If the sock belongs to a polling group, we already have the mechanism
to do the write/flush work.
Change-Id: Ic15660717f4e83d873ec9f642ababd7fd9cda5eb
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5442
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Although '|| true' has been added in rpc.py bdev_nvme_opal_revert -b nvme0 -p test || true,
Backtrace also appears while running autotest.sh on none-opal nvme server.
Now using unique name for the controller in opal_revert_cleanup() can fix the issue.
Change-Id: Id65739f9d4c37e33817406a074350345a767e99c
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5366
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: <qun.wan@intel.com>
Save latency log only when needed (i.e. latency tests).
Otherwise in some condition (high IO tests) this may stress
fio too much and cause a crash or fio might just refuse
to run the job.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I61993d05ba91e88e9b6580d8ee39f255e1b09076
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5476
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
io_uring engine benefits a lot from these options
for better results.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I1fbc62b88e1726f4ea1569c6ee6997164a9d09a6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5475
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
At the same time the bdev supports optimal_io_boundary
and max_segment * max_size. Add a unit to test this
scenario.
Change-Id: Ied7c6cb9eefe0ab0c5a3469e9b184cb548a45f1b
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4928
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This unit test is for MAX_SIZE and MAX_SEGS
splitting IO.
Change-Id: I47278a9213986d8aa0e6db041b2795e595558498
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4820
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
When the backend device supports max segments and
max size, we may need to split the IO if the IO segment
size is bigger than max_size or iovcnt is bigger
than max_segments.
Add unit test for span split
Change-Id: If8e9c4f903b7def0ad7ddec7dc5aab8410498db5
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4602
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Delete connection code is scattered all over the place for
different scenarios. For FC-NVME2, we also need to have
ability to delete single connection at runtime. Cleanup delete
connection code and have a signle nvmf_fc_del_connection api that
can be used in all scenarios.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: I8d153681fd89dab8c4844b18f29c7e8f7caaa94d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5433
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
1) Create fc_req pool per fc connection based on SQ size. This gives more flexibity.
2) Remove create_max_aq_conns_test as it is not longer valid. We dont have any limit
on number of AQ connections based on the HW RQ size.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: I5c0b0d9ec9e9d63c7dccd76be7d6363a1f49c63e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5432
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
This patch is for packed ring live recovery.
First step is to track the packed ring descs.
This feature base on this QEMU patch:
https://patchwork.kernel.org/patch/11766697/
Change-Id: Id0ccb6fd12b3623cc367424f496b4ffc5323f390
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4126
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch is used to support ABI compatability issue for spdk_app_opts.
Fixes#1484
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I6fed777fa15b367f7c3706b8f218d86d56493906
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5330
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
If there is an unexpected exit in running blob_io_wait.sh,
error log will show as below:
bdev.c:5502:bdev_open: *ERROR*: Could not open aio0 - lvol module already claimed it
vbdev_lvol.c: 265:vbdev_lvs_create: *ERROR*: Cannot create blobstore device
Fixes#1718.
Change-Id: I28e2664689e41d088a00ea6a0631a2537323054f
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5503
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This change clarifies and simplifies the code when we support ANA
multipath because nvme_bdev and nvme_bdev_ns are not associate
directly and nvme_bdev_ns is got from nvme_bdev_subsystem instead.
As a result of this change, remove bdev_ocssd_get_ns_from_bdev()
because it is not used anymore.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I17a6eb4c63aa99e3537d7ad6ce134277c32e8d3e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5562
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add a small helper function bdev_ocssd_get_zone_size() to get zone_size
directly from ocssd_bdev. We do not need to cache nvme_bdev to get
zone_size by this helper function.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8a6fffac6efaff2cb4cc872c19d85e8e504c5622
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5561
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
I/O submit functions need only qpair, and so let's pass it directly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I11634f16ddec9371f3857587014e20312234fff8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5560
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Call bdev_ocssd_read() directly when buffer is already allocated
to improve performance and support retry in the bdev module as done
for the standard NVMe bdev.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Icf18148e09b61df7effc84535bea60f49d1c15b3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5559
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add nvme_bdev_ns pointer to struct bdev_ocssd_create_ctx and use it.
