6cfc6a4f0d
Instead of a hard-coded maximum receive length, allow the bonded interface to inherit this limit from the slave interfaces. This allows an application that uses jumbo frames to pass realistic values to rte_eth_dev_configure without causing an error. Before the bonding interface is configured, allow slaves with any max_rx_pktlen to be added and remember the lowest of these values as a candidate value. During dev_configure, set the bond device's max_rx_pktlen to the candidate value. After this point only slaves with a max_rx_pktlen greater or equal to that of the bonding device can be added. If all slaves are removed, the bond device's pktlen is cleared. Signed-off-by: Eric Kinzie <ehkinzie@gmail.com> Acked-by: Declan Doherty <declan.doherty@intel.com>
861 lines
23 KiB
C
861 lines
23 KiB
C
/*-
|
|
* BSD LICENSE
|
|
*
|
|
* Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* * Neither the name of Intel Corporation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <string.h>
|
|
|
|
#include <rte_mbuf.h>
|
|
#include <rte_malloc.h>
|
|
#include <rte_ethdev.h>
|
|
#include <rte_tcp.h>
|
|
|
|
#include "rte_eth_bond.h"
|
|
#include "rte_eth_bond_private.h"
|
|
#include "rte_eth_bond_8023ad_private.h"
|
|
|
|
#define DEFAULT_POLLING_INTERVAL_10_MS (10)
|
|
|
|
const char pmd_bond_driver_name[] = "rte_bond_pmd";
|
|
|
|
int
|
|
check_for_bonded_ethdev(const struct rte_eth_dev *eth_dev)
|
|
{
|
|
/* Check valid pointer */
|
|
if (eth_dev->data->drv_name == NULL)
|
|
return -1;
|
|
|
|
/* return 0 if driver name matches */
|
|
return eth_dev->data->drv_name != pmd_bond_driver_name;
|
|
}
|
|
|
|
int
|
|
valid_bonded_port_id(uint8_t port_id)
|
|
{
|
|
RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -1);
|
|
return check_for_bonded_ethdev(&rte_eth_devices[port_id]);
|
|
}
|
|
|
|
int
|
|
valid_slave_port_id(uint8_t port_id)
|
|
{
|
|
RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -1);
|
|
|
|
/* Verify that port_id refers to a non bonded port */
|
|
if (check_for_bonded_ethdev(&rte_eth_devices[port_id]) == 0)
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
void
|
|
activate_slave(struct rte_eth_dev *eth_dev, uint8_t port_id)
|
|
{
|
|
struct bond_dev_private *internals = eth_dev->data->dev_private;
|
|
uint8_t active_count = internals->active_slave_count;
|
|
|
|
if (internals->mode == BONDING_MODE_8023AD)
|
|
bond_mode_8023ad_activate_slave(eth_dev, port_id);
|
|
|
|
if (internals->mode == BONDING_MODE_TLB
|
|
|| internals->mode == BONDING_MODE_ALB) {
|
|
|
|
internals->tlb_slaves_order[active_count] = port_id;
|
|
}
|
|
|
|
RTE_ASSERT(internals->active_slave_count <
|
|
(RTE_DIM(internals->active_slaves) - 1));
|
|
|
|
internals->active_slaves[internals->active_slave_count] = port_id;
|
|
internals->active_slave_count++;
|
|
|
|
if (internals->mode == BONDING_MODE_TLB)
|
|
bond_tlb_activate_slave(internals);
|
|
if (internals->mode == BONDING_MODE_ALB)
|
|
bond_mode_alb_client_list_upd(eth_dev);
|
|
}
|
|
|
|
void
|
|
deactivate_slave(struct rte_eth_dev *eth_dev, uint8_t port_id)
|
|
{
|
|
uint8_t slave_pos;
|
|
struct bond_dev_private *internals = eth_dev->data->dev_private;
|
|
uint8_t active_count = internals->active_slave_count;
|
|
|
|
if (internals->mode == BONDING_MODE_8023AD) {
|
|
bond_mode_8023ad_stop(eth_dev);
|
|
bond_mode_8023ad_deactivate_slave(eth_dev, port_id);
|
|
} else if (internals->mode == BONDING_MODE_TLB
|
