We should use `ns->registrants` to count the number of registered
controllers(REGCTL) for Reservation Report command, as `subsystem->ctrlrs`
only list current active sessions(controllers).
Also use the output data buffer directly so that we don't need to calloc/free
during the process of Reservation Report command.
Fix#1928
Change-Id: I650224b751a08416208b8a504b82debff31e92fd
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7822
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: wanghailiang <hailiangx.e.wang@intel.com>
This is the same effort as spdk_poller.
The following patches will move the definition of struct spdk_thread and
enum spdk_thread_state from include/spdk_internal/thread.h to
lib/thread/thread.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7f7bdfdd7a7b1b834d16d79638a4fd2d63e9daf6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7800
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Most accesses to the struct spdk_poller outside lib/thread have been
done via functions but a few direct accesses remain.
Change these to indirect accesses by addinng a few helper functions
as SPDK internal APIs.
Add spdk_poller_get_name() to get the name of the poller.
Remove spdk_poller_state_str() and add spdk_poller_get_state_str().
Exposing enum spdk_poller_state outside lib/thread is not really
necessary.
This removal requires us to update major SO version.
Add spdk_poller_get_period_ticks() to get the period ticks of the
poller.
Add struct spdk_poller_stats and spdk_poller_get_stats() to get
the stats of the poller.
The next patch will move the definition of struct spdk_poller and
enum spdk_poller_state from include/spdk_internal/thread.h to
lib/thread/thread.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id597dae074a15fcd8af09fd9d416a22ce2f403c3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7798
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
It is better if the internal of poller or thread is not accessed
outside lib/thread.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I80d488a111fd9a67a0da32d1e63695ce5a6bcb4c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7776
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The following patches will update the cache to the closest timed
poller when removing it from the list. To do it easier, factor out
the operation to remove a timed poller from timed_pollers list into
a helper function.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I25016d86117b240a2651d1f06e23bea0342211f1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7719
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When we introduce red black tree for timed pollers, we will not use
RB_FOREACH_SAFE() but cache the leftmost (smallest) node and iterate
from it via RB_NEXT() instead.
As another preparation, separate TAILQ_FOREACH_SAFE() into TAILQ_FIRST()
and TAILQ_NEXT().
The next patch will cache the first element to thread and refer it
first.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie03c387b5b3a055c668e7b439a5eb05ed77eaa81
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7718
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It will be sufficiently reasonable to check if the caller thread is valid
even if spdk_poller_pause() or spdk_poller_resume() does nothing.
Besides, let's write all possibles states explicitly in switch - cases.
This refactoring clarifies the logic and makes the following patches easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1163eff388fe741d6b6924f474a82b1aa7d18acb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7665
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change if - else if - else blocks of thread_execute_poller() and
thread_execute_timed_poller() to switch - cases blocks and specify
possible states explicitly in these switch - cases blocks.
The code will be simpler and clarified, and then the following patches
will be easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2e283894f5d69e1bd67466ae070c5b8bb9014616
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7664
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
There will be no issue even if time poller is unregistered or paused
after it is expired. The iteration is stopped anyway after the head poller
is found not to be expired.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2b394b8b517930a6630dd31f59fcaea12eb80572
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7662
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The following patches will introduce red black tree to manage
timed pollers efficiently but it will be based on macros available only
in lib/thread/thread.c. Hence then it will be difficult to expose the
internal of timed pollers tree outside the file. On the other hand,
we do not want to include JSON into the file.
Hence add a few SPDK internal APIs to iterate pollers list transparently.
For spdk_thread_get_next_active/timed/pause_poller(), we omit the parameter
thread and get it internally from poller->thread even if the names include
the term "thread". This will be slightly cleaner.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I000801a2e4dc42fa79801a2fd6f2b06e1b769c88
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7717
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add {min,max}_cntlid to spdk_nvmf_subsystem, defaulting to 1 and
0xFFEF, respectively, and add nvmf_subsystem_set_cntlid_range() to
allow the controller range to be configured in the range [min_cntlid,
max_cntlid].
Also add {min,max}_cntlid to the nvmf_create_subsystem RPC to allow
the controller ID range to be specified when creating an nvmf
subsystem.
Signed-off-by: Jonathan Teh <jonathan.teh@mayadata.io>
Change-Id: I936db3bb0c9a38569063a6fd3c11df262dfad776
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7322
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This update will stop using `struct vfio_device_info` from
<linux/vfio.h>.
Fix issue #1922.
Change-Id: Ia7ad745db8d7ed8f5248ca13e3188ebd540b0e40
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7831
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This helps in next patch in series where multiple
completions will be executing.
UT is adjusted since one additional poll is required.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id72377ddef91e40cdbc2bdea6f33c23309b0ca3d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7642
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
During snapshot creation the original blob becomes
a thin provisioned blob that will only the diff of data after
snapshot creation.
Despite the comment in the UT the number of polls before issuing
blob write was hitting blob BEFORE it swapped with new one.
Issuing I/O during this period shall check for io freeze
before checking cluster allocation.
Otherwise bs_io_unit_is_allocated() hits assert for thin
provisioned blob. This is because cluster map of blob is
empty, but properties have not been updated yet.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I742e1a50b14d456ae1e6de13b5111caec3e8322c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7641
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also for the purpose to avoid a burst of children unmap request,
we will submit at most up to 8 children request at a time for
a big UNMAP command.
Change-Id: Iaf0f18b07517e0a8f84dc04e8c93b95691a1a43c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7518
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Both UNMAP and R/W will share the some logic to process the submission,
so combine them to a helper function first.
Change-Id: Ia4f234c6a58f078d3e9f88cacaf1510a17f07acc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7606
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Addressing review comment from 6cebe9d0.
Minor optimisation to cache result of spdk_u32log2() into local variable
instead of calling it multiple times.
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: I2fd6afd1e3ee461662de3f9d278958664224e106
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7806
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: sunshihao <sunshihao@huawei.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
ctrlr_discovery.c doesn't need this #include.
Including it causes bdev_module.h types to be
emitted to the debug symbols at least with some
compilers, which can result in unwanted abidiff
errors.
The unit tests do need it, so just include it
there instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iad28f9778ce08b11b52325658583ae9032295f3a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7813
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The library itself doesn't need it. The unit tests
do need it, so just include it there.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9aefd303ae12928d45141029436509f185105bd3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7812
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Normally, unless RTE_MALLOC_DEBUG is set, DPDK zeroes memory in rte_free().
If RTE_MALLOC_DEBUG rte_free() fills memory with poison pattern, but then
(and only then) the memory is zeroed in rte_zmalloc_socket(). Relying on
this behavior allows to avoid unnecessary memset() in spdk_zmalloc() path.
Signed-off-by: Robert Baldyga <robert.baldyga@intel.com>
Change-Id: If3efa4dd22f1568949c3fb529b604bd597ceb32f
Signed-off-by: Rafal Stefanowski <rafal.stefanowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6975
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We did not find this issue, because we always use seed = 0 to test.
Definitely, we need to assign the seed value.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I6bec1b6d61480cdd7c9e27578dcaf5de2f65cf44
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7716
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch fixes missing free of qpair_mask when a listener error
occurs in ctrlr_create.
Signed-off-by: Jonas Pfefferle <pepperjo@japf.ch>
Change-Id: I09162b86d8ac73bf9fc2006a08dcc0a955f222b3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7818
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Not just one with extra available info. Also remove the extra
read of the error register, not required.
fixes: #1927
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I28badb45d8cc8d16b72f7019bd2a2044998fc402
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7729
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Nvme-cli uses NVME_IOCTL_IO_CMDs for "io-passthru"
commands to cuse devices. This patch adds support
for that IOCTL.
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: I20e0ac91ba08fce91bc5da1f4a1e454058cdd1e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7741
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The nvme cuse IOCTLs are actually creating passthru commands
that can be either IO passthru commands or admin commands.
Renaming the routines to correctly reflect that should limit
the confusion when reading the code. Passthru commands that
are admin commands will go to the spdk_nvme_ctrlr_cmd_admin_raw
interface and passthru commands that are IO will be sent to the
spdk_nvme_ctrlr_cmd_io_raw interface.
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: I8d427fe8b5f503fdb2d193236c77d410d5b13886
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7740
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Nvme-cli uses BLKSSZGET so support needs to be added for
nvme cuse devices.
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: Ic8316713b2d017c8ff32a225efff6bcb95842799
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7708
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It is useful to have debug log information in the nvme_cuse
path when debugging IOCTls and flows.
