On host side the connections are created and then added to thread's
poll group. Those connections could use different NIC queues underneath.
To route all connections of poll group through single queue a unique
placement id is chosen as group_placement_id and each socket of poll
group is marked with group_placment_id using getsockopt(SO_MARK) option.
The driver could use so_mark value of skb to determine the queue to use.
Change-Id: I06bda777fe07a62133b80b2491fa7772150b3b5d
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6160
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Commit e9ebbdaefc updated
custom patches for mainline DPDK, but did not keep their
previous versions. We still need the old patches to build
with older DPDK versions.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ibe222a444bed2fdee63c8dcfcebc8402bb991fbe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7610
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
tcp transport doesn't send a response capsule when
c2h_success is set even if cdw0 or cdw1 are non-0.
Signed-off-by: Ed rodriguez <edwinr@netapp.com>
Signed-off-by: John Meneghini johnm@netapp.com
Change-Id: Ieba81fcc50342a2009f7931526e6f8392e26b6a5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6808
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The RPC is for testing purposes, as such does not need to provide
documentation in SPDK proper.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia153ad326e4c2ac43b511f9c2fba4aa95f1e3295
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7607
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Plugin RPC method 'reactor_set_interrupt_mode' is added
to set specific reactor run in interrupt mode or back
to poll mode.
Based on this RPC, scenarios later can be implemented
to verify interrupt mode functionality.
Change-Id: I9785e6942299bab7c949780faf18216e293f0b1d
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7347
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When do spdk_reactor_set_interrupt_mode, if reactor
already runs in the specific mode, directly call
callback function before return 0;
Change-Id: I1fd8b753e9881755aa128aabe6d1e2749e58b39b
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7549
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We do not want to do any further work on adding
the sock to the group if the epoll_ctl (or kevent)
fails.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I44b6dc86ce5676aa1b8d6c50b86f22758e4e37fa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7594
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
All JSON-RPCs must be documented in jsonrpc.md
Change-Id: Iec9119a01433fd0cbe4df4477ce94cc2feeb0d54
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4074
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Community-CI: Mellanox Build Bot
The net library isn't needed - everything these RPCs
do can be done externally to the SPDK application.
This library will be removed in the 21.07 release.
As part of the deprecation, mark the net RPCs as
private. This will prevent an upcoming patch from
complaining that these RPCs are not documented.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I61118820fd29e410dca763595c3d9fd01a57373d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7592
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
suppression
When all of the following conditions are met:
- non-blocking socket
- zero copy is enabled
- interrupts are suppressed (i.e. busy polling)
- NIC tx queue is full at the time sendmsg() is called
- epoll_wait sees there is already an EPOLLIN event
then we can get into a situation where data we've sent is queued
up in the kernel network stack, but interrupts have been suppressed
because other traffic is flowing. This makes the kernel miss the
signal to flush the software tx queue. If there wasn't also already
a pending EPOLLIN event, then epoll_wait would have been sufficient
to kick the system out of this state. But when all of this aligns,
it hangs.
We deal with this by detecting the scenario and calling poll(), which
will force the kernel to issue the pending transmits.
Change-Id: Ifb247159b7de16c8fc72a90f0333f5b421c8bd07
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6750
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Added note to the nvmf documentation about an issue [1] with destroying
qpairs on E810 cards in RoCE mode. The note needs to be removed once
the issue is resolved.
[1] https://github.com/spdk/spdk/issues/1840
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ie03a7a662391bd738848f71e582748a334a6ffd5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7577
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For pollers that don't natively support interrupts, using
a busy wait mechanism temporarily.
An interrupt falicity for busy wait will
be registered for non-periodic poller.
Internally, an eventfd is created to each busy wait
poller. Write the eventfd when set interrupt mode,
and only read the eventfd when set back to poll mode,
then the busy wait poller will be called repeatly
in interrupt mode.
Change-Id: Iaeae14d1ff69fd9ef7d606a0b0a70193764513e9
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6711
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
In next patch, if poller doesn't have a period, eventfd
will be created which's always busy automatically.
