If the number of namespaces is very large, this can cause excessive
memory allocation. This is especially true because when the number of
namespaces is large, it is almost always very sparsely populated.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I27d94956c222ae3c49c6a7422164ae3a8ec8d963
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9302
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Do simple validity checks first, then check for duplicate controllers.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ic21d64574b37a3d9148e5cd6d5a7599449ea8fe1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9341
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
This is needed for reporting additional information in JSON RPCs
Change-Id: I45da2ea78cd5415f7536130b6793ca29e929b86e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9338
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When poll_group is used, several qpairs share the same CQ
and it is possible to receive a completion with error (e.g.
IBV_WC_WR_FLUSH_ERR) for already disconnected qpair
That happens due to qpair is destroyed while there are
submitted but not completed send/receive Work Requests
To avoid such situation, we should not detroy ibv
qpair until we reap completions for all submitted
send/receive work requests. That requires some
rework in rdma transport and will be implemented
later
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Idb6213d45c2a7954b9ab280f5eb5e021be00505f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9056
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Poll group holds lists of qpairs in different states and
when we got rdma completion with error, we iterate these
lists to find a qpair which qp_num matches. qp_num
is stored inside of ibv_qp which belongs to spdk_rdma_qp
structure. When nvme_rdma_qpair is disconnected, pointer
to spdk_rdma_qp is cleaned but qpair may still exist in
poll group list and when we start searhing for qpair by
qp_num we may dereference NULL pointer.
This patch adds a check that pointer to spdk_rdma_qp
is valid before dereferencing it. To minimize boilerplate code,
wrap all check in macro. Add unit test to verify this fix.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I1925f93efb633fd5c176323d3bbd3641a1a632a9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9050
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When a subsystem is being deleted, we disconnect all qpairs
and when the last qpair for some controller is disconnected,
we start controller desctruction process. This process requires
to send a message to subsystem's thread to remove the controller
from the list in the subsystem and after that send a message to
controller's thread to release resources.
The problem is that the subsystem also destroys all attached
controllers. This order is unpredictable and we may get
heap-use-after-free or double free.
To fix this problem we can rely on the fact that the subsystem
can only be destroyed in incative state, that means that all
qpairs linked to the subsystem are already disconnected and
all controllers are already destroyed or in the process of
destruction.
spdk_nvmf_subsystem_destroy API is now can be asyncrhonous,
it accepts a callback with cb argument.
Change-Id: Ic72d69200bc8302dae2f8cd8ca44bc640c6a8116
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6660
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
John Kariuki tested this patch on a system with
several Intel P5800X Optane SSDs, to determine the
performance impact of adding these two
spdk_trace_records() in the main NVMe I/O path.
The pathological case (512B random reads on a single
Xeon core) decreased from 13.10M to 12.88M, or 1.7%.
Normal workloads (4KB+) would incur a smaller penalty
since the I/O rate would be much lower - maybe even
unnoticeable..
This is a really valuable tracepoint to have enabled
by default, so I think this small amount of degradation
is acceptable.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie2543cadf3541eb74398d31ac0f495522ab49ec0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9303
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Currently THREADS tab displays records of objects that
have already been deleted inside SPDK target.
This patch adds redrawing of empty spaces to erase those
leftovers.
Deleted threads_info pointer array, since we can use
the global array directly.
Change-Id: Ia4ccb8f1b9a530cb86be50b9ed629f6b9b0543cb
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9199
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Chengqiang Meng <chengqiangx.meng@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
NVMe over Fabrics target page mentions nvmf traces, but nvmf traces
page does not link the nvmf target guide - the need to configure
target using our guide is obvious, if user follows the guide and
then enters the traces page. However, if user lands on traces page
first, the need to configure target first is not clearly communicated.
Change-Id: If4aef1a8d061acb436ca77c3308e8dda0ab340cf
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9345
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The issue is that:
We call cb_fn firstly, then add the related idxd_ops into the
chan->ops_list. Then if in user's callback, we call spdk_idxd_submit_*
function gain, then we will allocate new idxd_opts first. So if there is
recursive spdk_idxd_submit_* in the call back function, then
we will exhaust all the ops_pool resources. And the function will
report -EBUSY issue in _idxd_prep_command function.
And this patch fixes this issue by adding back idxd_ops before calling
user's call_cb function.
Change-Id: I32239fb29be875bc452803a48dc24ff5fa533016
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9401
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add more information to users which implementation cannot
be set for idxd.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ib26f117dc19fa1f28cc1d548549caba0b696a915
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9399
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Similar is already done for json-rpc bdev_get_bdevs, it might be
useful for the upper layer which has no interest in all but only
in one specified.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I25f7d20ff953e612d7982207d57607f1c3bbaa90
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9361
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
It is more flexible now as it is possible to get nvme ns handle to do
additional management or queries, however if nvme ctrlr handle is needed
there is already public nvme API for that with nvme ns as an input.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I5493168ad31cc95687962288d57fb5457f2d7dd6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9357
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When preparing for a reset, use this new call to tell
the driver to avoid sending DELETE_CQ/SQ commands to a
PCIe controller when they aren't needed.
