d/numam-spdk
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
873c8748eb
numam-spdk/dpdkbuild/Makefile

161 lines
4.6 KiB
Makefile
Raw Normal View History

build: add dpdk as a submodule This will allow a git clone to default to an SPDK-specific version of the DPDK repository. Users can still override to use a separate DPDK repository/installation with the --with-dpdk configure script options. While here, remove gzip option for the git-archive operations in autopackage.sh. We need to add a git-archive for the DPDK submodule if we are using it, and compressing at -9 adds a lot of unnecessary time. Since we are not archiving these packages, there is no need to compress them. Also explicitly disable coverage and ubsan for the autopackage build, since this build is only to test compilation and is not actually used for any test execution. Signed-off-by: Jim Harris <james.r.harris@intel.com> Change-Id: I3cf8a2ed984003a175cdece6542636ede8cb2479
2017-05-08 22:07:13 +00:00
#
# BSD LICENSE
#
# Copyright (c) Intel Corporation.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# * Neither the name of Intel Corporation nor the names of its
# contributors may be used to endorse or promote products derived
# from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
SPDK_ROOT_DIR := $(abspath $(CURDIR)/..)
include $(SPDK_ROOT_DIR)/mk/spdk.common.mk
Makefile: Add possibility to uninstall spdk. Add uninstall target to makefiles to be able to perform reverse of install target. Fixes #464 This patch adds 'uninstall' target to makefile. 'make uninstall' will remove spdk_tgt app, headers, libraries and shared libraries from system directories defined by $DESTDIR. Additionaly, if there will be any empty directories left after this operation, they will be removed as well. Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com> Change-Id: I7b07fb4b81081d3914ff09165991fbe3a26b9067 Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com> Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/431471 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com>
2019-01-02 09:28:02 +00:00
.PHONY: all clean install uninstall
build: add dpdk as a submodule This will allow a git clone to default to an SPDK-specific version of the DPDK repository. Users can still override to use a separate DPDK repository/installation with the --with-dpdk configure script options. While here, remove gzip option for the git-archive operations in autopackage.sh. We need to add a git-archive for the DPDK submodule if we are using it, and compressing at -9 adds a lot of unnecessary time. Since we are not archiving these packages, there is no need to compress them. Also explicitly disable coverage and ubsan for the autopackage build, since this build is only to test compilation and is not actually used for any test execution. Signed-off-by: Jim Harris <james.r.harris@intel.com> Change-Id: I3cf8a2ed984003a175cdece6542636ede8cb2479
2017-05-08 22:07:13 +00:00
dpdk: build and link QAT for both crypto and compression In prep for full QAT compression support later in this patch series. dpdkbuild/Makefile slightly refactored for readability, x86 crypto check removed as it pre-dated checks we now have in configure. Signed-off-by: paul luse <paul.e.luse@intel.com> Change-Id: Iaaaf51b9eb5e18840f47d2d4f431c5a6e8c420ee Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456408 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
2019-05-31 01:04:26 +00:00
DPDK_FRAMEWORK = n
ipsec_mb: use EXTRA_CFLAGS to point DPDK to intel-ipsec-mb submodule This allows us to remove the requirement to install intel-ipsec-mb to system directories. Signed-off-by: Jim Harris <james.r.harris@intel.com> Change-Id: I579655a98b515cf148b7cd17823a9bb541ea6ad7 Reviewed-on: https://review.gerrithub.io/c/440785 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Seth Howell <seth.howell5141@gmail.com> Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com>
2019-01-13 20:28:21 +00:00
DPDK_OPTS =
DPDK_CFLAGS =
Enable DPDK shared object build with SPDK shared object build. When building SPDK with shared objects, we should also build the DPDK submodule shared libraries. This will make it much easier for peole to link their applications against a dpdk shared library if the DPDK shared libraries installed on their system don't have all the symbols that SPDK needs. Also, add a linker argument to DPDK to specify that it should look in the dpdk subdirectory when linking libraries. Note: this change will not work until the default config options in the DPDK submodule are updated. Change-Id: I9546df7b84952eb20fe1ac98e3b3bbd0fcbda3a7 Signed-off-by: Seth Howell <seth.howell@intel.com> Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463028 Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com> Reviewed-by: Jan Kryl <jan.kryl@mayadata.io> Reviewed-by: Ben Walker <benjamin.walker@intel.com> Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
