numam-dpdk/drivers/net/ixgbe/rte_pmd_ixgbe.h
Ferruh Yigit 1d7f076c1c net/ixgbe: fix API comments for doxygen
Fixes: 57aa1fd284 ("net/ixgbe: move set VF functions from the ethdev")

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
2017-01-30 22:18:26 +01:00

413 lines
12 KiB
C

/*-
* BSD LICENSE
*
* Copyright (c) 2016 Intel Corporation. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* @file rte_pmd_ixgbe.h
* ixgbe PMD specific functions.
*
**/
#ifndef _PMD_IXGBE_H_
#define _PMD_IXGBE_H_
#include <rte_ethdev.h>
/**
* Set the VF MAC address.
*
* @param port
* The port identifier of the Ethernet device.
* @param vf
* VF id.
* @param mac_addr
* VF MAC address.
* @return
* - (0) if successful.
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if *vf* or *mac_addr* is invalid.
*/
int rte_pmd_ixgbe_set_vf_mac_addr(uint8_t port, uint16_t vf,
struct ether_addr *mac_addr);
/**
* Enable/Disable VF VLAN anti spoofing.
*
* @param port
* The port identifier of the Ethernet device.
* @param vf
* VF on which to set VLAN anti spoofing.
* @param on
* 1 - Enable VFs VLAN anti spoofing.
* 0 - Disable VFs VLAN anti spoofing.
* @return
* - (0) if successful.
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
int rte_pmd_ixgbe_set_vf_vlan_anti_spoof(uint8_t port, uint16_t vf, uint8_t on);
/**
* Enable/Disable VF MAC anti spoofing.
*
* @param port
* The port identifier of the Ethernet device.
* @param vf
* VF on which to set MAC anti spoofing.
* @param on
* 1 - Enable VFs MAC anti spoofing.
* 0 - Disable VFs MAC anti spoofing.
* @return
* - (0) if successful.
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
int rte_pmd_ixgbe_set_vf_mac_anti_spoof(uint8_t port, uint16_t vf, uint8_t on);
/**
* Enable/Disable vf vlan insert
*
* @param port
* The port identifier of the Ethernet device.
* @param vf
* ID specifying VF.
* @param vlan_id
* 0 - Disable VF's vlan insert.
* n - Enable; n is inserted as the vlan id.
*
* @return
* - (0) if successful.
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
int rte_pmd_ixgbe_set_vf_vlan_insert(uint8_t port, uint16_t vf,
uint16_t vlan_id);
/**
* Enable/Disable tx loopback
*
* @param port
* The port identifier of the Ethernet device.
* @param on
* 1 - Enable tx loopback.
* 0 - Disable tx loopback.
*
* @return
* - (0) if successful.
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
int rte_pmd_ixgbe_set_tx_loopback(uint8_t port, uint8_t on);
/**
* set all queues drop enable bit
*
* @param port
* The port identifier of the Ethernet device.
* @param on
* 1 - set the queue drop enable bit for all pools.
* 0 - reset the queue drop enable bit for all pools.
*
* @return
* - (0) if successful.
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
int rte_pmd_ixgbe_set_all_queues_drop_en(uint8_t port, uint8_t on);
/**
* set drop enable bit in the VF split rx control register
*
* @param port
* The port identifier of the Ethernet device.
* @param vf
* ID specifying VF.
* @param on
* 1 - set the drop enable bit in the split rx control register.
* 0 - reset the drop enable bit in the split rx control register.
*
* @return
* - (0) if successful.
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
int rte_pmd_ixgbe_set_vf_split_drop_en(uint8_t port, uint16_t vf, uint8_t on);
/**
* Enable/Disable vf vlan strip for all queues in a pool
*
* @param port
* The port identifier of the Ethernet device.
* @param vf
* ID specifying VF.
* @param on
* 1 - Enable VF's vlan strip on RX queues.
* 0 - Disable VF's vlan strip on RX queues.
*
* @return
* - (0) if successful.
