Add support for item PORT_REPRESENTOR which should
be used instead of ambiguous item PORT_ID.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Action PORT_ID implementation assumes ingress only. Its semantics
suggests that support for equal action PORT_REPRESENTOR be added.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Semantics of the existing support for action PORT_ID suggests
that support for equal action REPRESENTED_PORT be implemented.
Helper functions keep port_id suffix since action
MLX5_FLOW_ACTION_PORT_ID is still used internally.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add support for actions PORT_REPRESENTOR and REPRESENTED_PORT
based on the existing support for action PORT_ID.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Add support for actions PORT_REPRESENTOR and REPRESENTED_PORT
based on the existing support for action PORT_ID.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add support for items PORT_REPRESENTOR and REPRESENTED_PORT
based on the existing support for item PORT_ID.
The use of item PORT_ID depends on the specified direction attribute.
Items PORT_REPRESENTOR and REPRESENTED_PORT, in turn, define traffic
direction themselves. The former matches traffic from the driver's
vNIC. The latter matches packets from either a v-port (network) or
a VF's vNIC (if the driver's port is a VF representor).
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
For use in "transfer" flows. Supposed to send matching traffic to the
entity represented by the given ethdev, at embedded switch level.
Such an entity can be a network (via a network port), a guest
machine (via a VF) or another ethdev in the same application.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
For use in "transfer" flows. Supposed to send matching traffic to
the given ethdev (to the application), at embedded switch level.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
For use in "transfer" flows. Supposed to match traffic entering the
embedded switch from the entity represented by the given ethdev.
Such an entity can be a network (via a network port), a guest
machine (via a VF) or another ethdev in the same application.
Must not be combined with direction attributes.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
For use in "transfer" flows. Supposed to match traffic
entering the embedded switch from the given ethdev.
Must not be combined with direction attributes.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
GROUP is an in-house term for so-called "tunnel_match" flows.
On parsing, they are detected by virtue of PMD-internal item
MARK. It associates a given flow with its tunnel context.
Such a flow is represented by a MAE action rule which is
chained with the corresponding JUMP rule's outer rule
by virtue of matching on its recirculation ID.
GROUP flows do narrower match than JUMP flows do and
decapsulate matching packets (full offload).
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
JUMP is an in-house term for so-called "tunnel_set" flows. On parsing,
they are identified by virtue of actions MARK (PMD-internal) and JUMP.
The action MARK associates a given flow with its tunnel context.
Such a flow is represented by a MAE outer rule (OR) which has its
recirculation ID set. This ID is also associated with the tunnel
context. The OR is supposed to set this ID in 8 high bits of
Rx mark in matching packets. It also counts the packets.
Packets that hit the OR but miss in action rule (AR) table,
should go to MAE admin PF (that is, to DPDK) by default.
Support for the use of action COUNT in JUMP
flows will be introduced by later patches.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Provide minimal implementation for port representors that only can be
configured and can provide device information.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Add the argument that allows user to choose either switchdev or legacy
mode. Legacy mode enables switching by using Ethernet virtual bridging
(EVB) API. In switchdev mode, VF traffic goes via port representor
(if any) on PF, and software virtual switch (for example, Open vSwitch)
steers the traffic.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
rte_eth_rx_descriptor_status() should be used as a replacement.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Fix the mempool flags namespace by adding an RTE_ prefix to the name.
The old flags remain usable, to be deprecated in the future.
Flag MEMPOOL_F_NON_IO added in the release is just renamed to have RTE_
prefix.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
When the first port in a given protection domain (PD) starts,
install a mempool event callback for this PD and register all existing
memory regions (MR) for it. When the last port in a PD closes,
remove the callback and unregister all mempools for this PD.
This behavior can be switched off with a new devarg: mr_mempool_reg_en.
On TX slow path, i.e. when an MR key for the address of the buffer
to send is not in the local cache, first try to retrieve it from
the database of registered mempools. Supported are direct and indirect
mbufs, as well as externally-attached ones from MLX5 MPRQ feature.
Lookup in the database of non-mempool memory is used as the last resort.
RX mempools are registered regardless of the devarg value.
On RX data path only the local cache and the mempool database is used.
If implicit mempool registration is disabled, these mempools
are unregistered at port stop, releasing the MRs.
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Fix spelling error which is causing reports of other patches failing.
Fixes: 69daa9e5022b ("net/cnxk: support inline security setup for cn10k")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The guides should be referenced locally with RST syntax
:doc: (beginning of page) or :ref: (specific chapter).
The links to doc.dpdk.org/guides/ are removed.
