This patch includes changes for DCBX like:
- Return empty parameters for oper-params query when negotiation is not
complete
- Use the ieee specific mask value for reading the ethtype value in the
ieee dcbx mode
- Endian-ness conversion is not needed for priority<->TC field, as the
data is already being read/written by ecore in the bigendian way
- While writing the ets config, base driver incorrectly merges the input
values with the operational values. The values should be either set
or unset
- CEE selection field must be set regardless CEE/IEEE mode
- Fail the dcbx query for VF interfaces
- Semantic changes
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add support for 8.14.x.x firmware.
The new firmware adds support for external PHY BCM8485x; configures
fixed link speed with transceiver/cable not supporting negotiation;
supports engine swap; supports overriding PCIe preset equalization
value; checks pause too long for ports and reads die temperature
every second for shutdown threshold.
It includes change in FLR flow when there is a SW initiated FLR.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add PCI IDs for new asic type (defined as CHIP_NUM_AH_xxx).
It supports 50G, 40G, 25G and 10G speeds.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
As part of device probe, check if management FW crash dump logs are
available. If available, then log an warning message and update the
epoch value too. A new struct ecore_mdump_info is added to populate
dump info including the new "reason" field by reading shared memory
region.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add new option called external PBL (page base list) to ecore_chain_alloc
for future use. Mark chain as external if external PBL is provided.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add macros PTR_LO and PTR_HI (for converting pointer to HI and LOW bits for
passing to FW hsi handles).
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
In order to improve Tx switching performance an additional HSI parameter
called same-as-last-id is introduced. This resource allows FW caching the
txqs packet properties. Driver needs to set same-as-last-id to be equal to
the qzone.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Receive indication that VFs are malicious and pass it to the
caller/clients and stop serving those VF's additional resource requests.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add a request for PF Function Level Reset (FLR) before a load request
Fix the location of the PF FLR initiation to be after ecore_get_hw_info()
(which invokes ecore_hw_info_port_num())
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Apparently VF over Legacy PF doesn't work, as VF would fail after
getting the initial rejection message [instead of sending an additional
one where it asks for a FW override and see if it works].
Fixes: 22d07d939c3c ("net/qede/base: update")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add a check and fail the VF's probe request if VF is already in
VF_ACQUIRED state.
Fixes: 22d07d939c3c ("net/qede/base: update")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Rx queue access is still done prior to the index being validated by PF.
Hence move Rx queue and status block validation check before accessing
Rx queue to prevent malicious VFs from using out-of-bound queue indices.
Fixes: 98bc693e1938 ("net/qede/base: change queue start")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Fix to return error code ECORE_INVAL instead of 0 when EQ elements
is too large as done elsewhere in this function.
Fixes: 22d07d939c3c ("net/qede/base: update")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
There are certain conditions under which VF would infinitely send
ACQUIRE messages, as it will fail to understand that PF has rejected
the ACQUIRE request. Fix to reject multiple acquisition requests by VF.
Fixes: 22d07d939c3c ("net/qede/base: update")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Remove unmeaningful function ID value in print.
Don't print the number of Multicast filters as part of Acquire response,
as this is an obsolete field which isn't enforced by PF.
Fixes: 86a2265e59d7 ("qede: add SRIOV support")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
The vendor_id and device_id are used to determine device type. If you
don't have them, then check for determining device type fails and is
always set to default device type.
Fixes: ec94dbc57362 ("qede: add base driver")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
HW can support up to 128 queues based on the NIC config/personality.
But most of the testing is done with 32 queues for PF and 16 for VF
device across different qede devices, so change here is to advertise
only those many instead of returning max queues supported by HW.
Fixes: 2ea6f76aff40 ("qede: add core driver")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
qede PMD does not support SR-IOV PF driver functionality, so
max_vfs is set to 0 to imply the same.