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: Ifef1bb82c96438e2fcbb9ad2fafe3f3eb66bed51
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7707
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The purpose is to prepared for implement the async crc32 caculation
in the future patch.
Change-Id: Ia75f28154c49f08b527d48c63b9da79a6bdfede8
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7794
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The purpose is to prepared for implement the async crc32 caculation
in the future patch.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I49f84ea1966f0acdd6f5aeb7192896f91fd16dee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7793
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Purpose: We will also support the kernel idxd driver, so we do not
need export this feature in the module file.
Change-Id: I965e031497920f527962ba187bccd81de6977b8f
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7336
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6ad71a65244526e99a36920c630096cc9739d94d
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7809
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is prepared for using the hardware offloading
engine in accel framework. And some fields in nvme_tcp_pdu
needs to be DMA addressable.
Change-Id: I75325e2cd7ff25fe938bea0ac9489a5027e3e0e9
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7770
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This is used to prepare using the accel framework to calculate
the crc32 because some fields in this structure needs to be allocated
in DMA addressable memory.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ib8def5596e60f4702709da647145c4e2b6d6848f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7767
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Note: a lot of the TCP and FC trace registers were
specifying '1' which means the arg type is a pointer,
but in reality it is always passing 0 for arg1. So
this patch just changes them to SPDK_TRACE_ARG_TYPE_INT.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I18d3cedd21e516f16cb2cd0a7f8c16670b1895d7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7763
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
We already pass the PDU as arg1, so by changing the
trace register descriptions, we can map the PDUs to
more readable IDs when running the spdk_trace app.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iad7106eeb0f5fe738f81da5ee174515d1cf4b6ce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7757
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This was accidentally moved to the wrong place as
part of some earlier iSCSI refactoring. This trace
record should be executed when we have finished
reading all of the data for any PDU, not just those
with immediate data.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib1d17e5e79ff220e9e9b3dd55e247e745bd58019
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7756
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
It can be useful for testing or development purposes to force clients to write
to doorbells using vfio-user messages instead of directly into shared memory;
add a transport-specific option to disable the shared mapping.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I7ed062fbe211ba27c85d00b12d81a0f84a8322ed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7554
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This will help us to add unmap split function, also
remove bdev_io_type_can_split() because we changed
to use swith(io_type) ... case now.
Change-Id: I449d6a9f5bf2d0b43dd124bbfc9e1ca2afddc15a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7516
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Only the last bdev_io can be freed without this fix.
Change-Id: I0d05b5d89e38ef60872ebc0f23aaed0c622593c4
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7571
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Purpose: This patch is used to prepare to add the kernel
idxd support later.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: If89665f95d622c7342ab75050664158ec6fc615a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7330
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
(Note: this patch was previously applied as b32cfc46 and then reverted
as 63642bef.)
Today the in-guest nvme device shows physical_block_size=512 even though
the backend iSCSI bdev supports physical_block_size=4K
iSCSI targets exposes physical block size using
logical_block_per_physical_block_exponent in READ_CAPACITY_16
NPWG is one of the way to let Linux nvme driver set
physical_block_size of the nvme block device.
This patch adds spdk_bdev.phys_blocklen which is updated if the iSCSI
backend exposes physical_block_size.
Later phys_blocklen is used in nvmf to set NPWG and NAWUPF to report
back during NS identity.
Linux driver uses min(nawupf, npwg) to set physical_block_size.
Similarly in scsi_bdev fill lbppbe in READ_CAP16 response
based on spdk_bdev.phys_blocklen.
Fixes#1884
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: I0b6c81f1937e346d448f49c927eda8c79d2d75c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7739
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
1) use spdk_bdev_get_name() accessor
2) use __SPDK_BDEV_MODULE_ONLY #define
The latter allows nvmf to just get the spdk_bdev_module
definitions and APIs that it needs for claiming bdevs
for purposes of avoiding the same namespace used in
different subsystems.
This also ensures that future changes to structures
like spdk_bdev and spdk_bdev_io will not cause
lib/nvmf so version changes.
Note: we include bdev_module.h explicitly in the
nvmf/subsystem unit tests now, before including
subsystem.c, because the unit tests do depend on
knowing the internal structure of spdk_bdev.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2f499a741d19f4749eadb402641f28137245fd23
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7738
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
libvfio-user DMA APIs report all regions notified by the client, including those
that don't have a corresponding shared mapping. There are several of these for
a typical VM, so just ignore this case.
Signed-off-by: John Levon <john.levon@nutanix.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: I37b06f4bc6d1818a03c8742616ed142f575d3f0e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7532
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When payload_size is 0, we may get wrong cdw10 because of the calculate: 0 - 1,
add value check to fix value inversion bug.
Signed-off-by: sunshihao <sunshihao@huawei.com>
Change-Id: I3bcd38ba981c854ff917282341d32aac47d22b76
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7443
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This allows us to remove separate fcntl() calls to
set O_NONBLOCK.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1a590cfb3b65b3174bb5ef33e060cdc9bb7ac86c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7598
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
This simplifies the code a bit, removing the need
for the separate fcntl() calls.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4fef8f01a055d1471df87bd979c21d6198e9868a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7596
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It is already set by nvmf_tcp_req_pdu_init
when we get the pdu. So we do not set it again.
Change-Id: I034bbc46e600afd802457c0b152e303f16bafba3
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7714
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This reverts commit b32cfc467b.
This commit fails the ABI checks and only got through because the checks
were disabled until 21.04 hit.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Id26b8f8ba551193d99b1ccbd31b35378b4095a20
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7731
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Today the in-guest nvme device shows physical_block_size=512 even though
the backend iSCSI bdev supports physical_block_size=4K
iSCSI targets exposes physical block size using
logical_block_per_physical_block_exponent in READ_CAPACITY_16
NPWG is one of the way to let Linux nvme driver set
physical_block_size of the nvme block device.
This patch adds spdk_bdev.phys_blocklen which is updated if the iSCSI
backend exposes physical_block_size.
Later phys_blocklen is used in nvmf to set NPWG and NAWUPF to report
back during NS identity.
Linux driver uses min(nawupf, npwg) to set physical_block_size.
Similarly in scsi_bdev fill lbppbe in READ_CAP16 response
based on spdk_bdev.phys_blocklen.
Fixes#1884
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: I0b6c81f1937e346d448f49c927eda8c79d2d75cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7310
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We have seen that dptr was not alligned to 4k using cuse. Added allignment of data in cuse ctx to 4k same as it is done in nvme_allocate_request_user_copy
Signed-off-by: jwyka <jakub.wyka@intel.com>
Change-Id: Ic5c2482eae20d64ba467016eb61f5255467f70a9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7453
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI
When performing snapshot creation the I/O is frozen
during the process. The blob persists for extent page
allocation is delayed until snapshot creation is finished.
This results in multiple blob persists executing one after
the other, with only intent of writing out updated extent table
pointing to new extent pages.
Since blob->state is marked DIRTY before issuing each persist,
but a single persist completion marks state CLEAR.
Blob serialize correctly expects each persist to contain
dirtied metadata, in order to avoid unnecessary md writes.
Since all other instances of marking blob DIRTY is explicit,
assert in blob serialize is left as is.
Instead when running the queued up blob persists, the blob
state is marked DIRTY.
Side effect is that it will write out same md in some cases.
Fixes#1909
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I39f37299f3f0ebfccbdd4063781b5ecce286e993
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7640
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_vtophys() takes a mapping_length parameter, so
it can return the length for which the returned
virtual address is valid.
But spdk_vtophys() will only return the max
between the valid length and the input mapping_length
parameter.
So the nvme SGL building code for contiguous buffers
was broken, since it would only set the mapping_length
once, before the loop started. Worst case, if a buffer
started just before (maybe 256 bytes) before a huge page
boundary, each time through the loop we would create
a new SGL for only 256 bytes at a time, very quickly
running out of SGL entries for a large buffer.
Fixes#1852.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib1000d8b130e8e4bfeacccd6e60f8109428dfc1e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7659
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The IDENTIFY_CNS quirk was applied as part of QEMU
OCSSD handling in commit 6442451b. But it was applied
not only to the OCSSD dev ID, but also the dev ID
for non-OCSSD NVMe controllers.
Starting with QEMU 5.2, QEMU will allocate a default
256 namespaces, but only some are active (associated
with the backing disks specified by the user). QEMU
supports IDENTIFY_CNS, but since this quirk was set,
we wouldn't send a real IDENTIFY_CNS and instead
would just populate a fake list where all namespaces
were considered active. This causes breakage in
a few places - mainly where we iterate through
the active namespaces, and then are surprised that
calling spdk_nvme_ns_is_active() returns false.