Fixes issue #2073.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9ebb7d5c3f7cbb1c3192f162f32edbbea41acde1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9250
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Matt Dumm <matt.dumm@hpe.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
This new API signals that the ctrlr will soon be
reset. This allows the transport to skip unnecessary
steps in following calls to the driver prior to the
reset - for example, skipping PCIe DELETE_SQ/CQ
commands when freeing an IO qpair.
Note that if we are deleting a qpair after
prepare_for_reset was called, and the qpair is
still waiting for a CREATE_IO_CQ or CREATE_IO_SQ,
we cannot poll for those commands to complete,
but we also cannot free the qpair immediately.
So set a flag for this case to defer the
destruction until the outstanding CREATE_IO_CQ or
CREATE_IO_SQ callback is invoked (typically as an
aborted command when the reset happens).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I34c6276ae71e7d61ad4a3720f1a985b1ee96bd8b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9249
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Rename endpoint->fd to ->devmem_fd to better reflect its purpose.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ic73cb6684228d4ecb3d58c1865c80a3d7d07c223
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9402
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Added writing out JSON configuration for the scheduler
subsystem.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I51b1f94b3f56d0bfb8a87127163c8e248d6846b6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7119
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch moves schedueler and governor related API from
the internal event.h to public scheduler.h.
With this it is possible to create subsystem responsible
for handling the schedulers.
Three schedulers and a governor were moved to scheduler modules
from event framework.
This will allow next patch to add JSON RPC configuration
to the whole subsystem.
Along with easier addition of other schedulers.
Removed debug logs from gscheduler, as they serve little purpose.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I98ca1ea4fb281beb71941656444267842a8875b7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6995
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Make sure to cancel the scheduling during:
1) gather_metrics error (already present)
2) setting the scheduler to NULL (new)
3) shutdown of the application (new)
In all of the above scheduler cannot proceed to
the balance() function.
Prior to this patch lack of setting
g_scheduling_in_progress to false would block
_start_subsystem_fini() from proceeding.
Resuling in application never shutting down.
thread_infos are allocated during gather_metrics,
and freed on threads_reschedule.
The added cleanup is used during 1) and 2).
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5ab77c85aaa9f94bd4e1a1660b55ab2f2c47bbdc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9326
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When we rotate the socket in the list, we did not check whether the uc pointer
is NULL, then we cause the coredump when using uc pointer.
When we add a new socket (with pollin event) into the pending_recv list,
we add it into the end of the pending_recv list, then it delays the execution
of the newly socket, and it can cause the timeout especially when a socket
is in a connection phase.
So the purpose of this patch is:
1 Revise the rotation logic to handle the two cases, i.e., (1)sock is in the
beginning of the list; (2)sock is in the end of list. The purpose is
to avoid NULL pointer access, and efficently handle the exceptional case.
2 When there is new pollin event of the socket, we should add socket in the beginning
of the list. And this can avoid the new socket handling starvation.
Since max poll event num is 32 from upper layer and if we always put the new socket
in the end of the list, then starvation will occur if there are many socket connection events.
Because if we add the new socket into the end of the pending list, we will always handle the
existing socks first, then the later coming socket(with relatively pollin event) will always be
handled late. Then in the sock connection initialization phase, it will consume a relatively
long time, then the upper layer connection based on this socket will cause timeout,.e.g.,
ctrlr.c: 185:nvmf_ctrlr_keep_alive_poll: *NOTICE*: Disconnecting host nqn.2014-08.org.nvmexpress:
uuid:af56cce7-2008-408c-a8a0-9c710857febf from subsystem nqn.2019-02.io.spdk:cnode0 due to
keep alive timeout.
[2021-08-25 20:13:42.201139] ctrlr.c: 579:_nvmf_ctrlr_add_io_qpair:
*ERROR*: Unknown controller ID 0x1
Fixes#2097
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I171b83ffd800539e86660c7607538e120fbe1a91
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9223
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Do not print ETA output. This pollutes logs when long
benchmark tests are run.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I0dfe30fdd727decb4d81be6b530e675bc1f4518c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9379
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
As per os-release(5), if $ID is not recognised, $ID_LIKE can be used
to identify similar systems in preference order. Modify the script to try both
variables.
Also do the same for the RPM build scripts.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I4ed924df01ec678aab232e114d8c9980463c38e0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9260
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
The threads pop-up has additional whitespace printed after the last
poller record. Since this empty space is not used anywhere in
in spdk_top, it can be removed.
Fixes#2137
Change-Id: I2e8fee79eea8ffd2a98e803cf41baa2fc4f95d24
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9360
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We report other errors in spdk_interrupt_register(), so add one if there is an
issue with adding the given efd to the fd group.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Idcd810d2b3f644bab1514063b399b9767797130f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9388
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
transport specific options are already introduced however dump was missed
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I2fe533898d82534cc6cb8a3e5de4e2b2c72ae00a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9355
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Expose the already existing nvme_ctrlr_get_cc as
spdk_nvme_ctrlr_get_regs_cc, similar to spdk_nvme_ctrlr_get_regs_csts and
spdk_nvme_strlr_get_regs_cap etc.
