Add a one-parameter function to take an existing rte_ring and wrap it as
an ethdev, returning the port id of the new ethdev instance.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add a new field to the rte_ring structure to store the memzone pointer which
contains the ring. For rings created using rte_ring_create(), the field will
be set automatically.
This new field will allow users of the ring to query the numa node a ring is
allocated on, or to get the physical address of the ring, if so needed.
The rte_ring structure will also maintain ABI compatibility, as the
structure members, after the new one, are set to be cache line aligned,
so leaving a space.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The ring ethdev creation function creates an ethdev, but does not
actually set it up for use. Even if it's just a single ring, the user
still needs to create a mempool, call rte_eth_dev_configure, then call
rx and tx setup functions before the ethdev can be used.
This patch changes things so that the ethdev is fully set up after the
call to create the ethdev. The above-mentionned functions can still be
called - as will be the case, for instance, if the NIC is created via
commandline parameters - but they no longer are essential.
The function now also sets rte_errno appropriately on error, so the
caller can get a better indication of why a call may have failed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Remove the deprecation tag and notice for imissed as it is a generic
register that accounts for packets that were dropped by the HW,
because there are no available mbufs (RX queues are full). imissed is
different to ierrors and can help with general debug.
Fixes: 49f386542af4 ("ethdev: remove driver specific stats")
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
This patch removes the mac local fault count and
mac remote fault count from rx errors. The mac
fault count registers count faults, not packets,
and hence should not be added to packet counters.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Add xstats() functions and statistic strings to virtio PMD.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
Add xstats() functions and statistic strings.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
Add implementation of xstats() functions in i40evf PMD.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
Add xstats functions to i40e PMD, allowing extended statistics
to be retrieved from the NIC and exposed to the DPDK.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
Add xstats() functions and stat strings as necessary to ixgbevf PMD.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
Added and updated statistic strings as used by xstats_get(),
exposed extended queue statistics.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
Add xstats_get() and xstats_reset() functions to igb
driver, and the necessary strings to expose these
NIC statistics.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
Update the strings used for presenting stats to adhere
to the scheme previously presented. Updated xstats_get()
function to handle Q information only if xstats() is not
implemented in the PMD, providing the PMD with the needed
flexibility to expose its extended Q stats.
Add extended statistic section to the programmers
guide, poll mode driver section. This section describes
how the strings stats are formatted, and how the client
code can use this to gather information about the stat.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
Make vhost-user virtio 1.0 compatible by adding it to the
supported features and keeping the header length
the same as for mergeable RX buffers.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
simple rx/tx func is chose when merge-able rx is disabled and user
specifies single segment and no offload support.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
Bulk free of mbufs when clean used ring.
Shift operation of idx could be saved if vq_free_cnt means
free slots rather than free descriptors.
TODO: rearrange vq data structure, pack the stats var together so that
we could use one vec instruction to update all of them.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
With fixed avail ring, we don't need to get desc idx from avail ring.
virtio driver only has to deal with desc ring.
This patch uses vector instruction to accelerate processing desc ring.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
Add software RX ring in virtqueue.
Add fake_mbuf in virtqueue for wraparound processing.
Fill avail ring with blank mbufs in virtio_dev_vring_start
Add virtio_rxtx.h header file for RTE_VIRTIO_PMD_MAX_BURST.
Would move all rx/tx related declarations into this header file in future.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
In DPDK based switching environment, mostly vhost runs on a dedicated core
while virtio processing in guest VMs runs on different cores.
Take RX for example, with generic implementation, for each guest buffer,
a) virtio driver allocates a descriptor from free descriptor list
b) modify the entry of avail ring to point to allocated descriptor
c) after packet is received, free the descriptor
When vhost fetches the avail ring, it need to fetch the modified L1 cache from
virtio core, which is a heavy cost in current CPU implementation.
This idea of this optimization is:
allocate the fixed descriptor for each entry of avail ring, so avail ring will
always be the same during the run.
This removes L1M cache transfer from virtio core to vhost core for avail ring.
(Note we couldn't avoid the cache transfer for descriptors).
Besides, descriptor allocation and free operation is eliminated.
This also makes vector procesing possible to further accelerate the processing.
This is the layout for the avail ring(take 256 ring entries for example), with
each entry pointing to the descriptor with the same index.
avail
idx
+
|
+----+----+---+-------------+------+
| 0 | 1 | 2 | ... | 254 | 255 | avail ring
+-+--+-+--+-+-+---------+---+--+---+
| | | | | |
| | | | | |
v v v | v v
+-+--+-+--+-+-+---------+---+--+---+
| 0 | 1 | 2 | ... | 254 | 255 | desc ring
+----+----+---+-------------+------+
|
|
+----+----+---+-------------+------+
| 0 | 1 | 2 | | 254 | 255 | used ring
+----+----+---+-------------+------+
|
+
This is the ring layout for TX.