It was also breaking bdev_nvme_attach_controller RPC,
since by default we can only support returning 128
names, but since all of the namespaces were deemed
active, it was trying to return 256.
Fixes#1916.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4fdd27e0e36f0ac07a95f9f29aa83357e8505a45
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7658
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When zcero copy send is enabled and used by initiator,
it could significantly increase latency in some payloads.
To enable more fine graing configuration of zero copy
send feature, add new parameters enable_zerocopy_send_server
and enable_zerocopy_send_client to spdk_sock_impl_opts to
enable/disable zcopy for specific type of sockets.
Exisiting enable_zerocopy_send parameter affects all types
of sockets.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I111c75608f8826980a56e210c076ab8ff16ddbdc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7457
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There are three modules implementing the bdev-zone API:
bdev_nvme, bdev_ocssd, and vbdev_zone_block.
For all three modules, the number of zones can be calculated using:
block_count / zone_size.
To avoid this calculation being performed everywhere, create a helper
function in bdev_zone.h, together with the other zone APIs, such that
a user can easily get the number of zones.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I2967b15a604ab8bf4420588e7510b9820762f925
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7451
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
tcp transport doesn't send a response capsule when
c2h_success is set even if cdw0 or cdw1 are non-0.
Signed-off-by: Ed rodriguez <edwinr@netapp.com>
Signed-off-by: John Meneghini johnm@netapp.com
Change-Id: Ieba81fcc50342a2009f7931526e6f8392e26b6a5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6808
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When do spdk_reactor_set_interrupt_mode, if reactor
already runs in the specific mode, directly call
callback function before return 0;
Change-Id: I1fd8b753e9881755aa128aabe6d1e2749e58b39b
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7549
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The net library isn't needed - everything these RPCs
do can be done externally to the SPDK application.
This library will be removed in the 21.07 release.
As part of the deprecation, mark the net RPCs as
private. This will prevent an upcoming patch from
complaining that these RPCs are not documented.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I61118820fd29e410dca763595c3d9fd01a57373d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7592
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
For pollers that don't natively support interrupts, using
a busy wait mechanism temporarily.
An interrupt falicity for busy wait will
be registered for non-periodic poller.
Internally, an eventfd is created to each busy wait
poller. Write the eventfd when set interrupt mode,
and only read the eventfd when set back to poll mode,
then the busy wait poller will be called repeatly
in interrupt mode.
Change-Id: Iaeae14d1ff69fd9ef7d606a0b0a70193764513e9
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6711
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
In next patch, if poller doesn't have a period, eventfd
will be created which's always busy automatically.
This eventfd can be combined with timerfd. So rename
timerfd to interruptfd.
Change-Id: Ibffa30ecfcaa73e55f47e97fac854641b74f2dfb
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7546
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Defined callback for spdk_poller to adapt itself to
set interrupt or poll mode. The callback can
be registered to spdk_poller by new function
`spdk_poller_register_interrupt`
Interrupt callback operations for period poller are implemented,
so period pollers now are interruptable.
Change-Id: I2aa6ebfdd75f76b85a70af7e42530be4131ddc8a
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5752
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
These refined functions are prepared to adapt period
poller to following poller switchable API.
Change-Id: I34d2a785fa0e757b97b0dac5ccf24819d75e0184
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7156
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
The interrupt mode of spdk_thread can be operated
by reactor based on reactor's interrupt mode when
the spdk_thread is scheduled or the reactor is set
into interrupt mode.
Change-Id: Ibeef7ffb759589a7b372bd78e59e3410be061383
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6709
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_thread_set_interrupt_mode can get spdk_thread run
between intr and poll mode. It is only valid when thread
interrupt facility is enabled by
spdk_interrupt_mode_enable(). Currently, this function
is limited that no poller is registered to the spdk_thread.
Change-Id: Iba54accd5976beb6f6e155014903928ce2858e36
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6708
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
All the other RPCs use underscores in the names of their fields, so
`framework_get_scheduler` should also use them instead of the spaces.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I0e9edd7c59a4ab61643a7b558a2359e1805ed0b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7557
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
DPDK recently clarified some semantics on the rte_devargs 'data'
and 'args' fields. This actually breaks our use of the 'data'
field to store the 2 second timeout timestamp for delaying
attach to newly inserted devices. Investigating this further,
it does not seem our use of the 'data' field was valid - it just
happened to work until now.
We could use the 'args' field now. But knowing whether to use
'args' or 'data' would then be dependent on the DPDK version.
We cannot use RTE_VERSION_NUM to decide, because this is a
compile time decision, and it is possible in shared library
use cases that we could actually link and execute against a
different version of DPDK than we built against.
So instead we will create our own env_devargs structure that
will store these allowed_at timestamps. Currently it's just
a linked list (which is exactly how DPDK does it) - we could
make it more optimal with a hash table down the road, but this
code only executes when we are doing PCI enumeration so it is
not performance critical.
Fixes#1904.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3ee5d65ba90635b5a96b97dd0f4ab72a093fe8f7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7506
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Before this patch blob persist wrote out all allocated extent pages.
Intended design was to write out extent pages in two cases:
1) Thin provisioned blobs to write out extent pages when necessary
during cluster allocation.
2) Thick provisioned blobs to write extent pages during blob persist
when the blob was resized
This patch implements 1) by inserting extent before issuing blob persist
in cluster allocation path.
See blob_persist_extent_page_cpl() and blob_insert_new_ep_cb().
Blob persist might have to rewrite the last extent page after blob resize.
See blob_persist_start().
Meanwhile 2) was incorrecly implemented since it always re-wrote all
extent pages starting from 0. This was addressed by limiting number
of extent pages written, only to ones that were resized.
Some considerations were needed:
a) blob resize happen on cluster granularity, it might be needed to re-write
last extent page if resize was not large enough to change number of extent pages
b) first extent page to write should be based on the num_extent_pages from
active or clean, depending on resize direction
See blob_persist_start().
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ibba9e3de3aadb64c1844a462eb0246e4ef65d37f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7202
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
When both clone and snapshot had already extent pages
corresponding to the same region in cluster map,
the clone extent page was replaced with one from snapshot.
This was incorrect and would result in loss of clusters
from clones extent page. It did not occur in practice
because all extent pages were rewritten anyway during
md sync. Cluster map was correct so updated extent pages
were too.
Cluster map correctness is verified in UT _blob_inflate_rw(true),
at the very end when checking data consistency of inflated blob.
This patch writes out the updated extent page explicitly.
So it would be possible to skip wirting out extent pages
during md sync later in the series.
Note 1)
At this point in series the extent page is written here,
and in blob persists. The later will be removed later in
series.
Note 2)
Errors during updating extent pages are not accounted for,
but neither does syncing them in blob persist.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I7deac3c64299f33f8df49e860af1a16295c074e6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7438
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
The blob_insert_extent() name was confusing, since the function
was actually responsible for writting out the extent page to disk.
Changed to a more fitting name.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia312b0ef152100f30d5a1bfe123e55135c8afa6e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7561
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
This patch does not change functionality. It separates
three stages of updating clone during snapshot deletion:
- updating cluster map
- updating extent pages
- removing backing device from clone
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I44869f3be596d9d0f06db4acedfdd7e1500516ff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7437
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Modifies RPC "framework_get_reactors" to get core frequency for current
core and insert it into JSON response.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: Ibb9c25e6e1d28ddb4cde42baa20a7e9808652ae8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6582
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Currently _get_core_curr_freqs returns an index from the array
of available frequencies for given core. This change aims to
make this function execute what its name suggests.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I1143f692e7bbbf2f8f9e1cd4943f8e3ecd70ddea
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7452
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function finds a placement_id that does not have a group
associated with it.
Change-Id: I1306690e980fd4661f46dba9fb283f048a962eba
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7223
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also use debug log when the memory region isn't 2MiB aligned,
The QEMU may only use one page for a memory region, we are sure
these memory regions will not be used as NVMe data buffers.
Previously libvfio-user will help us to round up these memory
regions to 2MiB alignment, and it doesn't do it anymore, this
isn't an error case so change it to debug log.
Change-Id: I6c397f50407d4f2a14f78d9f99fffc2e4054ff51
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7545
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The io_msg qpair is allocated and managed by the
primary process, so don't try polling it from
secondary processes.
