We've now supported ZCOPY io type and Malloc bdev will use
ZCOPY for the read/write operation. Add the support for the
test case of Malloc with ZCOPY operation.
Change-Id: I291fc9ef82b1eae800c97c5a6b7a0c810c357fe0
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/540
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The copy engine library, modules and public APIs have been renamed.
Use of the word `copy` has been replaced with the word `accel`
short for accelerator in preparation for adding new capabilities
in the future. Additionally, APIs for what was previously called
the `memcpy` engine have been renamed to identify the engine as a
software accelerator.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia607aa718416146fbba1e6792b8de0f66bd8a5de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Subsequent patches will call bdevperf_test() as callback to
bdevperf_construct_targets(). Changing return type of bdevperf_test()
to void and including its error handling will make the code cleaner.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I30fe38cfb73fbc593d079d5b66a540c0ce96fe19
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/636
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
_end_target() is an exception, and move just above bdevperf_complete().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2197a3b7ceb36ab29f0b69e31f3babd4e996f193
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/635
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Put rpc_perform_tests() next to bdevperf_run(). This will improve
readability a little.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8816a88be13e794f39ded3ff12e9a76e40c8282a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/514
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Remove two global variables and use variables per target instead.
g_min_alignment:
Bdevperf creates task on a target after creating the target, and
we has removed any limitation about alignment described in the comment.
Remove g_min_alignment and use each bdev's alignment to call
spdk_zmalloc() instead.
g_buf_size:
We had set the size of task->buf by not g_buf_size but g_io_size
by mistake. We have not used any global buffer pool and can use
buffer size per io_target instead.
Delete g_buf_size and add buf_size to struct io_target. Then
initialize target->buf_size in bdevperf_construct_target() and use it
instead of g_buf_size including the fix in
bdevperf_construct_task_on_target().
Besides, as a minor cleanup, remove duplicated initialization of
global variables in this patch. Global variables are already
initialized at their definition. Remove duplicated initialization
from main() function. It is ensured that global variables are
automatically zeroed but write initialized value expilcitly for
compatibility and clarification.
These will be helpful to parallelize targets and tasks management among
multiple threads.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iba23dec3e1da8810da7523da09bae858eb4484a2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/512
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use spdk_thread_send_msg() for notification of bdev hotplug
and test completion instead of spdk_event_call().
Each I/O target group is associated with SPDK thread now. Hence
use spdk_thread_send_msg() to do bdevperf_target_gone() on the
specified thread. The group is held in struct io_target by the
previous patchm and remove target->lcore safely because it is
not used anymore.
Then use spdk_thread_send_msg() to notify master thread.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I88eadbdd1f120161cf484793f14f5eb0b44d010f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478818
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Register the global bdevperf object as an I/O device by
spdk_io_device_register(). Create and destroy I/O target groups
asynchronously by using spdk_for_each_thread() and
spdk_for_each_channel().
spdk_for_each_thread() and spdk_for_each_channel() serialize the
execution among multiple threads, and any lock is not necessary.
Additionally, for bdevperf_submit_on_core() and
bdevperf_stop_io_on_core(), replace for their loop + event call by
spdk_for_each_channel() and rename them by
bdevperf_submit_on_group() and bdevperf_stop_io_on_group(),
respectively.
This advances the work to move bdevperf from core based to thread
based.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I63b512d0b8e734e862afe1f7a4053414b99204d7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478780
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds test for compare-and-write fused
command. First it runs successful call of compare
and write command and then it runs again and the
second run is expected to fail.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Iaf1151414c4dea16487e8c33630cbffb0c09ae3b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482606
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Now we can actually know which tests we are running on which bdevs when
we call blockdev.sh. Removing the conditionals from the configuration
setup (or failing if they don't succeed) and then calling run_test from
the top level allows us to reliably track the bdev tests and fail if
they don't run on a desired class of bdev.
Change-Id: I14e6e3d993b4af4995adcbc5f138bac4ae9d63be
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478247
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some bdevs don't support unmap so they may not be able to run the fio
unmap tests. In case none of the bdevs we are testing support this
operation, the test will be skipped.
Change-Id: I5063297f0378bc87abf50e5311d147251cfe0ad9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478337
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This allows us to run the NBD tests on any combination of bdevs
based on the flags passed to the script. Previously we ran the tests
on a specific grouping of bdevs and opted to only free one type (passthru)
over RPC after the test ran. Rather than free all bdev types in the new
implementation, I opted to not free any of them via RPC and rather allow
the application to close them at termination time.
Change-Id: I574db4f941bfbb073cceed4610e1f5d43028569f
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478246
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Just to make sure that we always test against a valid bdev.
Change-Id: I7c9786f32b8d5ff5f2bf9c86151fb7f2bdfdf5f3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478245
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Previously, we only ran bdevperf tests against GPT partitioned NVMe
drives. These tests are generally applicable and should be run against
all of the bdev types we support.
So long story short this configuration file isn't needed and we can just
get rid of it.
