It's possible there's a delay between spdk_ftl_dev_free setting
dev->halt and sending message to core thread which would set
reloc->halt. This patch should bridge this gap and prevent potential
additional/unneeded relocations from happening.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I3d69fe86900c9233fadd8e3795accb36b1c01791
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461598
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_nvme_ctrlr_get_ns() can return NULL, which was
not verified, but dereferenced anyway.
Change-Id: Ib0554148cc47ea3ff2afa1862ac962f284fe6d43
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462486
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The cache needs to be scrubbed during the initial device creation as
well as after power loss recovery. This patch extracts the scrubbing
code into a separate function.
Change-Id: I2cb32e6993a3531470f29f466d990f0d96e45def
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459621
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
The header is being written from multiple places, so having a discrete
function serializing and writing it at the appropriate place in the
cache makes sense.
Change-Id: I7a1e6ebd05e8a4974d141f04202803f507b978e4
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459620
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
This patch adds a function that marks all active open bands to be
flushed and once all of them are closed it notifies the caller. This
needs to be done before the data from non-volatile cache can be scrubbed
to make sure its stored on bands the device can be restored from.
Change-Id: I9658554ffce90c45dabe31f294879dc17ec670b9
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459619
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch makes sure we're on the thread that requested creation /
deletion of the device when calling the notification callback.
Change-Id: Ia11a8054692874f6b57d4ebe3e3cb290c58e83b6
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459618
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Added ftl_dev_has_nv_cache to check if the FTL is configured to use
non-volatile cache or not. It makes these checks a bit more readable.
Change-Id: I0140df184d89a675e40bd5056718cd64301c553e
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459617
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Moving data from one band to the other doesn't need to be stored on the
non-volatile cache. Not only does it add unnecessary traffic to the
cache (wearing it out and reducing its throughput), but it requires us
to synchronize it with user writes to the same LBAs.
To avoid all that, this patch adds the FTL_IO_BYPASS_CACHE flag to all
writes coming from the reloc module. However, to be sure that the moved
data is stored on disk and can be restored in case of power loss, we
need to make sure that each free band have all of its data moved to a
closed band before it can be erased. It's done by keeping track of the
number of outstanding IOs moving data from particular band
(num_reloc_blocks), as well as the number of open bands that contains
data from this band (num_reloc_bands). Only when both of these are at
zero and the band has zero valid blocks it can be erased.
Change-Id: I7c106011ffc9685eb8e5ff497919237a305e4478
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458101
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds tracking of the phase of the writes to the non-volatile
cache. The phase is changed each time the whole buffer is filled. Along
with every block's LBA, current phase is stored in its metadata. This
allows for replaying the sequence of writes when recovering the data
from the cache after (unclean) shutdown.
Since there are only three possible phases to be stored on the device at
a time, phase is defined as a 2-bit counter cycling through 1 -> 2 -> 3
-> 1, with 0 marking blocks that were never written.
Change-Id: Id47880367934027fd102c32f183110acc9d4c62a
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458098
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
After filling whole non-volatile cache, block all further writes until
the header with metadata is written. This means that metadata stored on
the device will always be up-to-date with the most recent write
sequence.
Change-Id: I15b724b52814289622374ce77e5c3b23173a75c6
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458097
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Check the type of DIF used by the bdev specified as the non-volatile
write cache. If it's anything other than SPDK_DIF_DISABLE, fail the
initialization, as we don't support any other type yet.
Change-Id: Ie8bc1729558e055989d7925bc55f6307ee738f0e
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458096
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
When creating FTL device using non-volatile cache, zero out the
non-volatile cache and store metadata (device's UUID, size of the cache)
in the first block.
Change-Id: Id8f212aef756e86e8a215582ab7c32a635e18938
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458094
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
In case ANM event occurs on open band there
can be situation that reloc will try to read
block on which there is ongoing write.
This is happening because lba valid map is
updated before write submission to allow sent
consistent metadata to disk before all user
writes are completed.
Added write offset to the each chunk and
add check to reloc if particular ppa is written
on that chunk.
Change-Id: Ic95a06e69381d2152a86984b65a0975afaff955d
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458056
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Band tail PPA should be initialized when
new FTL instance is created.
Change-Id: Ie2fb72aa3f29eece0b6f8912998b33af3ba6b355
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457777
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Some of the errors were silent, making it hard to pinpoint the exact
failing call. This patch adds SPDK_ERRLOGs for each error path.
Change-Id: I71be6c97cab916ac52314e5f4e4d63358877bd96
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458426
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Send LBA along with the data block when mirroring writes to the
non-volatile cache. The metadata buffer is retrieved from the metadata
pool, so the maximum number of concurrent requests is limited to
nv_cache.max_request_cnt, while the number of blocks in a single request
is limited by nv_cache.max_requets_size.
Change-Id: If260302d16039183fb0fe073ef7419947532cfab
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458093
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Initialize the memory pool for storing metadata (LBAs) when writing data
to the non-volatile cache. The mempool's object count and size can be
configured via nv_cache.max_request_cnt / nv_cache.max_request_size
respectively.