As we need one virtio header for each xmit packet, we have 128 slots available.
++
||
||
+-----+-----+-----+--------------+------+------+------+
| 0 | 1 | ... | 127 || 128 | 129 | ... | 255 | avail ring
+--+--+--+--+-----+---+------+---+--+---+------+--+---+
| | | || | | |
v v v || v v v
+--+--+--+--+-----+---+------+---+--+---+------+--+---+
| 128 | 129 | ... | 255 || 128 | 129 | ... | 255 | desc ring for virtio_net_hdr
+--+--+--+--+-----+---+------+---+--+---+------+--+---+
| | | || | | |
v v v || v v v
+--+--+--+--+-----+---+------+---+--+---+------+--+---+
| 0 | 1 | ... | 127 || 0 | 1 | ... | 127 | desc ring for tx dat
+-----+-----+-----+--------------+------+------+------+
||
||
++
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
Vector RX function will process 4 packets at a time. When the RX
ring wrapps to the tail and the left descriptor size is not multiple
of 4, SW will overwrite memory that not belongs to it and cause crash.
The fix will allocate additional 4 HW/SW spaces at the tail to avoid
overwrite.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Add func fm10k_set_tx_function to decide the best TX func in
fm10k_dev_tx_init.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Vector TX use different way to manage TX queue, it's necessary
to use different functions to reset TX queue and release mbuf
in TX queue. So, introduce 2 function pointers to do such ops.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Since Vector RX use different variables to trace RX HW ring, it
leads to need different func to release mbuf properly.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
This patch add below functions:
1. Add function fm10k_rxq_rearm to re-allocate mbuf for used desc
in RX HW ring.
2. Add 2 functions, in which using SSE instructions to parse RX desc
to get pkt_type and ol_flags in mbuf.
3. Add func fm10k_recv_raw_pkts_vec to parse raw packets, in which
includes possible chained packets.
4. Add func fm10k_recv_pkts_vec to receive single mbuf packet.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Add new function fm10k_params_init to initialize all fm10k related
variables.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Add condition check in rx_queue_setup func. If number of RX desc
can't satisfy vPMD requirement, record it into a variable. Or
call fm10k_rxq_vec_setup to initialize Vector RX.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Add new file fm10k_rxtx_vec.c and add it into compiling.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Add the ability for the upper layer to query RX/TX queue information.
Add into rte_eth_dev_info new fields to represent information about
RX/TX descriptors min/max/alig nnumbers per queue for the device.
Add new structures:
struct rte_eth_rxq_info
struct rte_eth_txq_info
new functions:
rte_eth_rx_queue_info_get
rte_eth_tx_queue_info_get
into rte_etdev API.
Left extra free space in the queue info structures,
so extra fields could be added later without ABI breakage.
Add new fields:
rx_desc_lim
tx_desc_lim
into rte_eth_dev_info.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
According to XL710 datasheet:
RX QLEN restrictions: When the PXE_MODE flag in the GLLAN_RCTL_0
register is cleared, the QLEN must be whole number of 32
descriptors.
TX QLEN restrictions: When the PXE_MODE flag in the GLLAN_RCTL_0
register is cleared, the QLEN must be whole number of 32
descriptors.
So make sure that for both RX and TX queues number of HW descriptors is
a multiple of 32.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This patch adds fills bonding port's stats with a sum of corresponding
values taken from bonded slaves, when stats are requested for bonding port.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This implementation allows to set and read RSS configuration for null
device, and is used to validate right values propagation over the slaves,
in test units for dynamic RSS configuration for bonding.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Tetsuya Mukawa <mukawa@igel.co.jp>
This patch adds a possibility to configure more than one queue on null
device.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Tetsuya Mukawa <mukawa@igel.co.jp>
This patch initializes eth_dev->link_intr_cbs queue used when null pmd is
added to the bonding.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Bonding device implements independent management of RSS settings. It
stores its own copies of settings i.e. RETA, RSS hash function and RSS
key. It’s required to ensure consistency.
1) RSS hash function set for bonding device is maximal set of RSS hash
functions supported by all bonded devices. That mean, to have RSS support
for bonding, all slaves should be RSS-capable.
2) RSS key is propagated over the slaves "as is".
3) RETA for bonding is an internal table managed by bonding API, and is
used as a pattern to set up slaves. Its size is GCD of all RETA sizes, so
it can be easily used as a pattern providing expected behavior, even if
slaves RETA sizes are different.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Add separate functions to configure VMDQ and RSS.
Update dglort map and logic ports accordingly.
Reset MAC/VLAN filter after VMDQ config was changed.
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
