Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I80e1fdb8b0a3b944ab6efdd21187cef07b685c29
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11271
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
bs_back_dev_lba_to_io_unit() and bs_num_pages_to_cluster_boundary() are
unused inline functions. The last consumer (by the earlier _spdk_* name)
was removed in commit 6609b776.
Change-Id: Ib1babfed8002fb44451b337aa0db66c15a6805d2
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11561
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
bs_sequence_to_batch_completion has been unused since the removal of
other unused code in commit ba870c2e99.
Change-Id: Ifb60c65c1c68d1855b49eda4c57d99e983bca5ec
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11560
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
rte_dmadev was introduced in DPDK 21.11, and rte_vhost
is now dependent on it. So link rte_dmadev if we find
it and if CONFIG_VHOST is enabled.
Fixes issue #2374.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iccbf7cb897f51cbc9d545274d4d00a442b2fd353
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11594
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Some targets advertise large Maximum Queue Entries Supported (MQES)
value but fail to create long queues due to some other limitations,
e.g. lack of some resource. New '--io-queue-size' option allows to
workaround such issues. It may also be useful when researching queue
size impact on performance.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: Ie13b966070fbe5d8bb75cee59ae171bd25eafa63
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9090
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
JSON-RPC server (spdk_rpc_listen) only listens on
a UNIX domain socket. If users wish to issue
JSON-RPC calls over a TCP socket for debugging
purposes, they can forward calls using socat, i.e.
socat TCP4-LISTEN:8989,reuseaddr,fork,bind=127.0.0.1 \
UNIX-CLIENT:/var/tmp/spdk.sock
This could allow running spdk_top to debug or
monitor an SPDK application remotely. But currently
spdk_top -r option assumes AF_UNIX. Look at the
first character in the -r option (if provided) - if
it's '/' use AF_UNIX, otherwise AF_INET.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie9c33bb0fb66dff895359f6f6608862df42b542c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11567
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Michal Berger <michallinuxstuff@gmail.com>
Change-Id: Ic64efc12a0901c1436f55bea4b3f7a548fc705e1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10942
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jun Wen <junx.wen@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was left out by the ea71df4f48.
Signed-off-by: Michal Berger <michallinuxstuff@gmail.com>
Change-Id: Ibd341eaa7e5a0b1a409a9efad081555728b7f880
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10941
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We replaced it with upstream qemu for most of the CI jobs, hence the
SPDK's fork is not needed anymore.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ic65720709cbf26330e1ada61f313bba4c86eb6df
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10937
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jun Wen <junx.wen@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For reference, this was deprecated in Aug 2020, commit
ID 511fe1553.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic0a16af9113b8b136271a2ce6a071bbc379261c4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11545
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This parameter was ignored, and was a parameter to the
nvmf_set_config RPC.
For reference, this was deprecated in June 2020, commit
c37cf9fb.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I013f4d7cf874e7e26a8a1d299fdf9d8fa05da580
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11544
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This was a parameter on the nvmf_create_transport
RPC, and was replaced with max_io_qpairs_per_ctrlr to
reduce confusion on whether this number included the
admin queue or not.
nvmf_vhost test was using this deprecated parameter.
Change it to use -m (max_io_qpairs_per_ctrlr)
instead. '-p 4' would have been evaluated as 1 admin
queue + 3 I/O queues, but it's likely the intent
was for 4 I/O queues. This is a perfect example of
why this parameter was deprecated.
For reference, this was deprecated in June 2020,
commit 1551197db.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4364fc0a76c9993b376932b6eea243d7cefca9cd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11543
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
To supplement useful information in bdev trace record,
offset and len of each I/O have been added.
Signed-off-by: zhaoshushu.zss <zhaoshushu.zss@alibaba-inc.com>
Change-Id: I3e776144d16cb9eda2a9fb72b83d423ac3050f0d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11504
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added data structure to hold scheduler name,
scheduler period and governor name.
Implemented functions to get data from rpc and free memory after use.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I83108e29b9b80415c276d3592cb78ec3eaf9aeb9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5944
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
With async connect, we need to avoid the case
where the initiator is sending the icreq, and
meanwhile the application submits enough I/O
such that the request objects are exhausted, leaving
none for the FABRICS/CONNECT command that we need
to send after the icreq is done.
So allocate an extra request, and then use it
when sending the FABRICS/CONNECT command, rather
than trying to pull one from the qpair's STAILQ.
Fixes issue #2371.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If42a3fbb3fd9d863ee48cf5cae75a9ba1754c349
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11515
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Group fields such that those not used in the I/O path
are at the end of the structure.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I43eca1faacd29a5bf34be6ee644191d865cd42a9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11514
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This macro will be used in an upcoming patch
that needs to construct an nvme_request structure
outside of the standard nvme_allocate() routines.
