properly stopped port being closed.
The flag "dev_started" is not changed anymore in "rte_eth_dev_close()".
In case the "dev_stop" function is called from "dev_close",
bypassing "rte_eth_dev_stop()" API,
the "dev_started" state must be explicitly reset in the PMD
in order to keep the same behaviour.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