2019-07-24 02:09:21 +00:00
ifeq ($(CONFIG_SHARED),y)
DPDK_OPTS += CONFIG_RTE_BUILD_SHARED_LIB=y
DPDK_LDFLAGS+= -rpath $(SPDK_ROOT_DIR)/dpdk/build/lib
else
dpdkbuild: fix CONFIG_RTE_BUILD_SHARED_LIB We commented out this build option in our DPDK fork, but DPDK makefiles check its value specifically against 'n' to set linking flags properly. It's currently unset, so it fails both == 'n' and == 'y' checks, which fails the build. Shared lib build has some issues on FreeBSD right now, so to fix the immediate problem, just define the shared lib option to 'n' for now. This matches the original behavior. We've always built DPDK as a static library. Change-Id: I5a880b777153cc169c3a135d412aa2014f4de8e0 Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com> Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463290 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Paul Luse <paul.e.luse@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com>
2019-07-26 08:59:39 +00:00
DPDK_OPTS += CONFIG_RTE_BUILD_SHARED_LIB=n
Enable DPDK shared object build with SPDK shared object build. When building SPDK with shared objects, we should also build the DPDK submodule shared libraries. This will make it much easier for peole to link their applications against a dpdk shared library if the DPDK shared libraries installed on their system don't have all the symbols that SPDK needs. Also, add a linker argument to DPDK to specify that it should look in the dpdk subdirectory when linking libraries. Note: this change will not work until the default config options in the DPDK submodule are updated. Change-Id: I9546df7b84952eb20fe1ac98e3b3bbd0fcbda3a7 Signed-off-by: Seth Howell <seth.howell@intel.com> Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463028 Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com> Reviewed-by: Jan Kryl <jan.kryl@mayadata.io> Reviewed-by: Ben Walker <benjamin.walker@intel.com> Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
2019-07-24 02:09:21 +00:00
endif
dpdkbuild: fix CONFIG_RTE_BUILD_SHARED_LIB We commented out this build option in our DPDK fork, but DPDK makefiles check its value specifically against 'n' to set linking flags properly. It's currently unset, so it fails both == 'n' and == 'y' checks, which fails the build. Shared lib build has some issues on FreeBSD right now, so to fix the immediate problem, just define the shared lib option to 'n' for now. This matches the original behavior. We've always built DPDK as a static library. Change-Id: I5a880b777153cc169c3a135d412aa2014f4de8e0 Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com> Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463290 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Paul Luse <paul.e.luse@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com>
2019-07-26 08:59:39 +00:00
dpdkbuild: build igb_uio independent of crypto This driver has more generic use cases than just for the crypto driver. See github issues 594 and 210. Change-Id: I7adcb058418a9b56ffa150366584b22b38eb8398 Signed-off-by: Seth Howell <seth.howell@intel.com> Reviewed-on: https://review.gerrithub.io/c/444123 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com> Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com>
2019-02-11 20:24:42 +00:00
ifeq ($(CONFIG_CRYPTO),y)
dpdk: build and link QAT for both crypto and compression In prep for full QAT compression support later in this patch series. dpdkbuild/Makefile slightly refactored for readability, x86 crypto check removed as it pre-dated checks we now have in configure. Signed-off-by: paul luse <paul.e.luse@intel.com> Change-Id: Iaaaf51b9eb5e18840f47d2d4f431c5a6e8c420ee Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456408 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
2019-05-31 01:04:26 +00:00
DPDK_FRAMEWORK = y
build: add intel-ipsec-mb submodule This is a dependency of the DPDK crypto framework. The submodule is currently set to our SPDK fork of the ipsec library which is based off of the library v0.48 tag, as required by DPDK plus one minor Makefile change on the 'spdk' branch of the fork. Also added is a configure option '--with-crypto' and the associated conditionals for building DPDK with or without the library dependency. The crypto vbdev patch will use this same configure option to determine DPDK opts as well as whether the crypto vbdev should be built or not. Change-Id: Ib1cfd15b63b29acf3c2f7345d0d7edfd94716620 Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com> Signed-off-by: paul luse <paul.e.luse@intel.com> Reviewed-on: https://review.gerrithub.io/404983 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com> Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com> Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
2018-03-22 23:24:14 +00:00
