USE_DEFAULT_DIRS can be used together with GEN_SPEC to not hardcode
our custom paths into the .spec and instead use default set of dirs -
this should allow users to not define custom dir macros for their
own rpmbuild instances and simply run the build against the .spec:
$ GEN_SPEC=yes USE_DEFAULT_DIRS=yes ./rpmbuild/rpm.sh > foo.spec
# .. prepare source ...
$ rpmbuild -ba foo.spec
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ia50ac303dfe9090fbd424e63e9eee7d939415ac2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8390
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: If7c2d2b4b09bb05ee42f78e01ef4c68a0810d2cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8388
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <tomasz.rochumski@intel.com>
Otherwise, the test using this application will succeed, even if no test
is actually executed.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib2235795ea51985d418c2be6904a68db15aa593a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10772
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Set the maximum admin queue size to 256 to make sure it can hold the
number of admin requests required by the abort application.
This patch fixes the following error and actually allows the test to
start:
ctrlr.c: 720:_nvmf_ctrlr_connect: *ERROR*: Invalid SQSIZE for admin queue 135 (min 1, max 127)
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I4042481ffb2792381ef2e4ad295be067a610bd7e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10771
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Otherwise, this field is left unassigned and the host receives some
garbage cid.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: If1e1fe8c7543bcedfbb897200696e05b71c57e0c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10770
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When aborting a request in a NEED_BUFFER state, we set it's completion
status and remove it from the pending_buf_queue. Since it's no longer
on that queue and there's no completion it's waiting for, we need to
manually kick.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I1272d441aec3b3090cd8c143a2112a8a6866fcf0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10769
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I126039482b5c9e3caba6565b067c747203dea476
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10822
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Also name the fuzzer test case with `fuzz_admin` prefix
for ADMIN commands.
Change-Id: I6e5eeb71a5f795fee8afba034f3ad436220e3c20
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10815
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We already uses vfio-user instead.
Change-Id: Ic565554cc124fe34304c3f9dbadbf01723ddf900
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10634
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Two cgroups are created prior running the scheduler tests:
- /cpuset/spdk
- /cpuset/all
/cpuset/spdk is the cgroup dedicated for the tests, i.e., the SPDK
processes executed along the way. The resources consist of the cpus
that are initially picked up by isolate_cores.sh.
/cpuset/all is the "dummy" cgroup that holds most of the remaining
processes that run on the target system - "most" since not every
process (especially kernel threads) can be migrated between cgroups.
This cgroup's resources include all the online cpus except those
selected for the /cpuset/spdk.
This should allow for lowering the noise on the target SPDK's cpus
and make sure that load on each cpu is generated exclusively by the
SPDK.
Fixes issue #1950
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ic45149f55052ff03bead0b9bea086f95c87ea75d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10584
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
These functions are meant to help in isolating processes to make sure
SPDK is exclusively run on the dedicated cpus.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ie7575ce4ef68c48f6f63dbedace34f23fdb8441c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10583
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The tracepoint passes qpair pointer as an argument, while not specifying
it in its definitions, which makes the following assertion to fail:
trace.c:83: _spdk_trace_record: Assertion `0 && "Unexpected number of tracepoint arguments"' failed.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I315e9bf0465db7033ac0f1169536c459ac4e9250
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10761
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Move drawing contents of thread pop-up to a separate function.
This will be used in the next patch, where drawing will be moved
inside a while loop to refresh changing values.
Change-Id: I1c18dbe09d828da60357d9ce195226bc09033597
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10760
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Changes CLOCK_REALTIME to CLOCK_MONOTONIC in show_stats()
to avoid getting time_diff values below 0.
Time counters in future patches will be using
CLOCK_MONOTONIC as well.
Change-Id: I4de834e0ad3266986ae11be95859a7bc64e5fc70
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8930
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Changes thread data passed to display_thread() function and where
thread data is being allocated. This will be used in dynamic thread
pop-up refreshing in the next patch. Without this change refreshing
threads pop-up would result in accessing data after it has been freed.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I1e726dfab5e16c5e8d198c62bde123a7fc8d53a8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8000
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Currently if we remove a listener from a subsystem, we
disconnect *all* qpairs that have the same transport ID
as the listener being removed.
