This API is a helper for getting the full discovery
log page from a discovery controller. It will read the
log page header to get the total number of entries,
allocate a buffer for all of the entries, and then
issue a series of get_log_page commands to read each
4KiB worth of entries.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I02666ef5adcb9fc8825a221655811ace708f97b8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10564
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The NVMe bdev module will support two features, delayed reconnect and
delete after multiple failures of reconnect to improve error recovery.
The recently added two APIs, spdk_nvme_ctrlr_reset_async() and
spdk_nvme_ctrlr_reset_poll_async(), were not good enough.
spdk_nvme_ctrlr_reset_ctx was not necessary. It had only a pointer to ctrlr.
Using a pointer to ctrlr directly saves us from undesirable malloc error
processing.
Separate spdk_nvme_ctrlr_reset_async() into spdk_nvme_ctrlr_disconnect()
and spdk_nvme_ctrlr_reconnect_async(). spdk_nvme_ctrlr_disconnect()
disconnects ctrlr including disconnecting adminq.
spdk_nvme_ctrlr_reconnect_async() moves the ctrlr state to INIT.
Then rename spdk_nvme_ctrlr_reset_poll_async() by
spdk_nvme_ctrlr_reconnect_poll_async().
Finally deprecate spdk_nvme_ctrlr_reset_async() and
spdk_nvme_ctrlr_reset_poll_async().
The following patches will change the NVMe bdev module to use these new APIs.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id1d6858dcdc5fc2e9db0a6ebf3f79cab4f9bbcb7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10091
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Allow to return more than one memory domain.
This change aligns bdev and nvme API and provides
more flexibility for custom transports.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ica9b12ad8463c361be6cb62ee2c0513eec0b486d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9546
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is needed for reporting additional information in JSON RPCs
Change-Id: I45da2ea78cd5415f7536130b6793ca29e929b86e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9338
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This new API signals that the ctrlr will soon be
reset. This allows the transport to skip unnecessary
steps in following calls to the driver prior to the
reset - for example, skipping PCIe DELETE_SQ/CQ
commands when freeing an IO qpair.
Note that if we are deleting a qpair after
prepare_for_reset was called, and the qpair is
still waiting for a CREATE_IO_CQ or CREATE_IO_SQ,
we cannot poll for those commands to complete,
but we also cannot free the qpair immediately.
So set a flag for this case to defer the
destruction until the outstanding CREATE_IO_CQ or
CREATE_IO_SQ callback is invoked (typically as an
aborted command when the reset happens).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I34c6276ae71e7d61ad4a3720f1a985b1ee96bd8b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9249
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Expose the already existing nvme_ctrlr_get_cc as
spdk_nvme_ctrlr_get_regs_cc, similar to spdk_nvme_ctrlr_get_regs_csts and
spdk_nvme_strlr_get_regs_cap etc.
Signed-off-by: Tomasz Bielecki <tomasz.bielecki@wdc.com>
Change-Id: Ibfcf6fbe64dee3719f381184fb728ab6e4d52526
Signed-off-by: Tomasz Bielecki <tomasz.bielecki@wdc.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9220
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krishna Kanth Reddy <krish.reddy@samsung.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Cleaning up the API, implementations were removed in 7dbe0e7c.
Signed-off-by: Tomasz Bielecki <tomasz.bielecki@wdc.com>
Change-Id: Iae25bbb301da123f9e784678d4c4f0b8d39f262e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9221
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These functions accept extendable structure with IO request options.
The options structure contains a memory domain that can be used to
translate or fetch data, metadata pointer and end-to-end data
protection parameters
Change-Id: I65bfba279904e77539348520c3dfac7aadbe80d9
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6270
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Implement an async variant of spdk_nvme_ctrlr_reset(). This initial
implementation only allocates a context and returns it to the caller,
relying on the caller to poll the context to execute the existing
spdk_nvme_ctrlr_reset() implementation.
Wire up spdk_nvme_ctrlr_reset() to use this async variant to verify
that NVMe controller reset still works.
Signed-off-by: Jonathan Teh <jonathan.teh@mayadata.io>
Change-Id: I75d4b75dbf5897db452ee65286aef5a4eb839fca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8330
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Nvmf/vfio-user uses this API to map NVMe command sent from
VM from Guest Physical Address to Host Virtual Address, so
now we moved this API from the nvme library to nvmf/vfio-user
as an internal API.
