also remove out of support fedora31
Signed-off-by: wawryk <maciejx.wawryk@intel.com>
Change-Id: I2ec224a3fb3849eb62ba46a01aa74c62926174f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8461
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
If we continuous setup and teardown cuse session, It will teardown
uninitialized cuse session and cause segment fault, New function
cuse_session_create will do the session create operation and under
g_cuse_mtx to avoid this issue.
Signed-off-by: Weifeng Su <suweifeng1@huawei.com>
Change-Id: I2b32e81c0990ede00eea6d4ed3a7e44d534d4df3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8231
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Without hugepage allocation at runtime this is
no longer required. Additionally CI VMs now
have a lifespan of just 1 test run, so there's
no need to clear the cache anymore.
Saves us a few seconds on every run.
Change-Id: I12cb4095c37bd5d22d3b3fcbce4b5072118d3000
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2375
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: <tomasz.rochumski@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
check if the thread is moved to the main core after it becomes idle.
Change-Id: I3ee38ee16d755cc9dea5fa10d9f8ba42507408ff
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7853
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Use extended regexp to resolve any potential ambiguity with matching
on '('. This should fix the following failure as seen on the CI:
fatal: command line, '^SPDK_RPC_REGISTER\(': Unmatched ( or \(
Also, since errexit doesn't see failures inside the process
substitution make sure we return from the function with a proper $rc
in case git fails early on.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ia03095e9cc8cf11602dafb5bef28265abb485704
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8577
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When entering the if case to order the list, there is bug should be
fixed. The original code does not address this.
The way this happens is when there is a connection left in the socks_with_data list
between polls and there are enough new events detected that it would exceed the
maximal number of events. A connection is left on this list between polls if it isn't
fully drained via reads by the upper layer on each poll loop.
Currently, the maximal socket event num is 32. Then we did not hit this issue
in our normal test cases. But when you use NVMe-oF tcp target to test which is
described in #2105, there are more than 32 active sockets, and it exceeeds
the maximal num of events of polling (32), so we will trigger this issue.
Fixes issue #2015
Change-Id: I9384476fdba8826f5fe55a5d2594e3f4ed3832ba
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8541
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Faced the following warnings during the compilation:
accel_perf.c:222:17: warning: ‘argval’ may be used uninitialized in this function [-Wmaybe-uninitialized]
222 | g_crc32c_seed = argval;
And this patch can be used to fix this issue.
Change-Id: I84ee542d629ff5d9e6a2873c0035bea81b376150
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8538
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Chengqiang Meng <chengqiangx.meng@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wanghailiang <hailiangx.e.wang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
when running spdk_tgt -m 0x33,
the core id showed from refresh_cores_tab() is:
core
0
0
4
5
The correct should be:
0
1
4
5
This patch aims to fix this display error.
Change-Id: I2ac49d73de6dcf5bf10891b2299565c19cfaa686
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7856
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
We can add one or more ctrlrs to the existing detach context even
after polling started as long as spdk_nvme_detach_poll_async()
returns -EBUSY.
By relying on this update, add a global variable g_detach_ctx and
use it to aggregate multiple detachments.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I28dcfa41daf1fe2bbe76fac80e1bc2abc24751f7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8471
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This update will allow us to use spdk_nvme_detach_async() and
spdk_nvme_detach_poll_async() easier to aggregate multiple detachments.
Previously, we could do:
spdk_nvme_detach_async()
spdk_nvme_detach_async()
spdk_nvme_detach_async()
and then started doing spdk_nvme_detach_poll_async().
Hence aggregating multiple detachments is already supported.
After this patch, the following sequence is possible:
spdk_nvme_detach_async() = 0
spdk_nvme_detach_async() = 0
spdk_nvme_detach_async() = 0
spdk_nvme_detach_poll_async() = -EAGAIN
spdk_nvme_detach_async() = 0
spdk_nvme_detach_async() = 0
spdk_nvme_detach_poll_async() = -EAGAIN
spdk_nvme_detach_poll_async() = -EAGAIN
spdk_nvme_detach_poll_async() = -EAGAIN
spdk_nvme_detach_poll_async() = 0
The actual changes is to remove the variable polling_started from
struct spdk_nvme_detach_ctx because it is not necessary anymore.