Fixes: 2ea6f76aff40 ("qede: add core driver")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
This patch includes the following:
- Fix missing hash_key_size advertisement
- Fix RSS hash query function
- Update RSS offload flag
- Accept user provided RSS configuration params via rx_adv_conf
in dev_configure()
- Decouple RSS configuration from common qed_update_vport() and
instead make use of existing RSS APIs for default RSS configuration
Fixes: 6d9e26c42c0d ("net/qede: get RSS hash configuration")
Fixes: 9c5d0a669f9b ("net/qede: fix RSS")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
In qede_mac_addr_add() a check is added to differentiate between
unicast/multicast mac to prevent a multicast mac from being wrongly added
to unicast filter table. Secondly, two separate lists will be used to keep
track of unicast/multicast mac filters to prevent duplicate filter
programming. The other change is to remove filter_config from struct
qed_eth_ops_pass and invoke the base APIs directly. This avoids the need
to have multiple structs and function calls.
Fixes: 2ea6f76aff40 ("qede: add core driver")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Current code does not close 'fd' on function exit, leaking resources.
Fixes: 2ea6f76aff40 ("qede: add core driver")
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: Harish Patil <harish.patil@qlogic.com>
Since commit b1fb53a39d88 ("ethdev: remove some PCI specific handling"),
rte_eth_dev_info_get() relies on dev->data->drv_name to report the driver
name to caller.
Having the pmds set driver_info->driver_name in the pmds is useless,
since ethdev overwrites it right after.
The only thing the pmd must do is:
- for pci drivers, call rte_eth_copy_pci_info() which then sets
data->drv_name
- for vdev drivers, manually set data->drv_name
At this stage, virtio-user does not properly report a driver name (fixed in
next commit).
Signed-off-by: David Marchand <david.marchand@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Jan Blunck <jblunck@infradead.org>
The function rte_eth_xstats_get() return an array of tuples (id,
value). The value is the statistic counter, while the id references a
name in the array returned by rte_eth_xstats_get_name().
Today, each 'id' returned by rte_eth_xstats_get() is equal to the index
in the returned array, making this value useless. It also prevents a
driver from having different indexes for names and value, like in the
example below:
rte_eth_xstats_get_name() returns:
0: "rx0_stat"
1: "rx1_stat"
2: ...
7: "rx7_stat"
8: "tx0_stat"
9: "tx1_stat"
...
15: "tx7_stat"
rte_eth_xstats_get() returns:
0: id=0, val=<stat> ("rx0_stat")
1: id=1, val=<stat> ("rx1_stat")
2: id=8, val=<stat> ("tx0_stat")
3: id=9, val=<stat> ("tx1_stat")
This patch fixes the drivers to set the 'id' in their ethdev->xstats_get()
(except e1000 which was already doing it), and fixes ethdev by not setting
the 'id' field to the index of the table for pmd-specific stats: instead,
they should just be shifted by the max number of generic statistics.
Fixes: bd6aa172cf35 ("ethdev: fetch extended statistics with integer ids")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This makes struct rte_eth_dev independent of struct rte_pci_device by
replacing it with a pointer to the generic struct rte_device.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Only the drivers itself can decide if it could fill PCI information fields
of dev_info.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Add a new macro RTE_PMD_REGISTER_KMOD_DEP() that allows a driver to
declare the list of kernel modules required to run properly.
Today, most PCI drivers require uio/vfio.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
- Fix to use bitmapped values in NVM configuration for speed capability
advertisement. This issue is specific to 25G NIC since it is capable
of 25G and 10G speeds.
- Update feature list.
Fixes: 64c239b7f8b7 ("net/qede: fix advertising link speed capability")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Using GCC_VERSION to check gcc version and decide whether to include
that compiler option.
Fixes: ecc7a5a27ffe ("net/qede/base: fix 32-bit build")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Fix to advertise device's link speed capability based on NVM
port configuration instead of returning driver supported speeds.
Fixes: 95e67b479506 ("net/qede: add 100G link speed capability")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
