Also add opal_revert_cleanup at the start of autotest.sh
because opal test might fail before revert and the drive
might be kept locked and will cause deny of service in
later test.
Change-Id: Icb9d571c59804daa559784cee457c7e804eff121
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471973
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add rpc commands bdev_opal_lock_unlock, bdev_opal_new_user.
Admin can add new user for opal bdev created and the user can
lock/unlock the bdev by himself.
Change-Id: I9a1e360399617b5a039dc5353097ab525c7eb964
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471475
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously, get locking range info will allocate
memory everytime. Thus calling this function multiple
times will cause memory leak.
Now, we allocate only if it is NULL. If it is not,
then we just memset to zero.
Change-Id: If048416a2056176f86206a33e2b5db210288fe4f
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472112
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Some nvme drives might take 6-7mins for
this operation. Thus, introduce async function
to avoid waiting.
Change-Id: Id48478aec653d3fb75a3c5ce75d4997284ed016c
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468916
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Init commit for opal vbdev. Opal vbdev is built based on
bdev part module. We split nvme namespace to spdk_bdev_part
with user specified offset and length. And then use this
configuration also to set up locking range for Opal.
Use linked list g_opal_vbdev to track all configuration for
each vbdev. And use g_opal_base to track the part_base for
all vbdevs.
This patch only shows the process for creating/deleting a vbdev
for an opal-enabled nvme ctrlr.
change-Id: I6073637d7360ebdd6b53fb7b6a01ad73f1daa98e
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468190
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Initialize the hotplug structures if the device is hotplug capable.
Change-Id: I2bab4ec820f37f352d79203e3ad37aef31bdc3c6
Signed-off-by: orden smith <orden.e.smith@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470650
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Check PCIe Capability slot_implemented field before hotplug structures
instantiation.
Change-Id: Id40c10839e51b238a6ffd64592052604d50e2850
Signed-off-by: orden smith <orden.e.smith@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470649
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Changed the way the devices are enumerated, so that only the first one
performs active enumeration and stores the result on the config bars of
the devices, while subsequent ones use those saved values. It prepares
the code for hotplug support, as it'll make it easier to detect it.
Change-Id: I38c8eada91f573a13d1739a73bff3614ae7e1f89
Signed-off-by: orden smith <orden.e.smith@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469936
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Moved the base / limit register reset to a separate function. It'll
make it easier to perform the reset only under specific conditions are
met (e.g. only during the initial setup).
Change-Id: I5231e6d5a1e1673885bf549b1b6761092b4b62be
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472248
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added application allowing for probing and changing the state of the
LEDs of the devices behind the VMD.
Change-Id: I6c513c556d8e3de8ecf9b5783d7c66ac3b9c6a71
Signed-off-by: orden smith <orden.e.smith@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470652
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch adds support for LED management of the devices behind VMD.
It's possible to set four different states: off, on (fault), 1Hz
blinking (rebuild), and 4Hz blinking (identification).
Change-Id: Icce25d0b46c1c4bed803f18201606203980ccc38
Signed-off-by: orden smith <orden.e.smith@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470651
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This example application only enumerated VMD devices but didn't do
anything else. Now it goes over all PCI devices and prints those behind
the VMD.
Change-Id: I6134088e820a90c203200294540cb8174b1a492e
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471480
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
The function allows the user to get string representation of the type of
a PCI device.
Change-Id: I02abcd9fc98ba912ca4d7936be22e9d5b4950ea2
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470648
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
The startup tool is used to verify nvme device startup
time.
Change-Id: I2bee729c154175e1bda94c8e410d997bdc9a6eff
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470001
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When splitting bdev's, if we run out of child IOVs, we have to
make sure that we end block aligned. That may require us to
shorten or eliminate one or more child IOVs to be picked up
on the next split. If we eliminate enough such that there
are no IOVs for this split IO, just continue and the next
split completion will kick off another split to pick up
the remaining data to be transferred.