Clarify this change via updating the header file and CHANGELOG.
Verify this change by unit test.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iebdf6c27c5304a2097b7084c315ccc99634ffa1e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8468
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add a new function spdk_nvme_detach_poll() to simplify a common
use case to continue polling until all detachments complete.
Then use the function for the common use case throughout.
Besides, usage by simple_copy application was not correct, and
fix it in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic14711cd8478bf221c0fe375301e77b395b37f26
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8509
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The function comment was referring to a non-existent caller; instead, expand
with a little more detail on the path taken for new QPs.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I42478194f3cfc18a6ff6c434964630ac42866f1d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8534
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Updates docs for spdk_top to refrect changes made to the bottom menu
and adds a section to explain help window.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: Iad3cf97ce0e06d9154b3b93e73c4c626f89a763e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6989
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Help window has proper explanations for each key used in spdk_top,
thus number of bottom menu entries can be reduced.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: Id8356cbf25a63931e2499fee245547a5dec3b7a0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6145
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Adds help pop-up window with descriptions for each menu entry.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: Ic622d30e24ba0b071254577c31829be235cdb0fc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6142
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
SC2268: Avoid x-prefix in comparisons as it no longer serves a purpose
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ica5ddfa8c39f34741c7344906abe802ff7451b1f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8505
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: <tomasz.rochumski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SC2251: This ! is not on a condition and skips errexit.
Use && exit 1 instead, or make sure $? is checked.
This is critical since our test suites heavily depend on errexit
to catch all abnormal conditions. Replace ! foo ... with a call to
NOT() wherever possible. For the test/ocf pieces, use [[ ]] instead
to define the condition for the existance of the ocf bdev.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ied3f99b9f1dc0594e4aef64fc21e51498f19ac23
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8504
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These are currently prone to false-positives especially in terms of
scoping. Consider the following:
foo() {
local bar=(42)
echo "${bar[*]}"
}
bar=43
foo
echo "$bar"
Some versions of shellcheck, including the latest, 0.7.2, complain
about $bar being reused as a plain string here. This is incorrect
since foo() holds its own copy of bar[@] hence the assignment which
takes place outside of it doesn't affect its content.
SC2178 can be mitigated be reversing the order of declaration:
bar=43
foo() { ... }
...
but the SC2128 still remains.
Currently, in our code majority of these warnings are coming from
false-positives due to initial source'ing which most of our test
scripts do (e.g. they fetch a function where local bar=() is used
and in the test itself $bar happens to be assigned a plain string.
This is still valid code).
To mitigate, disable these directives untill shellcheck is capable
of properly interpreting scoping when checking them.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ifbde973eae6e261d79e1c340eb28644bce5f4e45
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8503
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SC2269: This variable is assigned to itself, so the assignment does
nothing.
Since the --id check doesn't change the value of $id, remove it
completely. This simplifies the process_shm() so the --id type is
considered to a be default and $id changed only in case --pid was
explicitly requested.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: If8a4a43c6822fa1b32217a0b783cb96d0fee2644
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8502
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SC2030: Modification of var is local (to subshell caused by pipeline)
This directive is raised since the for loop (or rather its contents)
is piped through to another process. In this context it's not harmful
since we are interested only in sending the stdout but since we operate
on variables that happen to be local to the process that handles the
loop shellcheck sees that as a potential issue. To make it happy
remove the pipe and sort pci addresses prior running the loop.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I835c5ac1da9012129c5d01d62880307f70caab1b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8501
Community-CI: Mellanox Build Bot
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a first commit in the series addressing potential Bash issues
as discovered by the latest shellcheck release (0.7.2, shipped with
the very latest fedora33 and fedora34). The goal is to either fix,
locally or globally disable given directive(s).
SC2155: Declare and assign separately to avoid masking return values
Simplify the setting of the variable pointing at the root of the repo.