Change-Id: Ia6ded22ce16fc1f76b7d99643b9d37e3ecbd1c60
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478244
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will allow us to parameterize the blockdev.sh script and call it
individually from different jobs.
Change-Id: I8585c12dedfb1a32ea206a09a544440d2e794d4b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478242
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Previously, we conditionally ran one test in per patch, and another in
nightly tests. However, the only difference between these tests was the
configuration options sent to FIO. All other tests in the build pool
follow a pattern where they simply change the options and run the same
test in nightly and per-patch.
Following that pattern makes it easier to set a specific list of jobs
that must be run before a tet run is considered complete.
Change-Id: I6b2f49114155fdfa1d1e07faf45f03e64572eeb8
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481908
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
When RPC kicks the test and the test results in error, RPC response
should return error but bdevperf application should not return error.
RPC can kick the test multiple times, and if RPC kicks the test again
and it completes normally, RPC response should return success.
So reset g_run_rc to 0 after sending RPC response.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I59a7c06a293ba7f7b5caa8171bcfb54d736524da
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479914
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously bdevperf_free_targets() had freed not only io_targets
but also io_target_groups. This had made repeated runs by RPC
impossible. This patch series will fix this issue later but we
cannot wait for that and fix the issue now.
Fixes#1139.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I88cf5725579b704bc3826bd4c0b2dd9f4e70db30
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479912
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
_target_gone() and end_target() do almost same operations. We had
not unregistered pollers at the cases that sets target->is_draining
to true. The later had hit assert when the test ended with I/O error
before completion because when target->run_timer is expired,
end_target() would be called after target is freed. Hence we do
both in this patch.
Factor out the operations from _target_gone() and end_target() into
a helper function.
Then, when the target exits with error, unregister pollers of the
target immediately by replacing setting target->is_draining to true
by _end_target(target). We had seen the assert for a single case
but apply the fix for all cases.
Fixes issue #1140
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If39779817ed99c9441e368c1d4512c66d13d3378
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479911
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This also requires us to change the create_test_list function to rely on
the run_test function for creating the canonical test list.
Change-Id: Ib35e7752935a3ac83de2702b6dfbd42539027f6a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476962
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add struct spdk_bdevperf and include header of io_target_group list
in it, and then allocate its global instance g_bdevperf statically.
Rename g_head by groups for clarification.
The next patch will register g_bdevperf as SPDK IO device and
allocate io_target_group as context of the corresponding IO channel.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6755ce8cc05b00cbc0d5dc7983ec01fe3483f4cf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478779
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Remove a parameter from bdevperf_fini() and rpc_perform_tests_cb()
and they refer g_run_rc directly. This is a preparation to the next
patch to avoid introducing any dynamically allocated context.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I42f1c7e8bc662799b3fcbf2769139174bb527314
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478834
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We don't have ordering constraint between bdevperf_free_targets()
and sending RPC response. So extract bdevperf_free_targets() from
bdevperf_fini() and rpc_perform_tests_cb() and inline it into
bdevperf_test_done(). As a result of this change, bdevperf_fini()
calls just spdk_app_stop(), but is still necessary in the subsequent
patches. So keep bdevperf_fini().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie8ed2d04db754b8a265296932f73d3a602d1f90b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479373
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Factor out test finish operation of command line invocation case and
RPC invocation case. Then apply the new funciton bdevperf_test_done()
to all calls bdevperf_fini() or rpc_perform_tests_cb().
The purpose of this refactoring is as follows:
- Consolidating finish operation improves code readability and
maintainability, and may enable further improvement in future.
- The next patch will consolidate bdevperf_free_targets() from
bdevperf_fini() and rpc_perform_tests_cb() into bdevperf_test_done().
This refactoring is a preparation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I06801541e4c4ed28774debad56d901dbeb5a9193
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479372
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
io_target_group manages io_targets, and hence checking g_head
should be done earlier than checking g_target_count.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I112018d8f487b387ae5f4f444a342be2c8da167d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479350
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Change bool g_run_failed to int g_run_rc. If any error is detected
during bdevperf running, negative return code is directly set to
g_run_rc. Then g_run_rc is passed to rpc_perform_tests_cb() or
bdevperf_fini().
Besides, we had updated g_run_failed even after spdk_app_start()
returned. However return code of spdk_app_start() might not be of
bdevperf_run(). Hence change main() to return the return code of
spdk_app_start() simply without updating g_run_failed.
Additionally, even if g_target_count becomes zero in
spdk_bdevperf_shutdown_cb(), g_run_rc may indicate error. So,
change spdk_bdevperf_shutdown_cb() to pass g_run_rc to
bdevperf_fini().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia85680679087c3106ba687d7e58027ae8ff4a5c7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478833
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
bdevperf_fini() had expected to get one but rpc_perform_tests_cb()
had expected to get negative errno for any error. Using negative
errno will be reasonable and change the code accordingly.
