This patch separates Tx function declarations to different header file
in preparation for removing their implementation from the source file
and as an optional preparation for Tx cleanup.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The mlx5_rxtx.c file contains a lot of Tx burst functions, each of those
is performance-optimized for the specific set of requested offloads.
These ones are generated on the basis of the template function and it
takes significant time to compile, just due to a large number of giant
functions generated in the same file and this compilation is not being
done in parallel with using multithreading.
Therefore we can split the mlx5_rxtx.c file into several separate files
to allow different functions to be compiled simultaneously.
In this patch, we separate Rx function declarations to different header
file in preparation for removing them from the source file and as an
optional preparation step for further consolidation of Rx burst
functions.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
In Windows DevX returns the rate of the current link speed
in bit/s, this rate was converted to Mibit/s instead of the Mbit/s
rate expected by DPDK resulting in wrong link speed reporting.
Fixes: 6fbd73709e ("net/mlx5: support link update on Windows")
Cc: stable@dpdk.org
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Rename the key opaque pointer from rte_tls_key to
rte_thread_key to avoid confusion with transport layer security.
Also rename and remove the "_tls" term from the following
functions to avoid redundancy:
rte_thread_tls_key_create
rte_thread_tls_key_delete
rte_thread_tls_value_set
rte_thread_tls_value_get
Suggested-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Suggested-by: Morten Brørup <mb@smartsharesystems.com>
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
This patch adds support for the timestamp format settings for
the receive and send queues. If the firmware version x.30.1000
or above is installed and the NIC timestamps are configured
with the real-time format, the default zero values for newly
added fields cause the queue creation to fail.
The patch queries the timestamp formats supported by the hardware
and sets the configuration values in queue context accordingly.
Fixes: 86fc67fc93 ("net/mlx5: create advanced RxQ object via DevX")
Fixes: ae18a1ae96 ("net/mlx5: support Tx hairpin queues")
Fixes: 15c3807e86 ("common/mlx5: support DevX QP operations")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
The macro DRV_LOG already includes a terminating line feed character
defined in PMD_DRV_LOG_.
The extra line feeds added in some messages are removed.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Matan Azrad <matan@nvidia.com>
The rte_ethdev_driver.h, rte_ethdev_vdev.h and rte_ethdev_pci.h files are
for drivers only and should be a private to DPDK and not installed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Steven Webster <steven.webster@windriver.com>
The data-path code doesn't take care on 'rxq_cqe_pad_en' and use padded
CQE for any case when the system cache-line size is 128B.
This makes the argument redundant.
Remove it.
Fixes: bc91e8db12 ("net/mlx5: add 128B padding of Rx completion entry")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
multi-threaded flows feature uses pthread function pthread_key_create
but for Windows the destruction option in the function is unimplemented.
To resolve it, Windows will implement destruction mechanism to cleanup
mlx5_flow_workspace object for each terminated thread.
Linux flow will keep the current behavior.
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Khoa To <khot@microsoft.com>
Wrap glue calls dr_create_flow_action_sampler() and
dr_create_flow_action_dest_array() as OS-specific functions.
This is a follow up on
commit b293fbf967 ("net/mlx5: add OS specific flow actions operations")
On Windows, the sampling actions wrappers currently return ENOTSUP.
Using configuration definitions HAVE_MLX5_DR_CREATE_ACTION_FLOW_SAMPLE and
HAVE_MLX5_DR_CREATE_ACTION_DEST_ARRAY the missing sampling DV structs
are added as stubs to windows/mlx5_glue.h file.
Signed-off-by: Ophir Munk <ophirmu@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The clang compiler warns on size mismatches of several
comparisons.
warning: comparison of integers of different signs
To resolve those the right types is used/cast to.
Fixes: 3e8edd0ef8 ("net/mlx5: update metadata register ID query")
Fixes: e554b672aa ("net/mlx5: support flow tag")
Fixes: c8f0abe7f8 ("net/mlx5: fix meter color register consideration")
Cc: stable@dpdk.org
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
use OS functions for flow_dv_sync_domain to compile
Windows.
mlx5_os_flow_dr_sync_domain is unsupported for Windows.
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Windows Devx interface name is the same as device name with
different size then IF_NAMESIZE. To support it MLX5_NAMESIZE
is defined with IF_NAMESIZE value for Linux and MLX5_FS_NAME_MAX
value for Windows.
Fixes: e9c0b96e35 ("net/mlx5: move Linux ifname function")
Cc: stable@dpdk.org
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
There are three types of eth_dev_ops: primary, secondary and isolate
represented in three callback tables per OS. In this commit the OS
specific eth dev tables are unified into shared tables in file mlx5.c.
