Context memory is allocated from mempool. Ideally
it will get all memory from single segment, so simple offset
calculation is used for address conversion for such addresses
from context memory.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
With the current QBMAN multi-tx API, we need to create separate
enqueue descriptors for each of the packet which is required to
be enqueued to the hardware, once we support Atomic Queues
(with DCA) in dpaa2 drivers. Creating enqueue descriptor for
each packet is costly and have significant performance impact.
This patch introduces a flag parameter in the QBMAN multi-tx API,
so that DCA configuration (and later on ORP/ODP for ordered queues)
can be passed using flags and be updated in the EQCR using this flag.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch add support for dynamic iova detection for DPAA2
devices and use of virtual address in such cases.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
DPAA and DPAA2 drivers were using memseg physaddr, which
has been deprecated.
Fixes: 7ba49d39f14c ("mem: rename segment address from physical to IOVA")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Following changes are needed to switch to musdk-17.10:
- With a new version of the musdk library it's no longer necessary to
explicitly define MVCONF_ARCH_DMA_ADDR_T_64BIT and
CONF_PP2_BPOOL_COOKIE_SIZE.
Proper defines are auto generated by ./configure script based on
passed options and available after mv_autogen_comp_flags.h inclusion.
- API used to set promiscuous mode was renamed. Thus in order to
compile against the latest library new API must be used.
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Jianbo Liu <jianbo.liu@arm.com>
Repeated occurrences of 'the'.
The change was obtained using the following command:
sed -i "s;the the ;the ;" `git grep -l "the "`
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Move the vdev bus from lib/librte_eal to drivers/bus.
As the crypto vdev helper function refers to data structure
in rte_vdev.h, so we move those helper function into drivers/bus
too.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Renamed data type from phys_addr_t to rte_iova_t.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The following inline functions and macros have been renamed to be
consistent with the IOVA wording:
rte_mbuf_data_dma_addr -> rte_mbuf_data_iova
rte_mbuf_data_dma_addr_default -> rte_mbuf_data_iova_default
rte_pktmbuf_mtophys -> rte_pktmbuf_iova
rte_pktmbuf_mtophys_offset -> rte_pktmbuf_iova_offset
The deprecated functions and macros are kept to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Rename buf_physaddr to buf_iova.
Keep the deprecated name in an anonymous union to avoid breaking
the API.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The function rte_mempool_virt2phy() is renamed to rte_mempool_virt2iova().
The new function has one less parameter because it is unused.
The deprecated function is kept as an alias to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The struct rte_memzone field .phys_addr is renamed to .iova.
The deprecated name is kept in an anonymous union to avoid breaking
the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The memzone header is often included without good reason.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The file rte_config.h is generated and automatically included
with -include option.
The explicit includes in drivers and libraries are useless.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
When moving the library dependencies handling from top Makefiles
to library Makefiles, the list core-libs became useless.
Fixes: cbc12b0a96f5 ("mk: do not generate LDLIBS from directory dependencies")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The PCI lib defines the types and methods allowing to use PCI elements.
The PCI bus implements a bus driver for PCI devices by constructing
rte_bus elements using the PCI lib.
Move the relevant code out of the EAL to its expected place.
Libraries, drivers, unit tests and applications are updated to use the
new rte_bus_pci.h header when necessary.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Various symbols are being used by DPAA Crypto driver which were not exposed
from DPAA bus during initial version. This breaks the shared build.
This patch also adds the LDLIBS line required after (cbc12b0a9) patch.
Fixes: c3e85bdcc6e6 ("crypto/dpaa_sec: add crypto driver for NXP DPAA platform")
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Build fails when rte_security is disabled; make rte_security mandatory
Fixes: 0a23d4b6f4c2 ("crypto/dpaa2_sec: support protocol offload IPsec")
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Removes any dependency of librte_cryptodev on the PCI device
infrastructure code and removes the functions which were virtual
device specific.
Updates QAT crypto PMD to remove dependencies on rte_cryptodev_pci.h
and replaces those calls with the new bus independent functions.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Removes any dependency of librte_cryptodev on the virtual device
infrastructure code and removes the functions which were virtual
device specific.
Updates all virtual PMDs to remove dependencies on rte_cryptodev_vdev.h
and replaces those calls with the new bus independent functions.
Due to these changes, the cryptodev ABI version gets bumped.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Tomasz Duszynski <tdu@semihalf.com>
For HMAC algorithms (MD5-HMAC, SHAx-HMAC), the supported
digest sizes are not a fixed value, but a range between
1 and the maximum digest size for those algorithms.