Examined x86 optimized assembly with this patch,
and there is no change.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0f6b8500e06b56edc33f437f351536cf857d13d3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11513
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
rpc.py users can pipe RPC calls through stdin, which
reduces overhead compared to calling rpc.py
separately for each RPC.
It is common to put these RPC calls in a file, and
then pipe that file to rpc.py. To allow commenting
out RPC calls when doing debugging, have rpc.py
ignore any lines which begin with '#', allowing users
to comment out RPC calls (or even add comments
explaining the RPC calls) with a '#' character.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8d9c6ac95dd5864c16e4d69ba80f81799068e808
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11506
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Split part of IO completion into 2 functions.
This patch reduces changes in the next patch
which will reuse some part of spdk_bdev_io_complete
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Iaeac81aa5208b4ca303f60410b6a54f8df13b069
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11519
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Move part of function _bdev_io_set_buf which sets
metadata pointer to another function _bdev_io_set_md_buf
Next patches will make copying of bounce buffer async,
metadata will be copied when data copy completes.
This patch makes next change simpler
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Iced45393f43f9c5a4818e4e9eadb3351583e0c00
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11518
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Although there are no use cases right now where a batch can have
mixed op types, there may be in the future and rather than have
one blow up because ops have different reserved fields and its
not valid to submit an op with a non-zero reserved field, go
ahead and zero these out like we do with descriptors in the non
batch case.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I6d1bb416dc84aa1f76407c76aedf0768dd003218
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11325
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We always set num_batches to the same value we set num_descriptors
so just make it explicit. Makes it easier to experiment with
different values when performance testing.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I648262001772c791a032d6cab38dc3b03c1d55c1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11354
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Batch support has been removed from both the accel_fw and idxd
public API so remove the supporting docs.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I98d1ab7a80942ef69a824482beb76cf921bc3d7f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11379
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This has changed to control the number of read buffers allocated to the
group, but it is only valid to set this register if the device has
indicated it supports it. Further, the default value is what we want
anyway, so we can skip setting it altogether.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ic54672ea6cb16acc7613860e36d9f7033048bd98
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11484
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
All of the other structs and unions spell out register, so match the
style.
Change-Id: Ie502e80206305037d1518a1db590d89b7479abb4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11433
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is called GENSTS in the spec, so match that name.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I0e8f917e13908f3920ab297e14cb3adee856eaa5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11432
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The packing can always be dealt with using fixed-width types instead.
Change-Id: I1dc76d43439633e3c3d9b52ac1b8ceb017fb4dc4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11431
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will make the following patches have a smaller diff.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I6dc11e96fa9f6f0dd6690e5a0f0a8c144af96345
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11430
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
SPDK can submit more commands to remote NVMf target than allowed by
negotiated queue size. SPDK submits up to SQSIZE commands, but only
SQSIZE-1 are allowed.
Here is a relevant quote from NVMe over Fabrics rev.1.1a ch.2.4.1
“Submission Queue Flow Control Negotiation”:
If SQ flow control is disabled, then the host should limit the number
of outstanding commands for a queue pair to be less than the size of
the Submission Queue. If the controller detects that the number of
outstanding commands for a queue pair is greater than or equal to the
size of the Submission Queue, then the controller shall:
a) stop processing commands and set the Controller Fatal
Status (CSTS.CFS) bit to ‘1’ (refer to section 10.5 in the NVMe Base
specification); and
b) terminate the NVMe Transport connection and end the association
between the host and the controller.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: Ifbcf5d51911fc4ddcea1f7cde3135571648606f3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11413
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
According to NVMe over Fabrics specification (rev.1.1a) HSQSIZE sent
in RDMA_CM_REQUEST private data (ch.7.3.6.4) shall be the same as
SQSIZE later sent in Connect command (ch.3.3).
SPDK NVMe RDMA initiator adjusts SQSIZE to CRQSIZE received from
target in RDMA_CM_ACCEPT private data. Target is allowed to send
CRQSIZE < HSQSIZE if RNR retries are used. So, it is possible that
SQSIZE sent by SPDK will be lower than previously sent HSQSIZE. There
are targets validating this match and they reject connection from
SPDK.
Linux kernel NVMe initiator doesn't perform such adjustments and
connects well to such targets.
This patch aligns SPDK behavior with specification and Linux kernel
implementation.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I01968d1c07d284396fa5939932d85841351d7a45
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11350
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
DPDK rte_eal_firmware.c will use libarchive APIs when
libarchive is installed on the system. SPDK doesn't
currently account for this, so if the user has
libarchive installed, DPDK will emit libarchive calls
that don't get resolved during link phase for static
builds.
