When PRACT is set, if metadata size is 8 bytes, PI is stripped
(read) or inserted (write). Hence block size must not include
metadata size for extended LBA payload. This patch fixes the issue
by reducing metadata size from block size for this case.
On the other hand, When PRACT is set, if metadata size is larger
than 8 bytes, PI is passed (read) or replaced (write). So block
size is not necessary to change for this case.
The wrong block size didn't cause any visible issue but should be fixed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3351e3e3b7816f726752e85604cf557251d9870c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468018
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
g_metacfg_prchk_flags had been used to pring PRACT setting. This
didn't cause any issue but will lead to misread.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2f6c48b12ffa511afa2663d31dc9467cec980c9c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468017
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When PRACT is set, if metadata size is 8 bytes, PI is stripped
(read) or inserted (write). Hence block size must not include
metadata size for extended LBA payload. This patch fixes the issue
by reducing metadata size from block size for this case.
On the other hand, When PRACT is set, if metadata size is larger
than 8 bytes, PI is passed (read) or replaced (write). So block
size is not necessary to change for this case.
Signed-off-by: James Bergsten <jamesx.bergsten@intel.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I930c8a07519a4742c44240801b068fac2c4802a7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465708
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If PRACT is enabled, DIF context was not initialized. However it was
expected that PRACT is passed through DIF flags of the DIF context.
Hence PRACT was not set in NVMe command even if user set PRACT.
This patch fixes the issue by passing fio_qpair->io_flags instead
of dif_ctx->dif_flags.
Signed-off-by: James Bergsten <jamesx.bergsten@intel.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibcb74fc8f74f863d8b53d53484fdea66f4b5db8e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468016
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: James Bergsten <jrb@thebergstens.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
DIF context has to be initialized both for read and write I/O. However,
it had been initialized only for write I/O unintentionally after
refining error processing.
This patch fixes the issue.
Signed-off-by: James Bergsten <jamesx.bergsten@intel.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I363da40ddba186e52fd0dfce37cfb0dea325040d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468015
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: James Bergsten <jrb@thebergstens.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Arbitration Burst is valid for both round robin and weighted round robin
arbitration.
Change-Id: I0046194ef510bf255ac0527bc6b1d2dc0648b7cb
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466686
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
As SSDs with namespace management become more prevalant,
improve the identify utility to clarify things like the
total number of namespaces, and that data is printed out
for active namespaces only.
While here, change an active namespace check to an
assert. The print_namespace() function is only
called for active namespaces, so the check and print
was a bit confusing since it is never seen with SSDs
with inactive namespaces.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib21772579b94c5bcd1c518adb9d3341f4bf824f6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466818
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Some SSDs have inactive namespaces under normal circumstances,
especially those that support namespace management. Printing
error messages for these can be confusing to users. So just
remove that log message.
This removes the only usage of cdata in register_ns(). But
that cdata assignment was prefaced with a useful comment for
readers of this example code. So move that comment to
attach_cb() and restructure the code there a little bit.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I844e860ea0856d73ca535b6fcbd14279b96da4f1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466797
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tom Nabarro <tom.nabarro@intel.com>
perf is under the examples directory, but it's much more than
an example application and probably needs to be moved. We use
the libaio functionality extensively as part of benchmarking
and comparing the SPDK driver with the kernel driver. So we
need to keep this functionality.
This reverts commit b3d9ebae21.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifb9a1df919d32a98c328101029cc22e91915a976
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466795
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk_subsystem_init() no longer depends on spdk_event
or app.c part of the event framework.
This makes it possible to directly call subsystem
initialization, instead of invoking each used library.
Change-Id: I53550850d54e2397e2719fdeb559ed50aa81e704
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464177
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Users can use '-N' option to disable shutdown notification
for faster shutdown process.
Change-Id: I227dc4da3aa2f89d23f9b235e979cb6d3e25d635
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463950
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In case the previous controller already initialize the valid flag to TRUE.
Change-Id: I2896e5a8bd2bca6c0d67bba412b859e96f73d28f
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463487
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Only SPDK_NVME_FEAT_ARBITRATION feature bit was used.
Change-Id: Ic81ae6d63716d648aee13dc656ff4172deaba898
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463486
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Some drives can return get features with Arbitration feature ID successfully even
the drive can't support this feature, so we will not print this information for
the drives which can't support this feature.
Change-Id: Ife8a40120de7adcacd99d8513cfbcae1c15330dd
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463481
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
features are global variable and can be used for different controllers, e.g: there
are 2 controllers, the first one can support Arbitration feature, and the second
controller can't support Arbitration feature, the value from features[fid].valid
may contain the first drive's old value.
Change-Id: If020a0413a8a32e2be25ecccb5baf0a82d99371b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463480
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Original intention most likely was to compare nvme lib to
aio, but since then aio bdev was developed.
There should be no need to keep the support for AIO in
perf example app.
Change-Id: I716f2164b8eaef16db05b4fffa35393c7d916e0b
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461593
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Admin can enable user and add user to locking range.
Then the user can lock/unlock his range.