|
|| internals->mode == BONDING_MODE_ALB)
|
|
bond_tlb_disable(internals);
|
|
|
|
slave_pos = find_slave_by_id(internals->active_slaves, active_count,
|
|
port_id);
|
|
|
|
/* If slave was not at the end of the list
|
|
* shift active slaves up active array list */
|
|
if (slave_pos < active_count) {
|
|
active_count--;
|
|
memmove(internals->active_slaves + slave_pos,
|
|
internals->active_slaves + slave_pos + 1,
|
|
(active_count - slave_pos) *
|
|
sizeof(internals->active_slaves[0]));
|
|
}
|
|
|
|
RTE_ASSERT(active_count < RTE_DIM(internals->active_slaves));
|
|
internals->active_slave_count = active_count;
|
|
|
|
if (eth_dev->data->dev_started) {
|
|
if (internals->mode == BONDING_MODE_8023AD) {
|
|
bond_mode_8023ad_start(eth_dev);
|
|
} else if (internals->mode == BONDING_MODE_TLB) {
|
|
bond_tlb_enable(internals);
|
|
} else if (internals->mode == BONDING_MODE_ALB) {
|
|
bond_tlb_enable(internals);
|
|
bond_mode_alb_client_list_upd(eth_dev);
|
|
}
|
|
}
|
|
}
|
|
|
|
uint8_t
|
|
number_of_sockets(void)
|
|
{
|
|
int sockets = 0;
|
|
int i;
|
|
const struct rte_memseg *ms = rte_eal_get_physmem_layout();
|
|
|
|
for (i = 0; ((i < RTE_MAX_MEMSEG) && (ms[i].addr != NULL)); i++) {
|
|
if (sockets < ms[i].socket_id)
|
|
sockets = ms[i].socket_id;
|
|
}
|
|
|
|
/* Number of sockets = maximum socket_id + 1 */
|
|
return ++sockets;
|
|
}
|
|
|
|
int
|
|
rte_eth_bond_create(const char *name, uint8_t mode, uint8_t socket_id)
|
|
{
|
|
struct bond_dev_private *internals = NULL;
|
|
struct rte_eth_dev *eth_dev = NULL;
|
|
|
|
/* now do all data allocation - for eth_dev structure, dummy pci driver
|
|
* and internal (private) data
|
|
*/
|
|
|
|
if (name == NULL) {
|
|
RTE_BOND_LOG(ERR, "Invalid name specified");
|
|
goto err;
|
|
}
|
|
|
|
if (socket_id >= number_of_sockets()) {
|
|
RTE_BOND_LOG(ERR,
|
|
"Invalid socket id specified to create bonded device on.");
|
|
goto err;
|
|
}
|
|
|
|
internals = rte_zmalloc_socket(name, sizeof(*internals), 0, socket_id);
|
|
if (internals == NULL) {
|
|
RTE_BOND_LOG(ERR, "Unable to malloc internals on socket");
|
|
goto err;
|
|
}
|
|
|
|
/* reserve an ethdev entry */
|
|
eth_dev = rte_eth_dev_allocate(name, RTE_ETH_DEV_VIRTUAL);
|
|
if (eth_dev == NULL) {
|
|
RTE_BOND_LOG(ERR, "Unable to allocate rte_eth_dev");
|
|
goto err;
|
|
}
|
|
|
|
eth_dev->data->dev_private = internals;
|
|
eth_dev->data->nb_rx_queues = (uint16_t)1;
|
|
eth_dev->data->nb_tx_queues = (uint16_t)1;
|
|
|
|
TAILQ_INIT(&(eth_dev->link_intr_cbs));
|
|
|
|
eth_dev->data->dev_link.link_status = ETH_LINK_DOWN;
|
|
|
|
eth_dev->data->mac_addrs = rte_zmalloc_socket(name, ETHER_ADDR_LEN, 0,
|
|
socket_id);
|
|
if (eth_dev->data->mac_addrs == NULL) {
|
|
RTE_BOND_LOG(ERR, "Unable to malloc mac_addrs");
|
|
goto err;
|
|
}
|
|
|
|
eth_dev->data->dev_started = 0;
|
|
eth_dev->data->promiscuous = 0;
|
|
eth_dev->data->scattered_rx = 0;
|
|
eth_dev->data->all_multicast = 0;
|
|
|
|
eth_dev->dev_ops = &default_dev_ops;
|
|
eth_dev->data->dev_flags = RTE_ETH_DEV_INTR_LSC |
|
|
RTE_ETH_DEV_DETACHABLE;
|
|
eth_dev->driver = NULL;
|
|
eth_dev->data->kdrv = RTE_KDRV_NONE;
|
|
eth_dev->data->drv_name = pmd_bond_driver_name;
|
|
eth_dev->data->numa_node = socket_id;
|
|
|
|
rte_spinlock_init(&internals->lock);
|
|
|
|
internals->port_id = eth_dev->data->port_id;
|
|
internals->mode = BONDING_MODE_INVALID;
|
|
internals->current_primary_port = RTE_MAX_ETHPORTS + 1;
|
