Currently we don't resubmit receive request associated with AER
request to SRQ. This leads to reducing of SRQ elements and may
lead to non responsive NVMF target.
Fixes#1507
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3558 (master)
(cherry picked from commit a3f89d62eb495cf5449ffcd926974da08ace8181)
Change-Id: Ie96f8c4be0202ae973e561ebe5ea28688a6a3b72
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3599
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Fixes#1498
When shutting down the application, it was possible to
reference stale ocf_cache pointer. This was the case
when two or more vbdev_ocf devices were based on top
of single cache bdev.
This issue did not occur outside of the shutdown case,
since RPC only allows deletion of the vbdev_ocf.
This erases on disk metadata and next run of the application,
would not detect such vbdev_ocf.
Shutdown meanwhile works different, by first stopping
the instance of running "ocf_mngt_cache" and later detaching
"core" devices (the ones being cached). This prevented
erasing the on disk metadata and allowed for restarted
application to detect vbdev_ocf.
See patch (1292ef2) for details.
Since references to ocf_cache are copied between vbdev_ocf
[see start_cache()], the reference count inside ocf_cache
was limited to original ocf_mngt_cache_start() and
management queue creation. First call into ocf_mngt_cache_stop()
released all references to ocf_cache. Leaving other
vbdev_ocfs pointing to released memory.
This patch works around this issue by increasing ref cnt
on ocf_cache for each vbdev based on top of it.
It allows to call into ocf_mngt_cache_stop(), but not
release the memory for ocf_cache until last vbdev.
Note:
A proper redesign here is in order:
- either rearranging structures to be based around single ocf_cache,
rather than multiple vbdev_ocf instances
- better use of OCF API to reduce book keeping logic in vbdev
There are plans to implement detach/attach in RPC,
so it should be a focus during that effort.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3574 (master)
(cherry picked from commit 1350922d09)
Change-Id: I560a7fbb1c052bf53970e655bdb60803c561a252
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3593
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There are additional conditions which SPDK tracks,
that are known before issuing call to OCF.
Two main ones are:
- if vbdev->ocf_cache was not yet created [start_cache()]
- if the cache bdev was opened [attach_base()]
Both happen for the first cache bdev once. Then for
consecutive vbdev_ocf on same cache bdev, reference
will be copied.
This call will simplify checking both conditions.
Calling into OCF with NULL or stale ocf_cache pointer,
rightly so will cause issues with ASAN.
Related #1498
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3573 (master)
(cherry picked from commit 868ba17780)
Change-Id: Ib202c15bda4cbbffa1516c69168e8bfb80370047
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3592
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This reverts commit 6194cb2e15.
It's unclear whether we need to add a new API for the env layer
for upcoming work. Nothing currently uses it. When we have a clear
need, we can add this back in.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3561 (master)
(cherry picked from commit e12a4f6ec8)
Change-Id: I174276799d650a1365b37a737271a54a796cd455
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3580
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This flag only works for local device. If the device from the kernel
is getting from remote (e.g., /dev/nvme2n1 is from NVMe-oF target),
then it will not work for those kernel devices while using
IORING_SETUP_IOPOLL flag.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3531 (master)
(cherry picked from commit d2a194c4f0)
Change-Id: Ide396de9f53b884c4d12af64693293d57fac9523
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3572
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will allow us to resize the backend bdev of vhost-blk
and notify the guest OS that the capactiy of virtio-blk
disk has been resized.
The spdk api entry is `spdk_bdev_notify_blockcnt_change`.
Any bdev if used as vhost-blk backend may need to implement
a rpc that calls this function.
