MRVL net pmd needs rte_cfgfile to parse QoS configuration file thus
librte_pmd_mrvl.a contains undefined symbols from librte_cfgfile.a.
As a result linking applications under app/ directory will fail
because librte_cfgfile.a comes before librte_pmd_mrvl.a during
the linking stage.
Linking the whole librte_cfgfile.a solves the issue.
Signed-off-by: Jacek Siuda <jck@semihalf.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Generic Segmentation Offload (GSO) is a SW technique to split large
packets into small ones. Akin to TSO, GSO enables applications to
operate on large packets, thus reducing per-packet processing overhead.
To enable more flexibility to applications, DPDK GSO is implemented
as a standalone library. Applications explicitly use the GSO library
to segment packets. To segment a packet requires two steps. The first
is to set proper flags to mbuf->ol_flags, where the flags are the same
as that of TSO. The second is to call the segmentation API,
rte_gso_segment(). This patch introduces the GSO API framework to DPDK.
rte_gso_segment() splits an input packet into small ones in each
invocation. The GSO library refers to these small packets generated
by rte_gso_segment() as GSO segments. Each of the newly-created GSO
segments is organized as a two-segment MBUF, where the first segment is a
standard MBUF, which stores a copy of packet header, and the second is an
indirect MBUF which points to a section of data in the input packet.
rte_gso_segment() reduces the refcnt of the input packet by 1. Therefore,
when all GSO segments are freed, the input packet is freed automatically.
Additionally, since each GSO segment has multiple MBUFs (i.e. 2 MBUFs),
the driver of the interface which the GSO segments are sent to should
support to transmit multi-segment packets.
The GSO framework clears the PKT_TX_TCP_SEG flag for both the input
packet, and all produced GSO segments in the event of success, since
segmentation in hardware is no longer required at that point.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Membership library is an extension and generalization of a traditional
filter (for example Bloom Filter and cuckoo filter) structure.
In general, the Membership library is a data structure that provides a
"set-summary" and responds to set-membership queries of whether a
certain element belongs to a set(s). A membership test for an element
will return the set this element belongs to or not-found if the
element is never inserted into the set-summary.
The results of the membership test are not 100% accurate. Certain
false positive or false negative probability could exist. However,
comparing to a "full-blown" complete list of elements, a "set-summary"
is memory efficient and fast on lookup.
This patch adds the main API definition.
Signed-off-by: Yipeng Wang <yipeng1.wang@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The -march=atom flag is for older atom CPUs and don't support SSE4 which
is the minimum requirement for DPDK. And in fact, the current atom CPUs
support SSE4. So this patch removes atom as a target for DPDK builds and
adds a silvermont replacement instead.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This removes the dependency on specific Mellanox OFED libraries by
using the upstream rdma-core and linux upstream community code.
Both rdma-core upstream and Mellanox OFED are Linux user-space packages:
1. Rdma-core is Linux upstream user-space package.(Generic)
2. Mellanox OFED is Mellanox's Linux user-space package.(Proprietary)
The difference between the two are the APIs towards the kernel.
Support for x86-32 is removed due to issues in rdma-core library.
ICC compilation will be supported as soon as the following patch is
integrated in rdma-core:
https://marc.info/?l=linux-rdma&m=150643474705690&w=2
Signed-off-by: Shachar Beiser <shacharbe@mellanox.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Users can now use 'make defconfig' to generate a configuration using
the most appropriate defaults for the current machine.
<arch-machine-execenv-toolchain>
arch taken from uname -m
machine defaults to native
execenv is taken from uname, Linux=linuxapp, otherwise bsdapp
toolchain is taken from $CC -v to see which compiler to use
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
When using the compiler to link libraries, include EXTRA_CFLAGS. This is
needed when cross-compiling to pass --sysroot, for example. GCC
cross-compilers built with Yocto don't use the --with-sysroot option,
making it necessary to pass the --sysroot command-line option.
This is the same solution as in commit e8fbb6d9cf ("mk: use extra cflags
when linking with compiler"), but applied to libs instead of apps.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Introduce the fail-safe poll mode driver initialization and enable its
build infrastructure.
This PMD allows for applications to benefit from true hot-plugging
support without having to implement it.
It intercepts and manages Ethernet device removal events issued by
slave PMDs and re-initializes them transparently when brought back.
It also allows defining a contingency to the removal of a device, by
designating a fail-over device that will take on transmitting operations
if the preferred device is removed.
Applications only see a fail-safe instance, without caring for
underlying activity ensuring their continued operations.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Used rte_log2_u32() to replace integer log2() to
remove libm dependency.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
NXP Copyright has been wrongly worded with '(c)' at various places.
