For iWARP devices, buffers that are intended to be the
target of an RDMA read initiated by the target must additionally
have IBV_ACCESS_REMOTE_WRITE permission. This is because iWARP's
RDMA read path essentially requests the remote side to do
an RDMA write.
This is unfortunate because there is no way to differentiate between
memory that the remote side can do an RDMA write to and memory
that will only be the target of RDMA reads initiated by the
target. There is nothing we can do about this serious deficiency in
the specification, however, so we have to live with it.
Change-Id: I3d2f2814ce0cb1df4e5347296ef371db4d16be21
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This patch adds support for spdk_bdev_readv in scsi layer.
It also fixes write so that it uses multiple iov's instead of one.
Currently we should use only task->iov (for single vector operation)
or task->iovs (for multiple vector operations).
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ia3b2f6d18fd212b11d7b63b11dc46ec5bbc74788
Make the quirks mechanism generic in preparation for quirks for devices
from other vendors.
Change-Id: Ic003b020a38f1b966021db30e3f2bce9cf6a1a0d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch removes reduntant field in spdk_scsi_task and
fixes all logic to use iov.iov_base
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ie2fa1e2357b6383c118d05aec9206d1c60537d40
This makes it easier to search logs on test
boundaries.
Change-Id: I4500479cb8c8322d5ba73bbefd51e006cbb1e82a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Instead of using shell commands, use python to parse the output
of lspci. This is considered more "Pythonic".
Change-Id: I88ef0fe8cbfbcaa9c5d323552a82ef63e46f52cf
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Previously, if spdk_rpc_setup() returned early due to the RPC service
being disabled in the configuration file, it would leave itself
registered as a poller and continue to run for the life of the app.
Change-Id: I0532fe23a732b87d68f83847b2db7627f87e9a1c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
I believe this is required for NICs to report, but handle
the case where it isn't reported.
Change-Id: I38d10c3590d1df8bb902ab312af0f9e01b9e5032
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This makes it consistent with the way connections and
requests work.
Change-Id: Ifb97499ba72f7dfd02ac54ba1b622726d266262c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The shared memory pool for a session is associated with
a particular RNIC via the protection domain. New connections
attempting to join a session that came in on a different RNIC
can't use that memory, so must be rejected.
Change-Id: Ibd79fe90566a231f76b7472e5e9b484c3e528454
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Rearrange the functions in rdma.c to match the order
of the function pointers in the transport. No other
code changes.
Change-Id: I9dbc68912ecd5dfdf53f20b4807d4116933a3c3a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Use the lower level registration functions. The RDMA-CM
examples use the ibv_* versions, so who knows if the
rdma_reg_* wrappers are even well tested.
Change-Id: I8e8250ab09a1401e636aebe2fc04a60806f7a827
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Add a transport function to get the max data transfer size to break the
dependency on NVME_MAX_XFER_SIZE.
Change-Id: I846d12878bdd8b80903ca1b1b49b3bb8e2be98bb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move the PCIe-specific admin queue setup to nvme_pcie_ctrlr_enable.
Change-Id: Ic3f5625fa804f719040ba86b7fc3bf82fcc057c0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously, we mixed use free and spdk_nvmf_rdma_conn_destroy to
free allocated spdk_nvmf_rdma_conn structure, which sounds not
exactly free all the resources.
Change-Id: I2917b442c34d63ba5c014add58f429ae4b831595
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The RDMA API doesn't say whether the wr is copied, so be
safe and allocate it on the heap.
Change-Id: I091af50aa031e1861333f19d864eb52335d6b756
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
A status member of spdk_bdev_io structure is set after the if block.
Therefore a status parameter should be checked instead of a status
member.
Change-Id: I4030a7fcdb36d9c589802ec5b4e424591dc2a3b6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The value of CAP should not change during the lifetime of a controller,
so read it once during ctrlr_construct and store it in the ctrlr.
Change-Id: I089d4141b4e0c9aae6c53abf9bb0ef6577dabe0b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rather than embedding adminq directly in the spdk_nvme_ctrlr structure,
change it to a pointer to a spdk_nvme_qpair. This is necessary to allow
the transport to extend the qpair structure.
Change-Id: I041685d5037088cf56d046fe99bf204edcfc57b1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously, we directly assigned the pointer of pool_name
and rbd_name, and this is not safe. After the rpc test,
we found the string value is not correct, so use strdup.
Change-Id: Ibadc57d3cb5b9869b7db5a22c2459769e92edebd
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
This requires a couple of related changes:
- I/O queue IDs are now allocated by using a bit array of free queue IDs
instead of keeping an array of pre-initialized qpair structures.
- The "create I/O qpair" function has been split into two: one to create
the queue pair at startup, and one to reinitialize an existing qpair
structure after a reset.
Change-Id: I4ff3bf79b40130044428516f233b07c839d1b548
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Also continue checking for errors after a problem has been found.
Change-Id: Iea37311e54f68fb6ba8c804ad4b2fb92d5238f36
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make the transport ctrlr_construct callback responsible for allocating
its own controller.
Change-Id: I5102ee233df23e27349410ed063cde8bfdce4c67
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Four read/write functions share the same code for checking
IO len and offset. Extract this code into separate function.
Change-Id: I40f0021e70a60c591b048ad3a70b22eaa07af3b4
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
These are specific to local NVMe PCIe devices, so move them out of the
generic NVMe code into the PCIe transport.
Change-Id: Iea2056a4c438b7d3a303b4b5e977ce7aa9e58c05
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows the entire transport structure definition
to become private.
Change-Id: I9ca19edbfc3cfb75b9b113a89bb2b90bc499ab16
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This changes as little code as possible while still creating
a single public API header. This enables future clean up
of the public API and clarification of the exposed
concepts.
Change-Id: I780e7a5a9afd27acf0276516bd71b896ad301c50
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