Signed-off-by: Tomasz Bielecki <tomasz.bielecki@wdc.com>
Change-Id: Ibfcf6fbe64dee3719f381184fb728ab6e4d52526
Signed-off-by: Tomasz Bielecki <tomasz.bielecki@wdc.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9220
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krishna Kanth Reddy <krish.reddy@samsung.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Refine ANA state from per subsystem listener to per subsystem listener
per ANA group.
Add an array of ANA state per ANA group to subsystem listener. The array is
indexed by ANA group ID - 1.
Then in I/O paths, we get ANA state by
ctrlr->listener->ana_state[ns->anagrpid - 1].
The NVMe specification indicates the existence of NVM subsystem specific
ANA state when FFFFFFFFh is specified as NSID for the Get Features
and the Set Features commands. For these, we return the optimized state.
Update the nvmf_subsystem_get_listeners RPC to return all ANA states
of the underlying ANA groups. The nvmf_subsystem_get_listeners RPC is
not matured and not used in the test code yet. Hence compatibility is
not high priority.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia2d4d5361ac01236f595c22765fd35e4c5fdee0e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9064
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is the first patch in the patch series to control ANA states not only
as a unit of subsystem listener but also as a unit of ANA group and create
user preferred mapping between namespaces and ANA groups within a single
subsystem.
This patch adds anagrpid to both spdk_nvmf_ns and spdk_nvmf_ns_opts, and adds
ana_group array to spdk_nvmf_subsystem to count number of namespaces per ANA
group within a single subsystem. The size of the ana_group array is equal
with the size of the namespaces.
For each subsystem, allocate ana_group array regardless of the value of
ana_reporting of the subsystem.
For each namespace, at its creation, initialize anagrpid explicitly to be equal
with nsid by default and increments the corresponding entry of the ana_group
array of the subsystem regardless of teh value of the ana_reporting of thee
subsystem.
Hence the contents of the created ANA log page is not changed even if the
algorithm to crete ANA log page is changed.
Additionally this patch adds a unit test case that one ANA group
has multiple namespaces.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I78539db4e7248c2953c6927ff8128cb5a7e34b96
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9102
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The next patch will add anagrpid to spdk_nvmf_ns_opts. This patch
is for the upcoming change and futhre potential changesto ensure the
ABI compatibility.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibe1024a27ea4ab823d40d775470cde78b9eb8d2c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9112
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is done to get rid of this:
autotest_common.sh: line 384: [: -ge: unary operator expected
This happens for older libiscsi which doesn't define
LIBISCSI_API_VERSION in the iscsi.h.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I658ab2936e161d648fc301fadcc510b84a61d916
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8710
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Previous expansion was assuming there's only one instance of "test/"
string in source's path but this is not really the case on phy
systems running in the CI. Instead of relaying on the string pattern
of the path, simply disect it into basename_dir/source. So e.g.:
/home/vagrant/spdk_repo/spdk/autobuild.sh -> spdk/autobuild.sh
/home/vagrant/spdk_repo/spdk/test/nvmf/common.sh -> nvmf/common.sh
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I6f458566547dcaf5508263b2b19f4e1bc0de4f32
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8836
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
In case SPDK app crashed the leftover sock file would force completion
to use rpc_get_methods() instead of the -h output to get the list of
rpc functions. The end result would look something like:
$ rpc.py <TAB> IsSPDKapplicationrunning?
By the very accident this is quite informative about the state of the
app but from bash-completion standpoint not very useful. Instead,
if rpc_get_methods() fail fallback to -h output.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I9ca0b919445e5a08c49ab8fa5d0a3acc2e5c4e4e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8448
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
This helps in completing, for instance, file paths as arguments to
some of the rpc functions (like bdev_aio_create, etc.).
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Id0880773fade3fc6128ac9de6abfe19f6b40077f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8447
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Symlink requires repo to be around, having a hard copy allows it to
be used standalone.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: If5aa354b10762805394418e9c9c0d171623ba093
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8446
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Previously we used assert for this check.
Fix#2141.
Change-Id: Ieaf8e34721a5b65e6d7790d56587239e2e6d75f4
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9383
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If a response is returned prior to _nvmf_request_complete being called then the cid in the response is
not set correctly and the PDU state is not reset which causes a hang and the PDU state machine is
expecting more data but none will be sent. There are two cases where this can occur:
1) If the request is bi-directional
2) If nvmf_tcp_req_parse_sgl returns an error (e.g max_io_size exceeded)
Signed-off-by: matthewb <matthew.burbridge@hpe.com>
Change-Id: Icc3ed02a4499a12d8920e6433a746b72022a72fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9327
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If NN is very, very large, this allocates too much memory. For now, just
use a list.
Change-Id: I904977673d8fb6c86f03c94ba798c6cc07f4a4d8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9301
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
