When taking events from a port, we checked the history list to check if the
event needed to be put back in order i.e. originally came from a reordered
queue type. The check for reordering involved checking if the reorder
buffer entry pointer was null. However, after that pointer was used it was
never cleared to null again.
This caused problems when we had mixed reordered and atomic or parallel
events, as the events from the latter two queue types were misidentified as
needing reordering. This let in some cases to crashes, but mostly led to
dropping events, and then application lock-up.
Fixes: 617995dfc5 ("event/sw: add scheduling logic")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
This patch returns a credit when an rte_event is
enqueued with an invalid queue_id. Previously a
credit was leaked from the system.
Note that the eventdev instance does not attempt
to free any resources that the rte_event owns. As
a result, resources owned by the rte_event are leaked.
Eg. if the rte_event represents an rte_mbuf, the mbuf
will not be freed, and causes a leak from the mempool.
Fixes: 656af91800 ("event/sw: add worker core functions")
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
The flow id of packets was not being hashed on ingress
on an ordered queue. Fix by applying same hashing as is
applied in the atomic queue case. The hashing itself is
broken out into a macro to avoid duplication of code.
Fixes: 617995dfc5 ("event/sw: add scheduling logic")
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This is a preparation to embed the generic rte_device into the rte_eth_dev
also for virtual devices.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
build error:
.../event/sw/sw_evdev_worker.c: In function ‘sw_event_release’:
.../event/sw/sw_evdev_worker.c:52:3: error: unknown field ‘op’ specified
in initializer
Fixed by updating struct initialization.
Fixes: 656af91800 ("event/sw: add worker core functions")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
build error:
.../drivers/event/octeontx/ssovf_worker.c(212):
error #592: variable "get_work0" is used before its value is set
RTE_SET_USED(get_work0);
^
.../drivers/event/octeontx/ssovf_worker.c(213):
error #592: variable "get_work1" is used before its value is set
RTE_SET_USED(get_work1);
^
For x86 these variables set but not used, move macros below
where values assigned.
Fixes: f61808eaa9 ("event/octeontx: add start function")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
If device is configured with RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT
configuration then use different fast path dequeue handler to wait till
requested amount of nanosecond if the event is not available.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
SSO co-processor runs at a different frequency than core clock.
Request PF to convert the ns to SSO get_work timeout period.
On dequeue, If device is configured with
RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT configuration then
use different fast path dequeue handler to wait till requested
amount of nanosecond if the event is not available.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Gage Eads <gage.eads@intel.com>
queues to port link and unlink establishment is through
setting/resetting the queue/group membership in
SSOW_VHWS_GRPMSK_CHGX
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Gage Eads <gage.eads@intel.com>
Add in the data-structures for the ports used by workers
to sent events to/from the HW scheduler. Also add a
function to release the resource allocated in setup
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Gage Eads <gage.eads@intel.com>
Pretty much everything done in HW. Need to configure
the priority associated with event queue aka sso group
through a mailbox request to PF
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Gage Eads <gage.eads@intel.com>
Add the info_get function to return details on the queues, flow,
prioritization capabilities, etc. which this device has.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Gage Eads <gage.eads@intel.com>
This adds the minimal changes to allow a octeontx eventdev
implementation to be compiled, linked and created at run time.
The eventdev does nothing, but can be created via vdev
on command line, e.g.
sudo ./build/app/test -c 0xff00 --vdev=event_octeontx
...
Initializing event_octeontx domain=4 max_queues=64 max_ports=32
RTE>>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Gage Eads <gage.eads@intel.com>
ssovf VF device has mailbox mechanism to communicate
with PF device. This patch adds support for a mbox API to
send the mailbox request to PF device.
The ssovf VF device will be used as the communication channel
to talk to PF devices of all the network accelerated
co-processors in Octeontx. Exposing as shared function to
use it from pool, crypto, network devices.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
ssovf and ssowvf PCIe VF devices are shared
between eventdev PMD and ethdev PMD. This patch
expose a set of interface API to get info
about probed ssovf and ssowvf VF resources to use
with eventdev and ethdev vdev devices latter.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Gage Eads <gage.eads@intel.com>
An event device consists of event queues and event ports.