Starting from this commit all operating systems must implement the same
eth dev APIs. In case an OS does not support an API - it can return in
its implementation an error ENOTSUP.
Fixes: 042f5c94fd ("net/mlx5: refactor device operations for Linux")
Cc: stable@dpdk.org
Signed-off-by: Ophir Munk <ophirmu@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
This commit implements mlx5_flow_os_create_flow() API. It is equivalent
to Linux rdma-core implementation. The API receives the matcher mask,
matcher value and an array of actions. They are copied into a PRM-like
struct devx_fs_rule_add_in. Then glue API devx_fs_rule_add() is called.
Signed-off-by: Ophir Munk <ophirmu@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
This commit implements mlx5_flow_os_create_flow_action_dest_devx_tir()
API as the Linux rdma-core equivalent. Missing rdma-core parameters are
added to file mlx5_win_defs.h. The action TIR id and type
(MLX5_FLOW_CONTEXT_DEST_TYPE_TIR) are saved in the action struct. The
action struct will be added to array of actions and will be used later
by the flow creation API.
Signed-off-by: Ophir Munk <ophirmu@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
This commit implements the mlx5_flow_os_create_flow_matcher() API. It is
the Linux rdma-core equivalent implementation. Missing rdma-core
parameters (e.g. struct mlx5dv_flow_match_parameters) are added to file
mlx5_win_defs.h. The API allocates space to hold the PRM bits in PRM
fte_match_param format and copy the DV translated PRM bits into the
matcher struct. This matcher struct will be used later by the flow
creation API.
Signed-off-by: Ophir Munk <ophirmu@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
This patch adds the initial flow framework under Windows OS. It supports
a subset of filters (ETH, IPV4, UDP) and a QUEUE action. It is based on
DevX mechanism to send commands to the NIC through the kernel. It does
not support steering rules (i.e. writing directly to the NIC memory).
The Windows framework uses the existing DV framework where file
mlx5_flow_dv.c remains intact.
Steps involved in flow creation:
1. Create a domain (RX, TX, FDB). Since domains are created by steering
rules and not with DevX, Windows does not require a domain object (this
means switch dev mode which requires an FDB domain is not supported).
2. Create a table object. Windows only supports table 0. The call to
mlx5_flow_os_create_flow_tbl() silently returns successfully.
3. Create a matcher object. A matcher struct is created by calling
mlx5_flow_os_create_flow_matcher(). The matcher validation and
translation are part of the DV implementation. The matcher bits that
were created by DV in standard PRM format are copied into the matcher
struct.
4. Create an action object. The call to
mlx5_flow_os_create_flow_action_dest_devx_tir() creates an action struct
with the TIR type and id. This struct will be a parameter later in a
call to flow creation. All other action calls (e.g. packet reformat,
header modification, jump to flow table, etc) return with a non
supported error.
5. Create the flow. The call to mlx5_flow_os_create_flow() receives the
matcher struct, action struct, and copy them into Windows specific
fs_rule struct, then it calls glue API devx_fs_rule_add().
Details on additional APIs:
* mlx5_flow_os_get_type() is called during flow type selection. In
Windows it constantly returns MLX5_FLOW_TYPE_DV.
* mlx5_flow_os_item_supported() is called before starting DV items
validation or translation. It filters out the OS non supported items in
advance.
* mlx5_flow_os_action_supported() is called before starting DV actions
validation or translation. It filters out the OS non supported actions
in advance.
* mlx5_flow_adjust_priority() is an OS stub for flow priority
adjustment. Windows only supports flow priority 0.
Signed-off-by: Ophir Munk <ophirmu@nvidia.com>
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Support VF BDF scanning by checking both the BDF and raw BDF provided by
DevX. In Linux a PCI address is formatted as: domain, bus, device,
function (DBDF). This is right for both a PF and a VF. In Windows a PF
also has a DBDF format, but the domain is always 0, while a VF has a
special "domain" called "Virtual PCI Bus, Serial" (for example: "Virtual
PCI Bus Slot 2 Serial 2") or segment. The full VF format under Windows
is called raw DBF. Windows special domain must be considered and DevX
must be called to support it.
