Look for 'vfio_user' in SPDK_LIB_FILES to determine
whether the target application actually needs to be
rebuilt.
Fixes issue #1930.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If3f699c91972e20dc4520e25c655ed11f6843be0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7826
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
At least on some Ubuntu distributions, default
vfio-user install puts libs in usr/local/lib instead
of usr/local/lib64.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib312d8ca9b4ce9e858a9a9e76525fc8afd48ced5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7825
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: <dongx.yi@intel.com>
This helps in next patch in series where multiple
completions will be executing.
UT is adjusted since one additional poll is required.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id72377ddef91e40cdbc2bdea6f33c23309b0ca3d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7642
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
During snapshot creation the original blob becomes
a thin provisioned blob that will only the diff of data after
snapshot creation.
Despite the comment in the UT the number of polls before issuing
blob write was hitting blob BEFORE it swapped with new one.
Issuing I/O during this period shall check for io freeze
before checking cluster allocation.
Otherwise bs_io_unit_is_allocated() hits assert for thin
provisioned blob. This is because cluster map of blob is
empty, but properties have not been updated yet.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I742e1a50b14d456ae1e6de13b5111caec3e8322c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7641
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also for the purpose to avoid a burst of children unmap request,
we will submit at most up to 8 children request at a time for
a big UNMAP command.
Change-Id: Iaf0f18b07517e0a8f84dc04e8c93b95691a1a43c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7518
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Both UNMAP and R/W will share the some logic to process the submission,
so combine them to a helper function first.
Change-Id: Ia4f234c6a58f078d3e9f88cacaf1510a17f07acc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7606
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The changes in the nvmf_create_transport show
how this command parser work. And there have
two benefit for this changed.
1. Simplify the definition of rpc method. no need add
so many args anymore. Also it retains its original
functions, so we can also check the input args.
2. Make the rpc call more versatile, for example.
when user extend the subparsers(add new args
into subparsers), they can pass some private args
into the rpc method by command parser.
Signed-off-by: jiaqizho <jiaqi.zhou@intel.com>
Change-Id: Iaf916e3454f23715cf9216794bb80c65b2b4603f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6652
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Addressing review comment from 6cebe9d0.
Minor optimisation to cache result of spdk_u32log2() into local variable
instead of calling it multiple times.
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: I2fd6afd1e3ee461662de3f9d278958664224e106
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7806
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: sunshihao <sunshihao@huawei.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
ctrlr_discovery.c doesn't need this #include.
Including it causes bdev_module.h types to be
emitted to the debug symbols at least with some
compilers, which can result in unwanted abidiff
errors.
The unit tests do need it, so just include it
there instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iad28f9778ce08b11b52325658583ae9032295f3a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7813
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The library itself doesn't need it. The unit tests
do need it, so just include it there.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9aefd303ae12928d45141029436509f185105bd3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7812
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This module only requires the spdk_bdev_module
APIs, so use this #define to avoid having to
bump so version when spdk_bdev is modified.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I292c38e60cbf21d0d5a6583cb2a2b097c524f3d1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7811
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
- Use consistent cache line size units in KiB across RPC calls
and config files. The KiB units are much easier to use then
the bytes units and are more human readable.
- Properly handle cache start when cache line size is incorrect.
- Add test to check if cache line size value is reported correctly.
- Add cache line size info to JSON RPC documentation.
Fixes#1858
Signed-off-by: Rafal Stefanowski <rafal.stefanowski@intel.com>
Change-Id: Iec9ede85f6884b64605d2d112947b3f175cbd938
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7614
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Older version wasn't providing full support for PMR setup, this one
does.
Rewrite get-pmr such that it supports CMB/PMR sizes greater than 4GB.
Also, since CMB and PMR can coexist in newer versions of qemu try to
detect both under single device.
