Remove rte_pause() definition from rte_common.h and
switchover to architecture specific rte_pause.h
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Fixing typos across dpdk source code using codespell utility.
Skipped the ethdev driver's base code fixes to keep the base
code intact.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Before this patch, the management of dependencies between directories
had several issues:
- the generation of .depdirs, done at configuration is slow: it can take
more than one minute on some slow targets (usually ~10s on a standard
PC without -j).
- for instance, it is possible to express a dependency like:
- app/foo depends on lib/librte_foo
- and lib/librte_foo depends on app/bar
But this won't work because the directories are traversed with a
depth-first algorithm, so we have to choose between doing 'app' before
or after 'lib'.
- the script depdirs-rule.sh is too complex.
- we cannot use "make -d" for debug, because the output of make is used for
the generation of .depdirs.
This patch moves the DEPDIRS-* variables in the upper Makefile, making
the dependencies much easier to calculate. A DEPDIRS variable is still
used to process library dependencies in LDLIBS.
After this commit, "make config" is almost immediate.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Robin Jarry <robin.jarry@6wind.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
For periodic timers, if the lag gets introduced, the current code
added additional delay when the next peridoc timer was initialized
by not taking into account the delay added, with this fix the code
would start the next occurrence of timer keeping in account the
lag added. Corrected the behavior.
Fixes: 9b15ba89 ("timer: use a skip list")
Signed-off-by: Karmarkar Suyash <skarmarkar@sonusnet.com>
Acked-by: Robert Sanford <rsanford@akamai.com>
Exported header files used by applications should allow the strictest
compiler flags. Language extensions used in many places must be explicitly
marked to avoid warnings and compilation failures.
Unnamed structs/unions are allowed since C11, however many compiler
versions do not use this mode by default.
This commit prevents the following errors:
error: ISO C99 doesn't support unnamed structs/unions
error: struct has no named members
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
When timer_cb resets another running timer on the same lcore,
the list of expired timers is chained to the pending-list.
This commit prevents a running timer from being reset
by not its own timer_cb.
Fixes: a4b7a5a45c ("timer: fix race condition")
Signed-off-by: Hiroyuki Mikita <h.mikita89@gmail.com>
Acked-by: Robert Sanford <rsanford@akamai.com>
When timer_set_running_state() fails in rte_timer_manage(),
the failed timer is put back on pending-list.
In this case, another core tries to reset or stop the timer.
It does not need to be on pending-list.
Fixes: a4b7a5a45c ("timer: fix race condition")
Signed-off-by: Hiroyuki Mikita <h.mikita89@gmail.com>
Acked-by: Robert Sanford <rsanford@akamai.com>
This commit fixes incorrect pending-list manipulation
when getting list of expired timers in rte_timer_manage().
When timer_get_prev_entries() sets pending_head on prev,
the pending-list is broken.
The next of pending_head always becomes NULL.
In this depth level, it is not need to manipulate the list.
Fixes: 9b15ba895b ("timer: use a skip list")
Signed-off-by: Hiroyuki Mikita <h.mikita89@gmail.com>
Acked-by: Robert Sanford <rsanford@akamai.com>
Eliminate problematic race condition in rte_timer_manage() that can
lead to corruption of per-lcore pending-lists (implemented as
skip-lists). The race condition occurs when rte_timer_manage() expires
multiple timers on lcore A, while lcore B simultaneously invokes
rte_timer_reset() for one of the expiring timers (other than the first
one).
Lcore A splits its pending-list, creating a local list of expired timers
linked through their sl_next[0] pointers, and sets the first expired
timer to the RUNNING state, all during one list-lock round trip.
Lcore A then unlocks the list-lock to run the first callback, and that
is when A and B can have different interpretations of the subsequent
expired timers' true state. Lcore B sees an expired timer still in the
PENDING state, atomically changes the timer to the CONFIG state, locks
lcore A's list-lock, and reinserts the timer into A's pending-list.