|
internals->balance_xmit_policy = BALANCE_XMIT_POLICY_LAYER2;
|
|
internals->xmit_hash = xmit_l2_hash;
|
|
internals->user_defined_mac = 0;
|
|
internals->link_props_set = 0;
|
|
|
|
internals->link_status_polling_enabled = 0;
|
|
|
|
internals->link_status_polling_interval_ms = DEFAULT_POLLING_INTERVAL_10_MS;
|
|
internals->link_down_delay_ms = 0;
|
|
internals->link_up_delay_ms = 0;
|
|
|
|
internals->slave_count = 0;
|
|
internals->active_slave_count = 0;
|
|
internals->rx_offload_capa = 0;
|
|
internals->tx_offload_capa = 0;
|
|
internals->candidate_max_rx_pktlen = 0;
|
|
internals->max_rx_pktlen = 0;
|
|
|
|
/* Initially allow to choose any offload type */
|
|
internals->flow_type_rss_offloads = ETH_RSS_PROTO_MASK;
|
|
|
|
memset(internals->active_slaves, 0, sizeof(internals->active_slaves));
|
|
memset(internals->slaves, 0, sizeof(internals->slaves));
|
|
|
|
/* Set mode 4 default configuration */
|
|
bond_mode_8023ad_setup(eth_dev, NULL);
|
|
if (bond_ethdev_mode_set(eth_dev, mode)) {
|
|
RTE_BOND_LOG(ERR, "Failed to set bonded device %d mode too %d",
|
|
eth_dev->data->port_id, mode);
|
|
goto err;
|
|
}
|
|
|
|
return eth_dev->data->port_id;
|
|
|
|
err:
|
|
rte_free(internals);
|
|
if (eth_dev != NULL) {
|
|
rte_free(eth_dev->data->mac_addrs);
|
|
rte_eth_dev_release_port(eth_dev);
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
int
|
|
rte_eth_bond_free(const char *name)
|
|
{
|
|
struct rte_eth_dev *eth_dev = NULL;
|
|
struct bond_dev_private *internals;
|
|
|
|
/* now free all data allocation - for eth_dev structure,
|
|
* dummy pci driver and internal (private) data
|
|
*/
|
|
|
|
/* find an ethdev entry */
|
|
eth_dev = rte_eth_dev_allocated(name);
|
|
if (eth_dev == NULL)
|
|
return -ENODEV;
|
|
|
|
internals = eth_dev->data->dev_private;
|
|
if (internals->slave_count != 0)
|
|
return -EBUSY;
|
|
|
|
if (eth_dev->data->dev_started == 1) {
|
|
bond_ethdev_stop(eth_dev);
|
|
bond_ethdev_close(eth_dev);
|
|
}
|
|
|
|
eth_dev->dev_ops = NULL;
|
|
eth_dev->rx_pkt_burst = NULL;
|
|
eth_dev->tx_pkt_burst = NULL;
|
|
|
|
rte_free(eth_dev->data->dev_private);
|
|
rte_free(eth_dev->data->mac_addrs);
|
|
|
|
rte_eth_dev_release_port(eth_dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
__eth_bond_slave_add_lock_free(uint8_t bonded_port_id, uint8_t slave_port_id)
|
|
{
|
|
struct rte_eth_dev *bonded_eth_dev, *slave_eth_dev;
|
|
struct bond_dev_private *internals;
|
|
struct rte_eth_link link_props;
|
|
struct rte_eth_dev_info dev_info;
|
|
|
|
if (valid_slave_port_id(slave_port_id) != 0)
|
|
return -1;
|
|
|
|
bonded_eth_dev = &rte_eth_devices[bonded_port_id];
|
|
internals = bonded_eth_dev->data->dev_private;
|
|
|
|
slave_eth_dev = &rte_eth_devices[slave_port_id];
|
|
if (slave_eth_dev->data->dev_flags & RTE_ETH_DEV_BONDED_SLAVE) {
|
|
RTE_BOND_LOG(ERR, "Slave device is already a slave of a bonded device");
|
|
return -1;
|
|
}
|
|
|
|
/* Add slave details to bonded device */
|
|
slave_eth_dev->data->dev_flags |= RTE_ETH_DEV_BONDED_SLAVE;
|
|
|
|
rte_eth_dev_info_get(slave_port_id, &dev_info);
|
|
if (dev_info.max_rx_pktlen < internals->max_rx_pktlen) {
|
|
RTE_BOND_LOG(ERR, "Slave (port %u) max_rx_pktlen too small",
|
|
slave_port_id);
|
|
return -1;
|
|
}
|
|
|
|
slave_add(internals, slave_eth_dev);
|
|
|
|
/* We need to store slaves reta_size to be able to synchronize RETA for all
|
|
* slave devices even if its sizes are different.