On Octeontx HW, each event queues(sso group/ssovf) and
event ports(sso hws/ssowvf) are enumerated as separate
SRIOV VF PCIe device. In order to expose as an event device,
On PCIe probe, the driver stores the information associated
with the PCIe device and later with vdev infrastructure
creates event device with earlier probed PCIe VF devices.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Gage Eads <gage.eads@intel.com>
An event device consists of event queues and event ports.
On Octeontx HW, each event queues(sso group/ssovf) and
event ports(sso hws/ssowvf) are enumerated as separate
SRIOV VF PCIe device. In order to expose as an event device,
On PCIe probe, the driver stores the information associated
with the PCIe device and later with vdev infrastructure
creates event device with earlier probed PCIe VF devices.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Gage Eads <gage.eads@intel.com>
Add support for xstats to report out on the state of the eventdev.
Useful for debugging and for unit tests, as well as observability
at runtime and performance tuning of apps to work well with the
scheduler.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Segfault issue resolved when only partially configured and
rte_event_dev_dump() is called before start(),
Reported-by: Vipin Varghese <vipin.varghese@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add in the scheduling function which takes the events from the
producer queues and buffers them before scheduling them to consumer
queues. The scheduling logic includes support for atomic, reordered,
and parallel scheduling of flows.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
add the event enqueue, dequeue and release functions to the eventdev.
These also include tracking of stats for observability in the load of
the scheduler.
Internally in the enqueue function, the various types of enqueue
operations, to forward an existing event, to send a new event, to
drop a previous event, are converted to a series of flags which will
be used by the scheduler code to perform the needed actions for that
event.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add in the data-structures for the ports used by workers to send
packets to/from the scheduler. Also add in the functions to
create/destroy those ports.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add in the data structures for the event queues, and the eventdev
functions to create and destroy those queues.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add in the info_get function to return details on the queues, flow,
prioritization capabilities, etc. that this device has.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This adds the minimal changes to allow a SW eventdev implementation to
be compiled, linked and created at run time. The eventdev does nothing,
but can be created via vdev on commandline, e.g.
sudo ./x86_64-native-linuxapp-gcc/app/test --vdev=event_sw0
...
PMD: Creating eventdev sw device event_sw0, numa_node=0, sched_quanta=128
RTE>>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
PMDs that only do a specific type of scheduling cannot provide
CFG_ALL_TYPES, so the Eventdev infrastructure should not demand
that every PMD supports CFG_ALL_TYPES.
By not overriding the default configuration of the queue as
suggested by the PMD, the eventdev_common unit tests can pass
on all PMDs, regardless of their capabilities.
RTE_EVENT_QUEUE_CFG_DEFAULT is no longer used by the eventdev layer
it can be removed now. Applications should use CFG_ALL_TYPES
if they require enqueue of all types a queue, or specify which
type of queue they require.
The CFG_DEFAULT value is changed to CFG_ALL_TYPES in event/skeleton,
to not break the compile.
A capability flag is added that indicates if the underlying PMD
supports creating queues of ALL_TYPES.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
eventdev driver may return error on dequeue timeout tick conversion.
Change the pmd callback interface to address the same.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
rte_device is a generic device which is available to the applications
and EAL. This patch replaces rte_pci_device in 'struct rte_eventdev'
and in 'struct rte_event_dev_info' with common rte_device.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Removed global index based device name
generation as vdev uninit needs the exact driver
name used vdev init.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Added a pointer to the rte_eventdev type in the event port
link and unlink callbacks. This device shall be used by some
of the event drivers to fetch queue related information.
Also, update the skeleton eventdev driver with corresponding changes.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The skeleton driver facilitates, bootstrapping the new
eventdev driver and creates a platform to verify
the northbound eventdev common code.
The driver supports both VDEV and PCI based eventdev
devices.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