The two lcores try to use the same next-pointers to maintain both lists!
Our solution is to remove expired timers from the pending-list and try
to set them all to the RUNNING state in one atomic step, i.e.,
rte_timer_manage() should perform these two actions within one
ownership of the list-lock.
After splitting the pending-list at the current point in time and trying
to set all expired timers to the RUNNING state, we must put back into
the pending-list any timers that we failed to set to the RUNNING state,
all while still holding the list-lock. It is then safe to release the
lock and run the callback functions for all expired timers that remain
on our local run-list.
Signed-off-by: Robert Sanford <rsanford@akamai.com>
This patch remove inconsistency between declaration of type
rte_timer_cb_t, field f in struct rte_timer and function
__rte_timer_reset().
Although compiler treat both of them the same, the static analysis tool
like complain about that.
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
- API rte_timer_reset() should return -1 when the timer is in the
RUNNING or CONFIG state. Instead, it ignores the return value of
internal function __rte_timer_reset() and always returns 0.
We change rte_timer_reset() to return the value returned by
__rte_timer_reset().
- Enhance timer stress test 2 to report how many timer reset
collisions occur, i.e., how many times rte_timer_reset() fails
due to a timer being in the CONFIG state.
Signed-off-by: Robert Sanford <rsanford2@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
In rte_timer_reset_sync(), insert rte_pause() into loop that waits
for rte_timer_reset() to succeed.
Signed-off-by: Robert Sanford <rsanford2@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Allow to setup timers only for EAL (lcore) threads (__lcore_id < MAX_LCORE_ID).
E.g. – dynamically created thread will be able to reset/stop timer for lcore thread,
but it will be not allowed to setup timer for itself or another non-lcore thread.
rte_timer_manage() for non-lcore thread would simply do nothing and return straightway.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
To differentiate libraries that break ABI, we add a library version number
suffix to the library, which must be incremented when a given libraries ABI is
broken. This patch enforces that addition, sets the initial abi soname
extension to 1 for each library and creates a symlink to the base SONAME so that
the test applications will link properly.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Add linker version script files to each DPDK library to put a stake in the
ground from which we can start cleaning up API's
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
No need for that 'x bit' on source files.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit removes trailing whitespace from lines in files. Almost all
files are affected, as the BSD license copyright header had trailing
whitespace on 4 lines in it [hence the number of files reporting 8 lines
changed in the diffstat].
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
[Thomas: remove spaces before tabs in libs]
[Thomas: remove more trailing spaces in non-C files]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Bug: When a timer is running
- if rte_timer_stop is called, the pending decrement is
skipped (decremented only if the timer is pending) and due
to the update flag the future processing is skipped so the
timer is counted as pending while it is stopped. - the same
applies when rte_timer_reset is called but then the pending
statistics is additionally incremented so the timer is
counted pending twice.
Solution: decrement the pending
statistics after returning from the callback. If
rte_timer_stop was called, it skipped decrementing the
pending statistics. If rte_time_reset was called, the
pending statistics was incremented. If neither was called
and the timer is periodic, the pending statistics is
incremented when it is reloaded
Signed-off-by: Vadim Suraev <vadim.suraev@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Bug: when a periodic timer's callback is running, if another
timer is manipulated, the periodic timer is not reloaded.
Solution: set the update flag only if the modified timer is
in RUNNING state
Signed-off-by: Vadim Suraev <vadim.suraev@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The DPDK dump functions are useful for remote debugging of an
applications. But when application runs as a daemon, stdout
is typically routed to /dev/null.
Instead change all these functions to take a stdio FILE * handle
instead. An application can then use open_memstream() to capture
the output.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
[Thomas: fix quota_watermark example]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
In many application there are no timers queued, and the call to
rte_timer_managecan be optimized in that case avoid reading HPET and
lock overhead.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Reviewed-by: Vincent Jardin <vincent.jardin@6wind.com>
