Now that sessions have a separate flag to check if the
pollers are started, we can set the lcore field on any
thread we want. We currently assign it from within the
session thread to spdk_env_get_current_core(), but we
won't be able to use an equivalent get_current_poll_group()
function after we switch to poll groups. We will only
have a poll group object inside spdk_vhost_session_send_event(),
so that's where we move the lcore assignment for now.
Change-Id: Ib5fb37ec488de80e9d79432120c81500c297b608
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452395
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We used to rely on lcore >= 0 for sessions that are
started (have their pollers running) and in order to
prevent data races, that lcore field had to be set from
the same thread that runs the pollers, directly after
registering/unregistering them. The lcore was always
set to spdk_env_get_current_core(), but we won't be able
to use an equivalent get_current_poll_group() function
after we switch to poll groups. We will have a poll group
object only inside spdk_vhost_session_send_event() that's
called from the DPDK rte_vhost thread.
In order to change the lcore field (or a poll group one)
from spdk_vhost_session_send_event(), we'll need a separate
field to maintain the started/stopped status that's only
going to be modified from the session's thread.
Change-Id: Idb09cae3c4715eebb20282aad203987b26be707b
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452394
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add the UT test case to cover below function:
spdk_iscsi_portal_grps_destroy()
Change-Id: I910b1066ff306039af8d4634122f894ffb3d66e1
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453499
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Once set, those flags could be only overwritten - there
was no way to unset them using our configure script.
$ CFLAGS="-pedantic" ./configure
$ ./configure # pedantic still set
We'll now clear cc.flags.mk on each configure run, just
like we already do with config.mk.
Change-Id: I75c88606f21ca2c62bd322f3972ebf7dd815258b
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453789
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
By creating a list of qpairs, we can avoid looping over every connected
qpair to process sends each time we poll.
Change-Id: If24bbc363176f52fbfb756d56719edd885a21a11
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449264
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
By batching ibv sends each time we poll, we can reduce the number of
MMIO writes that we do.
Change-Id: Ia5a07b0037365abfa8732629c34d34a9ed49ac70
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449253
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Moved early read completion (due to cache hit or reading unwritten
data) traces to ftl_submit_read to keep them in one place. Also removed
the context parameter from next_ppa function, as it was unused.
Change-Id: Ic69174a6cdc0e626550cd673789e86bb891094bf
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453683
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Replaced the unnamed unions with named ones. It makes the assignments
easier (it allows for direct assignment instead of having to choose the
correct union member).
Change-Id: I130233a096070092275a040e73cbaf36106ae1ab
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453682
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This fixes incorrect LBA reported by traces (it reported the next one,
as the IO position was advanced before storing the trace).
Change-Id: I788853d729dd25e90c6c899be0616aa3a79d08b3
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453681
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Moved freeing the data into one place. Added error checks for all of the
pthread_spin_init calls.
Change-Id: Ic123f75f242fb71b92fcad5acf7b00588c2801c3
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450618
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Keep write buffer batches marked for resubmission on a separate queue
and treat them with higher priority.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: If5bedcfea2e7650b36da231ec3e0cd54e8d2484a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450264
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Most of our bash test scripts source autotest_common.sh
to be able to use some autotest-specific functions like
timing_enter(). The same test scripts allow specifying
custom command line parameters without actually realizing
that those parameters can be potentially picked up by
autotest_common.sh as well.
For example, if particular nvmf tests are run in "isolation"
mode by being executed with the first param set to "iso",
and there is a file named "iso" in the current dir, that
file will be sourced. This could be bad.
In this patch we stop sourcing or even processing $1 in
autotest_common.sh. Instead, the test configuration will
be sourced just once from autobuild.sh, autopackage.sh
and autotest.sh. If the user wants to run particular test
scripts manually, he should source an SPDK test configuration
by himself - manually as well. In most cases he won't even
have two, as only a few test scripts depend on SPDK_*
variables.
