When loading a blob and parsing its metadata,
the array of pages was not updated.
Serialization was unaffected, since the current pages
array is unused there.
Behavior was working correctly for first page,
but did not for any blob with more than one page.
Unfortunetly blob_persist_zero_pages() never zeroed out
the pages, neither blob_persist_zero_pages_cpl()
released the md pages.
Resulting in md pages being claimed even after blobs
deletion.
This patch now fills out the active pages array with
the appropriate page numbers from metadata.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6ff1f4fe95684119d283c2471fdbbea464da8151
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4504
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
By design the opts for each implementation
can not match spdk_sock_impl_opts.
During get_opts for specific implementation
only used fields are filled.
Yet iterating over all spdk_sock_impl_opts fields
would yeild garbage values for unset fields.
This is the case right now when doing save_config RPC
with uring enabled. A garbe value for enable_zerocopy_send
is returned.
sock.c:829:62: runtime error: load of value 165, which is not a valid value for type '_Bool'
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie0512a7dffc36c8ff89256d08f8a2f4fefcf9e83
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4699
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
There is no good reason to track every single I/O
to the module and especially not at INFO level behind
a log flag.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I16a772ae4d49d3c1963ca223ef0bc2068b405988
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4713
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Especially SPDK_INFOLOG() should not call spdk_log_get_flag() function,
instead rely on the log flag structure.
This caused performance degradation in places that used SPDK_INFOLOG
too extensively.
Due to nature of the macros, in the meantime new debug log in
iscsi was improperly named. This wasn't caught because of the
macros reliance on spdk_log_get_flag(), where if name wasn't
registered - no log was printed and no compilation occurred.
Going back to using the structures, gives immediate feedback
that there is no SPDK_LOG_ISCSI log flag.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I262eadb5aee29caa2a5cd719c82ca4963ea24576
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4712
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is a drop-in replacement of spdk_bdev_part_base_construct() by
spdk_bdev_part_base_construct_ext().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0c719683b5a9cd6dffce057552982d8e44871ab1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4580
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Use spdk_bdev_part_base_construct_ext() to pass bdev_name and
remove the spdk_bdev_get_by_name() call. Remove the created configuration
only if non-zero return code other than -ENODEV is returned.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ieb5ee5d7e1ccc984df1e84205be18c7b93799bba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4579
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Add an new API spdk_bdev_part_base_construct_ext() to pass not bdev but
bdev_name to fix the race condition due to the time gap between
spdk_bdev_get_by_name() and spdk_bdev_open(). A pointer to a bdev is
valid only while the bdev is opened.
In the new API, spdk_bdev_get_by_name() is included in
spdk_bdev_part_base_construct_ext() and the caller has to know if
the bdev exists or not. Hence spdk_bdev_part_base_construct_ext()
returns return code and returns the created part object by the double
pointer.
Another critical change is that base is just freed if spdk_bdev_open_ext()
failed with -ENODEV. The reason is that if we call spdk_bdev_part_base_free()
for that case, the configuration is removed by the registered callback
and so bdev_examine() will not work.
The following patches will replace spdk_bdev_part_base_construct()
by spdk_bdev_part_base_construct_ext() for the corresponding bdev
modules.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2db027a159559c403cdfbd71800afba590b0f328
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is just a drop in replacement of spdk_bdev_open().
Hold the passed remove_cb in struct spdk_bdev_part_base, and use
it in the new callback function bdev_part_base_event_cb. The resize
event is not supported for now.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I51c251f04bda13bd6712417010648717f7bf793f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4572
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
bdev_examine_bdev is not a public SPDK API but a JSON RPC method.
Hence move the description from the bdev section to the RPC section.
Additionally, clarify auto_examine is disabled by setting bdev_auto_examine
of the RPC bdev_set_options to false.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6de7db9769a20ad8435292a6fb302f102ef5d68d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4646
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch removes the call of spdk_bdev_get_by_name() from
create_compress_bdev() by calling spdk_bdev_open_ext() and then passing
bdev descriptor to _prepare_for_load_init().
vbdev_init_reduce() returns the return code of spdk_bdev_open_ext()
directly if it is error to process the ENODEV case correctly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie80ce4104ceaa5726db976e33cd35352d5c91703
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4571
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Previously bdev was closed after reduce initialization and was re-opened
before bdev claim.