Related DPDK patch has been merged and release in 20.02.
https://www.mail-archive.com/dev@dpdk.org/msg153365.html
Signed-off-by: Li Feng <fengli@smartx.com>
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1468 (master)
(cherry picked from commit b45f293d57)
Change-Id: I961c61de0fc03e210d776035a40f3a4adfa9b4f3
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3571
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Added to the framework as well as all 3 engines. Needed by apps
in the event that they have to fail following the creation of a
batch, allows them to tell the framework to forget about the batch
as they have no intent to send it.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3389 (master)
(cherry picked from commit 8d059e7a18)
Change-Id: Id94754ab1350e5a969a5fd2306bd59c38f0a0120
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3549
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When a process cleans up IO qpairs from another crashed
process in a multi-process environment, we must not try to
abort reqs for that IO qpair. Any reqs will contain callbacks
for the crashed process which we must not try to execute in
a different process.
Fixes issue #1509.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3536 (master)
(cherry picked from commit 751e2812bc)
Change-Id: I5e58cce7bdb86e3feb4084733815c086901f867e
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3548
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
To specify the desired logical block size. Must be 4K or 512.
If no block size is provided a default of 0 means to use the
underlying bdev block size. For cases where something other
than 4K or 512 is desired, format the underlying device
accordingly and don't specify a logical block size on creation
of the compress vol.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3177 (master)
(cherry picked from commit 62b3b171cb)
Change-Id: I58b71e210cfa77b3237c0c454585c734e2e22aea
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3547
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since rqpair->qpair.group is set to NULL when we remove the
qpair from poll group, we fail to send event to qpair's thread.
This patch adds a pointer to io_chaneel to spdk_nvmf_rdma_qpair
structure and a function to handle poll_group_remove transport
operation. In this function we get io_channel from nvmf_tgt,
this channel will be used to get a thread for sending
async event notification. This also guarantees that the thread
will be alive while we are destroying qpair.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3475 (master)
(cherry picked from commit 3d1d4fcf54)
Change-Id: I1222be9f9004304ba0a90edf6d56d316d014efda
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3545
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Makefile support in DPDK was deprecated and will be removed soon,
so switch to the officially supported way of building DPDK -
with meson and ninja. Two new tools. Basically, our Makefiles
will invoke meson+ninja for DPDK, no other SPDK components are
affected.
Apparently DPDK wanted to move away from an octopus-like config
system and the ideology behind meson configuration is simple now:
build everything by default. Some PMDs can be explicitly disabled
with meson command line, but all libraries (both static and shared
versions) and test apps are built unconditionally.
How long does it take to build minimal DPDK with meson? Too much.
On my machine half of the total build time is spent on libraries
we don't need at all. (I have some hacks up my sleeve to disable
building those libraries - see the subsequent patch.) As for the
official way of building a minimal DPDK, there was a patch [1]
on dpdk mailing list to introduce more specific configuration,
but it was rejected:
> We talked about this a few times in the past, and it was actually one
> of the design goals to _avoid_ replicating the octopus-like config
> system of the makefiles. That's because it makes the test matrix
> insanely complicated, not to mention the harm to user friendliness,
> among other things.
>
> If someone doesn't want to use a PMD, they can just avoid installing it
> - it's simple enough.
>
> Sorry, but from me it's a very strong NACK.
Let's not follow that direction, hack the DPDK build system instead.
As for advantages of meson+ninja over Makefiles? I can't find any.
It's another build system that does a lot for you with some functions,
magic options, and a built-in dependency system. It seems nice if you know
the syntax, but it's another component that you need to learn, debug,
and possibly find bugs in (there's a lot of github issues open for meson).
I would compare it to CMake.
As for changes in this patch: rather that explicitly disabling
PMDs we don't need, specify a list of PMDs we do need and disable
everything else found in ./dpdk/drivers/*. This way we won't have
to disable the new PMDs as they're added to DPDK.
Meson configuration also sets RTE_EAL_PMD_PATH #define to a valid directory
with built PMD shared libs. When it's set, DPDK dynamically loads all shared
libraries inside. The drivers there depend on DPDK shared libs and fail to
load in static SPDK builds, so we disable them altogether by unsetting
RTE_EAL_PMD_PATH in the meson-generated config file - just like
DPDK Makefiles did. EAL checks for RTE_EAL_PMD_PATH being empty and skips
loading any external PMDs then. We do it for both static and shared libs.
