Added info on new names of RPC.
Moved rest of the RPC section to the top to acompany it.
Change-Id: I3ee265ab2f163d0bf01b74ca87d4510835041c3a
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472990
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously iSCSI task was created after allocating data buffer
and reading all data, and hence creating iSCSI task and processing
iSCSI task were not separated.
However, the recent refactoring separate PDU header handling and
PDU payload handling, and then inserted allocating data buffer and
reading data segment in the middle.
If any critical error occurs during allocating data buffer or
reading data segment, PDU payload handling is not done, and hence
created iSCSI task is left in PDU receive process.
If any critical error occurs, the current connection starts exiting
and there is no way to continue PDU receive process.
The task left in PDU receive process is never freed, and hence
LUN hotplug or exiting connection never complete.
This patch do the following:
- Consolidate freeing pre-allocated PDU to spdk_iscsi_conn_destruct()
because this is the only path to exit connection.
- Abort SCSI task of the task left in PDU receive process if found
when freeing pre-allocated PDU. If the task is not SCSI or Data Out,
remove it simply.
Fix issues #1018.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472896 (master)
(cherry picked from commit cd654cc512)
Change-Id: I8a2464c446c43bf4cfb5afbc0cd78b5bdef7d080
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472988
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This reverts commit Iad6ecdc37493fa9f2d7ccab262a2c75dac2fcd48.
Both estimated cause and code change were wrong and didn't fix
the issue.
The next patch will fix the issue.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472895 (master)
(cherry picked from commit 832d90c1e2)
Change-Id: I00c8bb515ee39522c0e744dccfb839af15e946c4
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472987
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Users already have to poll the admin queue, so embed the io_msg
queue polling there to simplify the API.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472833 (master)
(cherry picked from commit 11739f3cb1)
Change-Id: I4d4d3be100be0798bee4096e0bbda96e20d2405e
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472963
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Disconnecting qpairs from the admin thread during a reset led to an
inevitable race with the data thread. QP related memory is freed during
the disconnect and cannot be touched from the other threads.
The only way to fix this is to force the qpair disconnect onto the
data thread.
This requires a small change in the way that resets are handled for
pcie. Please see the code in reset.c for that change.
fixes: bb01a089
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472749 (master)
(cherry picked from commit 13f30a254e)
Change-Id: I8a39e444c7cbbe85fafca42ffd040e929721ce95
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472960
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added couple missing entries after comparing changes in public
headers in SPDK.
While here, added backticks around functions
to improve readability in MD.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472732 (master)
(cherry picked from commit 808ad5f398)
Change-Id: I3c723a2e76dc02a84e8277e0bd8db96f10ba2222
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472856
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There were couple sections that were duplicated, so they
are now consolidated.
Moved around sections so that relevant ones are closer
to each other.
No change in content of section/entry was done in this patch.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472731 (master)
(cherry picked from commit cc25bd4aa9)
Change-Id: I1838d9057548c5f65f7304f783ee81e21d3b624c
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472855
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
_iscsi_conn_remove_lun() which is the callback to LUN hot-removal
returns immediately without closing the LUN if the connecion is
already in exiting, then expects that the LUN will be closed by
after the connection moves to the exited state.
LUN hot removal process doesn't check any R2T task if it is not
pending in SCSI layer but connection close process checks any R2T
task even if it is not pending in SCSI layer.
LUN hot removal will not complete until all LUN accesses are closed.
iscsi_conn_close_lun() checks if the LUN is already closed or not,
and so it will be no harm even if _iscsi_conn_remove_lun() calls
iscsi_conn_close_lun(). If the connection is in exited state,
all LUNs are already closed.
This patch changes _iscsi_conn_remove_lun() to return immediately
if the connection is in exited state.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472507 (master)
(cherry picked from commit 1ef8449feb)
Change-Id: Iad6ecdc37493fa9f2d7ccab262a2c75dac2fcd48
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472776
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Recent patches refactored iSCSI target to separate PDU header
and payload handling. However for SCSI Data-Out PDU, the division
of roles done by refactoring was wrong. Before refactoring, LUN
hotplug was checked after sending R2T, but after refactoring LUN
hotplug is checked before sending R2T. This change stopped PDU
exchange between iSCSI initiator and target and caused timeout of
LUN removal.
This patch restores the original ordering of checking LUN hotplug
and sending R2T by changing the division of roles.
SCSI Write Command PDU handling don't have any issue related with
this.