DPDK_OPTS += CONFIG_RTE_LIBRTE_PMD_AESNI_MB=y
dpdk: build and link QAT for both crypto and compression In prep for full QAT compression support later in this patch series. dpdkbuild/Makefile slightly refactored for readability, x86 crypto check removed as it pre-dated checks we now have in configure. Signed-off-by: paul luse <paul.e.luse@intel.com> Change-Id: Iaaaf51b9eb5e18840f47d2d4f431c5a6e8c420ee Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456408 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
2019-05-31 01:04:26 +00:00
DPDK_OPTS += CONFIG_RTE_LIBRTE_REORDER=y
ipsec_mb: use EXTRA_CFLAGS to point DPDK to intel-ipsec-mb submodule This allows us to remove the requirement to install intel-ipsec-mb to system directories. Signed-off-by: Jim Harris <james.r.harris@intel.com> Change-Id: I579655a98b515cf148b7cd17823a9bb541ea6ad7 Reviewed-on: https://review.gerrithub.io/c/440785 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Seth Howell <seth.howell5141@gmail.com> Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com>
2019-01-13 20:28:21 +00:00
DPDK_CFLAGS += -I$(IPSEC_MB_DIR)
dpdkbuild: specify ldflags In DPDK 19.05 there's a new test app which we obviously don't need to build, but we have no way not to, as it's built together with a library that we do need. That app may try to link with crypto and compress PMDs, which require IPSec and ISA-L respectively. If those were not installed on the system, the linking would fail. We fix it by providing DPDK with extra -L/path/to/[...] Change-Id: I652efb669d10d2d03d0f643ce539404c1f0e38c4 Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com> Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455825 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
2019-05-27 12:03:51 +00:00
DPDK_LDFLAGS += -L$(IPSEC_MB_DIR)
make: build the igb_uio kernel module with crypto Also, update the qat_setup script to point to this module. Dependent upon:https://review.gerrithub.io/c/spdk/dpdk/+/428718 Change-Id: Ie8694a1996621165f52a513d9b19c7232aaed9ce Signed-off-by: Seth Howell <seth.howell@intel.com> Reviewed-on: https://review.gerrithub.io/428719 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com> Reviewed-by: Changpeng Liu <changpeng.liu@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com>
2018-10-10 17:09:07 +00:00
else
build: add intel-ipsec-mb submodule This is a dependency of the DPDK crypto framework. The submodule is currently set to our SPDK fork of the ipsec library which is based off of the library v0.48 tag, as required by DPDK plus one minor Makefile change on the 'spdk' branch of the fork. Also added is a configure option '--with-crypto' and the associated conditionals for building DPDK with or without the library dependency. The crypto vbdev patch will use this same configure option to determine DPDK opts as well as whether the crypto vbdev should be built or not. Change-Id: Ib1cfd15b63b29acf3c2f7345d0d7edfd94716620 Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com> Signed-off-by: paul luse <paul.e.luse@intel.com> Reviewed-on: https://review.gerrithub.io/404983 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com> Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com> Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
2018-03-22 23:24:14 +00:00
DPDK_OPTS += CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
DPDK_OPTS += CONFIG_RTE_LIBRTE_REORDER=n
endif
bdev/compress: Add configure option and build dependencies Includes the required DPDK dependencies for SPDK block Reduce aka Compression. Change-Id: Ic1ea3cbeb9373a7700f6f0c2a3194d65d6a34a41 Signed-off-by: paul luse <paul.e.luse@intel.com> Reviewed-on: https://review.gerrithub.io/c/429523 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com>
2018-10-15 20:46:41 +00:00
ifeq ($(CONFIG_REDUCE),y)
dpdk: build and link QAT for both crypto and compression In prep for full QAT compression support later in this patch series. dpdkbuild/Makefile slightly refactored for readability, x86 crypto check removed as it pre-dated checks we now have in configure. Signed-off-by: paul luse <paul.e.luse@intel.com> Change-Id: Iaaaf51b9eb5e18840f47d2d4f431c5a6e8c420ee Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456408 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
2019-05-31 01:04:26 +00:00
DPDK_FRAMEWORK = y
bdev/compress: Add configure option and build dependencies Includes the required DPDK dependencies for SPDK block Reduce aka Compression. Change-Id: Ic1ea3cbeb9373a7700f6f0c2a3194d65d6a34a41 Signed-off-by: paul luse <paul.e.luse@intel.com> Reviewed-on: https://review.gerrithub.io/c/429523 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com>
2018-10-15 20:46:41 +00:00
DPDK_OPTS += CONFIG_RTE_LIBRTE_PMD_ISAL=y