* - (-ENOTSUP) if hardware doesn't support this feature.
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
int
rte_pmd_ixgbe_set_vf_vlan_stripq(uint8_t port, uint16_t vf, uint8_t on);
/**
* Enable MACsec offload.
*
* @param port
* The port identifier of the Ethernet device.
* @param en
* 1 - Enable encryption (encrypt and add integrity signature).
* 0 - Disable encryption (only add integrity signature).
* @param rp
* 1 - Enable replay protection.
* 0 - Disable replay protection.
* @return
* - (0) if successful.
* - (-ENODEV) if *port* invalid.
* - (-ENOTSUP) if hardware doesn't support this feature.
*/
int rte_pmd_ixgbe_macsec_enable(uint8_t port, uint8_t en, uint8_t rp);
/**
* Disable MACsec offload.
*
* @param port
* The port identifier of the Ethernet device.
* @return
* - (0) if successful.
* - (-ENODEV) if *port* invalid.
* - (-ENOTSUP) if hardware doesn't support this feature.
*/
int rte_pmd_ixgbe_macsec_disable(uint8_t port);
/**
* Configure Tx SC (Secure Connection).
*
* @param port
* The port identifier of the Ethernet device.
* @param mac
* The MAC address on the local side.
* @return
* - (0) if successful.
* - (-ENODEV) if *port* invalid.
* - (-ENOTSUP) if hardware doesn't support this feature.
*/
int rte_pmd_ixgbe_macsec_config_txsc(uint8_t port, uint8_t *mac);
/**
* Configure Rx SC (Secure Connection).
*
* @param port
* The port identifier of the Ethernet device.
* @param mac
* The MAC address on the remote side.
* @param pi
* The PI (port identifier) on the remote side.
* @return
* - (0) if successful.
* - (-ENODEV) if *port* invalid.
* - (-ENOTSUP) if hardware doesn't support this feature.
*/
int rte_pmd_ixgbe_macsec_config_rxsc(uint8_t port, uint8_t *mac, uint16_t pi);
/**
* Enable Tx SA (Secure Association).
*
* @param port
* The port identifier of the Ethernet device.
* @param idx
* The SA to be enabled (0 or 1).
* @param an
* The association number on the local side.
* @param pn
* The packet number on the local side.
* @param key
* The key on the local side.
* @return
* - (0) if successful.
* - (-ENODEV) if *port* invalid.
* - (-ENOTSUP) if hardware doesn't support this feature.
* - (-EINVAL) if bad parameter.
*/
int rte_pmd_ixgbe_macsec_select_txsa(uint8_t port, uint8_t idx, uint8_t an,
uint32_t pn, uint8_t *key);
/**
* Enable Rx SA (Secure Association).
*
* @param port
* The port identifier of the Ethernet device.
* @param idx
* The SA to be enabled (0 or 1)
* @param an
* The association number on the remote side.
* @param pn
* The packet number on the remote side.
* @param key
* The key on the remote side.
* @return
* - (0) if successful.
* - (-ENODEV) if *port* invalid.
* - (-ENOTSUP) if hardware doesn't support this feature.
* - (-EINVAL) if bad parameter.
*/
int rte_pmd_ixgbe_macsec_select_rxsa(uint8_t port, uint8_t idx, uint8_t an,
uint32_t pn, uint8_t *key);
/**
* Set RX L2 Filtering mode of a VF of an Ethernet device.
*
* @param port
* The port identifier of the Ethernet device.
* @param vf
* VF id.
* @param rx_mask
* The RX mode mask, which is one or more of accepting Untagged Packets,
* packets that match the PFUTA table, Broadcast and Multicast Promiscuous.
* ETH_VMDQ_ACCEPT_UNTAG,ETH_VMDQ_ACCEPT_HASH_UC,
* ETH_VMDQ_ACCEPT_BROADCAST and ETH_VMDQ_ACCEPT_MULTICAST will be used
* in rx_mode.
* @param on
* 1 - Enable a VF RX mode.
* 0 - Disable a VF RX mode.