Fixes#1004
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472308 (master)
(cherry picked from commit 84f59335c2)
Change-Id: I7b2866d8394b522fb5420d2936de2fbddc7d1daa
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472775
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If we disconnect qpairs without taking the lock, we run the risk of
trying to double free qpair resources before they have been marked as
NULL.
For example, polling on one thread and calling
nvme_rdma_qpair_disconnect from one thread while doing an
nvme_ctrlr_reset on another thread. nvme_ctrlr_reset will call down to
nvme_rdma_qpair_disconnect on the same qpair and without any locking it
can result in trying to destroy the qpair resources multiple times.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472413 (master)
(cherry picked from commit a4925ba744)
Change-Id: I9eef6f2f92961ef8e3f8ece0e4a3d54f3434cff8
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472711
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds new script to verify CUSE functionality for NVMe
devices:
1) Starts spdk_tgt application
2) Attaches first found controller
3) Enables NVMe cuse devices for a controller and namespaces
4) Retrieves CUSE device names for controller and namespaces
4) Tests operations on exposed namespace devices
5) Tests operations on controller devices
NOTE: These tests requires at least one NVMe device with at least one
namespace available.
Change-Id: I5f5a7c86f8aefa73f12f4727f7520f16a599985b
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468828
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Modifying the target_disconnect.sh test to include an example of
transport_id failover for an NVMe-oF controller.
Change-Id: I746ed737ab56c7dec6ee99e840c631ba46ee359e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472230
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Dependencies required to compile and run nvme-cli tests:
1) fuse module must be installed,
2) cuse module must be installed,
a. Fedora requires to install "kernel-modules-extra" providing
cuse module for a kernel,
3) systemd-devel package to compile nvme-cli application
While namespace devices are provided as character devices via cuse
module, this patch also installs nvme-cli version accepting namespaces
as character devices.
Required changes are available for review here:
https://review.gerrithub.io/c/spdk/nvme-cli/+/472250
After merging the changes will be available on spdk/nvme-cli
repository at 'nvme-cuse' branch.
NOTE: changes above are not required when controller with nsid is
provided as an nvme-cli option,
e.g.
"nvme id-ns /dev/spdk/nvme0 -n 1"
instead of:
"nvme id-ns /dev/spdk/nvme0n1"
Change-Id: I413c33d9891c5a39a5388ea7407d798c138b0584
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472024
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added RPC commands to register/unregister CUSE devices
to NVMe controllers:
- bdev_nvme_cuse_register
- bdev_nvme_cuse_unregister
Additionally two RPC now return CUSE device names:
- bdev_get_bdevs for namespaces
- bdev_nvme_get_controllers for controllers
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I69c4bf41ec8f78a7522894268a67dd733881712f
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472211
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added spdk_nvme_io_msg_process() in bdev_nvme_poll_adminq()
to process io messages that were passed from non-polled mode
threads to the controller.
This is used as part of nvme cuse support for surfacing
/dev nodes that can be used by standard Linux management
applications like nvme-cli.
Change-Id: If9e2e0b472c332aee54e3c6674bdd5fe616ab07c
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469692
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
IO request handling implementation for CUSE namespaces:
- NVME_IOCTL_SUBMIT_IO,
a. SPDK_NVME_OPC_READ,
b. SPDK_NVME_OPC_WRITE,
Other ioctls related to the namespace:
- NVME_IOCTL_ID,
- BLKPBSZGET,
- BLKGETSIZE,
- BLKGETSIZE64,
Additionally NVME_IOCTL_ADMIN_CMD has been implemented
for namespace to send admin cmd to its controller.
Change-Id: Iaa2a5ee409b35c682ae8b2bd2309e8b67eb51981
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469691
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
NVMe character device implementation. This patch adds implementation
of IO producer using CUSE library. It allows to create nvme device
nodes in linux kernel for controller as well as for namespace and
process ioctl requests as usual from linux environment.
Both devices (controller and namespaces) are exposed as character
devices.
To compile NVMe CUSE module use "./configure --with-nvme-cuse".
Names for created CUSE devices can be retrieved using
spdk_nvme_cuse_get_ctrlr_name() and spdk_nvme_cuse_get_ns_name().
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I0fc9a9a1ef3c9c2b3112d07c2b4b1f8d49665ee1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466917
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch allows to send IO requests from external module to the nvme
device.