This fixes a bug where an SPDK target has configured
cuse, and we try to run fio (for example) as a
secondary process.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I48e2b89597196ce2ba1fc02ea3a7c76c5a33281a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7482
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The P55XX serial SSDs can support dlfeat.read_value in the identify
namespace data structure, we don't need to add this quirk for it,
just remove it.
Change-Id: I165d89085e246a570e80dbaf05f41dc331b93f0c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7526
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When the format command is issued, the kioxia drives responds with "NS Attr change" notices.
In the callback function of the notice, the CQ Head Doorbell is updated twice with the same
value while issuing the Active NS list & identify NS commands.
Fixes: #1701
Signed-off-by: G.Balaji <gbalajieie@gmail.com>
Change-Id: I8cc80fba0a226c22753e605ef3129602a9313ce7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7149
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
private tag added to the experimental or internal rpcs
which might be removed in future or not documented.
Signed-off-by: Monica Kenguva <monica.kenguva@intel.com>
Change-Id: I3e967252412f2491860eea5fa69750a7562b994a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7510
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Also update the UT.
Change-Id: I6086bf4cafca8a917a467490955d7df0ba8930d5
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7495
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously we can only remap NVMe command using PRP, now we add
the SGL support.
Change-Id: Iec352d858a07bdd3d5f261336d6fa1167ba7aa79
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7279
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The API `spdk_nvme_map_prps` is used in nvmf/vfio-user to
remap VM's NVMe command data buffer to local virtual address,
and for command using PRP, there maybe multiple pages, when
parsing the PRP list to local IOVs, we need a parameter to check
that the maximum number of vectors can't exceed the IOVs, this API
can't meet the requirement, while here, we add a new API `spdk_nvme_map_cmd`
and with a new parameter `max_iovcnt` to fix this case, and it can
also cover the command using SGL in the coming patches.
Change-Id: I71063524bed16ee3434103867a556d3741e55326
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7278
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change spdk_nvme_map_prps to a internal fucntion with
a new parameter `max_iovcnt` to protect the IOVs. Also
for the purpose to keep API compatibility, we still leave
the API here.
Change-Id: I9a638beb87aab20bba5f8a4fa0a9396110d56aff
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7335
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is required by libvfio-user APIs.
Change-Id: I675a3be0a9650d146c8d37e42debf1191656903b
Signed-off-by: John Levon <john.levon@nutanix.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7472
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is used to fix the chained crc32c computing when users pass
a vector. Since we use a union in spdk_accel_task structure to differentiate
the usage on "src" and "the vector info" (iovs and iovcnt). So we cannot
directly write the src field while users pass a vector.
And I verified it in the hardware platform.
Change-Id: I85d6e86fa689b261782f80a2f89d908a5d4db84f
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7471
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There are cases that the valid vfio container doesn't contain
any IOMMU group, so for this case we should not return error.
Fix issue #1855.
Change-Id: I2057dc9a519a31ec16452b1e9d1c470eccfc4992
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7470
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I068e74f5b7d078ad37572eff47e772ad6967b827
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7436
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Unlike tcp/rdma transport, the vfio-user transport doesn't need to
wait for the data buffers, so here we add two request states for
now.
The request state will help us for coming request abort API.
Change-Id: Ibbb193fbbd358333f81aa29341493c19ab7bd108
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7435
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously we reset them when getting a new request, but it's more
reasonable in the completion path.
Change-Id: I3dab35ce471d2a5bbd37576540d30a09dcf93410
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7434
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also rename transport request and controller variables
with "vu_" prefix.
The consolidated function will be used in coming patch.
Change-Id: I5219c13d7089dfdaea4a54e0b15cc5e6ecf2eb16
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7433
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since the maps are unique to modules, they can store the group_impls
directly.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I7f11db558e38e940267fdf6eaacbe515334391c2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7222
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This allows for different policies per module, as well as overlapped
placement_id values.
Change-Id: I0a9c83e68d22733d81f005eb054a4c5f236f88d9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7221
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If the qpair is part of a poll group, the socket will get
flushed as part of polling that group already. We only need
to explicitly flush to handle the case where the qpair is
not in a poll group.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ib2a510b6d26d1622950437d81e0a40f6b15d6b54
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7049
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
There was a fix for this that went into the posix layer, but the
underlying problem is the logic in the nvme/tcp transport. Attempt to
fix that instead.
Change-Id: I04dd850bb201641d441c8c1f88c7bb8ba1d09e58
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6751
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Logs are all changed to DEBUGLOG. If you compiles non-debug mode.
Gcc reports error. Using #ifdef DEBUG to exclude them.
Fixes#1903
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Idcaf083e430a77845fbd8443acade4b3f0e1efc9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7445
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Even if the operation is deferred, null it out if it reported success.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I3cc9eaa88bdd7a2e7d13790782f4a9b0966e5585
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6892
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Some iSCSI initiators send a Data-OUT PDU sequence whose PDUs do
not have block size multiples data.
SPDK iSCSI target had replied SCSI write error to such initiators
because previously we had sent a write subtask per Data-OUT PDU.
SPDK SCSI library had rejected the write subtask because its data
was not block size multiples.
This patch fixes the issue.
The idea is to aggregate multiple Data-OUT PDUs into a single write
subtask up to 64KB or until F bit is set. MaxRecvDataSegmentLength
is 64KB but MaxBurstLength is 1MB. Hence one Data-OUT PDU data may
be split into multiple data buffers, but the maximum number of split
is two.
When processing the data segment of the Data-OUT PDU, save the data
buffer of the current PDU to the current task if the data buffer is
not full and F bit is not set. In this case, write subtask is not
submitted.
When processing the header of the Data-OUT PDU, if the current task
saves the data buffer from the last Data-OUT PDU, it passes the data
buffer to the Data-OUT PDU.
When reading the data segment of the current PDU, attach the second
data buffer to the current PDU if the first data buffer becomes full.
These are enabled only if DIF is disabled.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib9cfb53fe8c0807a63e58c61bed3bb52f60f4830
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6439
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
It can divide to two parts:
1, UIO driver - sigbus error handling and uevent
process.
2, VFIO - request notify handling.
sigbus error process is in previous patch.
Change-Id: Idc09754b83ae9ddcaea1f2afcbc13e528ead9863
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5768
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
struct sockaddr_nl {
sa_family_t nl_family; /* AF_NETLINK */
unsigned short nl_pad; /* Zero */
pid_t nl_pid; /* Port ID */
__u32 nl_groups; /* Multicast groups mask */
};
nl_pid is the unicast address of netlink socket. It's always 0
if the destination is in the kernel. For a user-space process,
nl_pid is usually the PID of the process owning the destination
socket. However, nl_pid identifies a netlink socket, not a
process. If a process owns several netlink sockets, then nl_pid
can be equal to the process ID only for at most one socket.
There are two ways to assign nl_pid to a netlink socket. If the
application sets nl_pid before calling bind(), then it is up to
the application to make sure that nl_pid is unique. If the
application sets it to 0, the kernel takes care of assigning it.
The kernel assigns the process ID to the first netlink socket the
process opens and assigns a unique nl_pid to every netlink socket
that the process subsequently creates.
Change-Id: Ic0688228105ea6ba4ebae1d130b9271126c37b0e
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7367
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add the sigbus handler to virtio pci device
such as virtio_blk and virtio_scsi.
Change-Id: I07f2f175a585a425ef14050e2bf83bacb6e4c3bc
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5769
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This prepares for an upcoming patch to fix issue #1701 which
requires handling async events outside of the check
completions loop.
Fixes: #1701
Signed-off-by: G.Balaji <gbalajieie@gmail.com>
Change-Id: I4985d814903143511383172b1a443580db33a78f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7416
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In the case that reactor is needed to be valid, add an
explicit assert there.
Change-Id: Ic47030d50a6a940ddf87a3744bae38c94dd7252e
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7320
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
This makes it possible to traverse from the group_impl to
the group. It hasn't been necessary so far but will be in an
upcoming change.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I2bf119461bfd5ac5c8a63a3f1f4560d32e695c75
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7218
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Individual modules will need to mantain their own placement maps for
this to work correctly, especially if modules have different algorithms.
This is a step toward allowing them to do that.
Change-Id: Ie798baa50b94f1e99d6690adb606b936c7b30da0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7217
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is a step toward allowing for multiple maps. Each module may have a
different meaning for placement_id with different uniqueness rules. They
can't all be in the same map.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I608680a08b947a5d5c0818ff66505ed64e1b891e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7214
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Instead, move it down to the modules. This allows modules
to potentially change the value, if they are able.