Also, keep it consistent with the rest of the scripts and declare it as
$rootdir.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I63e0b1a85ce16f7983e9ba6dd985046e8a39a650
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8500
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
On my system, the git grep for ^SPDK_RPC_REGISTER(
fails because the ( is unmatched. It seems we should
escape it, although clearly our CI systems don't seem
to require it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6412e27e79488616743f76b2d9eac8f62b996078
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8393
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When the property is 8 bytes but the host only requested
4, we need to mask and only return the bytes requested
by the host. Wait to do the DEBUGLOG until after
that has happened.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8f476a47e9fd07bf652fd64f3b1c17d650374167
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8506
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Interpret bare --with-dpdk opt as user's request to find installed
(provided by the distro) DPDK's libs|include files and use them during
the build.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I9da99671b95af0121194b3a6d53636b0ded71f1b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8348
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tom Nabarro <tom.nabarro@intel.com>
Reviewed-by: <tomasz.rochumski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This particular section must be defined in one place hence the
%{requirements_list} cannot be passed down later on. This requires
reordering of the .spec a bit. Most notably, all global macros are
now defined at the very beginning so then Requires section can be
build properly.
Also, use %() to expand the macro which holds the requirements as
bare "Requires: %{foo}" is not valid.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I69430f73d10204325fc825ecc392506f261ebaf1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8347
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Without it multiple threads can race and end up sharing a device
when the intention is sharing only after full round robin.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I29b854ff837d56078bc033802d3df244728a29aa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8187
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Was using "dst" in some cases and "crc_dst" in others for crc32c
related calls. Update them to always use crc_dst
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Icf200f1734c64c29881f23b02b8d12bad81b3ca0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8186
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Recent work identified race conditions having to do with the
dynamic flow control mechanism for the idxd engine. In order
to both address the issue and simplify the code a new scheme
is now in place. Essentially every DSA device will be allowed
to accomodate 8 channels and each channel will get a fixed 1/8
the number of work queue entries regardless of how many
channels there are. Assignment of channels to devices is round
robin and if/when no more channels can be accommodated the get
channel request will fail.
The performance tests also revealed another issue that was
masked before, it's a one-line so is in this patch for convenience.
In the idxd poller we limit the number of completions allowed
during one run to avoid the poller thread from starving other
threads since as operations complete on this thread they are
immediately replaced up to the limit for the channel.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I913e809a934b562feb495815a9b9c605d622285c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8171
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In spdk_idxd_configure_chan(), if memory allocation fails in
TAILQ_FOREACH() {} code range, we will goto err_user_comp and
err_user_desc tag, in which we donot free chan->completions
and confused batch->user_completions with chan->completions.
Memleak problem and double free problem may occurs.
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Change-Id: I0e588a35184d97cab0ea6b6c013ca8b3342f940a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8432
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
The latest Linux NVMe host (e.g. Linux kernel 5.12) have improved
the quality of multipath but still has an issue such that ANA state
is observed to be invalid even after connection is successfully
created.
By code inspection and system test, initializing ANA state may be
delayed even after connection is successfully created.
We can insert a short sleep but it will be better to retry checking
with timeout. The created function check_ana_state() is applied to
the remaining cases.
This fixes the part of the issue #1819.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifc4eaef7c702d961caeee5bcdc9e6eab4704fc5d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8475
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When a qpair is destroyed and the qpair is the last,
_nvmf_ctrlr_free_from_qpair() (in lib/nvmf/nvmf.c) sends two messages,
one is for _nvmf_ctrlr_destruct() and another is for
_nvmf_transport_qpair_fini().
We do not know which of two completes earlier.
_nvmf_ctrlr_destruct() frees the qpair->ctrlr in the end.
On the other hand, _nvmf_ctrlr_free_from_qpair() calls
spdk_nvmf_poll_group_remove() in the end, and spdk_nvmf_poll_group_remove()
accesses the qpair->ctrlr to free queued requests to the qpair.
Before one recent change, spdk_nvmf_poll_group_remove() had been called
before _nvmf_ctrlr_free_from_qpair() was called.