* @return
* - (0) if successful.
* - (-ENOTSUP) if hardware doesn't support.
* - (-ENODEV) if *port_id* invalid.
* - (-EINVAL) if bad parameter.
*/
int
rte_pmd_ixgbe_set_vf_rxmode(uint8_t port, uint16_t vf, uint16_t rx_mask, uint8_t on);
/**
* Enable or disable a VF traffic receive of an Ethernet device.
*
* @param port
* The port identifier of the Ethernet device.
* @param vf
* VF id.
* @param on
* 1 - Enable a VF traffic receive.
* 0 - Disable a VF traffic receive.
* @return
* - (0) if successful.
* - (-ENOTSUP) if hardware doesn't support.
* - (-ENODEV) if *port_id* invalid.
* - (-EINVAL) if bad parameter.
*/
int
rte_pmd_ixgbe_set_vf_rx(uint8_t port, uint16_t vf, uint8_t on);
/**
* Enable or disable a VF traffic transmit of the Ethernet device.
*
* @param port
* The port identifier of the Ethernet device.
* @param vf
* VF id.
* @param on
* 1 - Enable a VF traffic transmit.
* 0 - Disable a VF traffic transmit.
* @return
* - (0) if successful.
* - (-ENODEV) if *port_id* invalid.
* - (-ENOTSUP) if hardware doesn't support.
* - (-EINVAL) if bad parameter.
*/
int
rte_pmd_ixgbe_set_vf_tx(uint8_t port, uint16_t vf, uint8_t on);
/**
* Enable/Disable hardware VF VLAN filtering by an Ethernet device of
* received VLAN packets tagged with a given VLAN Tag Identifier.
*
* @param port
* The port identifier of the Ethernet device.
* @param vlan
* The VLAN Tag Identifier whose filtering must be enabled or disabled.
* @param vf_mask
* Bitmap listing which VFs participate in the VLAN filtering.
* @param vlan_on
* 1 - Enable VFs VLAN filtering.
* 0 - Disable VFs VLAN filtering.
* @return
* - (0) if successful.
* - (-ENOTSUP) if hardware doesn't support.
* - (-ENODEV) if *port_id* invalid.
* - (-EINVAL) if bad parameter.
*/
int
rte_pmd_ixgbe_set_vf_vlan_filter(uint8_t port, uint16_t vlan, uint64_t vf_mask, uint8_t vlan_on);
/**
* Set the rate limitation for a vf on an Ethernet device.
*
* @param port
* The port identifier of the Ethernet device.
* @param vf
* VF id.
* @param tx_rate
* The tx rate allocated from the total link speed for this VF id.
* @param q_msk
* The queue mask which need to set the rate.
* @return
* - (0) if successful.
* - (-ENOTSUP) if hardware doesn't support this feature.
* - (-ENODEV) if *port_id* invalid.
* - (-EINVAL) if bad parameter.
*/
int rte_pmd_ixgbe_set_vf_rate_limit(uint8_t port, uint16_t vf, uint16_t tx_rate, uint64_t q_msk);
/**
* Response sent back to ixgbe driver from user app after callback
*/
enum rte_pmd_ixgbe_mb_event_rsp {
RTE_PMD_IXGBE_MB_EVENT_NOOP_ACK, /**< skip mbox request and ACK */
RTE_PMD_IXGBE_MB_EVENT_NOOP_NACK, /**< skip mbox request and NACK */
RTE_PMD_IXGBE_MB_EVENT_PROCEED, /**< proceed with mbox request */
RTE_PMD_IXGBE_MB_EVENT_MAX /**< max value of this enum */
};
/**
* Data sent to the user application when the callback is executed.
*/
struct rte_pmd_ixgbe_mb_event_param {
uint16_t vfid; /**< Virtual Function number */
uint16_t msg_type; /**< VF to PF message type, defined in ixgbe_mbx.h */
uint16_t retval; /**< return value */
void *msg; /**< pointer to message */
};
#endif /* _PMD_IXGBE_H_ */