UT code will be added back in coming patch.
Change-Id: I54817fc9811ccd9ddd97b3aa6762a2fce4bbdda6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8574
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Add a new function spdk_nvme_detach_poll() to simplify a common
use case to continue polling until all detachments complete.
Then use the function for the common use case throughout.
Besides, usage by simple_copy application was not correct, and
fix it in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic14711cd8478bf221c0fe375301e77b395b37f26
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8509
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We map the SPDK_NVME_TRANSPORT_* values directly to
the NVMe-oF trtype values. Since PCIe isn't
Fabrics, we choose 256 which is outside of the
8-bit trtype range of values.
So we can just check if trtype >= 256 to determine
if the trid is for fabrics or not. This is
preferable to checking PCIE || VFIOUSER in case
additional non-fabrics transport types are added
in the future.
I considered taking a trid as the parameter instead,
but went this route since it is consistent with
the existing spdk_nvme_ctrlr_is_discovery().
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib62ff4d30549b2324486c81f2dce67f0f1741e9b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8077
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The API `spdk_nvme_map_prps` is used in nvmf/vfio-user to
remap VM's NVMe command data buffer to local virtual address,
and for command using PRP, there maybe multiple pages, when
parsing the PRP list to local IOVs, we need a parameter to check
that the maximum number of vectors can't exceed the IOVs, this API
can't meet the requirement, while here, we add a new API `spdk_nvme_map_cmd`
and with a new parameter `max_iovcnt` to fix this case, and it can
also cover the command using SGL in the coming patches.
Change-Id: I71063524bed16ee3434103867a556d3741e55326
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7278
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These are interface functions that can be used by
an application e.g. spdk_nvme_perf or bdev_nvme
library. The next patches will add usage of these
functions.
Change-Id: I33b88e0e713c2ea5967f9241885e3257c5070577
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6300
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This API has been deprecated since SPDK 20.07,
see commit (b2947f52).
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Idb45906c81ea5682c6a67def0265910266d861b5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6629
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Add a function to get the number of max active zones for a zoned
namespace.
The value inside the identify namespace struct is a 0's based value,
where 0xffffffff means unlimited.
If unlimited, the addition will overflow and return 0,
which is the intended value to represent unlimited for this API.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ia09e3db157ca0afadbd3ca4032eedd7bcd88248c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6443
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: sunshihao <sunshihao@huawei.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add a function to get the number of max open zones for a zoned
namespace.
The value inside the identify namespace struct is a 0's based value,
where 0xffffffff means unlimited.
If unlimited, the addition will overflow and return 0,
which is the intended value to represent unlimited for this API.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I4223146bc1ddf90486892a0af5fe5ce006dc5fd3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6442
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: sunshihao <sunshihao@huawei.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We already have support for spdk_nvme_zns_zone_append(),
add support for spdk_nvme_zns_zone_appendv() (zone append with
NVME_PAYLOAD_TYPE_SGL).
_nvme_ns_cmd_rw() currently performs verification of the SGL,
if the parameter check_sgl is set. This parameter is set for all
calls with payload of type NVME_PAYLOAD_TYPE_SGL.
In order to be able to perform the same check_sgl verfication on
zone append vectors, we need to refactor _nvme_ns_cmd_rw() a bit.
Setting check_sgl ensures that _nvme_ns_cmd_split_request_sgl() or
_nvme_ns_cmd_split_request_prp() gets called.
These functions will split an oversized I/O into several different
requests. However, they also iterate the SGE entries, verifies that
the total payload size, total SGE entries is not too many, and that
buffers are properly aligned. A proper request will not get split.
For zone append, splitting a request into several is not allowed,
however, we still want the verification part to be done, such that
(e.g.) a non first/last SGE which is not page aligned, will cause
the whole request to be rejected.
(In the case of spdk_nvme_ns_cmd_write(), a non first/last SGE which
is not page aligned will instead cause the request to be split.)
An alternative would be to try to rip out the verification part from
_nvme_ns_cmd_split_request_sgl() and _nvme_ns_cmd_split_request_prp().
However, that is non-trivial, and would most likely end up with a lot
of duplicated code, which would easily get out of sync.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I2728acdcadeb70b1f0ed628704df19e75d14dcca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6248
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Sometimes it is more optimal to get the zone size in number
of sectors, instead of in number of bytes.