This eventfd can be combined with timerfd. So rename
timerfd to interruptfd.
Change-Id: Ibffa30ecfcaa73e55f47e97fac854641b74f2dfb
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7546
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Defined callback for spdk_poller to adapt itself to
set interrupt or poll mode. The callback can
be registered to spdk_poller by new function
`spdk_poller_register_interrupt`
Interrupt callback operations for period poller are implemented,
so period pollers now are interruptable.
Change-Id: I2aa6ebfdd75f76b85a70af7e42530be4131ddc8a
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5752
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
These refined functions are prepared to adapt period
poller to following poller switchable API.
Change-Id: I34d2a785fa0e757b97b0dac5ccf24819d75e0184
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7156
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
The interrupt mode of spdk_thread can be operated
by reactor based on reactor's interrupt mode when
the spdk_thread is scheduled or the reactor is set
into interrupt mode.
Change-Id: Ibeef7ffb759589a7b372bd78e59e3410be061383
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6709
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_thread_set_interrupt_mode can get spdk_thread run
between intr and poll mode. It is only valid when thread
interrupt facility is enabled by
spdk_interrupt_mode_enable(). Currently, this function
is limited that no poller is registered to the spdk_thread.
Change-Id: Iba54accd5976beb6f6e155014903928ce2858e36
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6708
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
All the other RPCs use underscores in the names of their fields, so
`framework_get_scheduler` should also use them instead of the spaces.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I0e9edd7c59a4ab61643a7b558a2359e1805ed0b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7557
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
DPDK recently clarified some semantics on the rte_devargs 'data'
and 'args' fields. This actually breaks our use of the 'data'
field to store the 2 second timeout timestamp for delaying
attach to newly inserted devices. Investigating this further,
it does not seem our use of the 'data' field was valid - it just
happened to work until now.
We could use the 'args' field now. But knowing whether to use
'args' or 'data' would then be dependent on the DPDK version.
We cannot use RTE_VERSION_NUM to decide, because this is a
compile time decision, and it is possible in shared library
use cases that we could actually link and execute against a
different version of DPDK than we built against.
So instead we will create our own env_devargs structure that
will store these allowed_at timestamps. Currently it's just
a linked list (which is exactly how DPDK does it) - we could
make it more optimal with a hash table down the road, but this
code only executes when we are doing PCI enumeration so it is
not performance critical.
Fixes#1904.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3ee5d65ba90635b5a96b97dd0f4ab72a093fe8f7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7506
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
status code and type is inspected and reported
Fix issue #1893
Signed-off-by: Monica Kenguva <monica.kenguva@intel.com>
Change-Id: I6f181d8c9464182b23c658f4c268b900398fd751
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7567
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
New UT verifies number of extent page writes for
thin provisioned blobs.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6b52195d26c3c1414ca862b03e8a3043bbe29b42
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7017
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Before this patch blob persist wrote out all allocated extent pages.
Intended design was to write out extent pages in two cases:
1) Thin provisioned blobs to write out extent pages when necessary
during cluster allocation.
2) Thick provisioned blobs to write extent pages during blob persist
when the blob was resized
This patch implements 1) by inserting extent before issuing blob persist
in cluster allocation path.
See blob_persist_extent_page_cpl() and blob_insert_new_ep_cb().
Blob persist might have to rewrite the last extent page after blob resize.
See blob_persist_start().
Meanwhile 2) was incorrecly implemented since it always re-wrote all
extent pages starting from 0. This was addressed by limiting number
of extent pages written, only to ones that were resized.
Some considerations were needed:
a) blob resize happen on cluster granularity, it might be needed to re-write
last extent page if resize was not large enough to change number of extent pages
b) first extent page to write should be based on the num_extent_pages from
active or clean, depending on resize direction
See blob_persist_start().
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ibba9e3de3aadb64c1844a462eb0246e4ef65d37f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7202
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
When both clone and snapshot had already extent pages
corresponding to the same region in cluster map,
the clone extent page was replaced with one from snapshot.
