To allow SO_MINOR updates on LTS for the whole year it is supported,
the major version for all components needs to be increased.
This is to prevent scenario where two versions exists with matching
versions, but conflicting ABI.
Ex. Next SPDK release adds an API call increasing the minor version,
then LTS needs just a subset of those additions.
Increasing major so version after LTS, allows the future releases
to update versions as needed. Yet allowing LTS to increase minor
version separately.
Disabled test for increasing SO version without ABI change, as
that is goal of this patch. This check shall be removed with SPDK 22.05
release.
This patch:
- increases SO_VER by 1 for all components
- resets SO_MINOR to 0 for all components
- removes suppressions for ABI tests
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id1a5358882dc496faa5b0b5c9a63b326c378c551
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11361
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add/modify tpoints around io_device name in lib/bdev/bdev.c
and lib/thread/thread.c.
Deleted double spaces in commets of trace_defs.h.
Change-Id: I0e2f5118e68b1b329a422bde3400fd2273e7387e
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10687
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
The originally detected problem is that SPDK NVMf target fails command
with invalid opcode with status code INTERNAL_DEVICE_ERROR instead of
INVALID_OPCODE. All unknown commands on IO queue are passed to
underlying block device layer as NVME_IO type. It is not checked if
this type of commands is supported and, when command fails,
INTERNAL_DEVICE_ERROR is set as status code. If command fails on
submission, status code is set to INVALID_OPCODE which is more
relevant.
This patch adds check if command type is supported to
bdev_nvme_*_passthru functions. If not supported, it is failed with
ENOTSUP.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I4d7f7639da17dd3b1dc3eee7eb1b4a4f876117a2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8567
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
spdk_bdev_io_get_nvme_status() does not follow NVMe abort command
about return values.
NVMe abort command sets completion status to SUCCESS both for success and
failure cases and differentiates only the bit 0 of cdw0.
lib/nvmf do not use spdk_bdev_io_get_nvme_status() but checks only
success or failure at completion.
So there is no issue now but let spdk_bdev_io_get_nvme_status()
follow NVMe abort command. In future, the user of spdk_bdev_abort()
may use spdk_bdev_io_get_nvme_status().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic4a08056bd8a1aee4c400f72ef5de7c68e23990b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9977
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
In the bdev-zone API, there are a few functions that takes a zone_id:
spdk_bdev_get_zone_info(), spdk_bdev_zone_management(), and the
spdk_bdev_zone_append() functions.
The way a zoned application is usually written is that it starts off
by getting the zone report for all zones (zone_id will be sent in as 0),
and then the application will keep the whole zone report in memory.
Therefore, an application usually have access to the zone_id/zslba for
all zones. However, there are cases, e.g. when getting an error on write,
where the completion callback will only have the lba of the write that
failed.
Add a helper function that can be used to get the zone_id/slba for a
given lba. Having this helper in bdev-zone will avoid SPDK applications
needing to provide their own implementation for this.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I978335f87f7d49bc33aed81afcaa6d9f0af8a1e4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10180
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Adds context to currently existing traces inside bdev.c file.
These are going to be used later to match with traces from
nvmf layer to enable io tracing.
Change-Id: I599a60412f39144cdd306315a184b2000a61286e
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9497
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
This is to help with binding trace objects together and
for the convenience (all trace definitions are in one place
instad of being scattered accross multiple files).
Change-Id: Ib15bc9c2eeee9c4d0816bcee509ab69f3f558e19
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9574
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Callback for bdev modules is called 'module_fini',
meanwhile after its execution bdev modules were to call
'spdk_bdev_module_finish_done()'.
This function carries incorrect name, so it was deprecated
and replaced with 'spdk_bdev_module_fini_done()'.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9a12dff746ea8b4b1570a3794470f7b24e29003e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9148
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
fini_start() is called for each bdev module before
iterating over all unclaimed bdevs to unregister them.
This allows bdev modules to behave differently during
each such unregister. Ex. unloading lvol store when
all lvol bdevs on it are unregistered.
Another use of this callback is to unclaim all bdevs
that can be at that point. Especially ones that will
not receive callback due to no bdev registered.
Ex. offline raid bdev, when some underlying bdevs are missing.
fini_start() being synchronous does not help in cases
where to release claim on the bdev, an asynchronous operation
is required. Ex. lvol store with no bdevs present, requires
async lvs unload to be called.
This patch adds async_fini_start flag for the bdev modules,
to be used when async fini_start is required. When done,
bdev module has to call spdk_bdev_module_finish_start_done().