Fixes: 26c2e4ad5ad4 ("cryptodev: add capabilities discovery")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Arkadiusz Kusztal <arkadiuszx.kusztal@intel.com>
Enable out of place buffer test cases in nxp dpaa2_sec
Signed-off-by: Alok Makhariya <alok.makhariya@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
In case MUSDK dma memory has been already initialized by a different
driver (and perhaps do the different size) mv_sys_dma_mem_init()
will return -EEXIST error code.
Printing extra message makes it clear.
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Using non-existent configuration option for enabling debug
messages will actually never enable them.
Fixes: 8a61c83af2fa ("crypto/mrvl: add mrvl crypto driver")
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Since CRYPTODEV_NAME_MRVL_CRYPTO_PMD is undefined RTE_STR() expands
it to "CRYPTODEV_NAME_MRVL_CRYPTO_PMD" instead of "crypto_mrvl".
This patch fixes that by using proper name definition in debug logs.
Fixes: 8a61c83af2fa ("crypto/mrvl: add mrvl crypto driver")
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
The code would crash for segmented buffer if no check.
Fixes: 8d1f3a5d751b ("crypto/dpaa2_sec: support crypto operation")
Cc: stable@dpdk.org
Signed-off-by: Alok Makhariya <alok.makhariya@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The code would crash in case of segmented buffer if no check
Fixes: c3e85bdcc6e6 ("crypto/dpaa_sec: add crypto driver for NXP DPAA platform")
Signed-off-by: Alok Makhariya <alok.makhariya@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Since the packet lengths are modified, it is not required to
explicitly reset the ICV.
Fixes: 13273250eec5 ("crypto/dpaa2_sec: support AES-GCM and CTR")
Fixes: 8d1f3a5d751b ("crypto/dpaa2_sec: support crypto operation")
Cc: stable@dpdk.org
Signed-off-by: Alok Makhariya <alok.makhariya@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Since the packet lengths are modified, it is not required to
explicitly reset the ICV.
Fixes: c3e85bdcc6e6 ("crypto/dpaa_sec: add crypto driver for NXP DPAA platform")
Signed-off-by: Alok Makhariya <alok.makhariya@nxp.com>
The list of libraries in LDLIBS was generated from the DEPDIRS-xyz
variable. This is valid when the subdirectory name match the library
name, but it's not always the case, especially for PMDs.
The patches removes this feature and explicitly adds the proper
libraries in LDLIBS.
Some DEPDIRS-xyz variables become useless, remove them.
Reported-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
The syntax "DEPDIRS-y = ..." is deprecated since
commit feb9f680cd2c ("mk: optimize directory dependencies").
Remove this uneffective lines.
The effective dependencies are already declared in
drivers/crypto/Makefile, so there is nothing to add.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
snprintf return value is the length of was encoded into destination
array excluding '\0'. Thus return value equal to the length of the
destination array or more means truncation.
This commit fixes improper use of the return value.
Fixes: eec136f3c54f ("aesni_gcm: add driver for AES-GCM crypto operations")
Fixes: 924e84f87306 ("aesni_mb: add driver for multi buffer based crypto")
Fixes: 0f548b50a160 ("crypto/aesni_mb: process crypto op on dequeue")
Fixes: 169ca3db550c ("crypto/armv8: add PMD optimized for ARMv8 processors")
Fixes: 2773c86d061a ("crypto/kasumi: add driver for KASUMI library")
Fixes: 94b0ad8e0aa5 ("null_crypto: add driver for null crypto operations")
Fixes: d61f70b4c918 ("crypto/libcrypto: add driver for OpenSSL library")
Fixes: 3aafc423cf4d ("snow3g: add driver for SNOW 3G library")
Fixes: cf7685d68f00 ("crypto/zuc: add driver for ZUC library")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add support to AES-CCM, for 128, 192 and 256-bit keys.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
When creating a session for AES-GCM, since the key is going
to be constant, the OpenSSL context can initialize the key
at that moment, leaving the setting of the IV for the
operation handling.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
When using AES-GCM with OpenSSL, cipher direction
and authentication operation were being set incorrectly,
as the PMD was looking at the cipher and authentication
transform, instead of the new AEAD.
Fixes: b79e4c00af0e ("cryptodev: use AES-GCM/CCM as AEAD algorithms")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