This patch series will fix the race condition due to the fact that
bdev pointer is valid only while bdev is opened.
Hence keeping bdev open from reduce initialization to bdev claim
is better.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I00914db0aef8547c0826061bb0e500735b0b97a1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4567
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For example:
Got JSON-RPC error response
response:
{
"code": -32602,
"message": "Invalid transport type 'rdma'\n"
}
The \n here is redundant.
Change-Id: I30a22f93f2be2550fdbe2af2d90eaa1c381dc7ae
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4655
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This will disconnect all connections to a subsystem from a given
host identified by HOSTNQN.
Change-Id: Ibc9cea1f08a58a05dbac3a0bb47df8d8a58e7c10
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4556
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
There is nothing left here, so remove it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib947d42bc577dbebb4650b1be885e05a80f8f8cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4541
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
This macro was used in only single place and served no real
purpose.
spdk_log_dump() is more commonly used directly, so use it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Idea720cdee767c7c6cdc30db10003ef42b88c4a3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4540
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Mellanox Build Bot
There is no need to keep the log level in internal header.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0f732af4a18fd16d9c5b26efc051f122a117a9e2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4539
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Log flags could also report on SPDK_LOG_INFO level by using
SPDK_INFOLOG() macro. Yet this did not result in additional
log due to check for debug build.
This patch allows release builds to use that flag.
Meanwhile the -L option besides turning on particular log flag
changes print log level to SPDK_LOG_DEBUG.
Applied changes to serveral applications to follow the
behaviour of event framework.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib0d6cce33263c350d6d83300d60e7d15bdfe4b64
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4557
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
vbdev_delay_register() gets bdev name instead of bdev pointer as a
parameter, and open the corresponding base bdev first using
spdk_bdev_open_ext().
The purpose is to fix the race condition due to the time gap
between spdk_bdev_get_by_name() and spdk_bdev_open(). A bdev pointer
is valid only while the bdev is opened.
Resize event is not supported for now.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib9f43965bcf28f8ca0d16fd2c73219253805f254
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4565
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
vbdev_passthru_register() gets bdev name instead of bdev pointer
as a parameter, and open the corresponding base bdev first using
spdk_bdev_open_ext().
The purpose is to fix the race condition due to the time gap
between spdk_bdev_get_by_name() and spdk_bdev_open(). A bdev pointer
is valid only while the bdev is opened.
Resize event is not supported for now.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib8894cf857ef814f6721e4244237c8156f147426
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4564
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
spdk_bdev_get_by_name() is included in spdk_bdev_open_ext() and
when we use spdk_bdev_open_ext() for some bdev modules, for example,
pass-through bdev module, the case that bdev is not found in
spdk_bdev_open_ext() is normal.
Hence change the corresponding ERRLOG to NOTICELOG.
Besides, change the wording to "Currently unable to find bdev with name"
to indicate there is a chance that it will be there later.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I055bce51d1aa7f005efab28359746f17858dfe48
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4589
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
For example, for pass-through bdev modules, it is acceptable that
bdev whose name matches is not found when creating a pass-through
bdev.
The next patch will replace spdk_bdev_open() by spdk_bdev_open_ext()
for pass-through bdev module.
spdk_bdev_open_ext() includes spdk_bdev_get_by_name(). Pass-through
bdev module has to know if spdk_bdev_get_by_name() returned NULL
in spdk_bdev_open_ext().
Hence change spdk_bdev_open_ext() to return -ENODEV if spdk_bdev_get_by_name()
returned NULL.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I525a7118481586161bd0e8c07b96a887c0a04210
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4575
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Open a bdev whose name matches bdev_name first in spdk_vhost_blk_construct()
to avoid using spdk_bdev_get_by_name() to fix the race condition
due to the time gap between spdk_bdev_get_by_name() and spdk_bdev_open_ext().
A pointer to a bdev is valid only while the bdev is opened.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I99fedd696aa44bb46c1fcc4f49ca37069f7adfef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4502
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add an new API spdk_nvmf_subsystem_add_ns_ext() to pass not bdev but
bdev_name to fix the race condition due to the time gap between
spdk_bdev_get_by_name() and spdk_bdev_open(). A pointer to a bdev is
valid only while the bdev is opened.
spdk_bdev_open() has been replaced by spdk_bdev_open_ext() but the
issue still existed.