We've had a similar situation with libbsd for a long
time, where we remove the associated #define from the
DPDK build config header file before we kick off the
DPDK build. So extend that here for the
RTE_HAS_LIBARCHIVE #define.
It would be nicer to use pkg-config somehow to
generate the necessarily libraries to install on the
SPDK link line for static builds. But it's not
exactly straightforward, so this solution ended up
being the simplest by far, extending a mechanism
that's worked well with SPDK's dpdkbuild up until
this point.
Fixes issue #2357.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I79ff4648ee58a3e13f4b873f8acd1b31cca0fc31
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11385
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The controller data structure may be freed before subsystem resume done
callback, we can take endpoint as the input parameter to avoid this issue.
AddressSanitizer: heap-use-after-free on address 0x625000046100 at pc 0x00000082818f bp 0x7fff7b09bd10 sp 0x7fff7b09bd00
READ of size 8 at 0x625000046100 thread T0 (reactor_0)
#0 0x82818e in vfio_user_dev_quiesce_resume_done /spdk/lib/nvmf/vfio_user.c:2147
#1 0x782cc0 in subsystem_state_change_done /spdk/lib/nvmf/subsystem.c:634
#2 0xad047b in _call_completion /spdk/lib/thread/thread.c:2344
#3 0xabc48d in msg_queue_run_batch /spdk/lib/thread/thread.c:710
#4 0xac0670 in thread_poll /spdk/lib/thread/thread.c:926
#5 0xac0ead in spdk_thread_poll /spdk/lib/thread/thread.c:986
#6 0x9a5b4f in _reactor_run /spdk/lib/event/reactor.c:920
#7 0x9a6442 in reactor_run /spdk/lib/event/reactor.c:958
#8 0x9a717c in spdk_reactors_start /spdk/lib/event/reactor.c:1060
#9 0x99884a in spdk_app_start /spdk/lib/event/app.c:643
#10 0x407e82 in main /spdk/app/nvmf_tgt/nvmf_main.c:75
#11 0x7f822095ff42 in __libc_start_main (/lib64/libc.so.6+0x23f42)
#12 0x407abd in _start (/spdk/build/bin/nvmf_tgt+0x407abd)
0x625000046100 is located 0 bytes inside of 8320-byte region [0x625000046100,0x625000048180)
freed by thread T0 (reactor_0) here:
#0 0x7f82219ff91f in __interceptor_free (/lib64/libasan.so.5+0x10d91f)
#1 0x837059 in _free_ctrlr /spdk/lib/nvmf/vfio_user.c:2976
#2 0x837327 in free_ctrlr /spdk/lib/nvmf/vfio_user.c:2996
#3 0x843541 in nvmf_vfio_user_close_qpair /spdk/lib/nvmf/vfio_user.c:3742
#4 0x7d1d91 in nvmf_transport_qpair_fini /spdk/lib/nvmf/transport.c:604
#5 0x7ad922 in _nvmf_qpair_destroy /spdk/lib/nvmf/nvmf.c:1055
#6 0x761362 in nvmf_qpair_request_cleanup /spdk/lib/nvmf/ctrlr.c:4026
#7 0x761906 in spdk_nvmf_request_free /spdk/lib/nvmf/ctrlr.c:4041
#8 0x75a931 in nvmf_qpair_free_aer /spdk/lib/nvmf/ctrlr.c:3576
#9 0x7ae626 in spdk_nvmf_qpair_disconnect /spdk/lib/nvmf/nvmf.c:1127
#10 0x83db36 in _vfio_user_qpair_disconnect /spdk/lib/nvmf/vfio_user.c:3433
#11 0xabc48d in msg_queue_run_batch /spdk/lib/thread/thread.c:710
#12 0xac0670 in thread_poll /spdk/lib/thread/thread.c:926
#13 0xac0ead in spdk_thread_poll /spdk/lib/thread/thread.c:986
#14 0x9a5b4f in _reactor_run /spdk/lib/event/reactor.c:920
#15 0x9a6442 in reactor_run /spdk/lib/event/reactor.c:958
#16 0x9a717c in spdk_reactors_start /spdk/lib/event/reactor.c:1060
#17 0x99884a in spdk_app_start /spdk/lib/event/app.c:643
#18 0x407e82 in main /spdk/app/nvmf_tgt/nvmf_main.c:75
#19 0x7f822095ff42 in __libc_start_main (/lib64/libc.so.6+0x23f42)
previously allocated by thread T0 (reactor_0) here:
#0 0x7f82219fff16 in __interceptor_calloc (/lib64/libasan.so.5+0x10df16)
#1 0x837413 in nvmf_vfio_user_create_ctrlr /spdk/lib/nvmf/vfio_user.c:3010
#2 0x83bc68 in nvmf_vfio_user_accept /spdk/lib/nvmf/vfio_user.c:3313
#3 0xabfbd8 in thread_execute_timed_poller /spdk/lib/thread/thread.c:872
#4 0xac0c75 in thread_poll /spdk/lib/thread/thread.c:960
#5 0xac0ead in spdk_thread_poll /spdk/lib/thread/thread.c:986
#6 0x9a5b4f in _reactor_run /spdk/lib/event/reactor.c:920
#7 0x9a6442 in reactor_run /spdk/lib/event/reactor.c:958
#8 0x9a717c in spdk_reactors_start /spdk/lib/event/reactor.c:1060
#9 0x99884a in spdk_app_start /spdk/lib/event/app.c:643
#10 0x407e82 in main /spdk/app/nvmf_tgt/nvmf_main.c:75
#11 0x7f822095ff42 in __libc_start_main (/lib64/libc.so.6+0x23f42)
SUMMARY: AddressSanitizer: heap-use-after-free /spdk/lib/nvmf/vfio_user.c:2147 in vfio_user_dev_quiesce_resume_done
Change-Id: Icf5e5b360b9107a3c5eb960ae59b7fe10ace1c66
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11420
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are errors occur that uninitialised value created by a stack allocation when running unittest_accel and unittest_nvme_rdma with valgrind.
Change-Id: I4b48b472cc7c189cbcaf8ca772830a23118e7e17