Change-Id: I08f5fbadf5d1e96b489ddaaca72aa051ce2cb85c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7212
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There are a small, bounded set of placement_ids that the socket layer
will ever encounter, and they remain valid for the lifetime of the
program. The association between a poll group and a placement_id is now
correctly broken when the reference count drops to 0 (in response to
sock_map_release calls), so do not free the entry when the poll group is
destroyed so that it may be reused again.
Change-Id: Iad90e2da7d0860fa8c5cff24f9699bef30cd7bc2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7210
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Allow the map to have entries with a valid placement_id, but no group.
This will be useful later when the order of placement_id discovery and
group assignment may be reversed.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ia39adb3a030135940aeb9eeadf9df78056e59c0d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7209
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We can return error status when processing RELEASE2 without
a reservation, also add a UT to cover this case.
Fix issue #1898.
Change-Id: I56ffa8eabfc0409307500f8740cb627aab9d2f0b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7379
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This reverts commit aaac48880d.
This patch was showing issues with SPDK vhost mappings
when handling larger numbers of VMs.
Fixes issue #1901.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I81bd311d26037dcb9340d85abcb4ea45b20a5170
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7424
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change-Id: I2e47b148209ce4c232dbdc5f20c90548be995e1a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7334
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will ensure that we can't exceed the iovcnt when parse
NVMe PRP list to req->iov.
Also comment that the iovcnt in vfio-user transport is used to track
each gpa_to_vva map, for NVMe PRP list command, the PRP2 itself also
will use one entry, so we need add one more entry for this case.
Fix issue #1864.
Change-Id: I06c7137e2c4637c9501f82a9eb1c8e4395d819cd
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7264
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For NVMe backend device, we should use vtophys to calculate
physical address when doing DMA from/to VM to drives.
Fix#1822.
Change-Id: Ib8fbc371e19e77a20202d408340e7d65644b1eeb
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7261
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously we poll the MMIO callbacks in the context of ADMIN queue's
poll group, here we do some improvement to start a poller to do MMIO
poll, then the group poll will only process NVMe commands while the
MMIO poller will process MMIO access.
This is useful when doing live migration, because the migration region
defined by VFIO is a BAR region, we should stop polling queue pairs
but ack the MMIO accesses during the live migration.
Change-Id: I63bac44889cbe0c31d47599810aab8335dfd4ff5
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7251
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Just code movement for the coming patch.
Change-Id: I7e844bc27a037e086796f9659351f20cdbb517fb
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7333
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch is used to update the field definition related with
work queue in the header file.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I68b81d9dfc2497db89e96f0730785be03dcb8add
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7225
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
NVME_MAX_PRP_LIST_ENTRIES has changed over time, so let's
just remove the reference to the exact value here. Also
explain a bit more why the max size isn't
(NUM_ENTRIES + 1) * page_size.
While here, do a small whitespace cleanup as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib75813788abdd3dbb43192f9fdc27f99b33aeadf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7328
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
nvmf_poll_group_remove_subsystem_msg() disconnects all
qpairs associated with controllers in the specified
subsystem. If it finds any controllers that need to
be disconnected, it sends a message to the running
thread to execute the same function again later.
But when it runs again later, the qpair may no longer
be in the poll group, but there could still be
outstanding messages being sent between threads. For
example, _nvmf_qpair_destroy() needs to send a message
to the ctrlr->thread to clear the qpair mask bit.
All of this could result in the nvmf target starting
to destroy poll groups prematurely. Destroy poll
groups results in the nvmf spdk_threads exiting. If
there are still messages being processed from
the STOP_SUBSYSTEMS target state, we can get
use-after-free errors since processing of those
messages could access freed memory associated with
the exited thread.
Fixes issue #1850.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1e63b9addb2956495a69b5108a41e029f6f9a85d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7275
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This include isn't needed in queue_extras.h itself.
There were a few places that were implicitly
depending on this include, so fix those to include
util.h explicitly.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia962ae5a4403ee8ae15f3106d0d5e7d7412a4535
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7172
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Check if qpair has a poll group during the connect process,
use poll group's statistics or allocate own structure per
qpair. That is done due to not all applications use poll
groups and we want to avoid "if (qpair->group)"
conditions in data path.
Admin qpair always allocates its own statistics
structure but the statistics are not reported
since this qpair is not attached to a poll group.
Statistics are reported by spdk_nvme_perf tool
if --transport-stats and in bdev_nvme_transport_statistics
RPC method.
Change-Id: I58765be161491fe394968ea65ea22db1478b219a
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6304
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These are interface functions that can be used by
an application e.g. spdk_nvme_perf or bdev_nvme
library. The next patches will add usage of these
functions.
Change-Id: I33b88e0e713c2ea5967f9241885e3257c5070577
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6300
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The new 2 API function allow to get and free stats
per poll group. New function to get transport name
have been added to report not only transport type but
also the name.
For now only RDMA transport reports statistics,
other transports will be added later.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I2824cb474fde5fa859cf8196dabac2c48c05709c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6299
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
New statistics include number of poller calls,
number of idle polls and total number of completions.
These statistics allow to estimate % of idle polls
and the number of completions per poll.
Since nvme_rdma_cq_process_completions function
returns number of completed NVMF requests and each
NVMF request consumes 2 RDMA completions (send+recv),
this function was extended to return the number of
RDMA completions.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ifdc1e2e467f645adb5d66d39ff2a379e161fbd77
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6298
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
These statistics allow to estimate WRs batching
efficiency. The number of send WRs equals the total
number of submitted NVME commands.
Change-Id: I96c9836cd6b9070cf5f62e43b4d2738506866e94
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6297
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Although currently acking msg_fd inside function
msg_queue_run_batch() will also ack critical_msg's
notification, it is easier to understand the code
if moving acking msg_fd code into
thread_interrupt_msg_process().
Change-Id: I98267c5c28358334a2c1133e3dbc125788de77ab
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7265
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
As a start of combining interrupt ability into poller,
it aims to get spdk_thread & spdk_poller runnable between
poll mode and interrupt mode with dynamic switching.
spdk_interrupt_mode_is_enabled() indicate whether interrupt
mode is enabled and dynamic switching is permitted. So
spdk_interrupt_mode_is_enabled==true leads to set up
interrupt mode related resources;
in_interrupt flag indicates whether one spdk_thread now
is running in intr mode.
It is possible that spdk_interrupt_mode_is_enabled==true
but in_interrupt==false. this means spdk_thread & spdk_poller
switched to poll mode from interrupt mode due to heavy
workload coming.
To align with spdk_reactor, use "in_interrupt" to
indicate whether one spdk_thread now runs in intr.
Change-Id: I2cd806bf4dec9969f3df88fac7f6b0c0b716d907
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6540
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Restrict spdk_interrupt_mode_enable must be called
once prior to initializing the threading library.
Change-Id: I833ff63fae19882e82154195d03dd7ce56ffb1de
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6707
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will be helpful to simplify the upcoming change.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1f170fe48d2ec1b5ea05da6a8aa3589060c5c32d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6438
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use current_data_offset of task to track the current offset of
large write I/O by following the last patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iec3a371c6050fe11478b6f158259d8f4013f5238
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6424
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Custom transport may not provide the `qpair_abort_request`
callback function, so here for transport API we will just
call it when it's not empty. We will add the callback
support with vfio-user in another patch.
Fix#1883.
Change-Id: Icd82a26bde4ed90068bc85ee04cce9642cb6135d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7291
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We used the controller ready field to indicate ADMIN queue connection,
but the accept poller and ADMIN poll group may run in different
threads, this may lead vfu_attach_ctx() be called several times, so
change the 'ready' to true when a new socket connection is created.
Fix issue #1854.
Change-Id: Iab6ffd6dffb3fff5cf893e79774bc28fe0b2830c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7073
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will make the code easier to understand.
Change-Id: I7112d3fd5f0d6dce9b66d44375b68ce7d1e8951d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7072
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
unmap_q is only be called in unmap_qp, so remove this function to make the
code more clear to read.
Change-Id: I627c7a1efdcb85476cb618fced8b0bfc2d8f1f62
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6886
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When killing QEMU or remote client is terminated normally,
we can release current controller related data structure,
users may restart QEMU to connect the same socket file
again, for the new connection, vfio-user will create
a new controller data structure for it.
Here we add a lock in the endpoint data structure to protect
number of connected queue pairs variable, because controller
data structure is like a session, while endpoint is related
with the socket file, so it's safe here. Moreover, we can
use this lock to protect live migration related data
structures in future.