This patch removes these extra characters. It also removes
"All rights reserved".
Only NXP copyright syntax is changed. Freescale copyright is not
modified.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Generic Receive Offload (GRO) is a widely used SW-based offloading
technique to reduce per-packet processing overhead. It gains
performance by reassembling small packets into large ones. This
patchset is to support GRO in DPDK. To support GRO, this patch
implements a GRO API framework.
To enable more flexibility to applications, DPDK GRO is implemented as
a user library. Applications explicitly use the GRO library to merge
small packets into large ones. DPDK GRO provides two reassembly modes.
One is called lightweight mode, the other is called heavyweight mode.
If applications want to merge packets in a simple way and the number
of packets is relatively small, they can use the lightweight mode.
If applications need more fine-grained controls, they can choose the
heavyweight mode.
rte_gro_reassemble_burst is the main reassembly API which is used in
lightweight mode and processes N packets at a time. For applications,
performing GRO in lightweight mode is simple. They just need to invoke
rte_gro_reassemble_burst. Applications can get GROed packets as soon as
rte_gro_reassemble_burst returns.
rte_gro_reassemble is the main reassembly API which is used in
heavyweight mode and tries to merge N inputted packets with the packets
in GRO reassembly tables. For applications, performing GRO in heavyweight
mode is relatively complicated. Before performing GRO, applications need
to create a GRO context object, which keeps reassembly tables of
desired GRO types, by rte_gro_ctx_create. Then applications can use
rte_gro_reassemble to merge packets. The GROed packets are in the
reassembly tables of the GRO context object. If applications want to get
them, applications need to manually flush them by flush API.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
Replace the incorrect reference to "Cavium Networks", "Cavium Ltd"
company name with correct the "Cavium, Inc" company name in
copyright headers.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Since Intel Multi Buffer library for IPSec has been updated to
support Scatter Gather List, the AESNI GCM PMD can link
to this library, instead of the ISA-L library.
This move eases the maintenance of the driver, as it will
use the same library as the AESNI MB PMD.
It also adds support for 192-bit keys.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
armv8-a has optional CRYPTO extension which adds the
AES, PMULL, SHA1 and SHA2 capabilities. -march=armv8-a+crypto
enables code generation for the ARMv8-A architecture together
with the optional CRYPTO extensions.
Added the following flags to detect the corresponding
capability at compile time.
* RTE_MACHINE_CPUFLAG_AES
* RTE_MACHINE_CPUFLAG_PMULL
* RTE_MACHINE_CPUFLAG_SHA1
* RTE_MACHINE_CPUFLAG_SHA2
At run-time, the following flags can be used to detect the
capabilities.
* RTE_CPUFLAG_AES
* RTE_CPUFLAG_PMULL
* RTE_CPUFLAG_SHA1
* RTE_CPUFLAG_SHA2
Signed-off-by: Ashwin Sekhar T K <ashwin.sekhar@caviumnetworks.com>
Reviewed-by: Jan Viktorin <viktorin@rehivetech.com>
Increase the default baseline from "core2" architecture to "corei7". This
means that all builds will have SSE4.2 support included, and we can remove
special case manipulation of CFLAGS for the same. Naturally, this does mean
that some machines that previously could run DPDK now can't do so, but
hardware with SSE4.2 has been around for almost a decade now, so this
should not be a major problem.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
At some places, the log2() function is used despite this function
works on float. This introduces a dependency to the math lib but
most of the time it is not required because we want an integer log2.
Add a new helper to do this job and fix nfp driver.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Currently EAL allocates hugepages one by one not paying attention
from which NUMA node allocation was done.
Such behaviour leads to allocation failure if number of available
hugepages for application limited by cgroups or hugetlbfs and
memory requested not only from the first socket.
Example:
# 90 x 1GB hugepages availavle in a system
cgcreate -g hugetlb:/test
# Limit to 32GB of hugepages
cgset -r hugetlb.1GB.limit_in_bytes=34359738368 test
# Request 4GB from each of 2 sockets
cgexec -g hugetlb:test testpmd --socket-mem=4096,4096 ...
EAL: SIGBUS: Cannot mmap more hugepages of size 1024 MB
EAL: 32 not 90 hugepages of size 1024 MB allocated
EAL: Not enough memory available on socket 1!
Requested: 4096MB, available: 0MB
PANIC in rte_eal_init():
Cannot init memory
This happens beacause all allocated pages are
on socket 0.
Fix this issue by setting mempolicy MPOL_PREFERRED for each hugepage
to one of requested nodes using following schema:
1) Allocate essential hugepages:
1.1) Allocate as many hugepages from numa N to
only fit requested memory for this numa.