Fix that, since we should only disconnect qpairs from
controllers associated with the subsystem that had the
listener removed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6cf7422d14f23bf02ba6c4b034b172870694b3e6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10690
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We will want to use bdev_nvme_create() to attach to
controllers identified through discovery. In this case,
we won't be reporting bdev names back to an RPC caller,
so there's no need to allocate an array of names to be
filled out since they won't be used.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia386d034df2c2d5a60f9aa18338ba415ec03d763
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10689
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We will need to add another step in the fini path for
stopping discovery pollers, so this patch prepares for
that.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifecbbac60262f3aae7f7a7ced09b7a600df7c2e8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10590
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
One of the objects wasn't enclosed with spdk_json_write_object_end(),
causing the resulting configuration to be broken.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib0311e002e43d4ad01c61feb6af54cb4212b477b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10755
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There is situation that num_extent_pages is zero and original pointer is
also NULL, the realloc() could return a Not NULL pointer.
Related UT has been added and updated.
1) In the default allocation (num_clusters == 0), the extent_pages is not allocated as expected.
2) In the thin provisioning allocation (num_clusters != 0), the extent_pages will be allocated if extent_table is used.
More related information as below:
The crux of the problem is that according to POSIX:
realloc: "If ptr is NULL, then the call is equivalent to malloc(size)"
malloc: "If size is 0, then malloc returns either NULL or a unique pointer value that can later be successfully passed to free"
blobstore was relying on realloc(NULL, 0) always return a unique pointer value, and not NULL. This is not portable behavior.
Change-Id: Ibc28d9696f15a3c0e2aa6bb2371dc23576c28954
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10470
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This id can be used as the 'portid' for discovery
log entries. Previously we were putting the entry
index in the portid field which was incorrect.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9f373585fe671ba7e69eb8e07f603f8e8ac1e270
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10589
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This can be used to connect to a discovery controller
to get and print discovery logs whenever a discovery
AER completion is received.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ieeb8630633e1be3031074caff6196d4124c5fcee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10548
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This API is a helper for getting the full discovery
log page from a discovery controller. It will read the
log page header to get the total number of entries,
allocate a buffer for all of the entries, and then
issue a series of get_log_page commands to read each
4KiB worth of entries.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I02666ef5adcb9fc8825a221655811ace708f97b8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10564
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
nvme_ctrlr_construct_namespaces
We can just reallocate here to be more efficient.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I8cfc87da23aee6c05ff83aea2165683dddba1dbd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10688
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In the one place this was called, we can call nvme_ns_construct
instead. There's no harm in re-fetching the identify pages.
Change-Id: I91292ff9650bdc7edd5588a05837b671dcac1922
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10102
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I3ba8bfc650103ed19090d6be969d38ed01ef2e9d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10175
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: If9c5d0071d30b3a5ac40ea5085dbf564b98cb667
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9947
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I780568b9c95a47038278c3ed19fb08228a48fb9c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10740
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
so the functions declared in this header file are not mangled by
the C++ compiler when building, for instance, a bdev driver, implemented
in C++.
Signed-off-by: Kefu Chai <tchaikov@gmail.com>
Change-Id: I5a5d1abb06d0d3cd5f5d9245bb7c080f3874e83b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10745
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
These changes are needed for the 5.15.x kernel that's currently being
shipped with fedora35.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I7e79bff77a93f81bd93376b84f4ef7f7230cc322
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10610
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch will fix the following c++ warning, if
SPDK_LOG_REGISTER_COMPONENT is used in c++ projects.
designator order for field ‘spdk_log_flag::name’ does not match declaration order in ‘spdk_log_flag’
Signed-off-by: Liu Qing <winglq@gmail.com>
Change-Id: I2a709bc78d8e4329055c2cd83cddddae01fb0fa1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10697
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Bump up the version of nvme-cli to 1.15.
Change-Id: I1ed024bfd70027f947962ec76dfaf94c1660957f
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9912
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
No code changes. Move these up so they can be used by some of the
regular command submit paths in future patches.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ib8e54d47f7df35771b6c89d7c49d5182cae79e47
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10285
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_ioviter_next will walk through two iovecs and yield pointers
to common length segments. For example, given a source iovec (siov) with
4 1KiB elements and a destination iovec (diov) with 1 4KiB element, the
following will happen:
first spdk_ioviter_next:
src = siov[0].iov_base
dst = diov[0].iov_base
len = 1KiB
second spdk_ioviter_next:
src = siov[1].iov_base
dst = diov[0].iov_base + 1KiB
len = 1KiB
third spdk_ioviter_next:
src = siov[2].iov_base
dst = diov[0].iov_base + 2KiB
len = 1KiB
fourth spdk_ioviter_next:
src = siov[3].iov_base
dst = diov[0].iov_base + 3KiB
len = 1KiB
fifth spdk_ioviter_next:
len = 0
This is a useful utility for performing operations where both the source
and destination are scattered memory. As an example and a test vehicle,
spdk_iovcpy has been updated to use this internally.