Fixes issue #981
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: If2bfbe5f0862295e1d74cbea00692890a2178967
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471313
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
We recently had two patches merged to DPDK master
to improve rte_eal_init() execution time especially
in secondary processes. These will be merged in
the DPDK 19.11 release. Include them in our submodule
so that SPDK users can leverage them now rather than
waiting for DPDK 19.11.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0fe006d2fd02b327a3f1e0367c94e984ab176e01
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472106
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This will be the canonical way of informing the user that we have lost
the qpair connection somehow.
Also update all of the functions that will return -ENXIO to the user.
Change-Id: Ic6c7c2d0e07e9d3e857a3476bb6b91fb4b6454fa
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471416
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Failed is not a final state for either fabric or pcie controllers. We
have historically not allowed resets in the failed state, but we should.
Instead of checking for the failed state, we should check for the
removed state. If the controller is removed, then we cannot even attempt
a reset.
Change-Id: I2c1a3d85db84f84cd1895cbfaf16575c8b496155
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471415
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We no longer need the private function with a public wrapper.
Change-Id: I0d24dfb282461174729d3eb649c78ac27e42fc8d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471552
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Also, adds a field to the generic qpair for future use in other
transports.
Change-Id: Ie5a66e7f5ebfec1131155fc07e3c671be814fb9b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471414
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We shouldn't always fail the whole controller if we get a failure on an
individual qpair.
Change-Id: Id0c90af83e5231593a895be66e7a7de48939e240
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471660
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The way these two functions were separated previously represented a
pretty sserious bug when doing a controller reset.
If there were any outstanding requests in the rqpair, they would get
overwritten during the call to nvme_rdma_qpair_register_reqs and the
application would never get a completion for the higher level requests.
The only thing that we need to do in this function is assign the proper
lkeys.
Change-Id: I304c70646daf9b563cd00badba7141e5e8653aad
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471659
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
check_enabled had a couple bugs in it that made it unfriendly for enabling
I/O qpairs after a reset.
1. It was calling nvme_qpair_abort_queued_requests before setting the
enabled flag to true. For applications that submit new I/O in the
completion callback for old I/O, this means you enter an infinite loop
of submitting requests, and then immediately completing them. SO
instead, wait for the qpair to reset, then just submit those requests to
the lower layer.
2. It didn't check whether we were already in the middle of calling it,
so we could reenter function calls like
nvme_qpair_abort_queued_requests.
Also, now that we have a coherent state machine for qpairs, we can limit
the enabling to a specific state in that state machine.
Change-Id: Ie0b74819a6b16839965bced47c33dec967f725a8
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470256
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
As the todo states later on in the function, the discovery controller
should really be initialized through traditional methods, but it was
hacked in. For now, enable the admin qpair to get past the non-standard
nature of this controller.
Change-Id: I2cbf1cd47d7249ae3d12bcfc2e8d21e8fb98df7e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471779
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This function is identical between the two transports.
Change-Id: If50b781259f224eb2c21de7da14564e6ce487650
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471778
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These will form the base of a little state machine for managing the nvme
qpair structure.
Change-Id: If6f6df38cc17221ac8fcb7d8c0d7e2e808897a99
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470534
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The driver has historically waited until we have to do a listen
before enabling the admin qpair. That is a very PCIe-centric mindset.
For fabric controllers, a lot of the early initialization operations such
as get_cc and set_cc are handled through the admin qpair so it should be
enabled before we begin the initialization process.
As a side effect of this cahnge, the internal API
nvme_ctrlr_enable_admin_qpair has been removed. It would have turned
into a one-liner.
Change-Id: Icd162657d01a85c227a3f20c295d0208e07ce44d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471743
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
This wasn't being done in the previous case which meant that I/O qpairs
were not being moved to the connecting state when connecting for the
first time. However, to prepare the way for a coherent state machine for
nvme qpairs, we need to ensure that all qpairs go through the same
states.