Change-Id: Ifc5a8cf5c6b5febeb59c86333981f0cf5b938500
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460891
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Previously we use getpass. But it looks like this
is obsolete, this patch is to fix this.
Change-Id: If3b667cea8e09aab170bfdb75b8d51e6855bb0b0
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461151
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
scanf format specification '%ld' expects type 'long int *' for 'd',
but parameter 2 had a different type 'uint64_t*'.
Changed to SCNu64 to reflect the type for range_length and range_start.
Change-Id: I1637b2f7e982a33b45bc765a3e16f7f1302d84cb
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462481
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch removes HAVE_URING CFLAG that was unused by
the perf.c
Change-Id: I8af85324db147989e0d3b9bd48faa9587c23be06
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461592
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This change attempts to address the Trello request to decode I/O errors in
NVMe hello_world example.
See https://trello.com/c/MzJJw7hM/2-decode-io-errors-in-nvme-helloworld-example
As part of this change, spdk_nvme_cpl_get_status_string was declared
in nvme.h, and spdk_nvme_qpair_print_command and
spdk_nvme_qpair_print_completion were renamed and added to nvme.h,
allowing all three to used "externally."
To test the failing paths, two compile time defines were added to force a
write or read error (bad LBA) respectively.
As the example does a read after write, if the write fails, the example fails.
Signed-off-by: James Bergsten <jamesx.bergsten@intel.com>
Change-Id: Ib94b4a02495eb40966e3f49517a5bdf64485538a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457076
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fio will allocate metadata buffers for each request, even the NVMe namespace
wasn't formatted to separate metadata, it's not an error to set the metadata
pointer to NVMe command, but still it's better to set it with real cases.
Change-Id: I1d29b6be65cfa6ba1c20d31906bcee5e8e2decf8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461349
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Print the type of metadata (extended LBA / separate buffer), even if
protection information is disabled. Changed the way protection
information's location is reported to be more accurate (previous
"Metadata Location" wasn't precise enough). Aligned all of the namespace
information fields, so that all values start from the same column.
Change-Id: Ia736db233cbcfdddcfd4a1437907e528f2b8947b
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459623
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
And also add spdk_sock_group_get_ctx function
Change-Id: I2a2a58b0588ff7d99d3538ea0a633a3b8c7a234b
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454538
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
VMD section with Enable flag set to true
need to be defined in config file to
enumerate devices behind VMD.
Change-Id: I8d1ef23768ee9c643c6b0f2f10eaf2c54eee8d71
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459767
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
VMD section with Enable flag set to true
need to be defined in config file to
enumerate devices behind VMD.
Change-Id: I814b0a34f87f9e063ded40e1dfb801a2c5fbe4af
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459766
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
free resources when error was triggered in nvme_manage
Change-Id: Ibdc020ffb5abd3d614fe85e54788b1818ef5af1e
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458342
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The ns_ctxs of worker_thread are organised as a list, so they
should be freed totally.
Change-Id: I348cacb12c338dfe0df100e1dc3de7b9f95bfda1
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458036
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In order for fio_plugin to compile a replacement is needed
for CLOCK_MONOTONIC_RAW, since FreeBSD does not support it.
In that case CLOCK_MONOTONIC is used.
Change-Id: I234ce4d932baf9c5399a46f9f4676315351e720c
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458072
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
New flag -V was added for VMD enabling.
Change-Id: I2d090a70b9d9b2bd996467a9b3da908f6eed1062
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457601
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Try to enumerate VMD devices in fio_plugin.
New flag enable_vmd was added to fio config.
Change-Id: I5546665719e4ef2b169d403db8bf0398e834dbc4
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456992
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
New flag -V was added for VMD enabling.
Change-Id: I0a31994acd5fd677366e8d5e49ad9a3583670c2c
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456967
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
New flag -V was added for VMD enabling.
Change-Id: Ie0feae1bdfce39ad246f57411d00587c6417d21d
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450926
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Data offset are intended to correspond to DATAO in NVMe/TCP and
Buffer Offset in iSCSI.
Previously for iSCSI, buffer offset had been merged to start block
address, but passing buffer offset separately from start block address
clarifies the logic more.
On the other hand, for NVMe/TCP, passing DATAO separately from start
block address will be critically important because DATAO will bave any
alignment and will be necessary to use for not only reference tag
but also guard computation.
This patch adds data_offset to struct spdk_dif_ctx and adds it to the
parameters of spdk_dif_ctx_init(). ref_tag_offset is also added to struct
spdk_dif_ctx and it is computed by dividing data_offset by data_block_size
and is used to compute reference tag.
The next patch will use this change when getting DIF context in SCSI.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id0e12ca9b1dc75d0589787520feb0c2ee0f844a5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457540
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_vmd_init() will attach all VMD devices that were
unbinded from system. There is not need to specify VMD
bdf in VMD public interface since it can be controlled
by setup.sh script.
Change-Id: Ifc45c32dc7e11b59429a41ddfdd596db30e27731
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456631
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
fio_thread->iocq allocated on line 403 was leaked when
fio finished its run.
Change-Id: I740dcaa1e0037283d099ddf4bc125cec57cfdbcc
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456623
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