|
|
*/
|
|
internals->slaves[internals->slave_count].reta_size = dev_info.reta_size;
|
|
|
|
if (internals->slave_count < 1) {
|
|
/* if MAC is not user defined then use MAC of first slave add to
|
|
* bonded device */
|
|
if (!internals->user_defined_mac)
|
|
mac_address_set(bonded_eth_dev, slave_eth_dev->data->mac_addrs);
|
|
|
|
/* Inherit eth dev link properties from first slave */
|
|
link_properties_set(bonded_eth_dev,
|
|
&(slave_eth_dev->data->dev_link));
|
|
|
|
/* Make primary slave */
|
|
internals->primary_port = slave_port_id;
|
|
internals->current_primary_port = slave_port_id;
|
|
|
|
/* Inherit queues settings from first slave */
|
|
internals->nb_rx_queues = slave_eth_dev->data->nb_rx_queues;
|
|
internals->nb_tx_queues = slave_eth_dev->data->nb_tx_queues;
|
|
|
|
internals->reta_size = dev_info.reta_size;
|
|
|
|
/* Take the first dev's offload capabilities */
|
|
internals->rx_offload_capa = dev_info.rx_offload_capa;
|
|
internals->tx_offload_capa = dev_info.tx_offload_capa;
|
|
internals->flow_type_rss_offloads = dev_info.flow_type_rss_offloads;
|
|
|
|
/* Inherit first slave's max rx packet size */
|
|
internals->candidate_max_rx_pktlen = dev_info.max_rx_pktlen;
|
|
|
|
} else {
|
|
/* Check slave link properties are supported if props are set,
|
|
* all slaves must be the same */
|
|
if (internals->link_props_set) {
|
|
if (link_properties_valid(&(bonded_eth_dev->data->dev_link),
|
|
&(slave_eth_dev->data->dev_link))) {
|
|
slave_eth_dev->data->dev_flags &= (~RTE_ETH_DEV_BONDED_SLAVE);
|
|
RTE_BOND_LOG(ERR,
|
|
"Slave port %d link speed/duplex not supported",
|
|
slave_port_id);
|
|
return -1;
|
|
}
|
|
} else {
|
|
link_properties_set(bonded_eth_dev,
|
|
&(slave_eth_dev->data->dev_link));
|
|
}
|
|
internals->rx_offload_capa &= dev_info.rx_offload_capa;
|
|
internals->tx_offload_capa &= dev_info.tx_offload_capa;
|
|
internals->flow_type_rss_offloads &= dev_info.flow_type_rss_offloads;
|
|
|
|
/* RETA size is GCD of all slaves RETA sizes, so, if all sizes will be
|
|
* the power of 2, the lower one is GCD
|
|
*/
|
|
if (internals->reta_size > dev_info.reta_size)
|
|
internals->reta_size = dev_info.reta_size;
|
|
|
|
if (!internals->max_rx_pktlen &&
|
|
dev_info.max_rx_pktlen < internals->candidate_max_rx_pktlen)
|
|
internals->candidate_max_rx_pktlen = dev_info.max_rx_pktlen;
|
|
}
|
|
|
|
bonded_eth_dev->data->dev_conf.rx_adv_conf.rss_conf.rss_hf &=
|
|
internals->flow_type_rss_offloads;
|
|
|
|
internals->slave_count++;
|
|
|
|
/* Update all slave devices MACs*/
|
|
mac_address_slaves_update(bonded_eth_dev);
|
|
|
|
if (bonded_eth_dev->data->dev_started) {
|
|
if (slave_configure(bonded_eth_dev, slave_eth_dev) != 0) {
|
|
slave_eth_dev->data->dev_flags &= (~RTE_ETH_DEV_BONDED_SLAVE);
|
|
RTE_BOND_LOG(ERR, "rte_bond_slaves_configure: port=%d",
|
|
slave_port_id);
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
/* Register link status change callback with bonded device pointer as
|
|
* argument*/
|
|
rte_eth_dev_callback_register(slave_port_id, RTE_ETH_EVENT_INTR_LSC,
