Number of microseconds is sufficient in almost all cases,
so don't print out the TSC offset unless user specifies
-t option.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3bbf55204bf58d94f43161ff41c565ca92e218f7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452737
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was not used by any of the trace register descriptions.
Let's remove it rather keeping it around if we don't need it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idda809e2911db5be555ff6aa13695484a14bf665
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This requires changing arg1_is_ptr to arg1_type.
We will use this to print the first 8 characters of
a blobfs filename when collecting event trace data.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1b321d99145e82b42dcf6d901ce9d6298158edae
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452259
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For trace file which is generated by spdk trace_record,
if one lcore recorded no entries, there is no space for
it to have idle entries to referring.
Change-Id: I1cd89ec934407fc805bda66c8c87f76cb181679e
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449840
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously, copying trace-file from disk or page-cache
to memory aims to accelerate disk-read in one large
sequential read.
But it shows no value, since trace-data are originally
retrieved sequentially, and page-cache can handle it
well.
Change-Id: I1c328286686ed05e83f3b7a1bef10dc353c5b653
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449839
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Found while trying to process a file that wasn't completely
written yet - it would SIGBUS instead of printing an error
message.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I56d60519f0608900697102c06310ebb92ec4d39c
Reviewed-on: https://review.gerrithub.io/c/441988
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Just have file_name point to shm_name when we're processing
shared memory. This will be more helpful with the next
commit that adds more error messages.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7c50ea0c16c6ced0a1aed59b225cb29d0f7b7345
Reviewed-on: https://review.gerrithub.io/c/441987
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This is just a copy of spdk.app.mk for now. But later
patches will modify spdk.app.mk in a "C-specific" way,
so add this cxx variant to use now in the C++ apps.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0d4d28c6119364d4c3cc7fa5274598b69f4ee6b1
Reviewed-on: https://review.gerrithub.io/434279
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I9449d40ff31039f3f59bc60c956592e0e565437a
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/435114
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
With the trace_size records for each lcore, spdk_trace
can read trace_file in which each lcore has different
number of trace entries.
Offset of each trace_history from the beginning of this
data structure.
Change-Id: I06afaba129812fe40ed000265fc66b02c5d9e3d9
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/433503
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Number of trace entries in circular buffer per lcore can be
assigned by the boot parameter of SPDK app with
"--num-trace-entries <NUM>"
Change-Id: I855ce6b4f14a716dcdd9078913da5ea8e577af3a
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/433099
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In case when only file_name was provided,
app_name was still dereferenced.
Change-Id: Ica948e072ef02a8daadf303b3e2a004640d19000
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/433609
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Remove the calculation of g_last_tsc. This was erroneously
cutting out valid data - for example, when reactor X has
an event that happened very early on, then reactor Y fills
its buffer before reactor X has another event. All of reactor
Y's data would be ignored until reactor X processed another
event.
While here, remove some code that should have been removed
as part of the fudge_factor removal. Also use SPDK_COUNTOF
to simplify calculation of the number of entries per
reactor buffer.
Reported-by: John Kariuki
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I16c7f80cbfc8b4bb5f90a195d30df69e07b4ff85
Reviewed-on: https://review.gerrithub.io/424615
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
While here, clean up the trace application output based
on some debugging done with these tracepoints.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaf79f0ff8c80d0a6b9768ae0da213d57e98ec552
Reviewed-on: https://review.gerrithub.io/424286
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This was added a long time back for tracking an rte_mbuf
whose buffer was a different rte_mbuf - all related to
a userspace TCP stack that is no longer in development.
The concept isn't useful now, so remove it to reduce
the complexity of the tracing code.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I310e492eba7f55df242bb29d82fb19f6daee1f51
Reviewed-on: https://review.gerrithub.io/424565
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This allows for offline debugging with a tracepoint
file - you can copy the shared memory file out of
/dev/shm to a normal file, then pass that in to this
trace app.
Note: Linux puts shared memory files in /dev/shm which
makes it easy to copy to a regular file. FreeBSD does
not expose shared memory objects in this way - so for
now this capability to debug tracepoint files offline
will be limited primarily to Linux.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I046b71bdd65cab5a76500775838a5072bec8da39
Reviewed-on: https://review.gerrithub.io/424284
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This was added a very long time back to debug this trace
app itself - it's no longer useful. Plus removing it
reclaims the -f flag which we'll use next to specify
a filename for decoding a tracepoint file offline.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4fb2352187e6f89e0bd77d01589762f734e4d359
Reviewed-on: https://review.gerrithub.io/424283
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This ensures the per-event arguments are always lined
up in the output.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I89ccc10e5ab5653562d598f7c0e5bf495becdf01
Reviewed-on: https://review.gerrithub.io/424281
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Id3eaf1d0a4216d0bea618821ffe5456f4e07f4b9
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/416917
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
It is not ideal to have to add this in a bunch of
different Makefiles, but further consolidation of
Makefiles is going to be a more arduous process.
With this change, rebuilding SPDK after no changes
will result in no output - all of the "Nothing to
be done for 'all'" messages have been removed. Note
that DPDK build output still remains - this can be
suppressed by either using an out-of-tree DPDK, or
using SKIP_DPDK_BUILD=1 when using the in-tree DPDK
submodule.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib1d45432f2baaa1d9c1b9509906ee1e77966d3ca
Reviewed-on: https://review.gerrithub.io/399918
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Only Makefiles for libraries that directly depend on DPDK (rather than
the SPDK env abstraction) should add $(ENV_CFLAGS).
Change-Id: Ifdf44d3ef8c42bbf7f20edd524b330d00658235b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/392818
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Require braces around all conditional statements, e.g.:
if (cond)
statement();
becomes:
if (cond) {
statement();
}
This is the style used through most of the SPDK code, but several
exceptions crept in over time. Add the astyle option to make sure we
are consistent.
Change-Id: I5a71980147fe8dfb471ff42e8bc06db2124a1a7f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/390914
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibe31b961fec36644cf64716c512429d68e873e88
Signed-off-by: Ed rodriguez <edwinr@netapp.com>
Reviewed-on: https://review.gerrithub.io/386170
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will be used to include common app-specific rules in upcoming
patches (it currently makes no difference).
Change-Id: Ia828ba01c94fc9f70e15db3fc1d9cafda387e912
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/387629
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
By default, all SPDK applications will not share memory.
To share memory, start the applications with the same
shared memory id.
Change-Id: Ib6180369ef0ed12d05983a21d7943e467402b21a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This allows users to swap out SPDK's third party
libraries for an implementation based on their own
framework.
Change-Id: Ia0b7384ce5e31acba5ad0d7002dec9e95b759c52
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Make sure the trace history that is exported via shared memory is always
the same size, regardless of DPDK configuration.
Also removes the necessity of including DPDK headers from spdk/trace.h
(so we have to fix up other files to include what they use).
Change-Id: I32f88921fd95c64a9d1f4ba768ae75e2ca5d91da
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Simplify the build rules so that common libraries are always linked.
Also fix up a couple of -lpciaccess instances that should have been
changed to $(PCIACCESS_LIB).
Change-Id: I4c50fa3aa59cae013d3385e38fbb830794299f6e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add the '/' prefix to the trace shm name.
Change-Id: I4cf1011b639f299314ea379ba3fb626f5c2c787a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