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I63438b325d4cc53fd236bf9ff143abf6bdd81c49
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9094
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We had not held mutex while removing bdev name or alias from bdev
name tree for most cases. Fix these in this patch.
spdk_bdev_unregister() already holds g_bdev_mgr.mutex when removing
name, and so we do not need to change it.
spdk_bdev_close() had not held g_bdev_mgr.mutex. What we want to lock
is only when removing name from name tree, that is, calling
bdev_name_del() in bdev_unregister_unsafe(). However, we need to
keep hierarchical lock ordering. Hence get and free g_bdev_mgr.mutex
outside of bdev->internal.mutex.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4e2c8604e27c8603725efa9bc0bee2013eccb2ac
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8527
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We had not held mutex when adding bdev name to global bdev name tree
in bdev_name_add(). Fix these in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I33813638f11da85263ec0c8849e566d247a45d43
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8524
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
If the specified name already exists in the global bdev name tree,
RB_INSERT() returns a pointer to it. Hence we do not have to call
bdev_get_by_name() when using bdev_name_add().
Hence update bdev_name_add() to return -EEXIST if RB_INSERT() returns
a non-NULL pointer, and then remove the bdev_get_by_name() calls.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2d4554ef7e5286270417def64b638b803eecfca2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8573
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_bdev_register() and spdk_bdev_add_alias() had not held mutex when
adding bdev name or alias to global bdev name tree. This bug caused unexpected
error when traversing global bdev name tree.
The next patch will fix the bug. This patch is a preparation for the fix.
spdk_bdev_get_by_name() had not held mutex while traversing bdev
name tree. The major callers to spdk_bdev_get_by_name() had held mutex
when calling it. However, this was not clear.
Factor out the internal of spdk_bdev_get_by_name() into a helper
function bdev_get_by_name() and then change spdk_bdev_get_by_name()
to lock and unlock when calling bdev_get_by_name().
Then replace spdk_bdev_get_by_name() call in spdk_bdev_alias_add() and
bdev_register() by bdev_get_by_name() call.
spdk_bdev_get_by_name() call in spdk_bdev_examine() is not changed.
This is called only from JSON RPC and not related with the bug. So
we want to fix only unlocked access to global bdev name tree.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I25f07694e569eec10dba6c3c8543f6ce77412fe8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8523
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Now that the trace library can handle multiple arguments, there's no
point in passing 0 for tracepoints that don't have any arguments. This
patch removes all such instances. It allows us to to verify that
`spdk_trace_record()` was issued with the exact number of arguments as
specified in the definition of the tracepoint.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Idbdb6f5111bd6175e145a12c1f0c095b62d744a9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8125
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Replaced calls to `spdk_trace_record_tsc(spdk_get_ticks(), ...)` with
`spdk_trace_record(...)`, which does the same thing but is more consise.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib96e0bc0225490dadf857e1ddd2a3ecbf71e98c8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8444
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Thread is private data of spdk_io_channel, bdev should use
spdk_io_channel_get_thread() to access it. This prepares for the upcoming
change to make the definition of struct spdk_io_channel private.
Change-Id: I643c8d677e22f6d8dde2faf91bb2711d3f5d81b8
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8426
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
The common bdev layer will split large WRITE ZEROES ranges into
multiple children requests based on the backend device's setting,
it will try to split up to 8 children requests at a time to avoid
flood requests.
Also add UT to cover different cases.
Change-Id: Id9505fbe1c297412ef97b1f73587b22bc43f770e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7875
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The arguments of a tracepoint are formatted when they're printed now, so
there's no need to append ":" or pad it with spaces.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I74f5568f1982dacc079e3b80bd19a9cd740b48ce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7955
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Adding iov to the spdk_bdev_zcopy_start function enable spdk_bdev_zcopy_start to
be used by transport layers as the iov is owned by the transport command
Signed-off-by: matthewb <matthew.burbridge@hpe.com>
Change-Id: I6d2be7f49566048bf25b7711ada8d2fb49fea6ee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6816
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
ZCOPY emulation is not required. Modules can check if the bdev module
supports ZCOPY. If not supported the module uses the existing
READ and WRITE operations.
Signed-off-by: matthewb <matthew.burbridge@hpe.com>
Change-Id: Idac0a4d27a79a6c7e567c420e15637e826c347c8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6815
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Use the macros for red black tree provided by Free BSD to speed up bdev
name lookup in spdk_bdev_get_by_name().
In the bdev_multi_allocation test, we can get 3x ~ 5x speed up when
creating multiple bdevs for various bdev nums.