|
|
bond_ethdev_lsc_event_callback, &bonded_eth_dev->data->port_id);
|
|
|
|
/* If bonded device is started then we can add the slave to our active
|
|
* slave array */
|
|
if (bonded_eth_dev->data->dev_started) {
|
|
rte_eth_link_get_nowait(slave_port_id, &link_props);
|
|
|
|
if (link_props.link_status == ETH_LINK_UP) {
|
|
if (internals->active_slave_count == 0 &&
|
|
!internals->user_defined_primary_port)
|
|
bond_ethdev_primary_set(internals,
|
|
slave_port_id);
|
|
|
|
if (find_slave_by_id(internals->active_slaves,
|
|
internals->active_slave_count,
|
|
slave_port_id) == internals->active_slave_count)
|
|
activate_slave(bonded_eth_dev, slave_port_id);
|
|
}
|
|
}
|
|
return 0;
|
|
|
|
}
|
|
|
|
int
|
|
rte_eth_bond_slave_add(uint8_t bonded_port_id, uint8_t slave_port_id)
|
|
{
|
|
struct rte_eth_dev *bonded_eth_dev;
|
|
struct bond_dev_private *internals;
|
|
|
|
int retval;
|
|
|
|
/* Verify that port id's are valid bonded and slave ports */
|
|
if (valid_bonded_port_id(bonded_port_id) != 0)
|
|
return -1;
|
|
|
|
bonded_eth_dev = &rte_eth_devices[bonded_port_id];
|
|
internals = bonded_eth_dev->data->dev_private;
|
|
|
|
rte_spinlock_lock(&internals->lock);
|
|
|
|
retval = __eth_bond_slave_add_lock_free(bonded_port_id, slave_port_id);
|
|
|
|
rte_spinlock_unlock(&internals->lock);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int
|
|
__eth_bond_slave_remove_lock_free(uint8_t bonded_port_id, uint8_t slave_port_id)
|
|
{
|
|
struct rte_eth_dev *bonded_eth_dev;
|
|
struct bond_dev_private *internals;
|
|
struct rte_eth_dev *slave_eth_dev;
|
|
int i, slave_idx;
|
|
|
|
if (valid_slave_port_id(slave_port_id) != 0)
|
|
return -1;
|
|
|
|
bonded_eth_dev = &rte_eth_devices[bonded_port_id];
|
|
internals = bonded_eth_dev->data->dev_private;
|
|
|
|
/* first remove from active slave list */
|
|
slave_idx = find_slave_by_id(internals->active_slaves,
|
|
internals->active_slave_count, slave_port_id);
|
|
|
|
if (slave_idx < internals->active_slave_count)
|
|
deactivate_slave(bonded_eth_dev, slave_port_id);
|
|
|
|
slave_idx = -1;
|
|
/* now find in slave list */
|
|
for (i = 0; i < internals->slave_count; i++)
|
|
if (internals->slaves[i].port_id == slave_port_id) {
|
|
slave_idx = i;
|
|
break;
|
|
}
|
|
|
|
if (slave_idx < 0) {
|
|
RTE_BOND_LOG(ERR, "Couldn't find slave in port list, slave count %d",
|
|
internals->slave_count);
|
|
return -1;
|
|
}
|
|
|
|
/* Un-register link status change callback with bonded device pointer as
|
|
* argument*/
|
|
rte_eth_dev_callback_unregister(slave_port_id, RTE_ETH_EVENT_INTR_LSC,
|
|
bond_ethdev_lsc_event_callback,
|
|
&rte_eth_devices[bonded_port_id].data->port_id);
|
|
|
|
/* Restore original MAC address of slave device */
|
|
mac_address_set(&rte_eth_devices[slave_port_id],
|
|
&(internals->slaves[slave_idx].persisted_mac_addr));
|
|
|
|
slave_eth_dev = &rte_eth_devices[slave_port_id];
|
|
slave_remove(internals, slave_eth_dev);
|
|
slave_eth_dev->data->dev_flags &= (~RTE_ETH_DEV_BONDED_SLAVE);
|
|
|
|
