Add support in bdev_zone.h for getting the maximum zone append data
transfer size.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I61203e64d51601232c6578a090fa52975364c1f3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6910
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
bdev_zone.h already has support for offline in enum spdk_bdev_zone_state.
Therefore, a user can call spdk_bdev_get_zone_info() and see that a
zone is in state offline, but the user has no way of putting a zone
in that state.
Add SPDK_BDEV_ZONE_OFFLINE to enum spdk_bdev_zone_action, so that a
user can call spdk_bdev_zone_management() to put a zone in zone
state offline.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I733a815949d7db0fdce293ba0d762e75a545ba76
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6909
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The NVMe Zoned Namespace Command Set Specification has, in addition to a
Max Open Resources limit, a Max Active Resources limit.
An active resource is defined as zone being in zone state implicit open,
explicit open, or closed.
Create a function spdk_bdev_get_max_active_zones() in the generic SPDK
zone layer, so that this limit can be exposed to the user.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I6f61fc45e1dc38689dc54d5649c35fa9b91dbdfc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6908
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add a new zone state to represent an explicit open zone.
Many zoned specifications like ZBC/ZAC/ZNS have two different
zone states to represent an open zone: explicit open and
implicit open.
In e.g. ZNS, a zone is transitioned to explicit open when a
Zone Management Send is sent with a zone send action of open zone.
In ZNS, writing to e.g. an empty or closed zone, without first
sending a zone send action of open zone, will instead transition
the zone to implicit open.
The OCSSD specification only has a single open zone state.
In OCSSD, you can only transition to the open state by doing a write.
There is no separate function call to transition a zone to the open
state. Therefore, the OCSSD open state is most similar to the ZNS
implicit open state.
Since we cannot remove the SPDK_BDEV_ZONE_STATE_OPEN identifier,
for backwards compatibility reasons, make the SPDK_BDEV_ZONE_STATE_OPEN
identifier an alias to the new SPDK_BDEV_ZONE_STATE_IMP_OPEN identifier.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I98f3a280cd9e595100155568a3c0332c667a834b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6907
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Assign values to enum spdk_bdev_zone_state.
This change will simplify a follow-up patch that will add new
identifiers.
If the first enumerator has no =, the value of its enumeration constant
is 0.
No functional change intended.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I1dc1cbcf262a8c6384a7133042f864074e1b992c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6906
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This change refactors the way nvmf_get_stats RPC works.
The RPC layer passes JSON write context to custom dump function defined within transport ops.
The RPC layer no longer needs to know the structure of transport poll group statictics.
Functions and structures used in the previous flow have been deprecated and will be removed.
JSON returned for RDMA transport should be the same as before this change.
Signed-off-by: Maciej Szulik <maciej.szulik@intel.com>
Change-Id: I03308c45be120793d316bf79814a1295afd9fb95
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6681
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This API has been deprecated since SPDK 20.07,
see commit (b2947f52).
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Idb45906c81ea5682c6a67def0265910266d861b5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6629
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Purpose: To setup an accelerated function callback
for created spdk_nvme_poll_group. In this patch,
we just create the interface. The real usage of this
call back will be provided in the other patch.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I0d936aa4eba4dbfcc0137942156b9f2919eb5b78
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6758
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
A very heinous error case is when a delete_io_sq or
delete_io_cq command fails when freeing a PCIe IO
qpair. In that case we return an error to the caller,
and the resources are not freed.
Instead of trying to 'fix' this error case, let's
just tell the user that if freeing an IO qpair fails,
the user should reset the controller and try again.
Resetting the controller will do one of two things:
1) The subsequent create_cq/create_sq will succeed,
at which point, trying to delete again should work
fine. (If it doesn't, it indicates some kind of
horrendous SSD.)
2) The subsequent create_cq/create_sq will fail,
at which point the entire ctrlr would fail and
need to be detached. This could result in some
leaked memory, but seems unavoidable.
Closes issue #716.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I218564080abec4d6b5ac0b861869ebfc7d99f2c3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6918
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
When ns set OPTPERF to 1, use NPWG and NPWA to set sectors_per_stripe.