We specify all PMDs at build time for now, so there's just no need to load
them dynamically.
We have three more hacks in our submodule:
* disable building dpdk apps by commenting-out a line in dpdk/meson.build
* disable building unnecessary libs (build everything that spdk *may*
need)
* build isa-l compress pmd with `-L[...] -lisal`. DPDK expects to find
libisal with pkg-config. We don't want to prepare a pkg-config file,
so comment-out a failing check in another meson.build file and provide
isa-l through CFLAGS and LDFLAGS.
We also need to make some changes to our test/external_code. First of
all, -ldpdk is no more. Meson build generates a pkg-config file with all
libs, but we'll switch to it in a separate patch - for now just specify
all -lrte_ libs one by one. -Wl,--no-as-needed has to be added to some
test cases, otherwise rte_mempool_ring isn't loaded. We don't use any
APIs from this library, it only has a static constructor that provides
a few callbacks used by rte_mempool_create(). Also, since DPDK now builds
both static and shared libraries, we need to add -Wl,-Bstatic to force
using static libswhere required. It's only needed for DPDK libs, but we
use it for SPDK libs as well since there's no harm.
As for performance:
$ ./configure --enable-debug --with-crypto --with-reduce
$ time make -j40 -C dpdkbuild all
with meson:
real 0m8.287s
user 1m7.983s
sys 0m10.548s
before, with the old DPDK makefiles:
real 0m20.232s
user 0m55.921s
sys 0m16.491s
The subsequent builds are much faster too:
$ time make -j40 -C dpdkbuild all
meson:
real 0m0.876s
user 0m0.663s
sys 0m0.217s
makefiles:
real 0m10.150s
user 0m11.740s
sys 0m6.772s
[1] http://inbox.dpdk.org/dev/1a07d1cd59d84dce84e56c10fdabf5e5504560a6.camel@debian.org/
Change-Id: Ic65db563014100bafb12e61ee0530cc2ae64401d
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1440
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
With update to DPDK 20.05 EAL requires rte_telemetry,
external make tests were missing specifying this lib.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9f5eaea46b47da48fc81b4fff0199cd75ff6af78
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3483
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There is no need to perform scan-build on DPDK,
as changes there are outside of SPDK repository.
This prepares for next change in series that
updates submodule to DPDK 20.05, with it own set
of failures to address.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iedb143c81339f0d33fec9a5cb58b48e2651b0a4f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3522
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
related #1498
Updating DPDK 20.05 exposes issue listed in #1498.
Most likely the device removal path has to be re-worked
to accomodate multiple devices on the same cache instance.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I28f71ef2c2e1d9c2d19202cd33a932182bfb122c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3521
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Now that drivers can be registered from upper layers there's
no need to keep them centralized inside env.
(check_format.sh complains that spdk_pci_nvme_get_driver() shouldn't
start with the spdk_ prefix - to workaround that we move the function
declaration from one place in env.h to another - that's enough to
convince check_format it really is a public function)
Change-Id: If86aebd6c997349569c71430ec815b413eb44ef8
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3187
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This allows SPDK apps to register new PCI drivers outside of
the env layer, enabling SPDK as a whole with new use cases.
Change-Id: I0c998a9ec249c3ca610b7b3b8b6caf616b16f64c
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3185
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
An alternative to spdk_pci_*_get_driver();
Change-Id: I20a80b3c655a37fb1c76da21c2b70d5678041fab
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3186
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We want to make struct spdk_pci_driver public, so add env-agnostic
fields that define a driver directly to that struct.
PCI driver registration (potentially in upper layers) will only use
spdk_pci_id-s and spdk pci drv_flags, then those will be translated
to DPDK equivalents inside env_dpdk.