bdev/crypto: add /include symlink for ISAL Currently we only include the dir just above ISA-L which allows the isal.h file includes to be found however DPDK can't find isa-l.h at that location because its one level deeper. By adding a symlink in the isa-l subdir we can redirect DPDK to find the isa-l header files. Change-Id: Ieeabd4273bade0241db5581764b2169103f9770f Signed-off-by: paul luse <paul.e.luse@intel.com> Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445767 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com>
2019-02-21 18:57:24 +00:00
DPDK_CFLAGS += -I$(ISAL_DIR)
dpdkbuild: specify ldflags In DPDK 19.05 there's a new test app which we obviously don't need to build, but we have no way not to, as it's built together with a library that we do need. That app may try to link with crypto and compress PMDs, which require IPSec and ISA-L respectively. If those were not installed on the system, the linking would fail. We fix it by providing DPDK with extra -L/path/to/[...] Change-Id: I652efb669d10d2d03d0f643ce539404c1f0e38c4 Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com> Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455825 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
2019-05-27 12:03:51 +00:00
DPDK_LDFLAGS += -L$(ISAL_DIR)/.libs
bdev/compress: Add configure option and build dependencies Includes the required DPDK dependencies for SPDK block Reduce aka Compression. Change-Id: Ic1ea3cbeb9373a7700f6f0c2a3194d65d6a34a41 Signed-off-by: paul luse <paul.e.luse@intel.com> Reviewed-on: https://review.gerrithub.io/c/429523 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com>
2018-10-15 20:46:41 +00:00
else
DPDK_OPTS += CONFIG_RTE_LIBRTE_PMD_ISAL=n
endif
dpdkbuild: build rte_vhost only if SPDK vhost is built DPDK rte_vhost has some nasty dependencies which we don't necessarily want to resolve if we don't want to use vhost at all. We'll now build rte_vhost only if SPDK vhost is built. Change-Id: Icb830b11cc128eb8ee357dad94dfe62ac0cf2cce Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com> Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460529 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com> Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
2019-07-04 14:36:06 +00:00
ifeq ($(CONFIG_VHOST),y)
DPDK_OPTS += CONFIG_RTE_LIBRTE_ETHER=y
DPDK_OPTS += CONFIG_RTE_LIBRTE_CMDLINE=y
DPDK_OPTS += CONFIG_RTE_LIBRTE_METER=y
DPDK_OPTS += CONFIG_RTE_LIBRTE_HASH=y
DPDK_OPTS += CONFIG_RTE_LIBRTE_VHOST=y
else
DPDK_OPTS += CONFIG_RTE_LIBRTE_ETHER=n
DPDK_OPTS += CONFIG_RTE_LIBRTE_CMDLINE=n
DPDK_OPTS += CONFIG_RTE_LIBRTE_METER=n
DPDK_OPTS += CONFIG_RTE_LIBRTE_HASH=n
DPDK_OPTS += CONFIG_RTE_LIBRTE_VHOST=n
endif
dpdk: build and link QAT for both crypto and compression In prep for full QAT compression support later in this patch series. dpdkbuild/Makefile slightly refactored for readability, x86 crypto check removed as it pre-dated checks we now have in configure. Signed-off-by: paul luse <paul.e.luse@intel.com> Change-Id: Iaaaf51b9eb5e18840f47d2d4f431c5a6e8c420ee Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456408 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
2019-05-31 01:04:26 +00:00
ifeq ($(CONFIG_IGB_UIO_DRIVER),y)
DPDK_OPTS += CONFIG_RTE_EAL_IGB_UIO=y
else
DPDK_OPTS += CONFIG_RTE_EAL_IGB_UIO=n
endif
make: enable building igb_uio without crypto/reduce It turns out that this driver is generally useful, not just within the context of compress/crypto. fixes GitHub issue #1189 Change-Id: Ieea8037a240f0302e45ce865632be29821f82a7e Signed-off-by: Seth Howell <seth.howell@intel.com> Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/792 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Paul Luse <paul.e.luse@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com> Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com> Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com> Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
2020-02-11 19:20:57 +00:00
ifeq ($(DPDK_FRAMEWORK),y)
DPDK_OPTS += CONFIG_RTE_LIBRTE_PMD_QAT=y
DPDK_OPTS += CONFIG_RTE_LIBRTE_PMD_QAT_SYM=y
dpdk: build and link QAT for both crypto and compression In prep for full QAT compression support later in this patch series. dpdkbuild/Makefile slightly refactored for readability, x86 crypto check removed as it pre-dated checks we now have in configure. Signed-off-by: paul luse <paul.e.luse@intel.com> Change-Id: Iaaaf51b9eb5e18840f47d2d4f431c5a6e8c420ee Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456408 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
2019-05-31 01:04:26 +00:00
else
DPDK_OPTS += CONFIG_RTE_LIBRTE_PMD_QAT=n
DPDK_OPTS += CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n
endif
Fix build issues when building on an ARM 64 platform This patch arranges to have dpdk built with the T=arm64-armv8a-linuxapp-gcc make option when building on an ARM 64 platform. Change-Id: I46d266af9171f02e78ed51cec8052c4f91304092 Signed-off-by: Barry Spinney <spinney@mellanox.com> Reviewed-on: https://review.gerrithub.io/386708 Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com> Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