Signed-off-by: sunshihao <sunshihao@huawei.com>
Change-Id: Iaf72ba5a7f21b33c357fba8deced9616e0bfaca6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6613
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The space should not be there. The doxygen
will not generate proper docs with it.
Change-Id: Id7e6fb2228abf1717e7e4097a9454c7820884655
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6881
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_vbdev_register() was deprecated in SPDK 19.04.
config_text field in spdk_bdev_module was deprecated in SPDK 20.10.
spdk_bdev_part_base_construct() was deprecated in SPDK 20.10.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib795ccdf61154c168032ccf8b81ea77e5e663851
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6628
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This statistic is incremented when we don't reap
anything from the CQ. Together with the total number
of polls it can be useful to estimate idle percentage.
Change-Id: I61b51d049b0bc506fb8a896e225187e46e75a564
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6295
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Leverage SO_INCOMING_CPU to get the CPU affinity of connections
(sockets). And allocate the connections to specific poll groups,
which aims to utilize cache locality.
From our test:
6 P4600 NVMe on target,target uses 8 cores, NIC irqs are bound to
these 8 cores, and initiator side uses 24 and 32 cores,
we can get 11%~17% randwrite performance boost for posix, and 8%~12%
for uring.
Change-Id: I011e0a21502c85adcccd4a14fbe9838b43f54976
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5748
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
max_delay_us was deprecated in SPDK 19.04.
config_file was deprecated in SPDK 20.10.
master_core/pci_blacklist/pci_whitelist were deprecated in SPDK 21.01.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie8be4c347de58044a7c3d5b1329d96e47ce084b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6594
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The fields were deprecated in SPDK 21.01.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If6b946024bf1ce4c106cdf493bcb5662a3b21b13
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6592
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add a function to get the number of max active zones for a zoned
namespace.
The value inside the identify namespace struct is a 0's based value,
where 0xffffffff means unlimited.
If unlimited, the addition will overflow and return 0,
which is the intended value to represent unlimited for this API.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ia09e3db157ca0afadbd3ca4032eedd7bcd88248c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6443
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: sunshihao <sunshihao@huawei.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add a function to get the number of max open zones for a zoned
namespace.
The value inside the identify namespace struct is a 0's based value,
where 0xffffffff means unlimited.
If unlimited, the addition will overflow and return 0,
which is the intended value to represent unlimited for this API.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I4223146bc1ddf90486892a0af5fe5ce006dc5fd3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6442
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: sunshihao <sunshihao@huawei.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch provides two new accelerated crc32c function interface.
And the next patch will be used to add the real support of chained crc32c feature.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I3f8dd55c3da636e29e5fb02fc229b51f05653cd6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6456
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We already have support for spdk_nvme_zns_zone_append(),
add support for spdk_nvme_zns_zone_appendv() (zone append with
NVME_PAYLOAD_TYPE_SGL).
_nvme_ns_cmd_rw() currently performs verification of the SGL,
if the parameter check_sgl is set. This parameter is set for all
calls with payload of type NVME_PAYLOAD_TYPE_SGL.
In order to be able to perform the same check_sgl verfication on
zone append vectors, we need to refactor _nvme_ns_cmd_rw() a bit.
Setting check_sgl ensures that _nvme_ns_cmd_split_request_sgl() or
_nvme_ns_cmd_split_request_prp() gets called.
These functions will split an oversized I/O into several different
requests. However, they also iterate the SGE entries, verifies that
the total payload size, total SGE entries is not too many, and that
buffers are properly aligned. A proper request will not get split.
For zone append, splitting a request into several is not allowed,
however, we still want the verification part to be done, such that
(e.g.) a non first/last SGE which is not page aligned, will cause
the whole request to be rejected.
(In the case of spdk_nvme_ns_cmd_write(), a non first/last SGE which
is not page aligned will instead cause the request to be split.)
An alternative would be to try to rip out the verification part from
_nvme_ns_cmd_split_request_sgl() and _nvme_ns_cmd_split_request_prp().