The links to the doc.dpdk.org/api/ are acceptable,
but should not point to a specific version, so one is fixed.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: David Marchand <david.marchand@redhat.com>
A more fine-grain flow API action RTE_FLOW_ACTION_TYPE_SAMPLE should
be used instead of it.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds support to configure channel mask which will
be used by rte flow when adding flow rules with inline IPsec
action.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add support for inline inbound and outbound IPSec for SA create,
destroy and other NIX / CPT LF configurations.
This patch also changes dpdk-devbind.py to list new inline
device as misc device.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The af_packet pmd driver binds to a raw socket and allows sending and
receiving of packets through the kernel.
Since commit [1], the kernel strips the vlan tags early in
__netif_receive_skb_core(), so we receive untagged packets while running
with the af_packet pmd.
Luckily for us, the skb vlan-related fields are still populated from the
stripped vlan tags, so we end up having all the information that we need
in the mbuf.
Having the pmd driver support DEV_RX_OFFLOAD_VLAN_STRIP allows the
application to control the desired vlan stripping behavior, until we
have a way to describe offloads that can't be disabled by pmd drivers.
This patch will cause a change in the default way that the af_packet pmd
treats received vlan-tagged frames. While previously, the application
was required to check the PKT_RX_VLAN_STRIPPED flag, after this patch,
the pmd will re-insert the vlan tag transparently to the user, unless
the DEV_RX_OFFLOAD_VLAN_STRIP is enabled in rxmode.offloads.
I've attempted a preliminary benchmark to understand if the change could
cause a sizable performance hit.
Setup:
Two virtual machines running on top of an ESXi hypervisor
Tx: DPDK app (running on top of vmxnet3 PMD)
Rx: af_packet (running on top of a kernel vmxnet3 interface)
Packet size :68 (packet contains a vlan tag)
Rates:
Tx - 1.419 Mpps
Rx (without vlan insertion) - 1227636 pps
Rx (with vlan insertion) - 1220081 pps
At a first glance, we don't seem to have a large degradation in terms of
packet rate.
[1]
https://github.com/torvalds/linux/commit/bcc6d47903612c3861201cc3a866fb60
Signed-off-by: Tudor Cornea <tudor.cornea@gmail.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add support to fetch port and queue stats via xstats API. Also remove
queue stats from basic stats because they're now available via xstats
API for the VF.
Signed-off-by: Nikhil Vasoya <nikhil.vasoya@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
This patch enables building the ixgbe driver for Windows.
It also enables its dependencies on security and cryptodev.
I tested on AWS using ixgbe VF device, using dpdk-testpmd.
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Pallavi Kadam <pallavi.kadam@intel.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
TX redirection support by flow action RTE_FLOW_ACTION_TYPE_PHY_PORT
and RTE_FLOW_ACTION_TYPE_PORT_ID
This action is executed by HW to forward packets between ports.
If the ingress packets match the rule, the packets are switched
without software involved and perf is improved as well.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Add ice support for new ethdev APIs to enable/disable and read/write/adjust
IEEE1588 PTP timestamps. Currently, only scalar path supports 1588 PTP,
vector path doesn't.
The example command for running ptpclient is as below:
./build/examples/dpdk-ptpclient -c 1 -n 3 -- -T 0 -p 0x1
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Use the dynamic mbuf to register timestamp field and flag.
The ice has the feature to dump Rx timestamp value into dynamic
mbuf field by flex descriptor. This feature is turned on by dev
config "enable-rx-timestamp". Currently, it's only supported
under scalar path.
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The default VF driver for Intel 700 Series Ethernet Controller already
switch to iavf in DPDK 21.05. And i40evf is no need to maintain now,
so remove i40evf related code.
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Due to i40evf will be removed, so there's no need to keep the devargs
option "driver=i40evf" in iavf.
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
- Enable IAVF PMD build on Windows
- Replace x86intrin.h with rte_vect.h to avoid __m_prefetchw conflicting
types
- Fix for pointer and integer sign warnings using Clang compiler on
Windows
- Add extra cflags '-fno-asynchronous-unwind-tables'
to avoid MinGW build error:
Error: invalid register for .seh_savexmm
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Shivanshu Shukla <shivanshu.shukla@intel.com>
The E810 supports four single-ended GPIO signals (SDP[20:23]). The 1PPS
signal outputs via SDP[20:23], which is measured by an oscilloscope.
This feature can be turned by a devargs which can select GPIO pin index
flexibly. Pin index 0 means SDP20, pin index 1 means SDP21 and so on.
The example for test command is as below:
./build/app/dpdk-testpmd -a af:00.0,pps_out='[pin:2]' -c f -n 4 -- -i
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Not all net PMD's/HW can parse packet and identify L2 header and
L3 header locations on Tx. This is inline with other Tx offloads
requirements such as L3 checksum, L4 checksum offload, etc,
where mbuf.l2_len, mbuf.l3_len etc, needs to be set for HW to be
able to generate checksum. Since Inline IPsec is also such a Tx
offload, some PMD's at least need mbuf.l2_len to be valid to
find L3 header and perform Outbound IPSec processing.