Change-Id: I376df9a75be13d4b29ba475f350edf402c868d48
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458092
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
In lib/ftl PAGE_SIZE is used in many places. But I think there's no relation with
the host memory PAGE_SIZE.
In most changes, PAGE_SIZE is replaced by FTL_BLOCK_SIZE for ftl block size.
In ftl/ftl-anm.c, PAGE_SIZE is replaced by 4096 for alignment.
Change-Id: I72e7c65c83b9fe1a4e50944dc5d90b9459b4e593
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455347
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Keep track of read lba map segments to avoid
unnecessary traffic in case ANM events.
Lba map is divided on 4KB segments which can
store 512 lba entries.
In case multipe read request on same segment
keep pending request list and process it in
read_lba_map() completion callback.
Change-Id: I2661bdb716ab7c975140e0b37aebcb17aa23901d
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453371
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If a band wasn't closed during shutdown (ie. after dirty shutdown),
the start md contains valid data, however end md does not (or it may
not be written at all).
The config gives the user the ability to specify if encountering
this case should result in an error, or if ftl should pad the band
with data and recover from closed bands only.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: If02f7ca8bc90bb61698fb710fee2274af6af01e4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455513
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The patch also changes, so the command calculates the needed
chunk offset based on PPA, instead of relying on the user to
provide one.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: Ic4eec1b86ded4eb71de860015403294ed0c8c266
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455973
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Keep lba map related fields in separate struct directly
in the band. Cleanup interfaces depended on ftl_md.
Lba map structure will be extended in next commit.
Change-Id: I1cfc2f2ff0c0e90bb63f39808780845673002e70
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453370
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Extended ftl_band_read_lba_map() interface to provide
range of lba map to read.
Added ftl_xfer_offset_from_ppa() function for
calculating offset of read portion of lba map
based on ppa address from IO. This offset is
used for coping read lba map portion to internal
ftl buffer.
Change-Id: I1c72a18c79eda8c33cd0b20ea36a5d9521a09d06
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449435
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For the latest TLC NAND, one write buffer unit (rwb batch)
needs to be spread over three PUs instead of being allocated
to a single PU for better sequential read performance
since the optimal write size(ws_opt) of 3D TLC NAND is
3 times bigger than the optimal read size(rs_opt).
I added num_interleave_units in 'struct spdk_ftl_conf'
to configure the number of interleaving units per ws_opt.
If num_interleave_units is set as 1, the whole of the ws_opt
blocks are placed sequentially around each PU.
If num_interleave_units is set as N, the 1/N of the ws_opt
blocks are staggered. So consecutively numbered blocks
are separated by ws_opt / num_interleave_units.
The sequential read performance is improved from 1.9GiB/s
up to 2.97GiB/S with this patch on our system. No performance
degradation is observed on sequential writes or
4KB random reads/writes.
Please refer to the Trello card for more details.
https://trello.com/c/Osol93ZU
Change-Id: I371e72067b278ef43c3ac87a3d9ce9010d3fcb15
Signed-off-by: Claire J. In <claire.in@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450976
Reviewed-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Moved device configuration checks inside ftl_check_init_opts to allow
for validation against the geometry of the drive.
Change-Id: I8e813d30ef5feba641517872ce068824442cfdbc
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451516
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Claire Jihyun In <claire.in@circuitblvd.com>
Reviewed-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Added means to configure libftl to use (optionally) another bdev as
persistent write buffer cache.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I97028a681be168d9386eac8a226631ff772f803b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448629
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added internal retry IO queue. In case ENOMEM from
nvme layer request is put to retry queue. When some
inflight operations are completed try to make progress
on IOs in retry queue in first place.
Change-Id: Ie9d3d20bd34431ee57f9454f242b0cdca349c804
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448461
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Intermittent FTL test failure (ASAN) #717 reported an error, in
ftl_halt_poller() call, ftl_anm_unregister_device() will release
controller first, while in ftl_dev_free_sync() the IO queue pair
will be released again.
Change-Id: Ifac2aa68e66ee5f41eba80c11c61d9dc91ec3408
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448524
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The value is already initialized via caller.
Change-Id: I3426a9f34cc545337b6bd3d729ca65e31a8e962e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448523
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The ocssd spec and buildtime-check already ensures
sizeof(struct spdk_ocssd_geometry_data) is 4096, so we can use
struct spdk_ftl_dev::geo as buffer directly.
Change-Id: Id7a52f978d80284fe941d9f5d7bc7219518871e8
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/c/443069
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Verify that the namespace used is formatted with a supported LBA format
(4K block size).
Change-Id: I59e2ed71354e8530d9fa0e3f6b323ded83097afa
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441881
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch adds supplementary tracing for OCSSD library to allow
for more efficient debugging and profiling of the user I/O path
as well as the background tasks (maintaining write pointer,
defragmentation, ANM event handling, etc.).
Change-Id: I741f1304f4ee0eba019e31bea7814af475c3296e
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/431327
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