Hence extrace the operation to free queued requests from
spdk_nvmf_poll_group_remove() and inline it into _nvmf_qpair_destroy().
Fixes one showstopper error to investigate the issue reported in #1819.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I29c43ff7b289fc77a5de9c33e0266301c412e208
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8438
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
For benchmarking purposes, we may want to use a
relatively low queue depth but spread the operations
across a wider range of memory. A new -a option is
added where the user can specify an "allocate depth"
to do exactly that. In this case, more tasks (and
their associated buffers) can be allocated than we
have actual queue depth. Then when we pick a new
task for the next operation, it will use a different
memory range and avoid always using the same buffers
over and over again.
If not specified, we just allocate the same number
of tasks as the queue depth, which is the current
behavior.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I78042d905fd49d130c4a318e2c19eb11b84ff726
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8451
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
When a task completes, always put it back in the task
pool (using TAILQ_INSERT_TAIL) and then use _get_task
to get a task for the next submission. Currently this
will just allocate the task that was just put into
the TAILQ. But an upcoming patch will allocate
more tasks than we have queue depth, and this patch
will ensure all of those tasks get used evenly.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia6247a76ba60337fe6da3189e6c305f4dfb0a041
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8450
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Previously we would only assign the worker in _get_task().
But future patches will use _get_task() for each I/O,
not just during startup.
Also increment the current_queue_depth during startup
only, rather than every time _get_task() is called.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2713591d36b8353eaab8119ee230261f40857019
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8449
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Previously core load was only considered for main lcore.
Other cores were used based on cpumask only.
Once an active thread was placed on core it remained there
until idle. If _get_next_target_core() looped around,
the core might receive another active thread.
This patch makes the core load matter for placement of any thread.
As of this patch if no core can fit a thread it will remain there.
Later in the series least busy core will be used to balance
threads when every core is already busy.
Modified the functional test that depended on always selecting
consecutive core, even if 'current' one fit the bill.
Later in the series the round robin logic for core selection
is removed all together.
Fixed typo in test while here.
Note: _can_core_fit_thread() intentionally does not check
core->interrupt_mode and uses tsc. That flag is only updated
at the end of balancing right now. Meanwhile tsc is updated
one first thread moved to the core, so it is no longer
considered in interrupt mode.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I95f58c94e3f5ae8a468723d1dd6e53b0e417dcc3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8069
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Idle threads are always moved to main core, there are no
other considations. Doing it as separate first pass,
allows to have the core stats be up to date for second
pass for active threads.
Core load stats will be used later in the series to determine
optimal target core for an active thread.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6a9bc11b86e954e461f7badebf3a6e4d1718f63c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8067
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will be needed when doing multiple passes over
all threads. See next patch.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I4e9c749d69314fc268cbcb9334862392100b651e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8066
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When picking a path to go down with a thread,
conditions unnecessarily piled up.
Instead do it either of two ways:
- move idle threads to main core
- find best core for active threads and move them there
There is no need to worry about cpumask of the thread,
since _find_optimal_core() will always return a core
within the cpumask.
If the found core is the same one as the current,
_move_thread() won't perform any action.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0f4782766c15c86b5db0c970cfc9547058845b2a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8065
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Refactors logic for finding the optimal core for a thread
to single function.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifc2b09acb6f698640ce9602fec4f567eb32b79fa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6732
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Intention was for the threads to contain a single
core in the cpu mask.
This patch fixes it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I8276cc906be53a7f8195d61c63bfa54bd2647b75
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8068
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Refactor all thread moves and core stats updates to single function.
At this time in series only tsc of main core was modified and
only idle tsc of main core was used. Main core would be either
the destination core or the source core. In both cases, the idle
time for main core had to be updated.
This patch generalizes this logic to always move the execution
time from source core to destination core.
As a byproduct cores besides main core have the stats updated,
which will be useful later in the series. Once core load will
be the deciding factor for choosing a core.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I57564e8b2632f919869d74e8f10b01fb3dda3be9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6658
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