Signed-off-by: Jaylyn Ren <jaylyn.ren@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10559
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Next patches enable memory domains async pull/push
functionality.
Previously buffer from internal bdev pool was passed
as func argument to bdev_io_get_buf_complete. Now
since bdev_io_get_buf_complete can be called
asynchronously, this buffer is stored in
bdev_io->internal.buf
Also move bdev_io_get_buf_complete up in file
to minimize changes in next patches
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I6e9d3b35dc85e0e88703dd24a4b4da837adc5b74
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11165
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
test/bdev/bdevperf/bdevperf.py invokes a process to perform test case
rather than processing RPC.
run_test_pid may be a better name than rpc_pid.
Besides, if the execution of the test hung up, try.txt is helpful to
investigate the cause. So print try.txt if the execution of the test
fails.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Iab973f55dde2ef793fc0d3f1a36b3b59b168f579
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11400
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In a test case, test/nvmf/host/failover.sh, we got ANA error even if
the target did not enable ANA reporting.
We marked the corresponding namespace as ANA state updating but we had
no way to clear it.
Check if we can read ANA log page before setting the flag.
If read ANA log page failed, disable ANA feature until the nvme_ctrlr
is created again. In this operation, all ana_state_updating flags are
cleared.
Fixes#2335
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I4e2608a35d9dfa0395ad74fceebae9faf8cd973c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11399
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
if ctrlr->listener was NULL, nvmf_ctrlr_get_ana_state() returned
inaccessible even if ana_reporting was disabled. Then the corresponding
initiator received unexpected ANA error and could not process it
appropriately.
Change nvmf_ctrlr_get_ana_state() to return optimized always if
ana_reporting is disabled.
Additionally, check if ctrlr->listener is not NULL before calling
SPDK_DTRACE_PROBE3().
Fixes#2335
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ib2376694cf89d85ec5687fba7e87439f494f30b0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11402
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
it shall be executed on ctrlr's thread not subsystem's
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I58c60525191085d3d6a583862ba5d71ea90940c7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11105
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When printing metadata pages, blobcli could print the start LBA to aid
someone that needs to debug with dd and od.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I380bd923dfcd1149e3f705dd0ec0ab46b1000019
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11260
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When blobcli is printing blob metadata, extent tables are now printed.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ie748a2f2b3fbc3e6e5ee06a0f2eb9bd491bfed46
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11259
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When printing blob metadata via blobcli, descriptor types that do not
have full dump support should not be silently ignored. This prints a
message that indicates an unsupported descriptor type was encountered
so that the person debugging with blobcli knows that there is more
metadata present.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Id30b671fd9dee1ec12e10625eb2af4c1e43eda27
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11258
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When blobcli prints blob metadata, it will now Print invalid_flags,
data_ro_flags, and md_ro_flags when printing blob metadata. The
complete mask is printed as well as the meaning of each bit or set of
bits. If unknown bits are set, that will be indicated in the output
as well.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I743a843a5d23b0e81c04482304515ab3c3b4c7bc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11257
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
nvmf_vfio_user_sq->size and ->qsize both hold the number of entries in
the queue; merge them.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I6c7c2984cbdf90079eec9222e1acbedb92207308
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11297
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