Change-Id: I3cfe799a003acd926b24c107ab1461a96239c1bb
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471753
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These functions are functionally equivalent. Just unify the way they
wait for completions so that they are completely identical and we can
merge them into a common function.
Change-Id: Id5d734b6ae613b3ac828d89853d986cdadfb211a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471936
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fix Python code for warning produced by pylint.
- C1801: Do not use `len(SEQUENCE)` to determine
if a sequence is empty (len-as-condition)
- W0611: Unused import * (unused-import)
- C0411: standard import should be placed before X
(wrong-import-order)
- C0411: third party import X should be placed before X
(wrong-import-order)
- C0412: Imports from package X are not grouped
(ungrouped-imports)
- W0212: Access to a protected member _exit of a
client class (protected-access)
Change-Id: I2c0e8379f962eb2957b428617836867b2e725aeb
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471482
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
After switch all management operations to asynhronus way, utlis connected
with polling are no longer needed, this patch removes that code.
Signed-off-by: Marcin Dziegielewski <marcin.dziegielewski@intel.com>
Change-Id: Ia30e733c51089b1659f79c99d8cd711945a98fa0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470353
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
New version of OCF library provided full asynhronus management API,
therefore this patch changes all uses of polling in management
operations in vbdev to asynhronous way.
Change-Id: I7bf76fa2919fac4a068ef5c39f5b667b2be68ff7
Signed-off-by: Marcin Dziegielewski <marcin.dziegielewski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470352
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch introduces error handling in register path, in case of
error in the middle of chain we will call vbdev_ocf_mngt_stop with
appropriate rollback path.
Signed-off-by: Marcin Dziegielewski <marcin.dziegielewski@intel.com>
Change-Id: I78e5796b7eda2fe0848d5533cdea283b17397b61
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468472
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In current code there is no possibility to clean up vbdev in case
of error during management path. This patch introduces new version of
vbdev_ocf_mngt_stop function, now developer can pass handle to
path with rollback functions and therefore clean up not full initialised
vbdev instance. Changes in this path also allows to pass status explicitly
to vbdev_ocf_mngt_stop function.
Signed-off-by: Marcin Dziegielewski <marcin.dziegielewski@intel.com>
Change-Id: Ie9684981e48d24b3e55e4b1ab828dc8c01baa838
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468471
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This path updates ocf library to version 19.06 and also introduces
all necessary changes required to integrate ocf bdev adapter with
new version of ocf.
Summary of changes introduces with new OCF in ocf bdev:
- ocf_env.h increased limit for memory operations, changed behaviour
of strncpy to less restrictive, both changes are required to run new OCF
- ctx.c changed functions to new from new OCF
- added new cache mode "write only"
- added missed cache modes wa and wi to RPC scripts
- rewritten spdk_rpc_bdev_ocf_get_stats function to use asynhronus
ocf_mngt_cache_read_lock
- used new asynhronus ocf_mngt_cache_flush instead of waiting for request
- removed no longer valid filed - cfg->device.min_free_ram
- changed expected result in metadata_probe_cb
Signed-off-by: Marcin Dziegielewski <marcin.dziegielewski@intel.com>
Change-Id: I83e4335e16600e4d22e6bb517931102de42d39e9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468132
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
To use zero copy bdev I/O APIs for write I/O, we have to allocate
iSCSI task before allocating data buffer because allocating data
buffer will be changed to spdk_bdev_zcopy_start() call and the
allocated iSCSI task will be passed to the call.
One critical change is that we have to read all data for the
current PDU even if handling the PDU is rejected. For that purpose,
use is_rejected flag and do not call iscsi_pdu_payload_handle()
is is_rejected is true. If iscsi_pdu_hdr_handle() returns negative,
close the connection, so return the state machine immediately.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ice77b7266af8ac392d9094478523e6e6fe6d131a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470413
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Insert _pdu_payload_ into iscsi_op_login(), iscsi_op_text(),
iscsi_op_scsi_read(), iscsi_op_scsi_write(), iscsi_op_scsi(),
iscsi_op_nopout(), and iscsi_op_data() to clarify that they
handle PDU payload.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id28ea90948118321c7889084149083bcc6bbd27c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471562
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Extract PDU header handling from PDU payload handling for all PDU
types, and then group them into a new function iscsi_pdu_hdr_handle().