Change-Id: Ie7060041a253604e7a2242813ec284eae46fe4e8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6862
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The following patches will aggregate multiple Data-OUT PDUs into a
single write subtask and we will not be able to use reqh->buffer_offset
to track the current offset of large write I/O to submit write subtasks.
On the other hand, each iscsi_task or iscsi_subtask is only read or write
Hence rename current_datain_offset of iscsi_task by current_data_offset
in this patch.
The next patch will use it to track the current offset of large write I/O
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I922582c5b9474a3c512f81d0f0425158a38a9a8d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6423
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The following patches will aggregate multiple Data-OUT PDUs into a
single SCSI write up to 64KB. Any variable to accumulate data length
is necessary.
Hence add data_len to mobj and accumulate read data length into
mobj->data_len, and then refer mobj instead of pdu->data and
pdu->data_segment_len to submit write subtask.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6354534769e67c0fd995bbc3c2b4a80d21a23915
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6422
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Wrap an operation to get a data buffer from mempool into a helper
function iscsi_datapool_get() and wrap an operation to put a data
buffer to mempool into a helper function iscsi_data_pool_put().
Use inline for both functions.
Besides, as a minor fix, remove duplicated file inclusion between
iscsi.c and iscsi.h.
7
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia3005dffaa93a6bca16f19bb467fb5b64ae1aad2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6366
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: sunshihao <sunshihao@huawei.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add crc32c to struct spdk_iscsi_pdu and initialize it by SPDK_CRC32C_INITIAL,
and then use it as the initial value of _iscsi_pdu_calc_data_digest().
Separate finalization of crc32c into _iscsi_pdu_finalize_data_digest().
Move the definition of related macro constants from iscsi.c to iscsi.h.
iscsi_pdu_calc_data_digest() is used for read too. So setting
pdu->valid_data_bytes before calling iscsi_pdu_calc_data_digest()
for read.
Data split will be supported only if DIF is disabled, and hence
DIF case is not changed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9d24f605fd0d452782e17695b613cd2f63d2e42f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6421
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The following patches will want to aggregate multiple Data-OUT PDUs
into the same data buffer, but it will be 64KB at most.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I72eabbeae0b027c2fbff2a5837d180b06b0a1b49
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6418
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The following patches will change the handler for Data-OUT PDU to
submit subtask only when 64KB data is read or F bit is set.
Previously, we had created a subtask when processing header and
before reading data segment. Creating a subtask beforehand is not
convenient for the following changes.
Hence create a subtask after reading data segment.
If LUN is removed while processing the Data-OUT PDU, the corresponding
primary task will be terminated by iscsi_clear_all_transfer_task(),
and any subtask completion is not sent to initiator. Hence we can
reject the received Data-OUT PDU safely.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifb6d6988676080b458b31d12fef065f3c1de0cb6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6415
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The hotplug lib can be used for pcie devices
such as nvme, virtio_blk and virtio scsi.
For the sigbus handler, there is only one in a
process and it should handle all the devices.
And align nvme to the hotplug lib
Add the ADD uevent support for allowing the
device hotplug.
Change-Id: I82cd3b4af38ca24cee8b041a215a85c4a69e60f7
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5653
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Introduce new utilities NVME_CTRLR_ERRLOG, NVME_CTRLR_WARNLOG and so
on to output the ctrlr's identification at different log levels.
For RDMA and TCP, the subnqn will be output and for PCIe and custom,
the traddr will be ouptput.
Change-Id: I81a112463bf752999aa1fe4e0c867d88e09a2f64
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7057
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Vasuki Manikarnike <vasuki.manikarnike@hpe.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This can be handled in a cleaner way by having the sock group
create/close operations take an extra reference.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Id701b6dd9a19b01cd40e0d95eb870aef977eea99
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7208
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
added to a group
The process of adding a socket to a group may, in some scenarios, change
the placement id.
Change-Id: I879d9641099d86978ede5d5e2be1a72eda65a79b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7207
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also fix the comment. It's never going to make sense to add a socket
to a group twice.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Id4845b77114aef32bbe4ea0e53d2e1fde8e116f4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7204
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Using nvmf_tcp_destroy() would destroy ttransport->lock, which hasn't
been initialized by that point yet.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ie9ced97ef520236dddaa70453b6807e8382ce534
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7235
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will be useful as the same purpose as
spdk_io_channel_iter_get_io_device() and will be used in the
following patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id45f5980c65543703b91df2afeb47448232fe503
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7237
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
When a request is submitted, it may have incorrect iov
alignment that doesn't fit PRP requirements. In the
current version an internal function fails such a request
and returns a NULL pointer. This is mapped to -ENOMEM
error which is returned to generic bdev layer where
such a request is queued in a "nomem_io" queue and
later can be resubmitted. That is incorrect and such
a request must be completed immediately. To fail the
request, we need to differentiate between -ENOMEM and
other cases, so we pass a pointer to a result to
local nvme functions
Change-Id: I7120d49114d801497a71fca5a23b172732d088de
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7036
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function will be used the next patch, current
behaviour remains unchanged
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ie74c7395f67a08b0cac018eb5114f358a6b583cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7092
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The max_io_size transport option should be a power of 2 and be >= 8KB.
Max data tranfer size is defined in NVMe-oF spec as 2^(mdts cmd field) * 4KB.
Mdts cmd field is calculated as spdk_u32log2(transport->opts.max_io_size / 4096),
so max_io_size < 8KB results in mdts=0, which means no size limit (according to spec).
User can set max_io_size = 0 explicitly to allow no size limit.
Signed-off-by: Maciej Szulik <maciej.szulik@intel.com>
Change-Id: Id88a77efce5f217e1fc7750f61c0bd330aaa3791
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6384
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The dbdf format is xxxx:xx:xx.x and with the wrong
format the rte_devargs_parse always fails.
Change-Id: Ia34bc5e68f6401bb25907d5d07c65636b4f491b5
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7140
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
We can send a message to repeat subsystem pause
and free a context that will be used later
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ia5e8b0ff43f5e38bd8e659a8a64d42926e1d3c6e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6661
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
With this change, each polling group will use one
accel_engine channel. This change will be more suitable
to utlize the underlying accelerated device.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ibab183a1f65baff7e58529ee05e96b1b04731285
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7055
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Actually we already do this when removeing a memory region, but
the check for it is too strict, we should unmap queue pairs when
the queue pair is in the memory region.
Change-Id: Ia646a0255e32ecdd0a70537a8011ce622eb59195
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6861
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The error response should be processed at the beginning of this
function.
Change-Id: Id583951c82981cf58984ab68b23ad6f7ea80cd3f
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6859
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When starting VM, there are error logs such as:
vfio_user.c: 510:acq_map: *ERROR*: Map ACQ failed, ACQ 3ffde000, errno -1
vfio_user.c:1043:map_admin_queue: *ERROR*: /var/run/muser/domain/muser1/1: failed to map CQ0: -1
vfio_user.c:1103:memory_region_add_cb: *NOTICE*: Failed to map SQID 1 0x3ffd8000-0x3ffdc000, will try again in next poll
This isn't the error case, because when the Guest memory hot add/remove from QEMU, vfio-user
target will stop and unmap all queue pairs and remap them again, so let's use a more friendly
log instead.
Also use a notice log when adding listener.
Change-Id: Iaa4dc29e02523b5e85ec716d200ec355f8a575ed
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6650
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add support in bdev_zone.h for getting the maximum zone append data
transfer size.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I61203e64d51601232c6578a090fa52975364c1f3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6910
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The specification for Maximum Data Transfer Size (MDTS) says this field
should include the length of metadata, if metadata is interleaved with the
logical block data. However, some drives can support MDTS without counting
the interleaved metadata, so for this case SPDK will only use data length
without interleaved metadata length.
Change-Id: I29920a25885699e2689be043b87122367be0e416
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6813
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Although the value stored to 'rc' is used in the enclosing
expression, the value is never actually read from 'rc'
Fixes#1860
Change-Id: Id1001552e635968e373cad0fd27d7bda41d887cd
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7082
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When param len > 0, param data must not be NULL.
So we add a comment to make it clearer.
Change-Id: I053c3e45ddb8fa23fb67ce899d32dadd8e286946
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6618
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove the polling group check. Because at this moment,
the qpair is not added into a polling group. If we do
not remove it, we will never enable zcopy feature for
I/O qpair.
