This patch verifies that functionality of only releasing cluster
that was originaly claimed in race thread condition.
Change-Id: I4d60ffdb4fd6612d61a761835aae2fd1bf81b7fd
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452626
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When new writes come from different threads, cluster allocations can
happen many times at once. The corresponding cluster number for the map
is determined via _spdk_bs_allocate_cluster() and kept in ctx->new_cluster.
The cluster itself is inserted into the map only on md_thread.
When there is conflict of two threads allocating same cluster,
message is returned to the losting thread to release the cluster.
Before this patch, on such failure the cluster to release
was calcualted from the page. This resulted in releasing the
cluster claim for thread that actually won it.
This patch makes it so that cluster allocated and save in ctx
is used instead.
Change-Id: Id10811b887f673f9b89e41e0637d4422f1d7270d
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452625
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
They have a lot of intermittent failures caused by the
test itself, not SPDK QoS. The actual bdev throughput
on our CI is roughly the same as the QoS limit in that
test, so the bdev can often fail the case where it's
expected to achieve more than the original QoS limit
after the limit is disabled.
Eventually this test will be replaced by a different
one, without any iscsi involved.
Change-Id: Ic71537b1c33376dda132e07210a34cae9bd073cc
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452424
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Simplify the test to only run on the RAID volume, but then
also perform several operations on the logical volume while
I/O is occurring in the background. This would have caught
several recently filed bugs.
Change-Id: If937a118ea034ce08d95b70fe74dc5f445cb1008
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452150
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3858c637d421b58e74fa5573d257e59fed92824a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452268
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
ipsec-intel-mb bumped the requirement in its v0.52.
Change-Id: I41d40e03720dca6146035bf261a4bc684a1bb52f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452045
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch add new _spdk_bs_delete_blob_finish function
which will be helpful in future changes.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I2d492b6102f33ad35b7b6fe408f709f54b7b2341
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452251
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds new function which is used to check
if blob can be removed when requested.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Iafa82fba9bf67ffd15cf639f4665087f054b6b7d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452242
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch creates new function that will be helpful
with further implementation of 'delete snapshot'
feature.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I66f138ba217fb4a4186f2703900a2952cdb8e438
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452240
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was still pointing at the wrong place.
Change-Id: I793030432e9b4e7a4c284aa6c47273e9434cd4dc
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452245
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We decided to name compress bdevs with COMP_ and then the name of
the underlying bdev so the RPC parm name was stale. Previously
hardcoded the path to PM for early dev so replaced name with pm_path.
Note that a sample create looks like this now:
rpc.py construct_compress_bdev -b NVMe0n1 -p ~/pm_files -d compress_isal
And that devs need to pay attention for the pathname they provide, its
easy to leave orphaned pm files around and they can get big.
Change-Id: Ifb5245c922461bbecec4bef266bdeb25e8b87f31
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452235
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Needs to be based on the compressed vol size which is smaller
than the backing io device.
Fixes issue 763
Change-Id: I917c98e86a0755e503d5ba3d4b6c02e42f9ed709
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452158
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It used to be that we would get async events very infrequently. However,
with the introduction of SRQ, this number has gone up tremendously.
Change the way we report our these events so that we don't spam/confuse
people running the target.
Change-Id: I33070281fa854cbc17784d61bbbb870196ca8780
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452159
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This script is not general purpose like gen_nvme.sh,
so move it to the test directory at least for now.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I22df9375a8fcd585884523f22dae8ba9354768d3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451785
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
If there are outstanding recvs for a qpair when it is destroyed, we need
to clear the qpair from it before reposting it. Otehrwise, we have a
potential heap-use-after-free of double free (depending on whether the
recv completion is in error state or not).
See github issues #730
Change-Id: Ic2009c761cbcc5e89174f62fbd0872d0489c67ca
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452122
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
At some point this parameter may have been a bool, but it's
not now - so we need to explicitly pass SPDK_BLOB_READV or
SPDK_BLOB_WRITEV.
Otherwise we end up trying to write the iovec array as the
data buffer when executing this operation later - since we
passed "false" which is treated as 0 which is
SPDK_BLOB_WRITE (not SPDK_BLOB_WRITEV).
Fixes issue #603.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I50df736216c4a88b40604722c021e204c7fac623
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452157
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Nvme latency tests
IOPS vs. Latency at different queue depths
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Change-Id: I1192a18fa05f36c74385d286e86db571d52b9224
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/424063
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
At the RDMA level, we allow processing requests that should contain a
data transfer, but specify a length of zero to be passed up the stack
without a data buffer. See spdk_nvmf_rdma_request_get_xfer. In the case
of the reservation requests, we weren't checking whether req->data was
NULL before trying to copy into it causing us to segfault if we got a
malformed reservation request.