Change-Id: Ia24ecfc99ebf0f54f096eaf27bca5ed9c0dfe01d
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3183
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The accel_fw API taks a uint8_t for fill pattern, the ioat build
command expects a full 64.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I55b33706a9e48fe7efd57a06816e11fdd8b7fa4c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3322
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For performance. Also allocate the accurate number of tasks instead
of just blindly doubling to account for batching.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I4e5accfd97477f908368f16d3fc1d8f47896a4d6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3321
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Not needed with new scheme around accel_task in prior patches.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ic6f16654db62fe1dc51b0822f0ff92261da4494c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3212
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
No longer allocate accel_tasks or convert to and from application
tasks and accel tasks.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id2d598d79bebcef522c76c125e65b100266ced57
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3210
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This was sort of a clunky interface requiring a couple of inline
functions in every app that wants to use the accel_fw moving
forward. By having the accel_fw public API accept a callback arg
instead of an accel_task combined with adding a pool of accel_tasks
in the accel_fw engine we can eliminate this.
After changing the parm to a cb_arg, changes were made to all accel_fw
interfaces to put cb_fn and cb_arg as the last parms in public and
private function calls.
Related bdev_malloc changes need to be in this patch in order to pass CI.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I2b75764e534562d91484a094c3352266156d8425
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3209
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will allow to override job config filename from CLI.
Note that -T is required when using job config that has
missing filenames, but then it is optional if job config is not used.
Change-Id: I7d392ff2d0554524cfcb5072182ec806013083de
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3452
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Some global argument and some code from verify_test_params()
could be removed.
Change-Id: I923f5f23fafd31ff48049bd16476f01c801bfbb8
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3278
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Instead of calling bdevperf_construct_job() directly,
create a job_config instance that would express
the same semantics and then use
bdevperf_construct_config_jobs() to create and run actual jobs.
The goal is to unify methods and reduce code duplication.
Change-Id: I724e5788ea74868c9e9c8128d658e720d211f253
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3510
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This parameters allow for low cost refactoring
because with them we can simplify construct_multithread_jobs()
by creating instances of job_config during its invocation
and then handling those in construct_config_jobs().
Change-Id: I73057a9a65f58e48ac719f30e918d7a05ffc0f28
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3509
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Implement parsing of config file,
including overall format of sections/parameters (using lib/conf)
as well as filename, bs, iodepth and cpumask parameters (based on FIO).
Also implement creating jobs based on config file.
The only required parameter that is missing is 'rw'.
It will be added in a separatate patch because it requires quite
different code than for other parameters.
Duplications that this patch introduces with respect to legacy
code are addressed in following patches.
Change-Id: Ie19e55dc66369e795a97b53a4223beafa10d8fe8
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3189
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Accept job thread as argument
in bdevperf_construct_job().
This will allow for using single thread for
multiple jobs, as it is in FIO if multiple filenames are specified.
Change-Id: I0b6aa69aae1e1bf099170d3d495e0a83f97a857b
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3365
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
env_dpdk_get_mem_stats RPC has been requested to be
available in bdevperf.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I10aea634851e21018b223d7331b1bbeb7630a09c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3520
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This function hasn't kept up properly with the states that
we use for tracking the qpair lifecycle.
Add checks for NVME_QPAIR_DISCONNECTING and NVME_QPAIR_DESTROYING.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I51607d4f00e94937b08fca28e766163580d46461
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3359
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Parse fio output to CSV.
Calculate average read and write metrics while
parsing and present final results.
Change-Id: I8f6d7f84205be409f0ccbba7a42eb7888b2cb03d
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3253
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
There is a lot of extra lines at top of the output file
in case fio is used in client-server mode and with json
output mode. These lines make it resulting JSON file
not possible to parse.
Remove this lines so that the JSON file is ready to
be used in any later parsing functions.
Change-Id: Ie575941310f0d17b0285969f6b247f2fa653168c
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3237
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Function get_nvme_devices_count in kernel mode is
unnecessary called, this caused fails.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ie1c613f9a46707b9e4f821d03644a8b45bf52966
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3508
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Getting number of nvme devices before check if this is
null_block test caused fails.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I55b0399561ddb11b2f6c36408a56c525e813d239
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3497
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