2017-11-10 19:57:27 +00:00
ifeq ($(TARGET_MACHINE),aarch64)
DPDK_CONFIG := arm64-armv8a
else
dpdk: update the dpdk submodule to v18.08 Also use the DPDK's default T=x86_64-native-* configuration target instead of T=spdk-*, as the T=spdk-* is no longer available in spdk-18.08 branch of our DPDK fork. Change-Id: If12e7ae1acabece129b63ba2f1bec6b0b65678ca Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com> Reviewed-on: https://review.gerrithub.io/423053 Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com> Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com>
2018-10-04 11:24:38 +00:00
DPDK_CONFIG := $(TARGET_MACHINE)-native
Fix build issues when building on an ARM 64 platform This patch arranges to have dpdk built with the T=arm64-armv8a-linuxapp-gcc make option when building on an ARM 64 platform. Change-Id: I46d266af9171f02e78ed51cec8052c4f91304092 Signed-off-by: Barry Spinney <spinney@mellanox.com> Reviewed-on: https://review.gerrithub.io/386708 Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com> Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
2017-11-10 19:57:27 +00:00
endif
build: add dpdk as a submodule This will allow a git clone to default to an SPDK-specific version of the DPDK repository. Users can still override to use a separate DPDK repository/installation with the --with-dpdk configure script options. While here, remove gzip option for the git-archive operations in autopackage.sh. We need to add a git-archive for the DPDK submodule if we are using it, and compressing at -9 adds a lot of unnecessary time. Since we are not archiving these packages, there is no need to compress them. Also explicitly disable coverage and ubsan for the autopackage build, since this build is only to test compilation and is not actually used for any test execution. Signed-off-by: Jim Harris <james.r.harris@intel.com> Change-Id: I3cf8a2ed984003a175cdece6542636ede8cb2479
2017-05-08 22:07:13 +00:00
make: add cross-compilation support There might be a need for user to cross-compile SPDK for other platforms than native. Since DPDK supports cross-compilation already, only enablement of cross-compilation for SPDK is missing. This patch aims to provide the user with additional option to configure script that works similar to what DPDK already provides. To enable cross-compilation run ./configure.sh with additional --cross-prefix parameter. The parameter should work in similar manner to DPDK CROSS parameter and specifies prefix of cross-compiler defined in PATH variable. Note: To cross-compile, toolchain must have SPDK dependencies such as e.g. Libaio. Signed-off-by: Amelia Blachuciak <amelia.blachuciak@intel.com> Change-Id: Ia7cb879d39d624552cad1af98a563070ea7676b2 Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460977 Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com> Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com> Reviewed-by: Paul Luse <paul.e.luse@intel.com> Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
2019-07-09 12:40:41 +00:00
ifneq ($(CONFIG_CROSS_PREFIX),)
DPDK_OPTS += CROSS=$(CONFIG_CROSS_PREFIX)-
endif
build: add dpdk as a submodule This will allow a git clone to default to an SPDK-specific version of the DPDK repository. Users can still override to use a separate DPDK repository/installation with the --with-dpdk configure script options. While here, remove gzip option for the git-archive operations in autopackage.sh. We need to add a git-archive for the DPDK submodule if we are using it, and compressing at -9 adds a lot of unnecessary time. Since we are not archiving these packages, there is no need to compress them. Also explicitly disable coverage and ubsan for the autopackage build, since this build is only to test compilation and is not actually used for any test execution. Signed-off-by: Jim Harris <james.r.harris@intel.com> Change-Id: I3cf8a2ed984003a175cdece6542636ede8cb2479
2017-05-08 22:07:13 +00:00
ifeq ($(OS),Linux)
DPDK_CONFIG := $(DPDK_CONFIG)-linuxapp
build: update dpdkbuild Makefile for FreeBSD Fix NPROC assignment to work for FreeBSD as well. Tested with FreeBSD Release 10.3.0 Change-Id: I7ad6a6f7479a0fbf3261f44d9cd07248ce584df9 Signed-off-by: Paul Luse <paul.e.luse@intel.com> Reviewed-on: https://review.gerrithub.io/362963 Tested-by: SPDK Automated Test System <sys_sgsw@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com>
2017-05-29 21:58:32 +00:00
NPROC := $(shell nproc)