Hence, this patch updates documentation to enforce setting
mbuf.l2_len while setting PKT_TX_SEC_OFFLOAD in mbuf.ol_flags
for Inline IPsec Crypto / Protocol offload processing to
work on Tx.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Update the Minimal SW and HW version offload support
information for ASO metering and metering hierarchy.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Asaf Penso <asafp@nvidia.com>
PCI, vmbus, and auxiliary drivers printed a warning
when NUMA node had been reported as (-1) or not reported by OS:
EAL: Invalid NUMA socket, default to 0
This message and its level might confuse users because the configuration
is valid and nothing happens that requires attention or intervention.
It was also printed without the device identification and with an indent
(PCI only), which is confusing unless DEBUG logging is on to print
the header message with the device name.
Reduce level to INFO, reword the message, and suppress it when there is
only one NUMA node because NUMA awareness does not matter in this case.
Also, remove the indent for PCI.
Fixes: f0e0e86aa35d ("pci: move NUMA node check from scan to probe")
Fixes: 831dba47bd36 ("bus/vmbus: add Hyper-V virtual bus support")
Fixes: 1afce3086cf4 ("bus/auxiliary: introduce auxiliary bus")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Reviewed-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Reviewed-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
In the recent update, the misc5 matcher was introduced to
match VxLAN header extra fields. However, ConnectX-5
doesn't support misc5 for the UDP ports different from
VXLAN's standard one (4789).
Need to fall back to the previous approach and use legacy
misc matcher if non-standard UDP port is recognized
in VxLAN flow.
Fixes: 630a587bfb37 ("net/mlx5: support matching on VXLAN reserved field")
Cc: stable@dpdk.org
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Spell checked and corrected documentation.
If there are any errors, or I have changed something that wasn't an error
please reach out to me so I can update the dictionary.
Cc: stable@dpdk.org
Signed-off-by: Henry Nadeau <hnadeau@iol.unh.edu>
The prerequisite info is already present in the platform guide.
No need to repeat it in individual dev guides.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Allow user to specify his own hash key and hash ctrl if the
device is supporting that. HW interprets the key in reverse byte order,
so the PMD reorders the key before passing it to the ena_com layer.
Default key is being set in random matter each time the device is being
initialized.
Moreover, make minor adjustments for reta size setting in terms
of returning error values.
RSS code was moved to ena_rss.c file to improve readability.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Shay Agroskin <shayagr@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
In order to support asynchronous Rx in the applications, the driver has
to configure the event file descriptors and configure the HW.
This patch configures appropriate data structures for the rte_ethdev
layer, adds .rx_queue_intr_enable and .rx_queue_intr_disable API
handlers, and configures IO queues to work in the interrupt mode, if it
was requested by the application.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Artur Rojek <ar@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Shay Agroskin <shayagr@amazon.com>
The support of RFC2698 and RFC4115 are added in mlx5 PMD. Only the
ASO metering supports these two profiles.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
In the previous implementation, the policy for yellow color was not
supported. The action validation for yellow was skipped.
Since the yellow color policy needs to be supported, the validation
should also be done for the yellow color. In the meanwhile, due to
the fact that color policies of one meter should be used for the
same flow(s), the domains supported of both colors should be the
same. If both of the colors have RSS as the termination actions,
except the queues, all other parameters of RSS should be the same.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Introduce SF support.
Similar to VF, SF on auxiliary bus is a portion of hardware PF,
no representor or bonding parameters for SF.
Devargs to support SF:
-a auxiliary:mlx5_core.sf.8,dv_flow_en=1
New global syntax to support SF:
-a bus=auxiliary,name=mlx5_core.sf.8/class=eth/driver=mlx5,dv_flow_en=1
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
For now, a rule may have only one dedicated counter, shared counters
are not supported.
HW delivers (or "streams") counter readings using special packets.
The driver creates a dedicated Rx queue to receive such packets
and requests that HW start "streaming" the readings to it.
The counter queue is polled periodically, and the first available
service core is used for that. Hence, the user has to specify at least
one service core for counters to work. Such a core is shared by all
MAE-capable devices managed by sfc driver.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Add support for rte_flow_item_raw to parse custom L2 and L3
protocols.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Query MLX5 port hardware if it is capable to offload IPv4
IHL field.
Provide flow rules capability to match on IPv4 IHL field.
Minimal HCA firmware version required to offload IPv4 IHL is
xx_30_2000.
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