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
This commit implements mlx5_dev_spawn() API which allocates an eth
device (struct rte_eth_dev) for each PCI device. When working with
representors virtual functions (as in Linux), one PCI device may spawn
several eth devices: the master device for the main physical function
(PF) and several representors for the virtual functions (VFs). However,
currently Windows does not work in switch dev mode, therefore, no VFs
are created and no representors are spawned. In this case one eth device
is created per one PCI main port. In addition to device creation - the
device configuration must be correctly set. The device arguments
(devargs - set by the user) are parsed but they may be overridden by
Windows limitations or hardware configurations. Some associated network
parameters are stored in eth device (e.g. ifindex, MAC address, MTU) and
some callback (e.g. burst functions) are set.
Signed-off-by: Ophir Munk <ophirmu@nvidia.com>
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
This commit implements mlx5_os_pci_probe API under Windows. It does all
required initializations then it gets the PCI device list using glue API
get_device_list(). Next, all non MLX5 matched devices are filtered out.
The supported NIC types are: CONNECTX4VF, CONNECTX4LXVF, CONNECTX5VF,
CONNECTX5EXVF, CONNECTX5BFVF, CONNECTX6VF, MELLANOX_CONNECTX6DXVF. Each
device in the list is assigned with default configuration parameters,
most of them are 0. The default dv_flow_en parameter value is 1 (which
means Windows match and action flows are based on DV code). Next for
each PCI device call mlx5_dev_spawn() to create an eth device (struct
rte_ethdev). The implementation of device spawn is in the follow up
commit. Finally, the device list is free.
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Signed-off-by: Ophir Munk <ophirmu@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
This commit implements mlx5_os_open_device() API. It calls glue API
open_device() then glue API query_device() to fill in 'struct
mlx5_context' with data for later usage.
Signed-off-by: Ophir Munk <ophirmu@nvidia.com>
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
This commit adds stubs to VLAN VM operations. It is the Windows
equivalent implementation of [1]. The Linux implementation was based on
Netlink APIs which are not supported in Windows.
[1]
commit 7af10d29a4 ("net/mlx5/linux: refactor VLAN")
Signed-off-by: Ophir Munk <ophirmu@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
This commit implements mlx5_is_removed() API. A new glue call
'init_shutdown_event' is added to support the new API.
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
This commit copies the interface name as saved in the device context
since its creation.
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
This commit implements API mlx5_get_mtu(). It returns the MTU size as
saved in the device context since its creation.
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
This commit adds a new glue function query_rt_values to support the new
API mlx5_read_clock().
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add support for mlx5_link_update() to get link speed and link state.
Other parameters are currently hard-coded.
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
This commits adds ethdev stubs. These APIs are called from shared code
that must compile under Linux and Windows. The following stubs are added:
mlx5_set_mtu
mlx5_os_read_dev_counters
mlx5_intr_callback_unregister
mlx5_os_get_stats_n
mlx5_os_stats_init
mlx5_set_link_down
mlx5_set_link_up
mlx5_dev_get_flow_ctrl
mlx5_dev_set_flow_ctrl
mlx5_get_module_info
mlx5_get_module_eeprom
Signed-off-by: Ophir Munk <ophirmu@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
This commits implements API mlx5_get_mac(). It returns the MAC address
saved in the device context since its creation.
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Windows supports the primary process with no secondary process control.
This commit adds stubs for requests to start/stop the data-path to the
secondary process and for requests to start/stop a queue of the primary
process.
Signed-off-by: Ophir Munk <ophirmu@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
This commit is the Windows part implementation of
commit d5ed8aa944 ("net/mlx5: add memory region callbacks in per-device cache")
Signed-off-by: Ophir Munk <ophirmu@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
ibdev_name and ibdev_path sizes are defined in Windows DevX
differently from the sizes used in Linux with
IBV_SYSFS_NAME_MAX and IBV_SYSFS_PATH_MAX.
Added MLX5_FS_NAME_MAX and MLX5_FS_NAME_PATH in mlx5_os.h for both OSs.
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
There are two types of eth_dev_ops used under Windows: primary and
isolate mode. Their function calls initialization is added to the OS
specific file mlx5_os.c. Secondary process eth_dev_ops is nullified.
Signed-off-by: Ophir Munk <ophirmu@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Get the list of MAC addresses and verify if the input mac parameter
already exists. If not - return -ENOTSUP (as Windows does not support
adding new MAC addresses). If the MAC address exists (EEXIST) return 0
(the equivalent of Linux implementation of this API).
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
This commit is the Windows implementation of mlx5_os_get_dev_attr() API.
It follows the commit in [1]. A new file named mlx5_os.c is added under
windows directory as its Linux counterpart file: linux/mlx5_os.c.
[1].
commit e85f623e13 ("net/mlx5: remove attributes dependency on Verbs")
Signed-off-by: Ophir Munk <ophirmu@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