Found when using the fuzzer.
Change-Id: I320174ec72a8d298ab6ca44ef6a99691631f00ca
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451786
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Other threads are referring to this memory.
Change-Id: I9689a1b64a1f032ad479ec85095d2575dcab3a7f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452130
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We are switching to a method where we clone the db bench dir in
each build before running tests.
Also update the commit ID to point at the proper place.
Change-Id: I0eeba7bf7118e7da367b1405ae7322668eea3221
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451984
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There's some more work needed to clean this up, but this
at least gets RocksDB working for now after the following
patch which enables dynamically specifying the RocksDB
commit ID.
Note that for now, we've modified the RocksDB BGThreadWrapper
to call SpdkInitializeThread() explicitly. We'll be able
to move that in the future, but for now we check whether the
channel has already been allocated so that this extra
SpdkInitializeThread() effectively becomes a nop.
Note that for the main thread, g_fs hasn't been set yet, so
we can't allocate the thread_ctx. So we still need an
explicit SpdkInitializeThread() call in the main thread.
This has the nice side effect of removing the need for SpdkEnv
to override Env::StartThread - so remove all of the code associate
with that.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1e8d12b74e688953e15d5d6df58b93e3f5b74c3d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452112
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reset the device to its factory defaults.
Change-Id: I43f7dc8fb7bd5226283a4762beac0e2cf016f698
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445253
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This test is causing intermittent failures on the test pool.
Change-Id: I6be745700ee34813d49800acf689dc35d6c88ef4
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451998
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Assert that spdk_nvme_ctrlr_get_ns() does not return NULL.
If display_namespace() would proceed with ns == NULL,
functions below will segfault since the input is not verified there.
Change-Id: I12c4b617aca703f07275fbc6ab593b42c25e2ccd
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451830
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Run given fio config in loop X times. We use that later
to calculate the average of runs.
Previously the loop was done in CI but it's better to do
this in script.
Change-Id: Ie4126f504b2c027a1d6b4b4520152e89aadb4794
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450946
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We use JSON configuration test already configure every subsystem so we
piggyback notifications testing here to not duplicate work.
Change-Id: Ib1334951fba60de390e6b40f653cf9cc1d32c144
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445337
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
_spdk_bs_blob_list_remove function returns only 0
so it can be changed to void function.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I1827d783a7cd18caf831275554e33f398b0b962f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451783
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are no guarantees of the order of completion
of NVMe IO submission queue so wait for write completion
on specific chunk before submitting another write to it.
To control chunk occupancy split IO to child requests
and release chunk in IO completion callback.
Change-Id: I44147a21b528a7f33fb92b9e77d7de8f5b18f8ff
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449239
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-by: Claire Jihyun In <claire.in@circuitblvd.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I7a7667e1c4e6321150e5bc8eb4287fb61847ccb5
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450174
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Will be required for when we support AESNI XTS and there's a few free
bug fixes so go ahead an udpate now.
Fixes#710
Change-Id: I3dcc395018aa8378352d7d8a7d537df122f5f75f
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449357
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Block operation that should not be done simultaneously.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I3cab510377a49be4e5847ba37a6218f0025c0db6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450014
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently someone can create clone while blob is being
opened for deletion. This patch moves check for blob if
it is a snpashot after the blob is opened.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ia4b8b7cb956522a29784aa349d677eb87886e4db
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451682
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Also make some modification for invoking process in
nvme_manage tool.
Change-Id: Ib54db43d7336d3e839e7d9317c292b9a57b38f80
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445059
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently, if the Bdev subsystem initialization fails, the initialization failed
module does not call the fini function cleanup resource.
However, null module use the 'spdk_io_device_register' and spdk_zmalloc to request
resources. In failed path, it will cause resource leak when exiting the app.
To avoid this, it will cleanup resources when module initialization fails.
Change-Id: Ib1a89e5238252d69b6e64ea02a0bd826661349a5
Signed-off-by: Tianyu Yang <yangtianyu2@huawei.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450105
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch won't fix issues related to the need for the latest
ipsec with 19.02 but it is needed for that patch to pass.
Change-Id: I8e2d984d85b355d88edfb9c90c159c8aa0a5362d
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451788
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