E.g.:
nvme0:0000:00:04.0:64-bit:prefetchable:0x700000000:0x707ffffff:0x08000000:cmb
nvme0:0000:00:04.0:64-bit:prefetchable:0x400000000:0x5ffffffff:0x200000000:pmr
nvme1:0000:00:05.0:64-bit:prefetchable:0x708000000:0x70fffffff:0x08000000:cmb
nvme2:0000:00:06.0:64-bit:prefetchable:0x600000000:0x6ffffffff:0x100000000:cmb
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ic159f5c12d3ef39db77617f7d64f825356c255a4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7539
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Recently, checked the spdk_io_device_unregister function,
it will have deferred free behaviour, and the io_device
will possibly be freed in put_io_channel function.
And this means that it is not safe to directly call:
spdk_io_device_unregister (io_device, NULL);
Then free io_device relately resource.
Because there will be channel to use the resources associated
with io_device. Then we will possibly cause a NULL pointer access.
I found this issue in bdev rbd module, and I think that the
same issue could happen in other modules. So it is better to put the
resource free function as the call back function.
Change-Id: Icc1f86d72b672faefb3b7f416030b818a8cf45ce
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7646
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Passing cpu_mask hints that match only single core were
usefull to prevent any accidents when doing round-robin
in case of 'static' scheduler.
In practice this is not required in case of 'static' scheduler,
the threads will be spread out over all reactors anyway.
This hinders other schedulers which try to respect the cpu_mask
hints, as they would not move the thread to any reactor.
Preventing bunching up less used threads on single reactor.
Drawback of this patch is that poll group names will not match
the cores they are on.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5fb308362dd045228ea9fcca24f988388854c054
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7028
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Normally, unless RTE_MALLOC_DEBUG is set, DPDK zeroes memory in rte_free().
If RTE_MALLOC_DEBUG rte_free() fills memory with poison pattern, but then
(and only then) the memory is zeroed in rte_zmalloc_socket(). Relying on
this behavior allows to avoid unnecessary memset() in spdk_zmalloc() path.
Signed-off-by: Robert Baldyga <robert.baldyga@intel.com>
Change-Id: If3efa4dd22f1568949c3fb529b604bd597ceb32f
Signed-off-by: Rafal Stefanowski <rafal.stefanowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6975
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We did not find this issue, because we always use seed = 0 to test.
Definitely, we need to assign the seed value.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I6bec1b6d61480cdd7c9e27578dcaf5de2f65cf44
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7716
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch fixes missing free of qpair_mask when a listener error
occurs in ctrlr_create.
Signed-off-by: Jonas Pfefferle <pepperjo@japf.ch>
Change-Id: I09162b86d8ac73bf9fc2006a08dcc0a955f222b3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7818
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Not just one with extra available info. Also remove the extra
read of the error register, not required.
fixes: #1927
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I28badb45d8cc8d16b72f7019bd2a2044998fc402
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7729
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Nvme-cli uses NVME_IOCTL_IO_CMDs for "io-passthru"
commands to cuse devices. This patch adds support
for that IOCTL.
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: I20e0ac91ba08fce91bc5da1f4a1e454058cdd1e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7741
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The nvme cuse IOCTLs are actually creating passthru commands
that can be either IO passthru commands or admin commands.
Renaming the routines to correctly reflect that should limit
the confusion when reading the code. Passthru commands that
are admin commands will go to the spdk_nvme_ctrlr_cmd_admin_raw
interface and passthru commands that are IO will be sent to the
spdk_nvme_ctrlr_cmd_io_raw interface.
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: I8d427fe8b5f503fdb2d193236c77d410d5b13886
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7740
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Nvme-cli uses BLKSSZGET so support needs to be added for
nvme cuse devices.
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: Ic8316713b2d017c8ff32a225efff6bcb95842799
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7708
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It is useful to have debug log information in the nvme_cuse
path when debugging IOCTls and flows.