1.2) repeat 1.1 for all numa nodes.
2) Try to map all remaining free hugepages in a round-robin
fashion.
3) Sort pages and choose the most suitable.
In this case all essential memory will be allocated and all remaining
pages will be fairly distributed between all requested nodes.
New config option RTE_EAL_NUMA_AWARE_HUGEPAGES introduced and
enabled by default for linuxapp except armv7 and dpaa2.
Enabling of this option adds libnuma as a dependency for EAL.
Fixes: 77988fc08d ("mem: fix allocating all free hugepages")
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The --exclude parameter must be passed before the input directory to
tar, otherwise it's silently ignored and the .doctrees directory is
installed by make install-doc.
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Depending on the environment, make might echo the command being ran.
In mk/rte.sdkdoc.mk make is used to print the DPDK version to be
piped to doxygen. This causes the following to be written:
<div id="projectname">DPDK
 <span id="projectnumber">/usr/bin/make-f/build/dpdk-jYjqnr/
dpdk-16.11.2/mk/rte.sdkconfig.mkshowversion</span>
</div>
Use -s (--silent) to prevent echoing.
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Fixing typos across dpdk source code using codespell utility.
Skipped the ethdev driver's base code fixes to keep the base
code intact.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
DPAA2 devices now support cortex-a72. They no longer support a57.
Also fp and simd is no more required to be stated explicitly for
standard a72 core.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
There are two new warnings in GCC 7 that cause problems in the DPDK
compile.
1. GCC now warns if you have a switch fall-through without a suitable
comment indicating that it was intentional. The compiler supports a number
of levels of warning which are triggered depending on the type of message
used, with level 3 being the default. To accept a wider range of possible
fall-through messages, we adjust this down to level 2.
2. GCC also warns about an snprintf where there may be truncation and the
return value is not checked. Given that we often use snprintf in DPDK in
place of strncpy, and in many cases where truncation is not a problem, we
can just disable this particular warning.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Making AVX and AVX512 configurable is useful for performance and power
testing.
The similar kernel patch at https://patchwork.kernel.org/patch/9618883/.
AVX512 support like in rte_memcpy has been in DPDK since 16.04, but it's
still unproven in rich use cases in hardware. Therefore it's marked as
experimental for now, will enable it after enough field test and possible
optimization.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Reviewed-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
In case the output directory (O=) is undefined or a relative directory lets
turn it into an absolute path before passing it on. Otherwise the output
directory is created relative to the subdir, e.g. pktgen/app/build/... and
pktgen/lib/lua/src/build/...
Signed-off-by: Jan Blunck <jblunck@infradead.org>
When using the compiler to link applications, include EXTRA_CFLAGS. This
is needed, for example, when cross-compiling, to pass --sysroot.
GCC cross-compilers built with Yocto don't use the --with-sysroot option,
making it necessary to pass --sysroot command-line option.
Signed-off-by: John Jacques <john.jacques@intel.com>
Signed-off-by: Gage Eads <gage.eads@intel.com>
This script generates cscope, gtags, and tags index files based on
EAL environment(architecture and OS(linux/bsd)).
Selection of the architecture and OS environment is based on dpdk
configuration target(T=).If EAL environment(T=) is not specified,
the script generates tag files based on available source code.
Usage: make tags|cscope|gtags|etags [T=config]
example usage:
make cscope
make tags T=x86_64-native-linuxapp-gcc
make gtags T=arm64-armv8a-linuxapp-gcc
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Thomas Monjalon <thomas@monjalon.net>
Enable Arkville on supported configurations
Add overview documentation
Minimum driver support for valid compile
Arkville PMD is not supported on ARM or PowerPC at this time
Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Signed-off-by: John Miller <john.miller@atomicrules.com>
From the discussion in [1], it was observed that application should
have a default pool already linked even in case of shared builds.
Ring is especially important because packet mbuf creation API refer to
ring_mp_mc as default handler.
Documentation for this is pending.
[1] http://dpdk.org/ml/archives/dev/2017-April/063819.html
Fixes: 9a8e9b57f5 ("mempool: move ring handler as a driver")
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
clang 4 gives "taking address of packed member may result in an
unaligned pointer value" warnings in a few locations [1].
Disabled "-Waddress-of-packed-member" warning for clang >= 4
[1] build errors:
.../lib/librte_eal/common/eal_common_memzone.c:275:25:
error: taking address of packed member 'mlock' of class or structure
'rte_mem_config' may result in an unaligned pointer value
[-Werror,-Waddress-of-packed-member]
rte_rwlock_write_lock(&mcfg->mlock);
^~~~~~~~~~~
.../lib/librte_ip_frag/rte_ipv4_reassembly.c:139:31:
error: taking address of packed member 'src_addr' of class or structure
'ipv4_hdr' may result in an unaligned pointer value
[-Werror,-Waddress-of-packed-member]
psd = (unaligned_uint64_t *)&ip_hdr->src_addr;
^~~~~~~~~~~~~~~~
.../lib/librte_vhost/vhost_user.c:1037:34:
error: taking address of packed member 'payload' of class or structure
'VhostUserMsg' may result in an unaligned pointer value
[-Werror,-Waddress-of-packed-member]
vhost_user_set_vring_num(dev, &msg.payload.state);
^~~~~~~~~~~~~~~~~
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Disable for gcc < 4.7 and icc <= 14.0
PMD uses some compiler builtins and new compiler options. Tested with
gcc 4.5.1 and following were not supported:
option:
-Ofast
macros:
_Static_assert
__ORDER_LITTLE_ENDIAN__
__ORDER_BIG_ENDIAN__
__BYTE_ORDER__
__atomic_fetch_add
__ATOMIC_ACQUIRE
__atomic_load_n
__ATOMIC_RELAXED
__atomic_store_n
__ATOMIC_RELEASE
It is not easy to fix all in PMD, disabling PMD for older compilers.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
I get the following error when linking the test application:
build/lib/librte_pmd_thunderx_nicvf.a(nicvf_hw.o):
In function `nicvf_qsize_regbit':
drivers/net/thunderx/base/nicvf_hw.c:451: undefined reference to `log2'
build/lib/librte_pmd_thunderx_nicvf.a(nicvf_hw.o):
In function `nicvf_rss_reta_update':
drivers/net/thunderx/base/nicvf_hw.c:804: undefined reference to `log2'
build/lib/librte_pmd_thunderx_nicvf.a(nicvf_hw.o):
In function `nicvf_rss_reta_query':
drivers/net/thunderx/base/nicvf_hw.c:825: undefined reference to `log2'
While I don't know why it does not happen for a default build, the error
can be explained. The link command line is:
gcc -o test ... *.o ... -Wl,-lm ... -Wl,-lrte_pmd_thunderx_nicvf ...
rte_pmd_thunderx_nicvf needs the math library, and it should be
added after. This is not the case because the test application also
adds the math library.
The makefile already filters the libraries, but it keeps the first
occurrence of the lib. Instead, the last one should be kept.
Fixes: edf4d331dc ("mk: eliminate duplicates from libraries list")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
On my system, the version of the compiler is not properly retrieved,
resulting in strange logs when building the dpdk:
/bin/sh: line 0: test: too many arguments
This happens when mk/toolchain/clang/rte.toolchain-compat.mk is included
from a directory that use gcc to build (ex: kernel modules). In that
case, the CLANG_VERSION variable contains spaces that breaks some shell
calls to the test program.
The error is because the output of "gcc -v" on my system contains 2 lines
that matches the "version" string:
Configured with: ../src/configure -v \
--with-pkgversion='Debian 6.3.0-6' [...]
gcc version 6.3.0 20170205 (Debian 6.3.0-6)
This may be specific to Debian. Fix it by specializing the grep.
Fixes: 2ef6eea891 ("mk: add clang toolchain")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The file examples.dox was not re-generated when a file
is added or removed from examples/.
It is now removed on clean operation.
The ordering of operations (clean before generation) is also
better defined.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add a library designed to calculate latency statistics and report them
to the application when queried. The library measures minimum, average and
maximum latencies, and jitter in nano seconds. The current implementation
supports global latency stats, i.e. per application stats.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
This patch adds a library that calculates peak and average data-rate
statistics. For ethernet devices. These statistics are reported using
the metrics library.
Signed-off-by: Remy Horton <remy.horton@intel.com>
This patch adds a new information metrics library. This Metrics
library implements a mechanism by which producers can publish
numeric information for later querying by consumers. Metrics
themselves are statistics that are not generated by PMDs, and
hence are not reported via ethdev extended statistics.
Metric information is populated using a push model, where
producers update the values contained within the metric
library by calling an update function on the relevant metrics.
Consumers receive metric information by querying the central
metric data, which is held in shared memory.
Signed-off-by: Remy Horton <remy.horton@intel.com>
This adds the minimal changes to allow a SW eventdev implementation to
be compiled, linked and created at run time. The eventdev does nothing,
but can be created via vdev on commandline, e.g.
sudo ./x86_64-native-linuxapp-gcc/app/test --vdev=event_sw0
...
PMD: Creating eventdev sw device event_sw0, numa_node=0, sched_quanta=128
RTE>>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