The next patch will unify local rc variables and the global g_run_failed
by changing g_run_failed to g_run_errno.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia43da0793f8e77a5d5491758589e9b77f4cf86e7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478832
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a preparation to subsequent patches. They will make start
and stop of bdevperf asynchronous. Encapsulating free targets and
call app_stop() will be helpful for them.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1a86d787614be048cec66e5d5fcfeb85de843ad5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478817
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We will use SPDK application framework (SPDK thread, IO channel, and
etc) to manage IO target groups, and will need to free IO target
groups before exiting bdevperf application. As a preparation,
move bdevperf_free_targets() before returning from spdk_app_start().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id695a88107f87a9573c281f7f7d26d91d3a307b5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478778
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Due to the last patch, we can use rpc_perform_tests_cb() in
rpc_perform_tests() simply and remove the duplicated code.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id56da12fb5c52b6d178912f2f6cc7ead8a9cc36e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478761
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Subsequent patches will make bdevperf_construct_targets() asynchronous
and call bdevperf_test() as its callback. Moving g_target_count
check into bdevperf_test() will make the change easier.
As a result of this move, rpc_perform_test() is simplified a little.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I308ab472a0021278af1a1f5aa65268126a60673f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478760
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fix the issue that target->run_timer and target->reset_timer needed to
be called on the core which runs the target.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia36681ac51a46f272e5738d0ae63838939e71e28
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478712
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_put_io_channel() sends message if the core on which it is
called is different from the core which called spdk_get_io_channel().
However, ch->ref is guarded by mutex at free and we should call
spdk_put_io_channel() on the core which called spdk_get_io_channel()
as possible as we can.
Hence move spdk_put_io_channel() from end_run() to bdevperf_complete().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8816b28625869662c6b9124036b619b76bf96a3c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478709
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch changes io_target_group from array to linked list
and removes g_coremap.
In particular, change how to choose io_target_group for each
target, and reverse if condition in performance_dump(). These
changes will the code clearer.
Besides, remove blockdev_heads_destroy() because it just calls
bdevperf_free_targets() now.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I170a1c58fe2df9a11902224dd8634462a9af6123
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478565
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The role done by the variables has been replaced by lcore of
struct io_target_group. So we can delete them safely.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2ed856c8ccfda1d72b3fc97677fecaf295df37af
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478706
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Hold associated core ID in io_target_group and use it later.
This simplifies event calls in bdevperf because we don't need
to get core ID from io_target.
The next patch will delete g_coremap safely because io_target_group
manages lcore correctly now. lcore of the struct io_target will
be deleted too but it will be more later.
The subsequent patches will move bdevperf from core based to
thread based and the added core ID will be removed eventually in
this patch series. However these changes are helpful even so.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia763a79bc3810a15485285aebb9fc15a8d48332f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478705
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add struct io_target_group and chain associated io_targets to it.
Particularly, replace current target->next pointer by TAILQ, pass
not the head io_target pointer but the io_target_group pointer to
event call, and use TAILQ_INSERT_HEAD() in bdevperf_construct_target()
to keep the current ordering.
Besides, add pointer to the queued io_target_group to struct
io_target to use it later.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib37db825a863f7795c55c19fae0d38efd80c607e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478563
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
bdevio test tool is not critical but change it to use instance
of cpuset to spread statically allocation of cpuset throughout.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9722d491cb6ec3202312285013105f7b6aeb1f15
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478581
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Number of entries of the array g_head is spdk_env_get_core_count(),
and hence we did not need to break from some for loops. For them,
continue to the next iteration will be more appropriate and do the
changes in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6e97099622d58f44d92482beaf24ca61de4ca038
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478756
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Extract bdevperf_target_get_task() from bdevperf_submit_single().
Then inline the contents of bdevperf_prep_task() into
bdevperf_submit_single() and remove bdevperf_prep_task().
These two patches simplify a little weird nesting and parameter
passing of bdevperf_submit_single().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I37f4ca732d6d9479553365cd612b90dec51e2228
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478690
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
This patch and the next patch will simplify the nesting of task
submission.
Factor out the operation to get free task from io_target into a
helper function bdevperf_target_get_task(). Use
bdevperf_target_get_task() in bdevperf_submit_single() and
reset_target().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4cb147a5a6c84cc2b0e517dc35a106d37affaa10
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478689
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
We will be able to distinguish case and suite in the post process
scripts based on if they have any internal tests.
Change-Id: Iff2aa5caa251924d8a842085d87eb2a17aca45d4
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478522
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Other tools have already changed these units to IOPS and MiB.
Unify the units, that makes the result comparing more clear
with bdevperf and perf.
Signed-off-by: dongx.yi <dongx.yi@intel.com>
Change-Id: Iedc47f5757839e1abbcbaf5d97179c90ab130773
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478280
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Currently the blockdev.sh tests fail due to using a GPT partition on the
hello_bdev portion of the test. On some of the test machines, sgdisk is
not installed, so they silently fail to create the GPT partitions that we
were trying to use.
This change is only geared towards fixing the current nightly failure in
the bdev tests. It does not address the test machines silently failing to
create GPT partitions.
fixes: issue #1107
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: If58201ff4eb7dce9a44e2f93dfe25601ad1b508a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477611
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