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: Ifef1bb82c96438e2fcbb9ad2fafe3f3eb66bed51
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7707
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The purpose is to prepared for implement the async crc32 caculation
in the future patch.
Change-Id: Ia75f28154c49f08b527d48c63b9da79a6bdfede8
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7794
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The purpose is to prepared for implement the async crc32 caculation
in the future patch.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I49f84ea1966f0acdd6f5aeb7192896f91fd16dee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7793
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Purpose: We will also support the kernel idxd driver, so we do not
need export this feature in the module file.
Change-Id: I965e031497920f527962ba187bccd81de6977b8f
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7336
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There's no good reason to reduce the capacity by aligning it to the
number of optimal open zones. If such alignment is required by the
users of the zone block bdev, it should be done on their own layer.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ic8614a82715e9f064619aa8fdb75d1a0b851490c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7656
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6ad71a65244526e99a36920c630096cc9739d94d
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7809
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
--initial_zone_reset has to be done before fio creates its threads.
Since --zonemode=zbd only supports --create_serialize=1 (default),
this is possible.
Since this requires an I/O channel, and is called before threads
are created, follow the same pattern as spdk_fio_report_zones()
and simply initialize the thread early if this option is used.
Just like spdk_fio_report_zones(), thread cleanup has to be
called explicitly in case of error. (Since fio will only call
.cleanup() on threads that it has called .init() on.)
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I7d4dedce88309e4c6e5800ed3d56cd5ccb297551
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7726
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Implement callbacks needed for fio --zonemode=zbd, so that we can use fio
to exercise the bdev-zone layer in SPDK.
spdk_fio_report_zones() will be called before SPDK normally initializes
the threads.
spdk_fio_report_zones() simply initializes its spdk thread when called.
Threads not running against a zoned block device are not affected.
Each spdk thread is still destroyed after the fio run has completed,
as normal. If spdk_fio_report_zones() encounters an error, we have
to call spdk_fio_cleanup() so that the thread is added to the global
list of spdk threads that are cleaned up after main loop exit.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ia094eae8c9e44d8cfc66a5d9b7100f09f9db456a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7725
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk_fio_init_thread() assigns td->io_ops_data.
spdk_fio_init_thread() can return an error, but currently lacks error
handling code.
Add error handling code, and add an assertion that fio_thread
(td->io_ops_data) is assigned when spdk_fio_init_thread() didn't return
an error.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I8de7d59db0373599c90aa57fffa476c6707b6104
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7732
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is prepared for using the hardware offloading
engine in accel framework. And some fields in nvme_tcp_pdu
needs to be DMA addressable.
Change-Id: I75325e2cd7ff25fe938bea0ac9489a5027e3e0e9
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7770
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This is used to prepare using the accel framework to calculate
the crc32 because some fields in this structure needs to be allocated
in DMA addressable memory.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ib8def5596e60f4702709da647145c4e2b6d6848f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7767
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also add a macro to test a given log page ID.
Signed-off-by: Scott Peterson <scott.d.peterson@intel.com>
Change-Id: Id4d00f5c3d8af76b24ce010d6f922025a31312b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4115
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Note: a lot of the TCP and FC trace registers were
specifying '1' which means the arg type is a pointer,
but in reality it is always passing 0 for arg1. So
this patch just changes them to SPDK_TRACE_ARG_TYPE_INT.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I18d3cedd21e516f16cb2cd0a7f8c16670b1895d7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7763
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
We already pass the PDU as arg1, so by changing the
trace register descriptions, we can map the PDUs to
more readable IDs when running the spdk_trace app.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iad7106eeb0f5fe738f81da5ee174515d1cf4b6ce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7757
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This was accidentally moved to the wrong place as
part of some earlier iSCSI refactoring. This trace
record should be executed when we have finished
reading all of the data for any PDU, not just those
with immediate data.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib1d17e5e79ff220e9e9b3dd55e247e745bd58019
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7756
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