/* first slave in the active list will be the primary by default,
|
|
* otherwise use first device in list */
|
|
if (internals->current_primary_port == slave_port_id) {
|
|
if (internals->active_slave_count > 0)
|
|
internals->current_primary_port = internals->active_slaves[0];
|
|
else if (internals->slave_count > 0)
|
|
internals->current_primary_port = internals->slaves[0].port_id;
|
|
else
|
|
internals->primary_port = 0;
|
|
}
|
|
|
|
if (internals->active_slave_count < 1) {
|
|
/* reset device link properties as no slaves are active */
|
|
link_properties_reset(&rte_eth_devices[bonded_port_id]);
|
|
|
|
/* if no slaves are any longer attached to bonded device and MAC is not
|
|
* user defined then clear MAC of bonded device as it will be reset
|
|
* when a new slave is added */
|
|
if (internals->slave_count < 1 && !internals->user_defined_mac)
|
|
memset(rte_eth_devices[bonded_port_id].data->mac_addrs, 0,
|
|
sizeof(*(rte_eth_devices[bonded_port_id].data->mac_addrs)));
|
|
}
|
|
if (internals->slave_count == 0) {
|
|
internals->rx_offload_capa = 0;
|
|
internals->tx_offload_capa = 0;
|
|
internals->flow_type_rss_offloads = ETH_RSS_PROTO_MASK;
|
|
internals->reta_size = 0;
|
|
internals->candidate_max_rx_pktlen = 0;
|
|
internals->max_rx_pktlen = 0;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
rte_eth_bond_slave_remove(uint8_t bonded_port_id, uint8_t slave_port_id)
|
|
{
|
|
struct rte_eth_dev *bonded_eth_dev;
|
|
struct bond_dev_private *internals;
|
|
int retval;
|
|
|
|
if (valid_bonded_port_id(bonded_port_id) != 0)
|
|
return -1;
|
|
|
|
bonded_eth_dev = &rte_eth_devices[bonded_port_id];
|
|
internals = bonded_eth_dev->data->dev_private;
|
|
|
|
rte_spinlock_lock(&internals->lock);
|
|
|
|
retval = __eth_bond_slave_remove_lock_free(bonded_port_id, slave_port_id);
|
|
|
|
rte_spinlock_unlock(&internals->lock);
|
|
|
|
return retval;
|
|
}
|
|
|
|
int
|
|
rte_eth_bond_mode_set(uint8_t bonded_port_id, uint8_t mode)
|
|
{
|
|
if (valid_bonded_port_id(bonded_port_id) != 0)
|
|
return -1;
|
|
|
|
return bond_ethdev_mode_set(&rte_eth_devices[bonded_port_id], mode);
|
|
}
|
|
|
|
int
|
|
rte_eth_bond_mode_get(uint8_t bonded_port_id)
|
|
{
|
|
struct bond_dev_private *internals;
|
|
|
|
if (valid_bonded_port_id(bonded_port_id) != 0)
|
|
return -1;
|
|
|
|
internals = rte_eth_devices[bonded_port_id].data->dev_private;
|
|
|
|
return internals->mode;
|
|
}
|
|
|
|
int
|
|
rte_eth_bond_primary_set(uint8_t bonded_port_id, uint8_t slave_port_id)
|
|
{
|
|
struct bond_dev_private *internals;
|
|
|
|
if (valid_bonded_port_id(bonded_port_id) != 0)
|
|
return -1;
|
|
|
|
if (valid_slave_port_id(slave_port_id) != 0)
|
|
return -1;
|
|
|
|
internals = rte_eth_devices[bonded_port_id].data->dev_private;
|
|
|
|
internals->user_defined_primary_port = 1;
|
|
internals->primary_port = slave_port_id;
|
|
|
|
bond_ethdev_primary_set(internals, slave_port_id);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
rte_eth_bond_primary_get(uint8_t bonded_port_id)
|
|
{
|
|