And in sock implementmentation, we already fixed the zero copy
handling if a socket is not in a polling group. See
posix_sock_flush function. So we can fix this issue if we directly
remove this check.
Reported by: Aleksey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I969936c4b6c7f13cbfa4d6eb479010c53f3e384a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7056
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Add print to confirm how groups/queues/engines are being
programmed based on the init RPC used.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ic9462c19c6899478a803433f90d9db9249dd5ca1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6325
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
DPDK has added APIs for registering externally allocated
memory regions. Use them instead of doing our own thing.
We have to postpone spdk_mem_unregister call in
memory_hotplug_cb() because SPDK mutex (g_spdk_mem_map_mutex)
and DPDK mutex (memory_hotplug_lock) may overlap
and cause deadlock when one thread is calling spdk_free()
(locks memory_hotplug_lock first and then tries to lock
g_spdk_mem_map_mutex) and another one is calling
vhost_session_mem_unregister() (locks g_spdk_mem_map_mutex
first and then tries to lock memory_hotplug_lock).
Change-Id: I547b4ffc3987ef088a1b659addba1456ad760a71
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3560
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Purpose: The default value of placement_id in spdk_sock
should be set to -1 in spdk_sock_connect_ext. If we still let it to 0 and call
sock_get_placement_id for the spdk socket used in the initiator side,
we will never get the correct placement_id when enable_placement_id configuration
is configured, because we will always get placement_id = 0
instead. And the same comments in spdk_sock_accept function.
And this patch also change the judgement of placement_id in other related places.
PS: Why we need to explictly set default placement_id = -1, because when use
"enable_placement_id=2" for the socket, placment_id=0 is a valid value.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I9fcc3a1c6a5007c22d11da5aeed0022577652a76
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6955
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
nvmf_subsystem_remove_listener RPC handler may fail to remove
the listener (e.g. it doesn't exist) but in eror case we
spdk_nvmf_transport_stop_listen_async and send an error
response. In a completion callback passed to
spdk_nvmf_transport_stop_listen_async we try to send a
response again but the response handler had already been
released and we dereference a NULL pointer.
The fix is to skip spdk_nvmf_transport_stop_listen_async
in error case and continue with the subsystem resuming.
Fixes github issue #1821
Change-Id: I8d96b943cca25d9f95d19e8ea600242f019e6b21
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6699
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Updating thread stat directly in spdk_thread_poll()
will cover the time spend in msg process in interrupt
mode.
Change-Id: I9b71790281f10fb784ef4fd4059c41438bbaabac
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6722
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
thread_interrupt_msg_process is registered to thread's
fd_group, so it will be called inside spdk_thread_poll.
Since spdk_thread_poll will set/restore tls_thread,
there is no need to set or restore it again here.
Change-Id: Ida10c736ef904ff975eeb42fd0cccad9fd8317cf
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6720
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Move get_rusage directly into reactor_run(), then both
poll mode and interrupt mode can check rusage info.
Change-Id: Id5926752cfb19c13cb969fbfbb35f643e5d49d9a
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6718
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
In interrupt mode, reactor spends its valid cpu cycles
to process registered thread interrupt function. So we
can count idle_tsc and busy_tsc in it, and update
reactor's last_tsc in it.
Change-Id: I65f4ae7d3b1e5c7c5c06937d6855f5d1b5c0349f
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6716
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When we iterate qpairs that belong to a subsystem
and try to disconnect them, there is a chance that
some qpair can be disconnected on transport level,
e.g. the initiator may receive a disconnect for
the first qpair and disconnect others. That may lead
to a dead loop when we call spdk_nvmf_qpair_disconnect
with a callback, the callback is called immediatelly
and tries to disconnect the qpair again.
To solve this problem, move part of nvmf_poll_group_remove_subsystem
function to another function nvmf_poll_group_remove_subsystem_msg
which disconnects all qpair at once without any callback
and calls itself via thread_send_msg untill all qpairs are
disconnected.
Fixes github issue #1780
Change-Id: I1000cda73e6164917fc13f7f374366af90571b99
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6597
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The NVMe Zoned Namespace Command Set Specification has, in addition to a
Max Open Resources limit, a Max Active Resources limit.
An active resource is defined as zone being in zone state implicit open,
explicit open, or closed.
Create a function spdk_bdev_get_max_active_zones() in the generic SPDK
zone layer, so that this limit can be exposed to the user.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I6f61fc45e1dc38689dc54d5649c35fa9b91dbdfc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6908
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This change refactors the way nvmf_get_stats RPC works.
The RPC layer passes JSON write context to custom dump function defined within transport ops.
The RPC layer no longer needs to know the structure of transport poll group statictics.
Functions and structures used in the previous flow have been deprecated and will be removed.
JSON returned for RDMA transport should be the same as before this change.
Signed-off-by: Maciej Szulik <maciej.szulik@intel.com>
Change-Id: I03308c45be120793d316bf79814a1295afd9fb95
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6681
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Current update_core_mode is started from the next
core of the master core.
For futher's new scheduler, starting from master
core is required. This change won't impact current
schedulers' behavior.
Change-Id: Ibffd2c93a4288b5e87945ae523ccba88091c4031
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6757
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
spdk_nvmf_tgt_listen() is deprecated, so moved
the remaining instance to spdk_nvmf_tgt_listen_ext().
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I32b54e99f83fa10f1074f80aad82bb0608c9ae11
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6630
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This API has been deprecated since SPDK 20.07,
see commit (b2947f52).
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Idb45906c81ea5682c6a67def0265910266d861b5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6629
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
This patch refactor the pdu sending logic with the async manner,
then if the group contains the accel engine, we can use it.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I2d669c0a3255d7a8898441e406906add2f3a3556
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6759
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Purpose: To setup an accelerated function callback
for created spdk_nvme_poll_group. In this patch,
we just create the interface. The real usage of this
call back will be provided in the other patch.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I0d936aa4eba4dbfcc0137942156b9f2919eb5b78
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6758
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
It is invalid to try to delete a NULL qpair, so do
not check for it in nvme_tcp_ctrlr_delete_io_qpair and
return an error when NULL. Just change it to an
assert instead. This makes it consistent with pcie
and rdma.
While here, add an assert in rdma as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic2f76deecb21b78749dac85e33fb1fa0d14a1239
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6917
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
spdk_bdev_io_complete_nvme_status() had set the bdev_io status to
NVME_ERROR even if it is aborted, i.e, sc is ABORTED_BY_REQUEST.
Fix it to ABORTED, and verify the fix by unit tests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6b22547105a6d7986747053f93875854336959b3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6884
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
These three goto cases are using device->fd,
so put them in cleanup, it has no impact on
vfio_user_dev_setup failed.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I28028dda2977cf8158e703afa5b8af38c48f3d85
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6922
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I191ad5e3b153fb563256eba1aa695716f66db788
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6377
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is an internal API used in several places. The call can fail, so
make sure it can report that correctly.
Change-Id: Iac0ed2c8299c9dd3d2556070278a2224c3807b7b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6640
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It is possible that nbd pthread is created but not executed,
then spdk_nbd_stop is call before nbd_pthread's execution,
but nbd pthread starts to execute while nbd is totally stopped.
This patch can get spdk_stop_nbd aligned with nbd pthread.
Change-Id: I57cc92b94d36cd706616c9058134f716f0812892
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6278
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
This is better naming to represent their usage.
retry_poller and count can also be used to do
async nbd_stop procedure in the following patch.
Change-Id: Ie5a74e4add3f1a6c7257df00aded8b5d52a09955
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6277
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_vbdev_register() was deprecated in SPDK 19.04.
config_text field in spdk_bdev_module was deprecated in SPDK 20.10.
spdk_bdev_part_base_construct() was deprecated in SPDK 20.10.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib795ccdf61154c168032ccf8b81ea77e5e663851
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6628
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This statistic is incremented when we don't reap
anything from the CQ. Together with the total number
of polls it can be useful to estimate idle percentage.
Change-Id: I61b51d049b0bc506fb8a896e225187e46e75a564
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6295
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Leverage SO_INCOMING_CPU to get the CPU affinity of connections
(sockets). And allocate the connections to specific poll groups,
which aims to utilize cache locality.
From our test:
6 P4600 NVMe on target,target uses 8 cores, NIC irqs are bound to
these 8 cores, and initiator side uses 24 and 32 cores,
we can get 11%~17% randwrite performance boost for posix, and 8%~12%
for uring.