Note that we still have to setup the default values for
SPDK_* variables in autotest_common.sh because some of
our test scripts actually depend on them:
> if [ $SPDK_TEST_RBD -eq 1 ]; then ...
Because it lacks any type of quotes around SPDK_TEST_RBD,
it will print the following message when that variable
is unset:
> /bin/bash: line 0: [: -eq: unary operator expected
It doesn't trigger any error ($? == 0), but can be still
a bit misleading in the script output.
Change-Id: I350045d8582d66fe1ed7697d4bcbba324cb541ad
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453876
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Most of our test scripts source autotest_common.sh at the
very top of the file, and - since autotest_common.sh
enables xtraces inside - the first thing we'll see in test
output are likely xtraces from sourcing the configuration
file and setting up $config_params. Even a simplest test
script will produce a ton of output this way, making the
entire output unreadable. This is especially annoying when
the test script is run manually, so we get rid of it now.
All the SPDK autotest options and $config_params will be
printed elsewhere anyway.
Change-Id: I6d9c8e8ba261b632ffbb7d6d26d84eb7ccfb2ed8
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453875
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We're about to disable bash xtraces in autotest_common.sh
and currently that's the only place where the test
configuration is printed.
It might be still useful to print the entire configuration,
so now we'll be doing that from autorun.sh - just once!
Change-Id: I1371caacfc95c19b24a429b81baffeeef7dd1142
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Acked-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453874
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This way all the ./configure parameters are setup in one
place without any unrelated code in the middle.
Change-Id: I1cd8dc05e326b9ab3e8e51c193dd422fd8b5a00b
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453873
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We use that variable only inside autotest_common.sh so far,
but hopefully that's going to change now. Our tests still
hardcode /var/tmp/spdk.sock everywhere at the moment.
Change-Id: Iad862cb7674a8108d2a07f35b5298d21e009c5a1
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453872
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Put it all together at the top of the file so that
the file is less chaotic overall.
Change-Id: Ia92511e590692bbe31d0f626e9542374eaaab442
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453871
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK_RUN_ASAN was only effective on Linux so far,
even though libasan is available on BSD as well.
Let's fix that.
Change-Id: I58a1796f736616882f797313e22055122b050b57
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453870
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This way we can consistently track when xtrace in our
scripts is enabled or disabled.
> [...]
> xtrace_disable
> PREV_BASH_OPTS=ehxBE
> set +x
> xtrace_enable
> [...]
Change-Id: I2e813dc2a237a4620ea72d26a22a3c8cbeb269f9
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453248
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Factor out `set -x` and +x to separate functions. Changing
xtraces is not so trivial and we'll be improving it later
on. We can't factor out the code as is due to local variables,
so we already simplify it a bit in this patch.
Change-Id: Iecbf5cedf821b7b1b71da933ceb158761881a843
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453246
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Next patch will use this function earlier in the
file, so move the function now rather than in the
later patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I50de44f69d0aedffddd251d00491912fd4a0f503
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453780
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I12b4081d3cf57bda8b01911c25a9c13102a1115d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453741
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also fix call to this function that was treating the
print_on_error parameter as if it was dnr.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9f048e8873ae0fcf07c9c6d11329a3fb21d92bda
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453740
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We added this a long time back when debugging some
multi-process failures. This adds a lot of output
to the log which isn't helpful anymore.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4d46b744f30b32fddedc3dae32f40c077717a1bb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453909
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Our log_ut currently dumps two buffers which end up being
printed with a different column alignment.
`00000000 6c 6f 67 20 64 75 6d 70 log dump`
vs
`00000000 73 70 64 6b 20 64 75 6d 70 spdk dump`
In short dumps (len % 16 < 8) we didn't include the extra
arbitrary whitespace between the 8-byte parts.
Change-Id: I00bf1d334f71370922d939c4397a479f8d707112
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452058
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This function returns a pointer to the PCIe I/O registers for a controller
or NULL if unsupported for this transport.