struct bond_dev_private *internals;
|
|
|
|
if (valid_bonded_port_id(bonded_port_id) != 0)
|
|
return -1;
|
|
|
|
internals = rte_eth_devices[bonded_port_id].data->dev_private;
|
|
|
|
if (internals->slave_count < 1)
|
|
return -1;
|
|
|
|
return internals->current_primary_port;
|
|
}
|
|
|
|
int
|
|
rte_eth_bond_slaves_get(uint8_t bonded_port_id, uint8_t slaves[], uint8_t len)
|
|
{
|
|
struct bond_dev_private *internals;
|
|
uint8_t i;
|
|
|
|
if (valid_bonded_port_id(bonded_port_id) != 0)
|
|
return -1;
|
|
|
|
if (slaves == NULL)
|
|
return -1;
|
|
|
|
internals = rte_eth_devices[bonded_port_id].data->dev_private;
|
|
|
|
if (internals->slave_count > len)
|
|
return -1;
|
|
|
|
for (i = 0; i < internals->slave_count; i++)
|
|
slaves[i] = internals->slaves[i].port_id;
|
|
|
|
return internals->slave_count;
|
|
}
|
|
|
|
int
|
|
rte_eth_bond_active_slaves_get(uint8_t bonded_port_id, uint8_t slaves[],
|
|
uint8_t len)
|
|
{
|
|
struct bond_dev_private *internals;
|
|
|
|
if (valid_bonded_port_id(bonded_port_id) != 0)
|
|
return -1;
|
|
|
|
if (slaves == NULL)
|
|
return -1;
|
|
|
|
internals = rte_eth_devices[bonded_port_id].data->dev_private;
|
|
|
|
if (internals->active_slave_count > len)
|
|
return -1;
|
|
|
|
memcpy(slaves, internals->active_slaves, internals->active_slave_count);
|
|
|
|
return internals->active_slave_count;
|
|
}
|
|
|
|
int
|
|
rte_eth_bond_mac_address_set(uint8_t bonded_port_id,
|
|
struct ether_addr *mac_addr)
|
|
{
|
|
struct rte_eth_dev *bonded_eth_dev;
|
|
struct bond_dev_private *internals;
|
|
|
|
if (valid_bonded_port_id(bonded_port_id) != 0)
|
|
return -1;
|
|
|
|
bonded_eth_dev = &rte_eth_devices[bonded_port_id];
|
|
internals = bonded_eth_dev->data->dev_private;
|
|
|
|
/* Set MAC Address of Bonded Device */
|
|
if (mac_address_set(bonded_eth_dev, mac_addr))
|
|
return -1;
|
|
|
|
internals->user_defined_mac = 1;
|
|
|
|
/* Update all slave devices MACs*/
|
|
if (internals->slave_count > 0)
|
|
return mac_address_slaves_update(bonded_eth_dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
rte_eth_bond_mac_address_reset(uint8_t bonded_port_id)
|
|
{
|
|
struct rte_eth_dev *bonded_eth_dev;
|
|
struct bond_dev_private *internals;
|
|
|
|
if (valid_bonded_port_id(bonded_port_id) != 0)
|
|
return -1;
|
|
|
|
bonded_eth_dev = &rte_eth_devices[bonded_port_id];
|
|
internals = bonded_eth_dev->data->dev_private;
|
|
|
|
internals->user_defined_mac = 0;
|
|
|
|
if (internals->slave_count > 0) {
|
|
/* Set MAC Address of Bonded Device */
|
|
if (mac_address_set(bonded_eth_dev,
|
|
&internals->slaves[internals->primary_port].persisted_mac_addr)
|
|
!= 0) {
|
|
RTE_BOND_LOG(ERR, "Failed to set MAC address on bonded device");
|
|
return -1;
|
|
}
|
|
/* Update all slave devices MAC addresses */
|
|
return mac_address_slaves_update(bonded_eth_dev);
|
|
}
|
|
/* No need to update anything as no slaves present */
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
rte_eth_bond_xmit_policy_set(uint8_t bonded_port_id, uint8_t policy)
|
|
{
|
|
struct bond_dev_private *internals;