Therefore, add a new spdk_nvme_zns_ns_get_zone_size_sectors()
function to get zone size in number of sectors.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I0fe67e00a3d74dd27acfc895ae97448d995b89a3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6416
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Identify application prints the PMR details if it is supported
Signed-off-by: Krishna Kanth Reddy <krish.reddy@samsung.com>
Change-Id: Iaba4c15e18e1402035b11a34b2defe8078855751
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6209
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This function allows applications to specify whether
they wish to allow probing a newly attached NVMe
PCIe SSD.
The env layer will only even probe devices that have
been allowed. By default, this is all devices, but
if the user has specified some list of
allowed PCI addresses (via spdk_env_opts pci_allowed)
then newly attached PCIe devices are implicitly not
allowed. This API allows applications to add
device addresses to the allowed list after the
application has started.
This API will be useful for use cases where multiple
SPDK processes are running on one server, and assignment
of PCIe SSDs to those processes are based on some function
of the SSD's PCIe address.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I919bc267f2ad9130ab5c875ff760a301028b047e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6184
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
This patch is used to add spdk_nvme_poll_group_get_optimal
public API.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Iee34c89e0e1ff1f81167b18e198c144ca28f71de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3311
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The Zone Append command is an optional command in the Zoned Namespace
Command Set.
Zone Append differs from a regular write, in that the command is not
given an exact LBA of where to write the data.
Instead the user has to set the zslba field to the start of a zone,
and the data will be appended to that zone.
The actual LBA where the data was stored is returned in the
spdk_nvme_cpl, where Dword0 contains 31:00 of the ALBA field,
and Dword1 contains bits 63:32 of the ALBA field.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Iabae1b3456bfbb62c07b63d79afe9a14e460fe83
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6013
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add two async API for Directive Send and Directive Receive.
spdk_nvme_ctrlr_cmd_directive_send;
spdk_nvme_ctrlr_cmd_directive_receive;
Signed-off-by: sunshihao <sunshihao@huawei.com>
Change-Id: Icb6974f74902df1512a5ffa9835188132634291b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5803
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When a device is removed, we should use the remove_cb
that was specified when the device was originally probed
and attached, if one was set.
Also add a new spdk_nvme_ctrlr_set_remove_cb API. This
can be used for cases where a different remove_ctx is
desired than was specified for the probe call. This
also enables setting a remove_cb when using connect APIs
which do not have a way currently to provide a remove_cb.
This also requires fixing the bdev nvme module, which
was depending on the previously errant behavior.
Fixes issue #1715.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id848b39040099ff7a21fe57ea6b194a8c25ae015
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5510
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The zone append command, which is part of the Zoned Namespace Command Set,
has a maximum data transfer size that can be less than or equal to mdts.
Since zone append commands will not be allowed to be split, the user has
to be able to get the maximum zone append data transfer size. Add a
function that returns this limit.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I9da2672ea8a307ff62251c069a42f7540765e08b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5140
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add support for the ZNS zone management receive command.
An internal nvme_zns_zone_mgmt_recv() function is created
that matches the parameters of the zone management receive
function in the ZNS specification.
Convenience functions are provided for the following
Zone Receive Action: Report Zones.
Zone Receive Actions not implemented: Extended Report
Zones.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I23589a602336da5dffccec7230d07026a868e81b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4793
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add a function to get the number of zones for a zoned namespace.
Since the ZNS specification does not allow zone size == 0,
divide by zero should not be possible on a spec compliant drive.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I15e0ac8a72e244e248b7fb44f7156b182ecd98b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4792
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Add a function to get the zone size of a zoned namespace.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I89429fa2fd36307a8b34bdf91e3251c68596a48c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4791
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI
Add two new public APIs, spdk_nvme_detach_async() and
spdk_nvme_detach_poll_async() to detach multiple controllers in parallel
as a simple manner to users.
Hold the target controller to nvme_ctrlr_detach_ctx because users
will free any object which held it after returning spdk_nvme_detach_async().
spdk_nvme_detach_ctx holds all nvme_ctrlr_detach_ctx in a sequence
by linked list.
spdk_nvme_detach_ctx has a boolean variable polling_started to prevent
the user from calling spdk_nvme_detach_async() while
spdk_nvme_detach_poll_async() is called repeatedly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>i
Change-Id: Ib049c19f7ef24410b963fd5c777a21184f3012d1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4758
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add support for the ZNS zone management send command.