build: add dpdk as a submodule This will allow a git clone to default to an SPDK-specific version of the DPDK repository. Users can still override to use a separate DPDK repository/installation with the --with-dpdk configure script options. While here, remove gzip option for the git-archive operations in autopackage.sh. We need to add a git-archive for the DPDK submodule if we are using it, and compressing at -9 adds a lot of unnecessary time. Since we are not archiving these packages, there is no need to compress them. Also explicitly disable coverage and ubsan for the autopackage build, since this build is only to test compilation and is not actually used for any test execution. Signed-off-by: Jim Harris <james.r.harris@intel.com> Change-Id: I3cf8a2ed984003a175cdece6542636ede8cb2479
2017-05-08 22:07:13 +00:00
else
ifeq ($(OS),FreeBSD)
DPDK_CONFIG := $(DPDK_CONFIG)-bsdapp
build: update dpdkbuild Makefile for FreeBSD Fix NPROC assignment to work for FreeBSD as well. Tested with FreeBSD Release 10.3.0 Change-Id: I7ad6a6f7479a0fbf3261f44d9cd07248ce584df9 Signed-off-by: Paul Luse <paul.e.luse@intel.com> Reviewed-on: https://review.gerrithub.io/362963 Tested-by: SPDK Automated Test System <sys_sgsw@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com>
2017-05-29 21:58:32 +00:00
NPROC := $(shell sysctl hw.ncpu | awk '{print $$NF}')
build: add dpdk as a submodule This will allow a git clone to default to an SPDK-specific version of the DPDK repository. Users can still override to use a separate DPDK repository/installation with the --with-dpdk configure script options. While here, remove gzip option for the git-archive operations in autopackage.sh. We need to add a git-archive for the DPDK submodule if we are using it, and compressing at -9 adds a lot of unnecessary time. Since we are not archiving these packages, there is no need to compress them. Also explicitly disable coverage and ubsan for the autopackage build, since this build is only to test compilation and is not actually used for any test execution. Signed-off-by: Jim Harris <james.r.harris@intel.com> Change-Id: I3cf8a2ed984003a175cdece6542636ede8cb2479
2017-05-08 22:07:13 +00:00
endif
endif
ifeq ($(CC_TYPE),clang)
DPDK_CONFIG := $(DPDK_CONFIG)-clang
else
DPDK_CONFIG := $(DPDK_CONFIG)-gcc
endif
ipsec_mb: use EXTRA_CFLAGS to point DPDK to intel-ipsec-mb submodule This allows us to remove the requirement to install intel-ipsec-mb to system directories. Signed-off-by: Jim Harris <james.r.harris@intel.com> Change-Id: I579655a98b515cf148b7cd17823a9bb541ea6ad7 Reviewed-on: https://review.gerrithub.io/c/440785 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Seth Howell <seth.howell5141@gmail.com> Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com>
2019-01-13 20:28:21 +00:00
DPDK_CFLAGS += -fPIC
build: add dpdk as a submodule This will allow a git clone to default to an SPDK-specific version of the DPDK repository. Users can still override to use a separate DPDK repository/installation with the --with-dpdk configure script options. While here, remove gzip option for the git-archive operations in autopackage.sh. We need to add a git-archive for the DPDK submodule if we are using it, and compressing at -9 adds a lot of unnecessary time. Since we are not archiving these packages, there is no need to compress them. Also explicitly disable coverage and ubsan for the autopackage build, since this build is only to test compilation and is not actually used for any test execution. Signed-off-by: Jim Harris <james.r.harris@intel.com> Change-Id: I3cf8a2ed984003a175cdece6542636ede8cb2479
2017-05-08 22:07:13 +00:00
ifeq ($(CONFIG_DEBUG),y)
dpdkbuild: enable -g for debug builds Signed-off-by: Jim Harris <james.r.harris@intel.com> Change-Id: I97ded298a6008fe73738e52c020b4a4d2d160256 Reviewed-on: https://review.gerrithub.io/363137 Tested-by: SPDK Automated Test System <sys_sgsw@intel.com> Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com>
2017-05-31 03:46:28 +00:00
DPDK_CFLAGS += -O0 -g
build: add dpdk as a submodule This will allow a git clone to default to an SPDK-specific version of the DPDK repository. Users can still override to use a separate DPDK repository/installation with the --with-dpdk configure script options. While here, remove gzip option for the git-archive operations in autopackage.sh. We need to add a git-archive for the DPDK submodule if we are using it, and compressing at -9 adds a lot of unnecessary time. Since we are not archiving these packages, there is no need to compress them. Also explicitly disable coverage and ubsan for the autopackage build, since this build is only to test compilation and is not actually used for any test execution. Signed-off-by: Jim Harris <james.r.harris@intel.com> Change-Id: I3cf8a2ed984003a175cdece6542636ede8cb2479
2017-05-08 22:07:13 +00:00
endif
dpdkbuild: pass along -Werror config from SPDK Change-Id: I0cbf2aa53dcdb82cc8bbdf3b47b5ae301a1191ec Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com> Reviewed-on: https://review.gerrithub.io/363489 Tested-by: SPDK Automated Test System <sys_sgsw@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com>