|
|
|
|
if (valid_bonded_port_id(bonded_port_id) != 0)
|
|
return -1;
|
|
|
|
internals = rte_eth_devices[bonded_port_id].data->dev_private;
|
|
|
|
switch (policy) {
|
|
case BALANCE_XMIT_POLICY_LAYER2:
|
|
internals->balance_xmit_policy = policy;
|
|
internals->xmit_hash = xmit_l2_hash;
|
|
break;
|
|
case BALANCE_XMIT_POLICY_LAYER23:
|
|
internals->balance_xmit_policy = policy;
|
|
internals->xmit_hash = xmit_l23_hash;
|
|
break;
|
|
case BALANCE_XMIT_POLICY_LAYER34:
|
|
internals->balance_xmit_policy = policy;
|
|
internals->xmit_hash = xmit_l34_hash;
|
|
break;
|
|
|
|
default:
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
rte_eth_bond_xmit_policy_get(uint8_t bonded_port_id)
|
|
{
|
|
struct bond_dev_private *internals;
|
|
|
|
if (valid_bonded_port_id(bonded_port_id) != 0)
|
|
return -1;
|
|
|
|
internals = rte_eth_devices[bonded_port_id].data->dev_private;
|
|
|
|
return internals->balance_xmit_policy;
|
|
}
|
|
|
|
int
|
|
rte_eth_bond_link_monitoring_set(uint8_t bonded_port_id, uint32_t internal_ms)
|
|
{
|
|
struct bond_dev_private *internals;
|
|
|
|
if (valid_bonded_port_id(bonded_port_id) != 0)
|
|
return -1;
|
|
|
|
internals = rte_eth_devices[bonded_port_id].data->dev_private;
|
|
internals->link_status_polling_interval_ms = internal_ms;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
rte_eth_bond_link_monitoring_get(uint8_t bonded_port_id)
|
|
{
|
|
struct bond_dev_private *internals;
|
|
|
|
if (valid_bonded_port_id(bonded_port_id) != 0)
|
|
return -1;
|
|
|
|
internals = rte_eth_devices[bonded_port_id].data->dev_private;
|
|
|
|
return internals->link_status_polling_interval_ms;
|
|
}
|
|
|
|
int
|
|
rte_eth_bond_link_down_prop_delay_set(uint8_t bonded_port_id, uint32_t delay_ms)
|
|
|
|
{
|
|
struct bond_dev_private *internals;
|
|
|
|
if (valid_bonded_port_id(bonded_port_id) != 0)
|
|
return -1;
|
|
|
|
internals = rte_eth_devices[bonded_port_id].data->dev_private;
|
|
internals->link_down_delay_ms = delay_ms;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
rte_eth_bond_link_down_prop_delay_get(uint8_t bonded_port_id)
|
|
{
|
|
struct bond_dev_private *internals;
|
|
|
|
if (valid_bonded_port_id(bonded_port_id) != 0)
|
|
return -1;
|
|
|
|
internals = rte_eth_devices[bonded_port_id].data->dev_private;
|
|
|
|
return internals->link_down_delay_ms;
|
|
}
|
|
|
|
int
|
|
rte_eth_bond_link_up_prop_delay_set(uint8_t bonded_port_id, uint32_t delay_ms)
|
|
|
|
{
|
|
struct bond_dev_private *internals;
|
|
|
|
if (valid_bonded_port_id(bonded_port_id) != 0)
|
|
return -1;
|
|
|
|
internals = rte_eth_devices[bonded_port_id].data->dev_private;
|
|
internals->link_up_delay_ms = delay_ms;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
rte_eth_bond_link_up_prop_delay_get(uint8_t bonded_port_id)
|
|
{
|
|
struct bond_dev_private *internals;
|
|
|
|
if (valid_bonded_port_id(bonded_port_id) != 0)
|
|
return -1;
|
|
|
|
internals = rte_eth_devices[bonded_port_id].data->dev_private;
|
|
|
|
return internals->link_up_delay_ms;
|
|
}
|