Replace the spdk_nvme_ctrlr_reset_async() and spdk_nvme_reset_poll_async()
calls by the spdk_nvme_ctrlr_disconnect(), spdk_nvme_ctrlr_reconnect_async(),
and spdk_nvme_ctrlr_reconnect_poll_async() calls in a reset ctrlr
sequence.
spdk_nvme_ctrlr_disconnect() can fail if ctrlr is already resetting or
removed. But both cases are not possible. reset is controlled and the callback
to the hot remove is called when the ctrlr is hot removed. So we assume
spdk_nvme_ctrlr_disconnect() always succeed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1299e198597b2a2110f80b9a868e2dae015682ee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10092
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The NVMe bdev module will support two features, delayed reconnect and
delete after multiple failures of reconnect to improve error recovery.
The recently added two APIs, spdk_nvme_ctrlr_reset_async() and
spdk_nvme_ctrlr_reset_poll_async(), were not good enough.
spdk_nvme_ctrlr_reset_ctx was not necessary. It had only a pointer to ctrlr.
Using a pointer to ctrlr directly saves us from undesirable malloc error
processing.
Separate spdk_nvme_ctrlr_reset_async() into spdk_nvme_ctrlr_disconnect()
and spdk_nvme_ctrlr_reconnect_async(). spdk_nvme_ctrlr_disconnect()
disconnects ctrlr including disconnecting adminq.
spdk_nvme_ctrlr_reconnect_async() moves the ctrlr state to INIT.
Then rename spdk_nvme_ctrlr_reset_poll_async() by
spdk_nvme_ctrlr_reconnect_poll_async().
Finally deprecate spdk_nvme_ctrlr_reset_async() and
spdk_nvme_ctrlr_reset_poll_async().
The following patches will change the NVMe bdev module to use these new APIs.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id1d6858dcdc5fc2e9db0a6ebf3f79cab4f9bbcb7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10091
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Future patches will remove some of the more complex conditions
between different configure flags. As a result duplicate entries
might be present in DPDK_LIB_LIST.
Just for tidiness of the DPDK linker args, the DPDK_LIB_LIST_SORTED
is added. Using sort function removes duplicate entries in the list.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I318fd0cebbd30a80d281175b7d48bb3249abb841
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10537
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
This library was never used, remove it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5d0255f4b9ddbe98b349b4253f87e5332fe7057f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10526
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK supports only maintained LTS versions of DPDK.
For SPDK 22.01 this means DPDK 20.11 and 21.11.
This patch removes paths for earlier versions of DPDK.
There is no need to check if library is present for the following:
- rte_telemetry was added as rte_eal dependency in DPDK 20.05
- rte_kvargs was added as rte_eal dependency in DPDK 18.08
- rte_pmd_aesni_mb, rte_pmd_isal, rte_pmd_qat were removed in DPDK 20.11
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I30c4cdb0fe0634db50bc34d7d6c232806ff49960
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10525
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
At this time raid5 bdev does not depend on rte_hash in any way.
Meanwhile NVMe-oF Fibre Channel transport does.
This patch reflects that in the mk file for env_dpdk.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I2ba3e016337866f80fc7a6043cef87bf33cf2373
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10523
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since DPDK 21.05 -Denable_drivers option is present,
which only enables selected drivers in DPDK.
As name would suggest it is exact oposite of -Ddisable_drivers.
When building DPDK submodule all unused drivers were disabled
anyway.
Simplify this process by using the new option.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic8ac84b1d6dc88dd7c0b8c4aca391f31bfc93404
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10505
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
DPDK tests were usualy disabled in the DPDK submodule,
as part of skipping dpdk/app directory.
Since DPDK 18.02 -Dtests=false option was added to
skip building tests in dpdk/app/test.
This reduces the overall time taken to build DPDK from
submodule without introducing new changes to DPDK.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I425976fa38e09c140e517cccd8aeedd64c67b06c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10504
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
check_format.sh requires the following, none of which
are supported by default on MacOS and require alternative
homebrew installation for GNU variants:
* mapfile command not supported by bash
* -f option for readlink
* -P option for grep
Note that SPDK is not supported on MacOS, the changes
here are added only for developer convenience.
Fixes issue #2255.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic3d4ed49d9bfb4be50a8dd090a34090037f592c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10476
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Also consolidate Log Page Offset test cases together into a
new test function.
Change-Id: I0f9d25f1f5c3aa2238caf5766a9084bd561aefd1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10216
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I1a2fa8e818835889999fd615e8c192ffe2ef735d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10154
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
With more test cases added, we may not know exactly how many
tests cases are covered by the compliance test tool, so here
we use `Command Type` + `Command` + `Test Case` as the function
name of each test case.
Change-Id: I9d1f90c2463d15657133043fdf70d8124ef3fd87
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10152
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
The nvmf library will use INTEL VID/SSVID/IEEE values by default,
each transport can overwrite them if needed.
Change-Id: I9dad521c4d080b6f0cc1aaeb4b5d5f6863c6846d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10095
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also we don't treat exceptions when getting INTEL log pages
as a fatal error, the initialization will still contine.
Change-Id: Ic2fd2be510fde2679c1546482934d0a180266936
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10341
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Our tests, especially those which use nvme block devices for various
use-cases, won't be able to perform successful IO on such devices.
The idea is to skip them for now and introduce basic, dedicated,
tests for zoned nvmes in oncoming patches.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I67baad5c85c662921e3327f2101180283c89e96c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9181
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This also translates into switching fully to upstream QEMU for the
vagrant setup.
This is done in order to move away from OCSSD and SPDK's qemu fork
and align with what upstream QEMU supports. Main changes touch the
way how nvme namespaces are configured. With >= 5.2.0 it's possible
now to configure multiple namespace under single nvme device. