This patch removes information about deprecation of AES-GCM/GMAC
API for IV without J0.
Fixes: fac52fb26a54 ("cryptodev: add option to support both IV and J0 for GCM")
Cc: stable@dpdk.org
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
This patch marks the old igb-uio driver as unsecure when used
with the QAT PMD and updates all examples to recommend using
VFIO-PCI instead.
It also mentions security issues with the QAT CPM and provides
information about the new VFIO-PCI parameter 'disable_denylist'
available in Linux kernels 5.9 and later.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Since the built driver filenames have changed in DPDK 20.11, we need to
update the driver doc to match.
Most drivers start their section with the driver filename highlighted in
bold, while a number were missing the highlight. When updating the names,
add the markers for bold text to any missing it, so as to have things more
consistent.
Fixes: a20b2c01a7a1 ("build: standardize component names and defines")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Previously, the Tx timestamp field and flag were registered in testpmd,
as described in mlx5 guide.
For consistency between Rx and Tx timestamps,
managing mbuf registrations inside the driver, as properly documented,
is a simpler expectation.
The only driver to support this feature (mlx5) is updated
as well as the testpmd application.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This a revert of the commit 569758758dcd ("eventdev: add Rx timestamp").
If the Rx timestamp is not configured on the ethdev port,
there is no reason to set one.
Also the accuracy of the timestamp was bad because set at a late stage.
Anyway there is no trace of the usage of this timestamp.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The PMD uses a public interface to allow applications to
control the token pop mode. Supported token pop modes are
as follows, and they impact core scheduling affinity for
ldb ports.
AUTO_POP: Pop the CQ tokens immediately after dequeueing.
DELAYED_POP: Pop CQ tokens after (dequeue_depth - 1) events
are released. Supported on load-balanced ports
only.
DEFERRED_POP: Pop the CQ tokens during next dequeue operation.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Add support for dequeue, dequeue_burst, ...
DLB does not currently support interrupts, but instead uses
umonitor/umwait if supported by the processor. This allows
the software to monitor and wait on writes to a cache-line.
DLB supports normal and sparse cq mode. In normal mode the
hardware will pack 4 QEs into each cache line. In sparse cq
mode, the hardware will only populate one QE per cache line.
Software must be aware of the cq mode, and take the appropriate
actions, based on the mode.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Configure the load balanced (ldb) or directed (dir) port.
The consumer queue (CQ) and producer port (PP) are also
set up here.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Load balanced (ldb) queues are setup here.
Directed queues are not set up until link time, at which
point we know the directed port ID. Directed queue setup
will only fail if this queue is already setup or there are
no directed queues left to configure.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Add support for configuring the DLB hardware.
In particular, this patch configures the DLB
hardware's scheduling domain, such that it is provisioned with
the requested number of ports and queues, provided sufficient
resources are available. Individual queues and ports are
configured later in port setup and eventdev start.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Note that config/rte_config.h contains several configuration
switches, providing for fine control of the PMD's
runtime behaviour.
The meson infrastructure is expanded as additional files are
added to this patchset.
Adds announcement of availability of the new driver
for Intel Dynamic Load Balancer 1.0 hardware.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
The PMD uses a public interface to allow applications to
control the token pop mode. Supported token pop modes are
as follows, and they impact core scheduling affinity for
ldb ports.
AUTO_POP: Pop the CQ tokens immediately after dequeueing.
DELAYED_POP: Pop CQ tokens after (dequeue_depth - 1) events
are released. Supported on load-balanced ports
only.
DEFERRED_POP: Pop the CQ tokens during next dequeue operation.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Add support for dequeue, dequeue_burst, ...
DLB2 does not currently support interrupts, but instead use
umonitor/umwait if supported by the processor. This allows
the software to monitor and wait on writes to a cache-line.
DLB2 supports normal and sparse cq mode. In normal mode the
hardware will pack 4 QEs into each cache line. In sparse cq
mode, the hardware will only populate one QE per cache line.
Software must be aware of the cq mode, and take the appropriate
actions, based on the mode.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Configure the load balanced (ldb) or directed (dir) port.
The consumer queue (CQ) and producer port (PP) are also
set up here.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Load balanced (ldb) queues are setup here.
Directed queues are not set up until link time, at which
point we know the directed port ID. Directed queue setup
will only fail if this queue is already setup or there are
no directed queues left to configure.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Add support for configuring the DLB2 hardware.
In particular, this patch configures the DLB2
hardware's scheduling domain, such that it is provisioned with
the requested number of ports and queues, provided sufficient
resources are available. Individual queues and ports are
configured later in port setup and eventdev start.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Adds the meson build infrastructure, which includes
compile-time constants in rte_config.h. DLB2 is
only supported on Linux 64 bit X86 platforms at this time.
Adds announcement of availability for the new driver
for Intel Dynamic Load Balancer 2.0 hardware.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
The example used the deprecated mbuf field udata64.
It is moved to a dynamic field in order to allow removal of udata64.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The second field of metadata is reserved for user data
which was using a deprecated mbuf field.
It is moved to dynamic fields in order to allow removal of udata64.
The use of meta data must be enabled with a compile-time flag
RTE_PMD_ARK_{TX,RX}_USERDATA_ENABLE.
User data on Tx and Rx paths can be defined and used separately.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
The device-specific metadata was stored in the deprecated field udata64.
It is moved to a dynamic mbuf field in order to allow removal of udata64.
The name rte_security_dynfield is not very descriptive
but it should be replaced later by separate fields for each type of data
that drivers pass to the upper layer.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Add zero-copy APIs. These APIs provide the capability to
copy the data to/from the ring memory directly, without
having a temporary copy (for ex: an array of mbufs on
the stack). Use cases that involve copying large amount
of data to/from the ring can benefit from these APIs.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This example sets up a scenario that VXLAN packets can be received
by different PF queues based on VNID and each queue is bound to a VM
with a VNID so that the VM can receive its inner packets.
Usually, OVS is used to do the software encap/decap for VXLAN packets.
And the VXLAN packets offloading can be replaced with flow rules in
testpmd like Chapter "Sample VXLAN flow rules" in Testpmd Application
User Guide.
And this example hasn't been used for a long time.
So deprecate this example.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add new lookup implementation for FIB6 trie algorithm using
AVX512 instruction set
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add new lookup implementation for DIR24_8 algorithm using
AVX512 instruction set
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Updated references to abi versions in the contributors guide.
Fixed an inaccurate reference to a symbol in the policy.
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Fields except tbl24 and tbl8 in rte_lpm structure have no
need to be exposed to the user.
Hide the unneeded exposure of structure fields for better
ABI maintainability.
Suggested-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Currently, users have to use external RCU mechanisms to free resources
when using lock free hash algorithm.
Integrate RCU QSBR process to make it easier for the applications to use
lock free algorithm.
Refer to RCU documentation to understand various aspects of
integrating RCU library into other libraries.
Suggested-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Yipeng Wang <yipeng1.wang@intel.com>
The config options CONFIG_RTE_* are simple RTE_* defines with meson.
Now that make support is dropped, update the HPET config reference.
The comment about the AVX512 config option is not relevant anymore.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Added guide about building by using meson.
Also added the command to create virtual device.
Suggested-by: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
With 'make' being removed, the patch cheatsheet needs to be updated to
remove any references to 'make'. These references have been replaced with
meson alternatives in this patch.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Signed-off-by: Louise Kilheeney <louise.kilheeney@intel.com>
Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
While make has been deprecated for DPDK, it's still applicable for
some example apps to be built standalone, this patch adjusts the
guides to take that into consideration.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
A lot of drivers export headers, reproduce the same facility than for
libraries.
Note: this change fixes an issue with the crypto scheduler headers which
were not installed properly. A separate backport will be sent to stable
branches.
Suggested-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Fixes: 63b3907833d8 ("build: remove library name from version map file name")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
