This reverts commit b32cfc467b.
This commit fails the ABI checks and only got through because the checks
were disabled until 21.04 hit.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Id26b8f8ba551193d99b1ccbd31b35378b4095a20
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7731
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Today the in-guest nvme device shows physical_block_size=512 even though
the backend iSCSI bdev supports physical_block_size=4K
iSCSI targets exposes physical block size using
logical_block_per_physical_block_exponent in READ_CAPACITY_16
NPWG is one of the way to let Linux nvme driver set
physical_block_size of the nvme block device.
This patch adds spdk_bdev.phys_blocklen which is updated if the iSCSI
backend exposes physical_block_size.
Later phys_blocklen is used in nvmf to set NPWG and NAWUPF to report
back during NS identity.
Linux driver uses min(nawupf, npwg) to set physical_block_size.
Similarly in scsi_bdev fill lbppbe in READ_CAP16 response
based on spdk_bdev.phys_blocklen.
Fixes#1884
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: I0b6c81f1937e346d448f49c927eda8c79d2d75cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7310
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We have seen that dptr was not alligned to 4k using cuse. Added allignment of data in cuse ctx to 4k same as it is done in nvme_allocate_request_user_copy
Signed-off-by: jwyka <jakub.wyka@intel.com>
Change-Id: Ic5c2482eae20d64ba467016eb61f5255467f70a9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7453
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI
This check was disabled after 21.01 LTS to allow for
clear break of SO versions. Now that SPDK 21.04 is being
released, this test should be reenabled.
See following patch for details:
(e4070ee0)so_ver: increase all major versions
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I8a299a340338e7a2ab3439b81153818778b4c93a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7616
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
test script 'test/interrupt/reactor_set_intr.sh' will
do various reactor set intr operations on interrupt_tgt
without spdk_thread and with spdk_thread.
Change-Id: Ie5af1dc68b0272c34a91e8a66b78088c3794907c
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7348
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When performing snapshot creation the I/O is frozen
during the process. The blob persists for extent page
allocation is delayed until snapshot creation is finished.
This results in multiple blob persists executing one after
the other, with only intent of writing out updated extent table
pointing to new extent pages.
Since blob->state is marked DIRTY before issuing each persist,
but a single persist completion marks state CLEAR.
Blob serialize correctly expects each persist to contain
dirtied metadata, in order to avoid unnecessary md writes.
Since all other instances of marking blob DIRTY is explicit,
assert in blob serialize is left as is.
Instead when running the queued up blob persists, the blob
state is marked DIRTY.
Side effect is that it will write out same md in some cases.
Fixes#1909
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I39f37299f3f0ebfccbdd4063781b5ecce286e993
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7640
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_vtophys() takes a mapping_length parameter, so
it can return the length for which the returned
virtual address is valid.
But spdk_vtophys() will only return the max
between the valid length and the input mapping_length
parameter.
So the nvme SGL building code for contiguous buffers
was broken, since it would only set the mapping_length
once, before the loop started. Worst case, if a buffer
started just before (maybe 256 bytes) before a huge page
boundary, each time through the loop we would create
a new SGL for only 256 bytes at a time, very quickly
running out of SGL entries for a large buffer.
Fixes#1852.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib1000d8b130e8e4bfeacccd6e60f8109428dfc1e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7659
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The IDENTIFY_CNS quirk was applied as part of QEMU
OCSSD handling in commit 6442451b. But it was applied
not only to the OCSSD dev ID, but also the dev ID
for non-OCSSD NVMe controllers.
Starting with QEMU 5.2, QEMU will allocate a default
256 namespaces, but only some are active (associated
with the backing disks specified by the user). QEMU
supports IDENTIFY_CNS, but since this quirk was set,
we wouldn't send a real IDENTIFY_CNS and instead
would just populate a fake list where all namespaces
were considered active. This causes breakage in
a few places - mainly where we iterate through
the active namespaces, and then are surprised that
calling spdk_nvme_ns_is_active() returns false.
It was also breaking bdev_nvme_attach_controller RPC,
since by default we can only support returning 128
names, but since all of the namespaces were deemed
active, it was trying to return 256.
Fixes#1916.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4fdd27e0e36f0ac07a95f9f29aa83357e8505a45
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7658
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use -Wno-stringop-overflow only for GCC > 10.
Change made to use the same condition as in
dpdkbuild/Makefile.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I6a396e250807f46720ff5dcaf21f13d802404a1b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7537
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
DPDK now officially supports only GCC > 4.9.0.
Some older systems like Centos7 (gcc 4.8.5) can still
build DPDK, but sometimes fail due to -Werror enabled.
Disable this option to increase build success chance.
Fixes#1891
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I0950ad01e2d8361851e9ac42c556004980e00ff4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7536
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is first commit that should go into latest SPDK
after the code freeze for SPDK 21.04.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I515772a0c90a362bd4a23a7717281a8d7a9e4393
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7615
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
When zcero copy send is enabled and used by initiator,
it could significantly increase latency in some payloads.