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: I49a2fbcccf06d4c36cbd445ce59e0b0dd4ada31d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7837
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Clean up spdk_bdev_register() to facilitate the upcoming patch which
uses RB tree to speed up bdev name lookup.
* move TAILQ_INSERT from bdev_start() into bdev_init();
* rename bdev_init() to bdev_register() and rename bdev_start_finished()
to bdev_register_finished();
* inline bdev_start() into spdk_bdev_register().
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: Idbfc800472bc8c6f9b615046e082772e9f6026e3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8043
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
This API was removed previously, so remove remaining
references in map file and unit tests.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iba2f6a5f5ba590d3996dc133c8181083a33d7405
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7963
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Also for the purpose to avoid a burst of children unmap request,
we will submit at most up to 8 children request at a time for
a big UNMAP command.
Change-Id: Iaf0f18b07517e0a8f84dc04e8c93b95691a1a43c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7518
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Both UNMAP and R/W will share the some logic to process the submission,
so combine them to a helper function first.
Change-Id: Ia4f234c6a58f078d3e9f88cacaf1510a17f07acc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7606
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will help us to add unmap split function, also
remove bdev_io_type_can_split() because we changed
to use swith(io_type) ... case now.
Change-Id: I449d6a9f5bf2d0b43dd124bbfc9e1ca2afddc15a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7516
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
(Note: this patch was previously applied as b32cfc46 and then reverted
as 63642bef.)
Today the in-guest nvme device shows physical_block_size=512 even though
the backend iSCSI bdev supports physical_block_size=4K
iSCSI targets exposes physical block size using
logical_block_per_physical_block_exponent in READ_CAPACITY_16
NPWG is one of the way to let Linux nvme driver set
physical_block_size of the nvme block device.
This patch adds spdk_bdev.phys_blocklen which is updated if the iSCSI
backend exposes physical_block_size.
Later phys_blocklen is used in nvmf to set NPWG and NAWUPF to report
back during NS identity.
Linux driver uses min(nawupf, npwg) to set physical_block_size.
Similarly in scsi_bdev fill lbppbe in READ_CAP16 response
based on spdk_bdev.phys_blocklen.
Fixes#1884
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: I0b6c81f1937e346d448f49c927eda8c79d2d75c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7739
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This reverts commit b32cfc467b.
This commit fails the ABI checks and only got through because the checks
were disabled until 21.04 hit.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Id26b8f8ba551193d99b1ccbd31b35378b4095a20
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7731
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Today the in-guest nvme device shows physical_block_size=512 even though
the backend iSCSI bdev supports physical_block_size=4K
iSCSI targets exposes physical block size using
logical_block_per_physical_block_exponent in READ_CAPACITY_16
NPWG is one of the way to let Linux nvme driver set
physical_block_size of the nvme block device.
This patch adds spdk_bdev.phys_blocklen which is updated if the iSCSI
backend exposes physical_block_size.
Later phys_blocklen is used in nvmf to set NPWG and NAWUPF to report
back during NS identity.
Linux driver uses min(nawupf, npwg) to set physical_block_size.
Similarly in scsi_bdev fill lbppbe in READ_CAP16 response
based on spdk_bdev.phys_blocklen.
Fixes#1884
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: I0b6c81f1937e346d448f49c927eda8c79d2d75cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7310
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There are three modules implementing the bdev-zone API:
bdev_nvme, bdev_ocssd, and vbdev_zone_block.
For all three modules, the number of zones can be calculated using:
block_count / zone_size.
To avoid this calculation being performed everywhere, create a helper
function in bdev_zone.h, together with the other zone APIs, such that
a user can easily get the number of zones.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I2967b15a604ab8bf4420588e7510b9820762f925
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7451
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add support in bdev_zone.h for getting the maximum zone append data
transfer size.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I61203e64d51601232c6578a090fa52975364c1f3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6910
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The NVMe Zoned Namespace Command Set Specification has, in addition to a
Max Open Resources limit, a Max Active Resources limit.
An active resource is defined as zone being in zone state implicit open,
explicit open, or closed.
Create a function spdk_bdev_get_max_active_zones() in the generic SPDK
zone layer, so that this limit can be exposed to the user.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I6f61fc45e1dc38689dc54d5649c35fa9b91dbdfc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6908
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_bdev_io_complete_nvme_status() had set the bdev_io status to
NVME_ERROR even if it is aborted, i.e, sc is ABORTED_BY_REQUEST.