However, that is non-trivial, and would most likely end up with a lot
of duplicated code, which would easily get out of sync.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I2728acdcadeb70b1f0ed628704df19e75d14dcca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6248
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Sometimes it is more optimal to get the zone size in number
of sectors, instead of in number of bytes.
Therefore, add a new spdk_nvme_zns_ns_get_zone_size_sectors()
function to get zone size in number of sectors.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I0fe67e00a3d74dd27acfc895ae97448d995b89a3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6416
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Make enum spdk_nvme_ns_flags more readable.
Other enums in spdk, e.g. enum spdk_nvme_ctrlr_flags,
and e.g. enum NVME_RDMA_COMPLETION_FLAGS, already define
the enum values using bit shifts.
Do the same for enum spdk_nvme_ns_flags.
No functional change intended.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ia78ab0bab6fa37d700178d5b2669feb5a3003871
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6383
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Identify application prints the PMR details if it is supported
Signed-off-by: Krishna Kanth Reddy <krish.reddy@samsung.com>
Change-Id: Iaba4c15e18e1402035b11a34b2defe8078855751
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6209
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Aspects of bit fields are 'implementation defined'. On some platforms
alignment will occur if two adjacent fields are of different types. This
occurs in spdk_nvme_feat_async_event_configutation after the crit_warn
member which is effectively an int8_t, followed by an int16_t. There
isn't a generic way of changing the compiler's behaviour, so the best
options are:
- Change crit_warn to a uint32_t bit field and copy the value to/from
a spdk_nvme_critical_warning_state variable to use it. This requires
changes to code using the field.
- Adjust the structure definition to use smaller types to avoid the
problem. This preserves existing semantics, but the field order will
need to be reviewed if big-endian support is ever added (other places
in nvme_spec.h will need similar attention). A second reserved field
is required.
Use smaller types which seems the most straightforward option. Adjust
the use of the spdk_nvme_feat_async_event_configuration reserved fields
in lib/nvmf/ctrlr.c.
The new structure is binary compatible and the fields behave in the same
way, with the exception of an additional reserved field, so updating
CHANGELOG.md probably isn't necessary.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I7d8163c84b4f410fc95a5b7064506ad7b4b62c6c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6340
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
While zone append is very similar to write, we should refer
to the proper I/O command.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I85dc2634eefb502dd38351ca02d9b09a15c5620f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6245
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
This function allows applications to specify whether
they wish to allow probing a newly attached NVMe
PCIe SSD.
The env layer will only even probe devices that have
been allowed. By default, this is all devices, but
if the user has specified some list of
allowed PCI addresses (via spdk_env_opts pci_allowed)
then newly attached PCIe devices are implicitly not
allowed. This API allows applications to add
device addresses to the allowed list after the
application has started.
This API will be useful for use cases where multiple
SPDK processes are running on one server, and assignment
of PCIe SSDs to those processes are based on some function
of the SSD's PCIe address.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I919bc267f2ad9130ab5c875ff760a301028b047e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6184
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
The env layer has a pci_allowed list, which specifies
that only a subset of PCI devices may be attached
by the associated process.
But that doesn't cover PCI devices that are hot-inserted
after the application starts, which is common for
storage/NVMe.
So add a new spdk_pci_device_allow() API which allows
an application to add new devices to the allowed list.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7bd5ff428d84480d46bc236698daadd019b20b8e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6183
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
For flow control reasons we have to resize the bit arrays we
use to manage flow as channels come and go. However since
channels are assigned to devices, until the channel count
reaches the device count there's no sharing so no resize of
the array is needed. So, when we use a device for the first
time there's no need to run through the rest of the channels
and re-balance.
Same thing is done on destruction. The code to free idxd
specific resources was moved from the rebalance function to
the idxd put channel function which is a much more logical
place for it as well.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ib4df163286906f413dd6429dc6833af7b68e208c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5846
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch is used to add spdk_nvme_poll_group_get_optimal
public API.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Iee34c89e0e1ff1f81167b18e198c144ca28f71de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3311
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is first commit that should go into latest SPDK
after the code freeze for SPDK 21.01.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ieeef261f4a83183946358916a084fef886339d83
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6052
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Additionally, the user can specify a namespace to also pause during the
operation.