This was incorrect and would result in loss of clusters
from clones extent page. It did not occur in practice
because all extent pages were rewritten anyway during
md sync. Cluster map was correct so updated extent pages
were too.
Cluster map correctness is verified in UT _blob_inflate_rw(true),
at the very end when checking data consistency of inflated blob.
This patch writes out the updated extent page explicitly.
So it would be possible to skip wirting out extent pages
during md sync later in the series.
Note 1)
At this point in series the extent page is written here,
and in blob persists. The later will be removed later in
series.
Note 2)
Errors during updating extent pages are not accounted for,
but neither does syncing them in blob persist.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I7deac3c64299f33f8df49e860af1a16295c074e6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7438
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
The blob_insert_extent() name was confusing, since the function
was actually responsible for writting out the extent page to disk.
Changed to a more fitting name.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia312b0ef152100f30d5a1bfe123e55135c8afa6e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7561
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
This patch does not change functionality. It separates
three stages of updating clone during snapshot deletion:
- updating cluster map
- updating extent pages
- removing backing device from clone
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I44869f3be596d9d0f06db4acedfdd7e1500516ff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7437
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch addresses couple issues:
1) Before issuing the md syncs the previous steps in test left
blob state in dirty state already. The resize never had a chance
to apply. This patch adds a proper md sync and polls for completion.
2) Changing blob state is something that should be done via API.
In order for dirty state to apply immidietly set_xattr is now used instead.
3) Verify test state in callbacks to make sure not only the number of
completions is correct, but their order.
This patch is introduced because of the test originally worked
only because of the extent pages always writing out its pages.
The second sync always was delayed because of this.
Meanwhile that should not be the case, since no MD or EP modification
was done.
Later in the series Extent Pages are fixed, but this test remained incorrect.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iac17c27f6ff83f2b79835aa6e48472d5293c44d0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7233
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
When user specifies --with-uring without a directory,
check that liburing is actually installed on the system.
If it isn't, instruct user to build and install liburing
and exit with error.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iead4f30bdc3905c3b3462a32fd676a39fbd0d7d2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7542
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Configuring ISA-L takes a bit of time, so it is better
to check dependencies early and bail, rather than
waiting 10-15 seconds to configure ISA-L, only to then
fail because some dependency isn't found.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I864a941df6517381761c9d4db58e2364c1776e4d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7541
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
"make clean" after finishing rpmbuild. Otherwise leftover
"./configure" options and libraries tend to fail the
next in line "--enable-lto" build.
Fixes#1905
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I6a04028bfdfeb03b089c86afe7f81489fd6976f2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7562
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I9b9f8c9e407425fdab1e84050354481ad76c19c2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6655
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Only passing rbd pointer is enough.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I652581879c9ba228f9af0aa3f5353915a286c6c8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7548
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Resizes cores pop-up to fit new field - core frequency.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I571ed92ea68a6c42f214caa80bbfab2b2fb3b03a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6766
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Modifies functions and data structures to allow for
core frequency display in CORES tab.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: Ie3c6eadb090b8e0a6e57968b79d4852f1957b0fc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6583
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Modifies RPC "framework_get_reactors" to get core frequency for current
core and insert it into JSON response.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: Ibb9c25e6e1d28ddb4cde42baa20a7e9808652ae8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6582
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Currently _get_core_curr_freqs returns an index from the array
of available frequencies for given core. This change aims to
make this function execute what its name suggests.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I1143f692e7bbbf2f8f9e1cd4943f8e3ecd70ddea
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7452
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The index of g_thread_info is equals to the thread ID.
When the thread ID is not continuous, but index of ABC is continuous,
so some elements of g_thread_info array will be empty.
fixes#1899
Signed-off-by: ChengqiangMeng <chengqiangx.meng@intel.com>
Change-Id: Ib90a26dcc2d47792a098b163746906f34043453a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7493
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I197e03fdd11a7b2beda8ca301857debfb56a8f18
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7555
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
