Since we are usually going to be removing multiple events from the queue
at once, use the DPDK burst dequeue interface to improve efficiency.
Also rework the event queue runner to always process a fixed maximum
number of events per timeslice for simplicity. This removes the
rte_ring_count() call from the hot path and improves fairness between
events and pollers.
Now that events are dequeued in bulk, we can also put the event objects
back into the mempool in bulk. Add an env wrapper around
rte_mempool_put_bulk() and use it to free all of the events at once.
Basic performance benchmark using test/lib/event/event/event -t 10
is improved: previously ~40 million events per second, now ~46 million
events per second.
Change-Id: I432e8a48774a087eec2be3a64c38c339608af42a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This removes the 2 bytes of SenseLength from the beginning of the SCSI
sense_data buffer, so now the offsets within sense.data match up to the
expected values from the SCSI spec.
Change-Id: I9188560096a9ec5a8fcf83bec95201521b127494
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_nvme_probe() will now provide a struct spdk_nvme_probe_info to the
probe and attach callbacks in place of the PCI device pointer.
This struct contains the useful information that could be retrieved from
the PCI device during probe.
The goal of this change is to allow expansion of the probe information
in the future when other transports (specifically, NVMe over Fabrics)
are added that do not necessarily use PCI addressing or device IDs.
Change-Id: I59a2a9e874e248ce5fa1d7f4b57c8056962ff3cd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the new public PCI ID structure in the NVMe library to replace the
previously private struct pci_id.
Change-Id: I267d343917f60bdae949a824bc0fe67457cbbc0d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
- Split the part that gets a PCI device's address into its own function,
spdk_pci_device_get_addr(). This is useful outside of the comparison
function and is orthogonal to comparing addresses.
- Make the comparison function take two addresses instead of a device
and an address. The more general form will be useful with addresses
that are not directly associated with a device. Because of this, also
rename the function from spdk_pci_device_compare_addr() to
spdk_pci_addr_compare().
- Return a signed value similar to strcmp() so that addresses can be
ordered, not just compared for equality.
Change-Id: Idf304454af09ea57f1e1d5dc3a39b077378cecad
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add a field to struct spdk_nvme_ctrlr_opts that allows the user to
specify a keep alive timeout, and add automatic submission of Keep Alive
commands to spdk_nvme_ctrlr_process_admin_completions().
Change-Id: Ib282299a571d8edc59c7933418751bc3a6c98b40
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
jsoncat parses the input file using the SPDK JSON parsing library, then
prints it back out using the SPDK JSON writing library.
Change-Id: I6f35533cdb4977306ff50be9a706a783a62cdfc1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch adds support for spdk_bdev_readv in scsi layer.
It also fixes write so that it uses multiple iov's instead of one.
Currently we should use only task->iov (for single vector operation)
or task->iovs (for multiple vector operations).
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ia3b2f6d18fd212b11d7b63b11dc46ec5bbc74788
Make the quirks mechanism generic in preparation for quirks for devices
from other vendors.
Change-Id: Ic003b020a38f1b966021db30e3f2bce9cf6a1a0d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch removes reduntant field in spdk_scsi_task and
fixes all logic to use iov.iov_base
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ie2fa1e2357b6383c118d05aec9206d1c60537d40
Add a transport function to get the max data transfer size to break the
dependency on NVME_MAX_XFER_SIZE.
Change-Id: I846d12878bdd8b80903ca1b1b49b3bb8e2be98bb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move the PCIe-specific admin queue setup to nvme_pcie_ctrlr_enable.
Change-Id: Ic3f5625fa804f719040ba86b7fc3bf82fcc057c0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
A status member of spdk_bdev_io structure is set after the if block.
Therefore a status parameter should be checked instead of a status
member.
Change-Id: I4030a7fcdb36d9c589802ec5b4e424591dc2a3b6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The value of CAP should not change during the lifetime of a controller,
so read it once during ctrlr_construct and store it in the ctrlr.
Change-Id: I089d4141b4e0c9aae6c53abf9bb0ef6577dabe0b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rather than embedding adminq directly in the spdk_nvme_ctrlr structure,
change it to a pointer to a spdk_nvme_qpair. This is necessary to allow
the transport to extend the qpair structure.
Change-Id: I041685d5037088cf56d046fe99bf204edcfc57b1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This requires a couple of related changes:
- I/O queue IDs are now allocated by using a bit array of free queue IDs
instead of keeping an array of pre-initialized qpair structures.
- The "create I/O qpair" function has been split into two: one to create
the queue pair at startup, and one to reinitialize an existing qpair
structure after a reset.
Change-Id: I4ff3bf79b40130044428516f233b07c839d1b548
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make the transport ctrlr_construct callback responsible for allocating
its own controller.
Change-Id: I5102ee233df23e27349410ed063cde8bfdce4c67
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These are specific to local NVMe PCIe devices, so move them out of the
generic NVMe code into the PCIe transport.
Change-Id: Iea2056a4c438b7d3a303b4b5e977ce7aa9e58c05
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This changes as little code as possible while still creating
a single public API header. This enables future clean up
of the public API and clarification of the exposed
concepts.
Change-Id: I780e7a5a9afd27acf0276516bd71b896ad301c50
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This will allow factoring out PCIe-specific code into a swappable
transport so that NVMe over Fabrics host support can be added.
Change-Id: I4df74dd268d655e3b36e8d6114ebe7d79a24844d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change tests to use read/write vector and non-vector versions.
Change-Id: I5a97568d3dc2f61d44721f4b0c75331baad417bb
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This patch enables vector operation for bdev drivers aio, malloc and
nvme.
The rbd driver still handle only one vector.
Change-Id: Ie2c1f6853bfd54ebd8039df9a0305854ca3297b9
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
For the nvme readv/writev APIs, the PRP checking logic was
incorrectly failing single SGE payloads that were larger
than 4KB. This patch adds a test case for this scenario,
and fixes the PRP checking logic.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6357d620599666046d2cb74d7923dac1f75418c5
Explicitly include the pthread header after removing some headers that
implicitly included it.
Change-Id: I39fe272acfcc63d3888d2430137de2c3426f1af6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use standard GCC style atomic operations instead of
the DPDK calls. The DPDK calls end up translating
to the gcc standard inline calls in the generic
case anyway.
Change-Id: I0ea760c4e23c3660b082a803bbc174de7250f365
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Remove #includes for all DPDK headers that weren't
necessary.
Change-Id: Ib02522e0f04e64a1c98afceb7508cc0e8d931a9d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This was only used for debugging. Everywhere else
used the spdk_memzone abstraction.
Change-Id: I8a828ea3c7abccb66c8a027cb13de43c560ff7a1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This converts some, but not all, usage of rte_mempool
to spdk_mempool. The remaining rte_mempools use features
we elected not to expose through spdk_mempool such as
constructors, so that will need to be revisited.
Change-Id: I6528809a864ab466b8d19431789bf0f976b648b6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change the type from int to bool and change the name
from data_ref to data_from_mempool.
Change-Id: If1fc11761e63561443ed44d6a0860e416e424df8
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
This is required since pollers are now directly removed
(rather than scheduling an event) when the unregister call
is made on the poller's lcore.
Without this change, if a poller is registered then
immediately unregistered, the unregistration will seg
fault since the event adding the poller has not executed
yet.
Also add a test case that exhibits the sequence of events
described in this commit message.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5c6ba0ee224ac1f8f3ebb8e7571714e718bd42db
Use the env library to perform all memory allocations
that previously called DPDK directly.
Change-Id: I6d33e85bde99796e0c85277d6d4880521c34f10d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