This allows for the management of hosts, listeners, and the addition of
namespaces all while I/O to other namespaces is occurring. Pausing a
specific namespace also allows for the removal of that namespace without
impacting I/O to other namespaces in the subsystem.
Change-Id: I364336df16df92fe2069114674cb7a68076de6fb
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4997
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The Zone Append command is an optional command in the Zoned Namespace
Command Set.
Zone Append differs from a regular write, in that the command is not
given an exact LBA of where to write the data.
Instead the user has to set the zslba field to the start of a zone,
and the data will be appended to that zone.
The actual LBA where the data was stored is returned in the
spdk_nvme_cpl, where Dword0 contains 31:00 of the ALBA field,
and Dword1 contains bits 63:32 of the ALBA field.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Iabae1b3456bfbb62c07b63d79afe9a14e460fe83
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6013
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
PIREMAP is defined as bit 25 in Command Dword12 for the zone append
command.
Bit 25 in Command Dword12 is still reserved for regular reads/writes.
PIREMAP determines the contents of the reference tag written to the
media.
If cleared to 0, then the controller writes the reference tag
per the NVMe Base specification without modification.
If set to 1, Reference Tag[0] = ILBRT + (ALBA - ZSLBA).
Media Reference Tag[n+1] = Media Reference Tag[n] + 1.
As defined in Zoned Namespaces Command Set Specification,
section 4.5.1.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I984ca00146baf6af61208e3598c833f1ec4708bb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6012
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When NVMf target linked with vfio-user library, we can use
vfio-user client library to connect to the target.
Here is the three examples that can work with target:
identify -r 'trtype:VFIOUSER traddr:/var/run/muser/domain/muser0/8' -g
perf -r 'trtype:VFIOUSER traddr:/var/run/muser/domain/muser0/8' -g -q 1 -o 4096 -w read -t 10
reconnect -r 'trtype:VFIOUSER traddr:/var/run/muser/domain/muser0/8' -g -q 32 -o 4096 -w randrw \
-M 50 -t 10 -c 0xE
You can run the following test script test/nvmf/target/nvmf_vfio_user.sh to have a quick test,
currently enabled with NVMe Identify,Perf,Reconnect tools.
Change-Id: Ieb9842b2f372184fffbf7f23e4aad26feb47c350
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3839
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The new custom transport can enable NVMe driver running with
NVMe over vfio-user target.
Change-Id: I5f90e8516eaca08fc3eab658b29b760a03326ff7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5996
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add two async API for Directive Send and Directive Receive.
spdk_nvme_ctrlr_cmd_directive_send;
spdk_nvme_ctrlr_cmd_directive_receive;
Signed-off-by: sunshihao <sunshihao@huawei.com>
Change-Id: Icb6974f74902df1512a5ffa9835188132634291b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5803
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
According to kernel, use an inline function spdk_nvme_bytes_to_numd
to transfer paload_size form bytes to numer of dwords.
Signed-off-by: sunshihao <sunshihao@huawei.com>
Change-Id: I8b9ded122bbf4a3c8e46988993ea52404783c0b0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5926
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This helps user to locate whether bdev_io fails in
spdk bdev layer or inside Linux AIO.
SPDK_BDEV_IO_STATUS_AIO_ERROR indicates bdev_io fails
due to Linux AIO or its lower layer's failure.
New functions spdk_bdev_io_complete_aio_status and
spdk_bdev_io_get_aio_status can be used to report out
the errno from Linux AIO.
Change-Id: I32640e4a0459cca057278c02ea5a7522f3408a02
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5690
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add spdk_bdev_wait_for_examine() API to be called
in order to report when examine on all registered bdevs finished.
It will be built in to most bdev modules RPC.
New RPC added to allow
- building it into bdev submodule
- user/orchestration to verify examination status manually
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I27db3ae42eea3e692faeea4c2a01d04586bff438
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5480
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