2017-06-02 06:16:33 +00:00
ifeq ($(CONFIG_WERROR),y)
DPDK_CFLAGS += -Werror
else
DPDK_CFLAGS += -Wno-error
endif
dpdkbuild: add EXTRA_DPDK_CFLAGS Users can specify this flag on the make command line to pass extra CFLAGS to the DPDK submodule build. This can be used with older compilers that are not supported by DPDK, and require -fno-strict-aliasing to compile. Signed-off-by: Jim Harris <james.r.harris@intel.com> Change-Id: Ib99e64297402c07395c009987ccffe29099dffab Reviewed-on: https://review.gerrithub.io/429489 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com> Reviewed-by: Changpeng Liu <changpeng.liu@intel.com> Reviewed-by: <shahar.salzman@kaminario.com>
2018-10-15 15:47:28 +00:00
ifdef EXTRA_DPDK_CFLAGS
$(warning EXTRA_DPDK_CFLAGS defined, possibly to work around an unsupported compiler version)
$(shell sleep 1)
endif
# Allow users to specify EXTRA_DPDK_CFLAGS if they want to build DPDK using unsupported compiler versions
DPDK_CFLAGS += $(EXTRA_DPDK_CFLAGS)
Makefile: don't override MAKEFLAGS in submake Apparently make doesn't like it: make[2]: warning: -jN forced in submake: disabling jobserver mode. We only did it because of scan-build - it detects a ton of issues (or false positives) in our dependencies. To disable it, we don't have to override MAKEFLAGS, but just CC - that's what we'll do now. Fixes #896 Change-Id: I5eea984d6bbfbf4caabdd704850fac840fed3524 Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com> Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/927 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com> Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
2019-08-26 07:02:35 +00:00
# Force-disable scan-build
SUB_CC = $(patsubst %ccc-analyzer,$(DEFAULT_CC),$(CC))
dpdkbuild: completely rebuild dpdk on SPDK config change Configuring SPDK with different options might result in enabling different CONFIG_RTE_LIB* options, but since it does not modify any DPDK config files, DPDK doesn't get rebuilt and keeps using older, potentially outdated build options. We'll now clear dpdk/build whenever SPDK config is modified, which will result in automatically re-configuring DPDK. Change-Id: I9c7c3434dc317e4f47767d7b3df3df48db2b0d5b Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com> Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460563 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
2019-07-04 20:24:48 +00:00
$(SPDK_ROOT_DIR)/dpdk/build: $(SPDK_ROOT_DIR)/mk/cc.mk $(SPDK_ROOT_DIR)/include/spdk/config.h
$(Q)rm -rf $(SPDK_ROOT_DIR)/dpdk/build
build: add intel-ipsec-mb submodule This is a dependency of the DPDK crypto framework. The submodule is currently set to our SPDK fork of the ipsec library which is based off of the library v0.48 tag, as required by DPDK plus one minor Makefile change on the 'spdk' branch of the fork. Also added is a configure option '--with-crypto' and the associated conditionals for building DPDK with or without the library dependency. The crypto vbdev patch will use this same configure option to determine DPDK opts as well as whether the crypto vbdev should be built or not. Change-Id: Ib1cfd15b63b29acf3c2f7345d0d7edfd94716620 Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com> Signed-off-by: paul luse <paul.e.luse@intel.com> Reviewed-on: https://review.gerrithub.io/404983 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com> Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com> Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
2018-03-22 23:24:14 +00:00
$(Q)$(MAKE) -C $(SPDK_ROOT_DIR)/dpdk config T=$(DPDK_CONFIG) $(DPDK_OPTS)
build: add dpdk as a submodule This will allow a git clone to default to an SPDK-specific version of the DPDK repository. Users can still override to use a separate DPDK repository/installation with the --with-dpdk configure script options. While here, remove gzip option for the git-archive operations in autopackage.sh. We need to add a git-archive for the DPDK submodule if we are using it, and compressing at -9 adds a lot of unnecessary time. Since we are not archiving these packages, there is no need to compress them. Also explicitly disable coverage and ubsan for the autopackage build, since this build is only to test compilation and is not actually used for any test execution. Signed-off-by: Jim Harris <james.r.harris@intel.com> Change-Id: I3cf8a2ed984003a175cdece6542636ede8cb2479
2017-05-08 22:07:13 +00:00
dpdkbuild: stop building ipsec library with make In early development of crypto we built the lirbary using dpdkbuild/Makefile but later due to a DPDK change we needed to move to a newer version of the ipsec library that is now built and installed in pkgdep.sh btu we never removed it from the makefile. This patch removes the extra building of the ipsec module. Change-Id: I367618440074d952ff13c6e2098fc3a572cc785e Signed-off-by: paul luse <paul.e.luse@intel.com> Reviewed-on: https://review.gerrithub.io/429519 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com> Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com>