This will be helpful for the upcoming patches because nvme_bdev will
not hold nvme_bdev_ns directly and will have to be got via nvme_bdev_subsystem
instead.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8417ecb049fe7a3f50793db1d570733227f4f6b1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5556
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The next patch will add nvme_bdev_ns to struct bdev_ocssd_create_ctx.
This patch is a preparation for it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I37c35e0d89a088dbc5f0a9896c5fd03e22bfa6a5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5555
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We can pass nvme_bdev_ns directly to bdev_ocssd_verify_range() and
actually we don't need to check if bdevs are created on the same
namespace.
For the former, change parameters of bdev_ocssd_verify_range() from
nvme_bdev_ctrlr and nsid to nvme_bdev_ns. For the latter, remove the
check but add assert to nvme_bdev_attach_bdev_to_ns() instead.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I23c3a0ad02fa2b9f4c8149d9b02660140b2d3951
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5554
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
As same as the last patch, change bdev_ocssd_lba_in_range() to take
ocssd_ns as an additional parameter.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id8ceffa8ccaa279d6036408b8730e7b896b23b1a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5539
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
As same as the last patch, change bdev_ocssd_to_chunk_info_offset()
to take ocssd_ns as an additional parameter.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I05eae4206cad0511029b9b5c97b4e87facf109ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5538
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
As same as the last patch, change bdev_ocssd_from_disk_lba() to take
ocssd_ns as an additional parameter.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2612df739137f687cf9aa8699c54885836742b88
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5537
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
As same as the last patch, change bdev_ocssd_to_disk_lba() to take
ocssd_ns as an additional parameter.
In unit tests, get ocssd_ns from not ocssd_bdev but nvme_bdev_ctrlr
because direct association between nvme_bdev and nvme_bdev_ns will be
removed when supporting ANA multipath.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8e86b43bfe435fb2732e29e0fb6926d7572b29e2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5536
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When the NVMe bdev module supports ANA multipath, struct nvme_bdev
will not have nvme_bdev_ns pointer directly and will get via
nvme_bdev_subsystem.
The patch series starting from this patch will change helper functions
to get both ocssd_bdev and ocssd_ns as parameters to make the
upcoming changes easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iacec2eadc9e56ae7b84ee3c313c8986f55983a08
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5535
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
bdev_nvme_submit_request() calls bdev_nvme_get_buf_cb() directly
when the buffer is already allocated. This is for performance improvement
but will be helpful for the upcoming multipath feature to retry
read I/O submission because buffer should be allocated only once.
By reading the code a little more critically, bdev_nvme_submit_request()
can call bdev_nvme_readv() directly in this case, and do in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I005c70deabf7fbfe84b7029e9ef103ae122605e1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5558
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
nvme_bdev_ctrlr pointer is already cached to nvme_io_channel.
Hence let's remove it from the helper functions, bdev_nvme_create_qpair()
and bdev_nvme_destroy_qpair().
The following minor fixes are done together in this patch.
Fix the error paths of bdev_nvme_create_qpair() because
bdev_nvme_destroy_qpair() cannot be used as is in this case.
When calling bdev_ocssd_destroy_io_channel(), check if nvme_ch->ocssd_ch
is not NULL instead of spdk_nvme_ctrlr_is_ocssd_supported().
Cache nvme_bdev_ctrlr to nvme_io_channel just before calling
bdev_nvme_create_qpair() because the pointer is more associated
with qpair.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic96b7d0fa27dd1f32d573eecdc9d4eacc5593bde
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5511
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Factor out each RPC configuration from bdev_nvme_config_json() and
bdev_ocssd_namespace_config_json() into a helper function, respectively.
These changes will make us easier to introduce subsystem into the
NVMe bdev module.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I297f3fb47893d45463e742834c58d2b1213a4b01
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5468
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When a device is removed, we should use the remove_cb
that was specified when the device was originally probed
and attached, if one was set.
