Add a new req notifier in eal interrupt for enable vfio hotplug.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
This patch use testpmd for example, to show how an app smoothly handle
failure when device be hot-unplug. Except that app should enabled the
device event monitor and register the hotplug event’s callback, it also
need enable hotplug handle mechanism before running. Once app detect the
removal event, the hot-unplug callback would be called. It will first stop
the packet forwarding, then stop the port, close the port, and finally
detach the port to clean the device and release the resources.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The mechanism can initially register the sigbus handler after the device
event monitor is enabled. When a sigbus event is captured, it will check
the failure address and accordingly handle the memory failure of the
corresponding device by invoke the hot-unplug handler. It could prevent
the application from crashing when a device is hot-unplugged.
By this patch, users could call below new added APIs to enable/disable
the device hotplug handle mechanism. Note that it just implement the
hot-unplug handler in these functions, the other handler of hotplug, such
as handler for hotplug binding, could be add in the future if need:
- rte_dev_hotplug_handle_enable
- rte_dev_hotplug_handle_disable
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch aims to add a helper to iterate over all buses to find the
relevant bus to handle the sigbus error.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch implements the ops for the PCI bus sigbus handler. It finds the
PCI device that is being hot-unplugged and calls the relevant ops of the
hot-unplug handler to handle the hot-unplug failure of the device.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
When a device is hot-unplugged, a sigbus error will occur of the datapath
can still read/write to the device. A handler is required here to capture
the sigbus signal and handle it appropriately.
This patch introduces a bus ops to handle sigbus errors. Each bus can
implement its own case-dependent logic to handle the sigbus errors.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch implements the ops to handle hot-unplug on the PCI bus.
For UIO PCI, it could avoids BARs read/write errors by creating a
new dummy memory to remap the memory where the failure is. For VFIO
or other kernel driver, it could specific implement function to handle
hot-unplug case by case.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
A hot-unplug failure and app crash can be caused, when a device is
hot-unplugged but the application still try to access the device
by reading or writing from the BARs, which is already invalid but
still not timely be unmap or released.
This patch introduces bus ops to handle hot-unplug failures. Each
bus can implement its own case-dependent logic to handle the failures.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch introduces a new table action for packet decapsulation
which removes n bytes from the start of the input packet. The n
is read from the current table entry. The following mbuf fields
are updated by the action: data_off, data_len, pkt_len.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch introduces the packet tag table action which attaches
a 32-bit value (the tag) to the current input packet. The tag is
read from the current table entry. The tag is written into the
mbuf->hash.fdir.hi and the flags PKT_RX_FDIR and PKT_RX_FDIR_ID
are set into mbuf->ol_flags.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add rte flow flush api for flushing
all the flows of the port.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch updates the cli parsing of ip_pipeline application
with extra symmetric crypto, port, session, and action support.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch adds symmetric crypto action support to ip_pipeline
application.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch adds symmetric crypto port configuration to ip_pipeline
sample application.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch adds the symmetric crypto action support to pipeline
library. The symmetric crypto action works as the shim layer
between pipeline and DPDK cryptodev and is able to interact with
cryptodev with the control path requests such as session
creation/deletion and data path work to assemble the crypto
operations for received packets.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch adds the symmetric crypto support to port library.
The crypto port acts as a shim layer to DPDK cryptodev library and
supports in-place crypto workload processing.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Added support for parsing raw flow item.
flow_item_raw_preprocess() is added for the same.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
pmd_flow_destroy() API is added to destroy the
created flow.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
pmd_flow_create API is added to support
rte flow create.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Added validation and mapping of flow rule action
with table action profile.
Added flow_rule_action_get() to do the same.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Support for validating and mapping flow rule with HASH
table match is added.
As part of this, below helper functions are added.
flow_rule_match_hash_get()
hash_key_mask_is_same()
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Support for validating and mapping rte flow rule with
ACL table match is added.
As part of this support below utility functions
been added
flow_rule_match_get()
flow_rule_match_acl_get()
flow_item_skip_disabled_protos()
flow_item_proto_preprocess()
flow_item_is_proto()
flow_item_raw_preprocess()
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Start adding flow api operations.
Started with flow validate api support by adding
below basic infrastructure.
flow_pipeline_table_get()
pmd_flow_validate()
Additional flow validate changes will be
added in next patches.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Add utility function to get the rte_eth_dev from
a given softnic.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Added utility function to freeup the
pipeline tables.
Added utility functions to find the pipeline
output port.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Change dev_name, action_profile_name and key_mask
from char* type to arary type of structures
softnic_port_in_params, softnic_port_out_params
and softnic_table_hash_params.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Added new cli by which user can specify to softnic
which rte flow group and direction has to mapped to
which pipeline and table.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Added mapping support from rte_flow attributes
to softnic pipeline and table.
So added flow attribute map set and get functions
definition to new file rte_eth_sofnic_flow.c.
Added pmd flow internals with ingress and egress
flow attribute maps.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