An internal nvme_zns_zone_mgmt_send() function is created
that matches the parameters of the zone management send
function in the ZNS specification.
Convenience functions are provided for the following
Zone Send Actions: Close Zone, Finish Zone, Open Zone,
Reset Zone, and Offline Zone.
Zone Send Actions not implemented: Set Zone Descriptor
Extension.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I9cc04776c249d2b9c515438b81a0f06aea4198fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4682
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Move ZNS specific functions to their own header file:
include/spdk/nvme_zns.h.
This is similar to how it's done for e.g. NVMe-oF with
include/spdk/nvmf.h.
This avoids cluttering the nvme.h header with ZNS specific functions.
A SPDK program that wants to use the spdk_nvme_zns_* functions will
need to include include/spdk/nvme_zns.h, however, this is similar
to how e.g. spdk_nvmf namespaced functions work.
This change is safe to do now, since there is no SPDK release with
ZNS so far.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: If39fab4e7a6924cc3bd67aa0c03e9c6de5f8a324
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4681
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add getters to the ZNS specific data structures, so that an
SPDK application, e.g. examples/nvme/identify/identify.c,
has the ability to get and utilize the information in them.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I26056161093cc811acb6840ff7e2068e5f6058f6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add spdk_nvme_ns_get_ana_group_id() and spdk_nvme_ns_get_ana_state()
to getthe ANA group ID and the ANA state of the given namespace,
respectively.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id5f1f7ee488a1eb2a7a77f9986a3bb89146628e0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4354
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In cases where the SPDK nvme driver is being used as a validation/test
vehicle, users may need to allocate a currently unused qid that can be
used for creating queues using the raw interfaces. One example would be
testing N:1 SQ:CQ mappings which are supported by PCIe controllers but
not through the standard SPDK nvme driver APIs.
These new functions fulfill this purpose, and ensure that the allocated
qid will not be used by the SPDK driver for any future queues allocated
through the spdk_nvme_ctrlr_alloc_io_qpair API.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I21c33596ec415c2816728a600972b242da9d971b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3896
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add support for getting the Command Set Identifier for a given namespace.
The SPDK_NVME_CAP_CSS_IOCS feature can be implemented on top of an old NVMe
specification. If the feature is set, retrieve the NS ID Descriptor List
regardless of the NVMe specification version. The quirk is still respected.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I7b257115ecb0d813ba75201c0f48960c7070dcc9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4085
Community-CI: Broadcom CI
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
A new API spdk_nvme_ctrlr_cmd_abort_ext() gets cmd_cb_arg as a
parameter, and use it to abort requests whose cb_arg matches cmd_cb_arg.
The caller can set the parameter qpair to NULL if it wants to abort
requests on admin qpair.
Hold ctrlr->ctrlr_lock throughout because abort request is submitted
to admin qpair.
The API is not critical for performance, and so initialize parent
data first.
The API is for a specific qpair, and so hold SQID in the parent,
and it is copied to the children. On the other hand, CID is set
to child when request to abort is found.
Use an new helper function nvme_transport_qpair_iterate_requests()
to add abort request for each outstanding request which has
cmd_cb_arg as its callback context.
The case is possible such that the request to abort is not outstanding
yet but queued. Hence abort queued requests which has cmd_cb_arg
as its callback context too, but it is done only if there is no error
so far.
If only queued requests are aborted and there is no outstanding
request to abort, complete with success synchronously.
If there is no outstanding or queued request to abort, return -ENOENT.
When any abort request is submitted, the difference between success
and failure is only bit 0 of CDW0 according to the NVMe specification.
We cannot the existing helper functions nvme_request_add_child() and
nvme_cb_complete_child() but can use nvme_request_remove_child().
nvme_qpair_submit_request() may use only nvme_request_remove_child()
from these three helper functions. Hence we use req->parent as other
types of request do.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3a271c6542f8e2e6b425b3bf6151f41e924bc200
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2039
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Having functions without qpair on the interface allows for wider usage
e.g. by nvmf layer.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I3a51ad53f00eb29e2ba2681ef4ff0cc2a197b65d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3176
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
spdk_nvme_cuse_update_namespaces() API allows application
to repopulate namespaces on NVMe CUSE devices.
Change-Id: I5375b13bcc91b17cd26b4dc6f02d83dc33826542
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/658
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