Also add a new spdk_nvme_ctrlr_set_remove_cb API. This
can be used for cases where a different remove_ctx is
desired than was specified for the probe call. This
also enables setting a remove_cb when using connect APIs
which do not have a way currently to provide a remove_cb.
This also requires fixing the bdev nvme module, which
was depending on the previously errant behavior.
Fixes issue #1715.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id848b39040099ff7a21fe57ea6b194a8c25ae015
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5510
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
I think that it was caused two different patches, so merging the two
nvmf change part into one for 20.01 release.
Change-Id: I906945b5ff059f9e01d0e5a33bc25744b79241e2
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5564
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Only need to add command about sudo -u "$USER" for
non root user.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I3b6dbea0175a60b19627cd64d21da3d59309f47f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5563
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
nvmf_subsystem_state_change() protects against going
starting the pause/change/resume chain again if we
haven't completed the previous chain. But add
some asserts to make sure the cb_fn and cb_args
never get set twice. This also requires setting
them back to NULL after they've been used.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I56c6c89bfb108223f731d5ac28100abbb746ab2f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5531
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Generating JSON-RPC config files by hand is very
tedious. Thankfully, SPDK has a number of ways
to simplify the process. Let's document them
in jsonrpc.md so that we have a single place to
point people who have questions.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7470cf07923f2ea25ab55bf40a422c31d17b31d0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5530
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We have an intermittent CI failure that hits this
assert. Adding some more detail to help analyze and
root cause.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2174dda58d0ae4d98359a914e5975f8be3e45a89
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5550
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
It is recommended to read CSTS when there is a timeout.
If CSTS.CFS (Controller Fatal Status) is set, we should
reset the controller.
But if an admin command on a fabrics controller times
out, reading CSTS submits another fabrics command that
could also timeout. Even worse, we are recursively
polling the admin queue for completions in this case.
Fixes issue #1716.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I23d31f6302375c52eba6f4370748d622fbd25ca7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5513
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This was missed when this option was added recently in
46a348597 (rpc: add keep alive parameter in bdev nvme).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I38fa2d4fc7c995bb0cea89b7b8cb51b2ce72aaa0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5512
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch is used to support ABI compatibility related with
spdk_nvmf_transport_opts structure. We add a field opts_size in
spdk_nvmf_transport_opts and change the related two functions.
Fixes issue: 1485
Change-Id: Ifed3dc482bbc8fb54eb7089f7a1931718682f214
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5293
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
iWARP doesn't support this ibv async event.
Probably some clean up of SRQ needs to be done, e.g.
post dummy drain WR to SRQ and wait for its completion
when qpair is being destroyed.
Change-Id: Ic1035dbd8192e665eedbaf89e5cf4e00cb0506c6
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5474
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is needed in case QAT devices and their VFs end up on different
node than node0.
Change-Id: I34386c71dff6232e191a8625a7f26c90ea2cad6d
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5464
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
--force will make sure that all pre-existing tags will be overwritten
with those from remote (this concerns mostly LTS tag which is meant
to be changed in the future to point at different releases). Cleanup
is also necessary as we can't build against repos with old contents.
Change-Id: I9f8c5521d828bed04ea1dc23fb8f3bf07aad1f23
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5493
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Since --tags also works with lightweight tags, it simply returns "LTS"
string when tree is switched directly to that particular tag. Make sure
only annotated tags are checked so the release version lookup can work
as expected.
Change-Id: Ica875bf406c8e23529ee2961645c5bf6b6bc00fa
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5492
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
It seems that some of the kernel patches from 5.x were backported
to centos8's 4.18 kernel. This requires 0001-pci_aer.patch to be
applied on the QAT source. To determine if it's needed, check list
of exported kernel symbols to see if said patch is needed since
relying on version check is not enough in this case.
Change-Id: I9fb24480058817ef9f4dd246eff234a95ce65137
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5484
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