Change-Id: I011e0a21502c85adcccd4a14fbe9838b43f54976
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5748
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The shadow registers need to be zero when the qpair is
created. This happens automatically when a given qid
is used for the first time, since the page is allocated
with zmalloc. But if a qid is reused, we need to make
sure its shadow registers are cleared *before* we create
the qpair again with the same qid.
So clear the registers in nvme_pcie_ctrlr_delete_io_qpair,
just after the cq is deleted.
Fixes issue #1795.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I08c30d1ea248559a01b802cd132dd57199b491b5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6752
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If the iov_len is 0, it is OK for the iov_base to be
NULL.
Reported-by: Yi Ren <yunye.ry@alibaba-inc.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I45c9be68fc2975bf2abd91a9d77935ce516c5210
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6706
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Previously we only process Read/Write/Flush IO commands, we should
not block the DSM command in vfio-user layer if the backend block
device can support it.
Change-Id: Ia6b90397adcc36015f331f011a5bdf3e3d6562d8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6525
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
max_delay_us was deprecated in SPDK 19.04.
config_file was deprecated in SPDK 20.10.
master_core/pci_blacklist/pci_whitelist were deprecated in SPDK 21.01.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie8be4c347de58044a7c3d5b1329d96e47ce084b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6594
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously the callback parameter for this function is NULL, this will
cause segment fault, so pass the correct parameter here.
Fix#1817
Change-Id: Ie768b7bf4a72862d16a44742ab3032803d0939a2
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6690
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Community-CI: Mellanox Build Bot
Can not remove device in the remove event
callback as we can not unregister the remove
callback. So use the alarm_set to fix this issue.
Fixes#1809
Change-Id: Ib86bc4eeecc0fe2bc51538e28684d015405e8835
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6553
Reviewed-by: Vasuki Manikarnike <vasuki.manikarnike@hpe.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
nvmf_create_transport rpc parameter to configure the CQ size helps
if the user is aware of CQ size needed as iWARP doesn't support CQ resize.
Fixes issue #1747
Signed-off-by: Monica Kenguva <monica.kenguva@intel.com>
Change-Id: Ia9ba2b5f612993be27ebfa3455fb4fefd80ae738
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6495
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
iSCSI library had used goto label to consolidate iscsi_reject()
calls but calling iscsi_reject() in return statements will be simpler
and easier to read. This patch series focuses on Data-OUT PDU processing,
and so change goto label to function call in return statements for
Data-OUT PDU first.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5f30aff764820aab87233ea8cf22263611591a96
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6533
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The spec does not disallow TEXT PDUs with no data. In that
case, just return immediately from iscsi_parse_params.
This avoids a NULL pointer dereference with a TEXT PDU that has
no data, but CONTINUE flag is set.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2605293daf171633a45132d7b5532fdfc9128aff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6319
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
instead appending to output file (which occurs on each make execution)
sed is used to modify `Requires` section of the *.pc file
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I1a8cb1ec35bf583293c7174a413302191bbbd735
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6460
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These statistics can help to estimate efficiency of
Work Requests batching and show busy/idle polls ratio.
Send: the doorbell updates statistics for verbs
provider are incremented per each ibv_post_send call,
for mlx5_dv per each ibv_wr_complete call.
Recv: the doorbell updates statistics for both
providers are updated when either ibv_post_recv
or ibv_post_srq_recv functions are called.
Each qpair on initialization accepts an optional
pointer to shared statistics (nvmf/nvme poll groups).
If the pointer to statistics is not provided then
qpair allocates its own structure. That is done
to support cases when NVME RDMA initiator doesn't
use poll groups, so we can avoid checks that qpair
has statistics in IO path
Change-Id: I07dea603cb870b85ea23c42e8e2c4520b1c66252
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6293
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This change follows the large read which submits only subtasks, and
simplifies large write cases.
Associate the PDU which sends a SCSI Write PDU with immediate data
with both the primary task and the first secondary task. Then stop
incrementing reference count of the primary task twice.
As same as the last patch, copy the failure status directly among
the primary task and the secondary tasks because the primary task
is not submitted now. Then remove related data from struct
spdk_iscsi_task and related helper functions from conn.c.
Finally simplify unit tests for process_non_read_task_completion().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I54aa38c9b9fb7d7352da040dcdd8bcc1b1756a83
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6344
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For the following nvme controller statemachine states:
NVME_CTRLR_STATE_IDENTIFY_NS
NVME_CTRLR_STATE_IDENTIFY_ID_DESCS
NVME_CTRLR_STATE_IDENTIFY_NS_IOCS_SPECIFIC
The statemachine can either:
- Jump to succeeding state
- If active ns list is empty, jump directly to NVME_CTRLR_STATE_CONFIGURE_AER
- In the unlikely case if NVMe completion error, jump to NVME_CTRLR_STATE_ERROR
Simply this such that we either:
- Jump to succeeding state
- In the unlikely case if NVMe completion error, jump to NVME_CTRLR_STATE_ERROR
This will help to reduce the complexity of the nvme controller statemachine,
especially considering that there are new additional states
(NVME_CTRLR_STATE_IDENTIFY_NS_DIRECTIVE and
NVME_CTRLR_STATE_CONFIGURE_NS_STREAMS) currently on review that would continue
with the bad habit of having three possible jump states instead of just two.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I3242052b1108afcd8adbe6d0378b1358fef58ec8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6521
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: sunshihao <sunshihao@huawei.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
bus_pci depends on pci so it shall be listed before, otherwise it can
result in linking issue e.g.
/usr/bin/ld: /home/jkalwas/spdk/dpdk/build/lib/librte_bus_pci.a(bus_pci_pci_common.c.o): in function `pci_parse':
pci_common.c:(.text+0x6e): undefined reference to `rte_pci_addr_parse'
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Idff446df82c37844edc122d5171e8ffa684b296f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6404
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Purpose: To get the optimal group, we need the socket information.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I17b048a402fbf002307dd225f64b20a9f876d642
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3324
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
This patch is used to leverage accelerated engine to compute
the data digest in the following case:
1 DIF is not used.
2 The data to compute is aligned with size 4, i.e, %4 = 0.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I51fb6e3ab04391062b244cba6e249c8e20d3180f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6014
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch added the chained crc32 support API for both batched
and non batched mode usage. And also update the accel_perf
program in order to use the revised accelerated crc32 function.
For example, you can use the following command:
./build/examples/accel_perf -C 4 -q 128 -o 4096 -t 5 -w crc32c -y
In this command, "-C 4" means that caculate the chained
crc32 for an iov array.
(even if you do not have the accelerated DSA hardware)
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ifede26f9040980b5791da8e5afef41177eede9f6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6457
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For a SGL using PRPs, there is always an alignment check of the start
address in the beginning of the loop. This is stored in start_valid.
If the start is indeed valid, we might fetch a new SGE,
and then perform a second alignment check on this new SGE.
However, this second alignment check is done unconditionally,
meaning that for the last SGE in a request, we check if the
same start address is aligned twice.
Only perform the second alignment check if we actually fetched
a new SGE.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I9df8038c650b0879f838d1d9d895e8dd7172840d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6493
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The statement causes this issue is:
assert(group_impl->num_removed_socks < MAX_EVENTS_PER_POLL);
The call trace is:
The previous solution is:
commitid with: e71e81b631
But with this solution, it will always add the sock
into the removed_socks list even if it is not under polling
context by sock_group_impl_poll_count. So it will exceed the size of
removed_socks array if sock_group_impl_poll_count function will not be
called. And we should not use a large array, because it is just a workaround,
it just hides the bug.
So our current solution is:
1 Remove the code in sock layer, i.e., rollback the commit
e71e81b631. This patch is
not the right fix. The sock->cb_fn's NULL pointer case is
caused by the cb_fn of write operation (if the
spdk_sock_group_remove_sock is inside the cb_fn). And it is not
caused by the epoll related cache issue described in commit
"e7181.." commit, but caused by the following situation:
(1)The socket's cb_fn is set to NULL which is caused by
spdk_sock_group_remove_sock by the socket itself
inside a call back function from a write operation.
(2) And the socket is already in the pending_recv list. It is
not caused by the epoll event issue, e.g., socket A changes Socket B's
cb_fn. By the way, A socket A should never remove a socket B from a polling group.
If it really does it, it should use spdk_thread_sendmsg to make sure
it happens in the next round.
2 Add the code check in each posix, uring implementation module.
If sock->cb_fn is NULL, we will not return the socket to the active socks list.
And this is enough to address the issue.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I79187f2f1301c819c46a5c3bdd84372f75534f2f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6472
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