External module should call nvme_io_msg_ctrlr_start() to start IO message
producer on the controller and enable sending messages.
nvme_io_msg_send() is used to send IO to NVMe driver thread context,
where passed function will be called. Allowing the external module to
issue IO as needed.
NVMe driver users should poll spdk_nvme_io_msg_process() to move forward,
sending IO from external module and process their completions.
Change-Id: Ie59abac69870c4e4daa50120c747f3b620395921
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471386
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This change allows setting of the NVMe completion queue
CDW0 in spdk_bdev_io_complete_nvme_status.
Before that change, handling of vendor specific NVMe IO
commands was limited since there wasn't a way to return
command specific info back to the initiator.
Change-Id: I250d5df3bd1e62ddb89a011503d42bd4c8390f9b
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470678
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since we use big buffer to read the data, so the incoming
data may already be read when the req is waiting for the buffer.
So if we use the orginalstatement machine, there will be no
read event will be generated again.
The quick solution is to restore the original code, since
for req which has incapsule data, we not need to wait for the
buffer from the shared buffer pool.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ib195d57cc2969235203c34664115c3322d1c9eae
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472047
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Remove from shellcheck excluded SC2165: This nested loop
overrides the index variable of its parent.
This warning is not actually present in any of spdk/spdk scripts.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Idbef5f5e11467e389c7b965bb394a71d2d0d2566
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472174
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Correct shellcheck rule SC2166: Prefer [ p ] && [ q ]
as [ p -a q ] is not well defined.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I3fb2fb0e790bbdd296b64673c301324632d7c37b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472173
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Remove from shellcheck excluded SC2167: This parent
loop has its index variable overridden.
This warning is not actually present in any of spdk/spdk scripts.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I066f7fa856581377ee8370ebe9167841a18b0787
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472172
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Remove from shellcheck excluded SC2230: which is non-standard.
Use builtin 'command -v' instead.
This warning is not actually present in any of spdk/spdk scripts.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I1e535b44ea54999736206aeb3906ce3cf670bc21
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472171
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Correct shellcheck rule SC2115: Use "${var:?}" to
ensure this never expands to /* .
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I4a6beef338b7a3c496f1b74a0cdbbdff83403ddc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471464
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Correct shellcheck rule SC2103: Use a ( subshell ) to avoid having to cd back.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I474e11f5753c3482c7924548ab7c0183d4ac419d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471437
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This can be useful when trying to perform multipath failover at the
application level. However, the controller must be in the failed state
before calling this function.
Change-Id: I5403c0036fed5dd3600ee20592925297494ba8aa
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470699
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These will be useful helper functions for the trid modification code
that gets introduced later.
Change-Id: Ief73e3045710bf35c511794c19b4dfefb93018f1
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471780
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is simply a dumbed down version of perf so that we don't add extra
functionality to perf that might impact its performance.
Change-Id: Ia2716a61abcc5269dafcda394d40517d156fdb2a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471661
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
While it is unlikely that a single qpair will be failed, it is important
to make it possible to reconnect a single qpair.
This function is also handy at the application layer when going through
a reconnect workflow. If we get -ENXIO from a qpair when we poll, we
will turn around and call this function. If we get -ENXIO from this
function, then we know the whole controller is failed and we need to do
a reset.
Change-Id: I6a8ea0ce27fce2f5fc0a5b3db05834acd68e6a39
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471417
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Ideally we'd have a way to query if DPDK is already
initialized but we don't have that yet. We want that
for the case where we have an SPDK application that's part
of a framework that may (or may not) have already initialized
DPDK. If it's already been initialized, let's print an
error message that isn't quite as inflammatory.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifc095245dcdef24cdeeaab2dbe791ca4e840870e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471422
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The header file already says it returns negative errnos,
but the env_dpdk implementation was just returning -1
on failure.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie2236f83094672548327dba945b33e3f28fee338
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471421
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch follows with
https://review.gerrithub.io/c/spdk/spdk/+/471947.
Some commands report errors about transferred meaning.
This is relatedi to issue #986
Signed-off-by: dongx.yi <dongx.yi@intel.com>
Change-Id: I396a47853823bb66554fbae7e1f96e4236826850
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472134
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
/etc/ceph/ceph.client.admin.keyring is used by
the liborados client, if keyring is udpated, we should
update this file.
If we see:
librados: client.admin authentication error (1) Operation not permitted
Usually, we should set the read privilge for the file.
Change-Id: I34967844a5d0578f740e601def4b0cbd297a95dc
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471947
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