To enable more fine graing configuration of zero copy
send feature, add new parameters enable_zerocopy_send_server
and enable_zerocopy_send_client to spdk_sock_impl_opts to
enable/disable zcopy for specific type of sockets.
Exisiting enable_zerocopy_send parameter affects all types
of sockets.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I111c75608f8826980a56e210c076ab8ff16ddbdc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7457
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There are three modules implementing the bdev-zone API:
bdev_nvme, bdev_ocssd, and vbdev_zone_block.
For all three modules, the number of zones can be calculated using:
block_count / zone_size.
To avoid this calculation being performed everywhere, create a helper
function in bdev_zone.h, together with the other zone APIs, such that
a user can easily get the number of zones.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I2967b15a604ab8bf4420588e7510b9820762f925
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7451
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Each fio thread can have multiple files that it writes to.
Which is why the per thread spdk_fio_setup() fio callback does
for_each_file() {...}.
One of these files can be e.g. a zoned namespace with append support,
another file could be a zoned namespace on another controller without
append support, and a third file could be a conventional namespace
(which never supports the zone append command).
Right now, we will return a fatal error if a thread has e.g. a zoned
namespace (with append support) together with a conventional namespace.
Instead of returning a fatal error, enable zone append only on the
namespaces that support zone append, and allow namespaces that do
not support zone append to continue as usual (using regular writes).
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ic6456d408cbe91563acd337a4b70c6e871fe34c6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7611
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Commit f69367c788 ("fio_nvme: defer qpair allocation to file_open
callback") moved the qpair allocation from spdk_fio_setup() to
spdk_fio_open(). This broke spdk_fio_report_zones(), which needs a
qpair in order to get the initial state of the zones.
setup_files() in FIO calls td->io_ops->setup() (spdk_fio_setup()),
followed by zbd_init_files(), which calls zbd_init_zone_info(),
which calls zbd_create_zone_info(), which calls parse_zone_info(),
which calls zbd_report_zones(), which calls td->io_ops->report_zones()
(spdk_fio_report_zones()).
i.e. spdk_fio_report_zones() will always be called directly after
spdk_fio_setup(). .report_zones() is even called before the per
thread ioengine .init() callback.
Therefore, spdk_fio_report_zones() is called before the ioengine
.open_file() callback.
This is done in order to ensure that all threads will share the same
zbd_info struct, which contains the per zone locks.
Since SPDK nvme ioengine no longer initializes the qpairs in .setup(),
create a temporary qpair in .report_zones().
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ic376ac7844e40fceff092900ae7e4714bccf38e6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7590
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Commit f69367c788 ("fio_nvme: defer qpair allocation to file_open
callback") moved the qpair allocation from spdk_fio_setup() to
spdk_fio_open(). This broke --initial_zone_reset, which needs a qpair
in order to perform the initial zone reset.
While at it, move the initial zone reset from spdk_fio_setup() to
attach_cb(), as this is where all the other fio options are verified.
By placing it in attach_cb(), after the duplicated file check, we
avoid the need to loop through the whole fio_thread->fio_qpair list.
Since SPDK nvme ioengine no longer initializes the qpairs in .setup(),
create a temporary qpair, if the --initial_zone_reset option was used.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I7950304c58aef3ec783f7cd99cfb1e7d7817a197
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7589
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
On host side the connections are created and then added to thread's
poll group. Those connections could use different NIC queues underneath.
To route all connections of poll group through single queue a unique
placement id is chosen as group_placement_id and each socket of poll
group is marked with group_placment_id using getsockopt(SO_MARK) option.
The driver could use so_mark value of skb to determine the queue to use.
Change-Id: I06bda777fe07a62133b80b2491fa7772150b3b5d
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6160
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Commit e9ebbdaefc updated
custom patches for mainline DPDK, but did not keep their
previous versions. We still need the old patches to build
with older DPDK versions.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ibe222a444bed2fdee63c8dcfcebc8402bb991fbe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7610
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
tcp transport doesn't send a response capsule when
c2h_success is set even if cdw0 or cdw1 are non-0.
Signed-off-by: Ed rodriguez <edwinr@netapp.com>
Signed-off-by: John Meneghini johnm@netapp.com
Change-Id: Ieba81fcc50342a2009f7931526e6f8392e26b6a5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6808
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The RPC is for testing purposes, as such does not need to provide
documentation in SPDK proper.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia153ad326e4c2ac43b511f9c2fba4aa95f1e3295
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7607
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Plugin RPC method 'reactor_set_interrupt_mode' is added
to set specific reactor run in interrupt mode or back
to poll mode.
Based on this RPC, scenarios later can be implemented
to verify interrupt mode functionality.