Update the corresponding unit tests accordingly.
Then replace the internal of spdk_nvmf_subsystem_add_ns() by
spdk_nvmf_subsystem_add_ns_ext() call.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifcaa2121129ef22d5e61c9a8f7c640ff37a64485
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4485
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
There are operations on nvmf which depends on proper values of qpair
attributes which can be intepreted as internal state.
e.g.
nvmf_ctrlr_process_fabrics_cmd execution relies on qpair->ctrlr
spdk_nvmf_qpair_disconnect relies on qpair->disconnect_started
As poll group add is like a registration of qpair into nvmf lets try
to initialize it to a defined and expected state.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I10494e7f70ff58ec5460cab1de8a52fd21cc4a48
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4479
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This change will allow external libs to register
SPDK log flags and use log macros by external libs.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I03ef088580bbf23bd22ad1a36817ca84c5ba8edd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3954
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch removes the string from register component.
Removed are all instances in libs or hardcoded in apps.
Starting with this patch literal passed to register,
serves as name for the flag.
All instances of SPDK_LOG_* were replaced with just *
in lowercase.
No actual name change for flags occur in this patch.
Affected are SPDK_LOG_REGISTER_COMPONENT() and
SPDK_*LOG() macros.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I002b232fde57ecf9c6777726b181fc0341f1bb17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mellanox Build Bot
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI
Couple log flags did not follow previous scheme of naming
so rename it.
This will simplify next patch that replaces all the literals
with names provided for the flags. Avoiding accidental
changes in log flag names.
SPDK_NOTIFY_RPC -> SPDK_LOG_NOTIFY_RPC
SPDK_LOG_CRYPTO -> SPDK_LOG_VBDEV_CRYPTO
SPDK_TRACE_VBDEV_OCF_VOLUME -> SPDK_LOG_VBDEV_OCF_VOLUME
SPDK_LOG_JSON -> SPDK_LOG_JSON_UTIL
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I00cb0a7994d8aaf28b03828b93b1dbb18215089f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4498
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This makes it more in line with other flags.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I2d2f720a6cf1a6aa0cf3ddc0691c7ffc0adc43fd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4538
Reviewed-by: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This makes it more in line with other flags.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic44821318444dc2ea30771aba06201572ca7ef12
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4537
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Patch further out the series will be removing "SPDK_LOG_"
portion of the literal. They will be made much shorter and
have potential to conflict with some other structures.
Add SPDK_LOG to the structure itself which will make sure
there is no conflict as is now.
For couple patches the structures will have longer than nessecary
names.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If281fa8b7ae027500b980766d90513f8c3ee187a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4494
Reviewed-by: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In high read IO pressure, there is a loop call of process_completed_read_subtask_list()
while calling spdk_iscsi_task_response(), this cause 'primary->bytes_completed'
changes, in turn cause multiple calls of 'spdk_iscsi_task_put(primary)', assertion
failes in spdk_scsi_task_put().
Signed-off-by: Sochin Jiang <jiangxiaoqing.sochin@bytedance.com>
Change-Id: I41d02d318f827f3bb3ad9ba3a06e080b5113cd40
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4083
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
a pause
This now also takes a lock instead of requiring a pause of the whole
subsystem.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I7de174f3f56d2b3767e723387c4f2257107d8b19
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4581
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The list of allowed hosts is only checked during handling of CONNECT
commands - not in the main I/O path. Protect that list with a mutex
instead of requiring a full pause of the subsystem to allow
dynamic management of the allowed hosts without impacting any
active I/O.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I3f7e87cc1fa6de200c422928c07153fc60fab28c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4555
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The WQ has not been provided a PASID so virtual addressing is not
supported. This worked previously because all test set ups had IOVA=VA.
Change-Id: I6b08714e246a0dc8d5bc0f31efa4b90b601c5b4c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4558
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Ignore .gitreview configuration file. It must be placed
in the cloned repo directory in order for git-review
to use it when submitting / fetching changes.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I5f027c3208bafcfd16ac980b42a314a2914f5036
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4547
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