Change-Id: I7e35e76d38e78d07ea1caf6282d0dfc02182aa83
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10284
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The host may have specified a hostnqn to use to connect to
a discovery ctrlr, so we can't just use the default ctrlr
opts to connect - we need to call the probe_cb (if there is
one) to get any options that the host may have specified.
Tested by using discovery_aer tool, creating a subsystem and
listener, and then adding a host on the target side that matches
the hostnqn specified to the discovery_aer tool.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I07266e984e0094d3a768e6a0d5ea3a3bd71e32ba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10547
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In NVMF Revision spec 1.1a, discovery log should be updated
when removing hostnqn of subsystem.
Update unit test to check the discovery log when removing
hostnqn and destroying subsystem.
Signed-off-by: Peng Lian <peng.lian@smartx.com>
Change-Id: I51c597a2493295a677a7aa68e4f13a887f7e1140
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10668
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I6794886832ec641ec18b72621f21264970d805d5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7118
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Macro PCI_CFG_SPACE_EXP_SIZE isn't defined in kernel 4.9.x, so
we use a fixed value here instead.
Fix issue #2282.
Change-Id: Ife1444e919e4c1dc9328437002c15befe2f393e7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10691
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If user uses the 'loops' parameter, then it will
call the open+close callbacks for each loop, but only
cleanup at the end of the entire run. Since we alloc
the io_qpair in open, but don't free them until
cleanup, we end up running out of io qpairs at some
point if we run too many loops.
So solution is to free the io qpairs in the close
callback.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibac864836f94994cdd24a7886894778268b14f73
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10674
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
LLVM provides libFuzzer which does coverage-guided
fuzzing of a library or application under test. For
SPDK, we can use this as a new and better way to
generate random commands to the SPDK nvmf target.
By default, libFuzzer provides the main() and your
source file just provides the function called by
LLVM for each iteration of random data. But this
doesn't really work for SPDK since we need to start
the app framework and the nvmf target. So we
specify -fsanitizer=fuzzer-no-link, explicitly
specify the location of the fuzzer_no_main library
and then call LLVMFuzzerRunDriver to start the
fuzzing process once we are ready.
Since this is all coverage-guided, we invoke the
fuzzer inside the nvmf target application. So this
patch creates a new target application called
'llvm_nvme_fuzz'. One core is needed to run the
nvmf target, then we spawn a pthread to run the
fuzzer against it.
Currently there are two fuzzers defined. Fuzzer 0
does random testing of admin commands. Fuzzer 1
is focused solely on GET_LOG_PAGE and fuzzes a
smaller subset of the bytes in the spdk_nvme_cmd.
Additional fuzzers can be added in the future for
other commands, testing I/O queues, data payloads,
etc.
You do need to specify CC and CXX when running
configure, as well as specify the location of the
special clang_rt.fuzz_no_main library. The path of
that library is dependent on your clang version and
architecture. If using clang-12 on x86_64 platform,
it will look like:
CC=clang-12 CXX=clang++-12 ./configure --with-fuzzer= \
/usr/lib/llvm-12/lib/clang/12.0.0/lib/linux/libclang_rt.fuzzer_no_main-x86_64.a
Then just do the following to demonstrate the fuzzer
tool.
make
test/nvmf/target/llvm_nvme_fuzz.sh --time=60 --fuzzer=0
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iee0997501893ac284a3947a1db7a155c5ceb7849
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10038
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use one of the recent branches for rocksdb. This allows
to build with less -Wno-error options. Adjust C flags
for more recent GCC versions.
Change-Id: Icf176d909a92195da2ae744a53e0cb53530b4573
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10628
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This change implements mechanism to allow user to
define multiple tpoint masks separeted with a comma
(e.g. 0x400, 0x8).
This is going to be used in the next patch to implement
enabling of individual tracepoints inside a tracepoint group.
Change-Id: I963f89684aa62b6e1dde57e22ddf835aa2c89f05
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10536
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
it is possible that some specific transport doesn't support
NVMF_MAX_ASYNC_EVENTS (although it is a recommended value by spec)
with that change it is possible to reduce aerl on transport specific
layer so it can be advertised correctly during identify controller
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ife6465b5324fb39f9b343c6f42b860e9dd1164b2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10422
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