Change-Id: I9785e6942299bab7c949780faf18216e293f0b1d
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7347
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When do spdk_reactor_set_interrupt_mode, if reactor
already runs in the specific mode, directly call
callback function before return 0;
Change-Id: I1fd8b753e9881755aa128aabe6d1e2749e58b39b
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7549
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We do not want to do any further work on adding
the sock to the group if the epoll_ctl (or kevent)
fails.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I44b6dc86ce5676aa1b8d6c50b86f22758e4e37fa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7594
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
All JSON-RPCs must be documented in jsonrpc.md
Change-Id: Iec9119a01433fd0cbe4df4477ce94cc2feeb0d54
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4074
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Community-CI: Mellanox Build Bot
The net library isn't needed - everything these RPCs
do can be done externally to the SPDK application.
This library will be removed in the 21.07 release.
As part of the deprecation, mark the net RPCs as
private. This will prevent an upcoming patch from
complaining that these RPCs are not documented.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I61118820fd29e410dca763595c3d9fd01a57373d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7592
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
suppression
When all of the following conditions are met:
- non-blocking socket
- zero copy is enabled
- interrupts are suppressed (i.e. busy polling)
- NIC tx queue is full at the time sendmsg() is called
- epoll_wait sees there is already an EPOLLIN event
then we can get into a situation where data we've sent is queued
up in the kernel network stack, but interrupts have been suppressed
because other traffic is flowing. This makes the kernel miss the
signal to flush the software tx queue. If there wasn't also already
a pending EPOLLIN event, then epoll_wait would have been sufficient
to kick the system out of this state. But when all of this aligns,
it hangs.
We deal with this by detecting the scenario and calling poll(), which
will force the kernel to issue the pending transmits.
Change-Id: Ifb247159b7de16c8fc72a90f0333f5b421c8bd07
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6750
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Added note to the nvmf documentation about an issue [1] with destroying
qpairs on E810 cards in RoCE mode. The note needs to be removed once
the issue is resolved.
[1] https://github.com/spdk/spdk/issues/1840
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ie03a7a662391bd738848f71e582748a334a6ffd5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7577
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For pollers that don't natively support interrupts, using
a busy wait mechanism temporarily.
An interrupt falicity for busy wait will
be registered for non-periodic poller.
Internally, an eventfd is created to each busy wait
poller. Write the eventfd when set interrupt mode,
and only read the eventfd when set back to poll mode,
then the busy wait poller will be called repeatly
in interrupt mode.
Change-Id: Iaeae14d1ff69fd9ef7d606a0b0a70193764513e9
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6711
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
In next patch, if poller doesn't have a period, eventfd
will be created which's always busy automatically.
This eventfd can be combined with timerfd. So rename
timerfd to interruptfd.
Change-Id: Ibffa30ecfcaa73e55f47e97fac854641b74f2dfb
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7546
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Defined callback for spdk_poller to adapt itself to
set interrupt or poll mode. The callback can
be registered to spdk_poller by new function
`spdk_poller_register_interrupt`
Interrupt callback operations for period poller are implemented,
so period pollers now are interruptable.
Change-Id: I2aa6ebfdd75f76b85a70af7e42530be4131ddc8a
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5752
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
These refined functions are prepared to adapt period
poller to following poller switchable API.
Change-Id: I34d2a785fa0e757b97b0dac5ccf24819d75e0184
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7156
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
The interrupt mode of spdk_thread can be operated
by reactor based on reactor's interrupt mode when
the spdk_thread is scheduled or the reactor is set
into interrupt mode.
Change-Id: Ibeef7ffb759589a7b372bd78e59e3410be061383
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6709
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_thread_set_interrupt_mode can get spdk_thread run
between intr and poll mode. It is only valid when thread
interrupt facility is enabled by
spdk_interrupt_mode_enable(). Currently, this function
is limited that no poller is registered to the spdk_thread.
Change-Id: Iba54accd5976beb6f6e155014903928ce2858e36
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6708
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
All the other RPCs use underscores in the names of their fields, so
`framework_get_scheduler` should also use them instead of the spaces.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I0e9edd7c59a4ab61643a7b558a2359e1805ed0b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7557
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
DPDK recently clarified some semantics on the rte_devargs 'data'
and 'args' fields. This actually breaks our use of the 'data'
field to store the 2 second timeout timestamp for delaying
attach to newly inserted devices. Investigating this further,
it does not seem our use of the 'data' field was valid - it just
happened to work until now.
We could use the 'args' field now. But knowing whether to use
'args' or 'data' would then be dependent on the DPDK version.
We cannot use RTE_VERSION_NUM to decide, because this is a
compile time decision, and it is possible in shared library
use cases that we could actually link and execute against a
different version of DPDK than we built against.
So instead we will create our own env_devargs structure that
will store these allowed_at timestamps. Currently it's just
a linked list (which is exactly how DPDK does it) - we could
make it more optimal with a hash table down the road, but this
code only executes when we are doing PCI enumeration so it is
not performance critical.
Fixes#1904.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3ee5d65ba90635b5a96b97dd0f4ab72a093fe8f7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7506
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
status code and type is inspected and reported
Fix issue #1893
Signed-off-by: Monica Kenguva <monica.kenguva@intel.com>
Change-Id: I6f181d8c9464182b23c658f4c268b900398fd751
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7567
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