2018-10-15 20:08:44 +00:00
all: $(SPDK_ROOT_DIR)/dpdk/build
Makefile: don't override MAKEFLAGS in submake Apparently make doesn't like it: make[2]: warning: -jN forced in submake: disabling jobserver mode. We only did it because of scan-build - it detects a ton of issues (or false positives) in our dependencies. To disable it, we don't have to override MAKEFLAGS, but just CC - that's what we'll do now. Fixes #896 Change-Id: I5eea984d6bbfbf4caabdd704850fac840fed3524 Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com> Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/927 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com> Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
2019-08-26 07:02:35 +00:00
$(Q)$(MAKE) -C $(SPDK_ROOT_DIR)/dpdk/build EXTRA_CFLAGS="$(DPDK_CFLAGS)" EXTRA_LDFLAGS="$(DPDK_LDFLAGS)" CC=$(SUB_CC) T="$(DPDK_CONFIG)" $(DPDK_OPTS)
build: add intel-ipsec-mb submodule This is a dependency of the DPDK crypto framework. The submodule is currently set to our SPDK fork of the ipsec library which is based off of the library v0.48 tag, as required by DPDK plus one minor Makefile change on the 'spdk' branch of the fork. Also added is a configure option '--with-crypto' and the associated conditionals for building DPDK with or without the library dependency. The crypto vbdev patch will use this same configure option to determine DPDK opts as well as whether the crypto vbdev should be built or not. Change-Id: Ib1cfd15b63b29acf3c2f7345d0d7edfd94716620 Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com> Signed-off-by: paul luse <paul.e.luse@intel.com> Reviewed-on: https://review.gerrithub.io/404983 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com> Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com> Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
2018-03-22 23:24:14 +00:00
build: add dpdk as a submodule This will allow a git clone to default to an SPDK-specific version of the DPDK repository. Users can still override to use a separate DPDK repository/installation with the --with-dpdk configure script options. While here, remove gzip option for the git-archive operations in autopackage.sh. We need to add a git-archive for the DPDK submodule if we are using it, and compressing at -9 adds a lot of unnecessary time. Since we are not archiving these packages, there is no need to compress them. Also explicitly disable coverage and ubsan for the autopackage build, since this build is only to test compilation and is not actually used for any test execution. Signed-off-by: Jim Harris <james.r.harris@intel.com> Change-Id: I3cf8a2ed984003a175cdece6542636ede8cb2479
2017-05-08 22:07:13 +00:00
clean:
dpdkbuild: stop building ipsec library with make In early development of crypto we built the lirbary using dpdkbuild/Makefile but later due to a DPDK change we needed to move to a newer version of the ipsec library that is now built and installed in pkgdep.sh btu we never removed it from the makefile. This patch removes the extra building of the ipsec module. Change-Id: I367618440074d952ff13c6e2098fc3a572cc785e Signed-off-by: paul luse <paul.e.luse@intel.com> Reviewed-on: https://review.gerrithub.io/429519 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com> Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com>
2018-10-15 20:08:44 +00:00
$(Q)rm -rf $(SPDK_ROOT_DIR)/dpdk/build
build: add 'make install' rule For now, this only installs libraries and headers; we will need to consider which binaries should be installed and what they should be named before we add them to the install rule. Change-Id: I78dc8631f793d0df88cd884b0ac66406df9e4427 Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com> Reviewed-on: https://review.gerrithub.io/387637 Tested-by: SPDK Automated Test System <sys_sgsw@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com>
2017-11-15 17:36:36 +00:00
install: all
Makefile: Add possibility to uninstall spdk. Add uninstall target to makefiles to be able to perform reverse of install target. Fixes #464 This patch adds 'uninstall' target to makefile. 'make uninstall' will remove spdk_tgt app, headers, libraries and shared libraries from system directories defined by $DESTDIR. Additionaly, if there will be any empty directories left after this operation, they will be removed as well. Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com> Change-Id: I7b07fb4b81081d3914ff09165991fbe3a26b9067 Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com> Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/431471 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com>
2019-01-02 09:28:02 +00:00
uninstall:
@:
Reference in New Issue Copy Permalink