Used for PCIe only, other transports return NULL.
Use with caution.
Signed-off-by: James Bergsten <jamesx.bergsten@intel.com>
Change-Id: I849f9de9ad259a65b1eef9c1237345eb7195b9bf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452927
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Adds support to spdkcli.py for raid devices via UIRaidBdev with
functionality to construct and destroy raid bdevs.
Information regarding the raid can be viewed via 'show_details' on a
given pooled_device child in the tree.
Signed-off-by: Mike Carlin <mikefcarlin@protonmail.com>
Change-Id: I2ca89e641b201c09b3d4db070eac6cc0c2cdec73
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452774
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
These were accidentally removed in a previous
patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idab274427c064ff8aff1cdca2dd80d7d24e8cce4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453747
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This test does resets which the nvme driver doesn't
really support yet for fabrics controllers. Some
recent patches accidentally broke resets for PCIe
controllers, and fixing that causes this test to
hang on fabrics controllers.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia5676130087a49555645b077f289bb40f6f27a43
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453916
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It isn't obvious why hosts are being disconnected at the moment.
Change-Id: I5515ba40883ccb20921d0da013b27670212bf649
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453034
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We marked the old set/clear/get_trace_flags as
deprecated in v19.01. These are now called
set/clear/get_log_flags (to reduce confusion with the
tracing framework). Use the new methods in this
patch series to mark these RPCs as deprecated.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5ce8992ce8f6c1de5d5596b5f94a1587555e8546
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453563
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will get used in upcoming patches that actually
create RPC aliases.
Thanks to Ben Walker for help on the deprecated_alias
helper.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ica4432888b1ecb9bd234690758f67ef82794c50a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453035
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This reduces some repeated code. I could have made both paths
call spdk_thread_exit(), but I want to add some stronger checks
around the tls_thread there eventually that wouldn't be valid
in the other path.
Change-Id: I61e1484536d8aef05f120d9ed394312b41f8445a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453575
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is all based on SPDK threads instead.
Change-Id: Idfd23d6541a548179be24b16540d62e5d7ea2a5c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451760
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
To be referenced in an upcoming blog post.
Change-Id: Ib1669b3223257d1c1978e8664edf9b1e078918a3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453453
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This has been on the TODO list for a long time
Change-Id: Ibdd130f976e9f4436a9dc94919878e2ff187e873
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453452
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now that SPDK_TEST_* default to 0, we can decidedly say
that if the requested test suite can't be run on your
system due to unmet dependencies (e.g. missing system pkg),
you will get an error.
Previously we would silently disable that test - e.g. when
someone ran with SPDK_TEST_RBD=1 but had no librbd system pkg
on his system, the SPDK autotest would return success without
running any RBD tests. That was very counter-intuitive.
We still silently disable a lot of tests inside our particular
test scripts. Hopefully we'll stop doing that eventually.
Change-Id: Ib400ba772c095b4d65fa8893a0669f3d8c3984e6
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453712
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
While here, also refactor IBV_WR_SEND_WITH_INV check
to use the new BUILD_CMD command.
Change-Id: Ieefe77d769f2b1369d204ec54b976fa11441af46
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453706
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If the user wants to build RDMA on BSD and IBV_WR_SEND_WITH_INV
is unavailable there he'll now get a warning message.
Change-Id: Ie6c6ce55d21de519bb371ceed44fb1e01d6dc878
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453705
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It doesn't have to be. In order to check if the system
header is available we'll now to try to compile a C program
that includes it.
Change-Id: Ie46c20dab5e96da746650bba1d5dbd0fc32ecec9
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453561
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This tests a variety of bdev-related commands against
our NVMe-oF target. The key ones are write_zeroes
and nvme_passthrough which until now weren't being
tested at all.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id8a5cfb2e41c2a7e8fd940b61b43a80c39993f9a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452936
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
