Refactor the discover log page processing into a loop that calls a
function for each log page entry. This sets us up to add support for
multiple Get Log Page calls to handle larger discovery service lists.
Change-Id: I85676ada375d0dadda2a3f4ab6331123ac7aaf60
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Note that the offset is not actually used yet, just sanity checked.
Change-Id: I9464dc934e94e3d38ac0d474fce876552650f92b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows hosts to determine when the discovery log page has changed
when reading it across multiple Get Log Page calls.
Change-Id: I3c3459959c6246a88938e4f82e3e0046419e7d00
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This keeps the existing subsystem list (and therefore the discovery
service log page) in order when new subsystems are added dynamically.
Change-Id: I071639be0fef4139f8f017b433185c786ae55378
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This isn't used yet in the NVMe library, but it will be necessary later
for supporting non-IPv4 addresses.
Change-Id: I167ce63ad25b0e0c9aa192b12d764c8d078e67f9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This better describes what the field controls (it does not affect the
admin queue size).
Change-Id: I851ae46fb4ed0fce819af07ae235824e0fc817e6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
For requests split in _nvme_ns_cmd_split_request() the payload offset is
set after children are created using recurrent call _nvme_ns_cmd_rw().
This makes impossible to reset SGL to proper offset in
incomming patches that split non-PRP complaint SGL requests.
To change this the payload offset is set after each request is allocated
in _nvme_ns_cmd_rw() not in _nvme_ns_cmd_split_request().
Change-Id: I9d3b2e3bbd9d93a4c8a37e1db8c4e01276e2cacb
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This is preparation for handling non-PRP compliant SGL.
Change-Id: I445790f9802292971256cf821d9730814c95a073
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This is preparation for handling non-PRP compliant SGL.
Change-Id: I49c3745498411c5ff9e17cd08f181d4d434c2d08
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Comply with the definition format used by other bdev
modules
Change-Id: Iac108bac540687b32fea4bb70374c22534c60aa0
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The vendor ID for Intel shoudl be "INTEL", according
to the following page:
http://www.t10.org/lists/vid-alph.htm#VID_V
Change-Id: Ib9611e5604c8b5e3eaec8101548aaf4a3c45597a
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Don't leave garbage from previous discover entries in the trid we are
returning to the user.
Change-Id: I60ae5932db4a95cedb8df1ff98a2479220b55ce4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The other simplifications to probe_info and trid made the
trtype argument redundant.
Change-Id: Ie7bea4e2204e690dc4909eeacd065e0722b53272
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The probe_info was reduced to just containing a
transport_id, so remove probe_info entirely.
Change-Id: Ica9a22d126cd14e282decd3eea1a0afe0460f099
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This can be obtained by parsing traddr into a pci_addr,
then getting a handle to the pci_dev and asking for all
of the pci information.
Change-Id: I1948cbd3ec65611293192ef5558ace19dd444d4c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This function will return a device handle from a pci
address.
Change-Id: I323d92c71014ef571f3df9f19c2ec887844707e8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This bug was preventing multiple calls to spdk_nvme_probe() from
working, since the first call would return 0 from all of the DPDK driver
init callbacks and prevent other devices from ever being enumerated in
subsequent calls.
Reported-by: Tsuyoshi Uchida <tuchida@us.fujitsu.com>
Change-Id: I871aa170bbd03be111604eeabe3a7a7a4f40ce89
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the standard quirk mechanism to specify which devices
need software assisted striping.
Change-Id: Id8156876a90b4caf9d687637e14c7ad4a66ceda6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The emulated NVMe controller exposed by virtual subsystems does not
provide the Intel vendor-specific commands and behaviors, so it should
not use the 0x8086 vendor ID.
Change-Id: Iab4f0513d30f610feb62b1899da1b6316f11691c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This way, all new controllers discovered will be initialized
in parallel.
Change-Id: Iebedb3905eb2787a3708f74425afae40ca31253d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
If the first call to spdk_nvme_probe probes a device and
the driver elects not to take it, still call the probe
callback for that device on subsequence calls to
spdk_nvme_probe.
Change-Id: If06467cf6796c827a0bbfba6e36d5b91534526fc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Move this down a level so it happens on all paths.
Change-Id: Iea9913f0e102353882466c8dea4ee39abb857520
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Scanning the transport may result in both new
devices and removed devices, so pass the callback
for both operations.
Change-Id: I6f73dbe6fd7cf61575c354b43f8ae3e2a01e2965
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Simplify the arguments to nvme_transport_ctrlr_scan to take
a transport id that identifies the discovery service (or
NULL to scan PCIe).
Further, separate scan into two functions - scan and attach.
Scan is for scanning an entire bus, attach is for a specific
device.
Change-Id: I464f351a02a04bc5a45096dcf5dc8fc5ac489041
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Instead of repeating the fields, just embed a transport_id.
Change-Id: I282704c9d59784abd5f7c93be4e47c673fcf6dde
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is a small step toward making discovery more like
scanning a local PCI bus.
Change-Id: Ie7149ad060f2eeb56939b1241187bdf09681f2aa
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Before adding readv/writev support in nvme_rdma,
using this patch.
Change-Id: I25ff0df61d0346f22560d011158d7f80e72007ea
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
We cannot quit the process when user did not Logout from the session,
because the active connections always bigger than zero. User cannot
use Ctrl+C to quit SPDK iSCSI target. Add a new state to connection
to avoid destruct connection more than once.
Change-Id: I8efa79aa47534bd6ead965713769f751d9802e47
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Drop the complicated buffer size/strlen math and just split the version
string formatting into two cases depending on whether the tertiary
version is set.
Change-Id: I4b4983cb8805e8734c408f473dd8c592ec8e8138
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The printf # specifier adds 0x for %x values, but the field width then
includes the 0x part, so for example printf("%#04x", 0x1) prints "0x01"
rather than the intended "0x0001".
Rather than increasing the field width, just manually insert the 0x in
the format string and drop # for less confusion.
Change-Id: Ie6044619a22b51b39562bfa5c0c0239933bf38c8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