Fix it to ABORTED, and verify the fix by unit tests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6b22547105a6d7986747053f93875854336959b3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6884
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
spdk_vbdev_register() was deprecated in SPDK 19.04.
config_text field in spdk_bdev_module was deprecated in SPDK 20.10.
spdk_bdev_part_base_construct() was deprecated in SPDK 20.10.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib795ccdf61154c168032ccf8b81ea77e5e663851
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6628
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
For correct behaviour, pthread_mutex should not be locked after it has
been destroyed.
g_bdev_mgr.mutex is statically initialized. It is destroyed in
bdev_mgr_unregister_cb, but not re-initialized in spdk_bdev_initialize.
Repeated calls to initialize/unregister occur during unit tests.
Remove the destroy from bdev_mgr_unregister_cb, which seems
the simplest way of resolving the issue.
The sequence: spdk_put_io_channel(), spdk_bdev_close(),
spdk_bdev_unregister() occurs during unit tests.
spdk_bdev_unregister() destroys internal.mutex which is then
locked by a call to bdev_channel_destroy() resulting from the
earlier spdk_put_io_channel(). Move the destroy and the free of
internal.qos into bdev_destroy_cb so that they don't occur until
all of the channels have been released. Remove the no longer
required bdev_fini.
Repeat calls to spdk_bdev_unregister that occur after an unregister has
completed will lock internal.mutex which has been destroyed by the
previous unregister. This occurs during unit tests. Defer locking
internal.mutex until after the internal.status has been checked for
SPDK_BDEV_STATUS_REMOVING. This is the only place where
internal.status is set to removing and g_bdev_mgr.mutex alone is
sufficient to ensure atomicity here.
Tested with a pthreads library that contains debugging code to
check the mutex state and a modified version of bdev_io_types_test
to call get_io_channel on a different thread.
Suggested-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I81cc46a1b8a766700253829b19cc86c7f0eb79f2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6217
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
To allow SO_MINOR updates on LTS for the whole year it is supported,
the major version for all components needs to be increased.
This is to prevent scenario where two versions exists with matching
versions, but conflicting ABI.
Ex. Next SPDK release adds an API call increasing the minor version,
then LTS needs just a subset of those additions.
Increasing major so version after LTS, allows the quarterly releases
to update versions as needed. Yet allowing LTS to increase minor
version separately.
Disabled test for increasing SO version without ABI change, as
that is goal of this patch. This check shall be removed with SPDK 21.04
release.
This patch:
- increases SO_VER by 1 for all components
- resets SO_MINOR to 0 for all components
- removes suppressions for ABI tests
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I44d01154430a074103bd21c7084f44932e81fe72
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6167
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This helps user to locate whether bdev_io fails in
spdk bdev layer or inside Linux AIO.
SPDK_BDEV_IO_STATUS_AIO_ERROR indicates bdev_io fails
due to Linux AIO or its lower layer's failure.
New functions spdk_bdev_io_complete_aio_status and
spdk_bdev_io_get_aio_status can be used to report out
the errno from Linux AIO.
Change-Id: I32640e4a0459cca057278c02ea5a7522f3408a02
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5690
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
A small improvement in blockcnt change.
If size == bdev->blockcnt just return.
Change-Id: I507a3e5d5fa0f3f17383afa08c47c0bda48be52c
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5922
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
"bdev_register" notification was sent right when register
happened, which was misleading for any listener.
Action on the registered bdev might not have been possible
when examine took longer time.
Order of bdev_register notifications in json_config test
was modified, because they are being sent out as pollers
for the spdk_bdev_wait_for_examine() are being processed.
This is only because pollers are inserted at the tail,
and processed from the tail as well.
Order of notifications should not matter, as long as bdevs
are ready for use.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I45b769f184b386df2daa4152ee766636ef0668ad
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5213
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since user/orchestration has no chance to call
bdev_wait_for_examine when loading json configuration,
this RPC is now always built into bdev subsystem json.
This behaviour was already there for SPDK_RPC_STARTUP,
see bdev_module_action_complete().
Yet it did not apply to SPDK_RPC_RUNTIME RPCs, as the
bdev module initialization was already complete.
Making sure all SPDK applications finish their startup
when all bdevs are ready to be used. See issue below:
Fixes#1675
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0f60f56932da020a15deeef09a5a1544f3a1bae6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5481
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add spdk_bdev_wait_for_examine() API to be called
in order to report when examine on all registered bdevs finished.
It will be built in to most bdev modules RPC.
New RPC added to allow
- building it into bdev submodule
- user/orchestration to verify examination status manually
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I27db3ae42eea3e692faeea4c2a01d04586bff438
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5480
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch moves out check for all module actions to finish.
It will be used further down in the series for new RPC and as
new bdev API.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I24ff40de70f5ed1c8582e60dc23146d7bf9380fd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5212
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