Then the original iscsi_execute() is renamed to iscsi_pdu_payload_handle().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1fb1937cfaf502797f2c4edb3aeeb97d4697c7d4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471015
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To use zero copy bdev I/O APIs, we have to allocate iSCSI task
before allocating data buffer.
Hence we separate PDU header and payload handling for SCSI Data-Out,
and include iSCSI task allocation into PDU header handling.
Factor out PDU header handling in iscsi_op_data() into iscsi_pdu_hdr_op_data().
spdk_nvmf_tcp_h2c_data_hdr_handle() and spdk_nvmf_tcp_h2c_data_payload_handle()
in lib/nvmf/tcp.c are used as a reference implementation.
Use pdu->task to pass the task allocated by iscsi_pdu_hdr_op_data() into
iscsi_op_data().
In iscsi_op_data(), if it sees pdu->is_rejected is true or pdu->task
is NULL, do nothing. Besides, check LUN hot plug again to separate
PDU header handling and PDU payload handling.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5074e945254081960744577e4ed8e0170793e5e0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470291
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This is for management I/O and from the same idea as the last patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iae11de7848b38b9db1a699d80f595000a6ab2a47
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471696
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Previously, for iSCSI target, freeing bdev_io of SCSI task was deferred
until the reference count of the SCSI task becomes zero.
But this will cause the use-after-free issue when doing LUN hotplug during
large write I/O workload.
The scenario is the following:
- Large iSCSI write I/O is split into multiple I/Os, the first I/O is from immediate,
and subsetquent I/Os are from R2T.
1. The first I/O allocates iSCSI task as primary, and is submitted to the bdev layer.
The first I/O is pending in the bdev layer.
2. The second I/O allocates iSCSI task as secondary (secondary is associated with
primary by incrementing reference count).
3. Before submitting the second I/O to the bdev layer, LUN hotplug is started.
LUN hotplug waits for getting completion of the first write I/O from the bdev layer.
4. The bdev layer completes the first I/O. The primary iSCSI task is tried to free,
but reference count is still one, and is not done yet.
5. LUN hotplug detects completion of the first write I/O, and returns
LUN I/O channel to the bdev layer.
6. The second I/O is tried to submit to the bdev layer, but LUN is already removed,
and so free the secondary iSCSI task.
7. Then the reference count of the primary iSCSI task becomes zero,
and its bdev_io is freed. However, LUN I/O channel is already freed and freeing
bdev_io fails.
This issue is caused by separating iSCSI task allocation and submission.
For write I/O, we don't have to keep bdev_io after getting completion
of it from the bdev layer.
This applies to other non-read I/O types.
So for non-read I/O, free bdev_io after getting SCSI status in
bdev_scsi_task_complete_cmd(), and for read I/O, set bdev_io to
task as same as before.
The next patch will do the same for management task.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I530fb491514880ce41858e1bea55d422d606dfc4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471695
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Rename iscsi_op_snack() to iscsi_pdu_hdr_op_snack() because SNACK
Request PDU has only header and doesn't have PDU payload handling.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4d236c7963588729c32566e2be80db899edd2828
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471012
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Rename iscsi_op_logout() to iscsi_pdu_hdr_op_logout() because
Logout Request PDU has only header and doesn't have PDU payload
handling.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id788e5da56ee51b311cff2ec448c5cf0492ace13
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471009
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Rename iscsi_op_task() to iscsi_pdu_hdr_op_task() because Task
Management Request PDU has only header and doesn't have PDU
payload handling.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I66f842aecd2c1031a6bb0be4921e0f16930117aa
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471010
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
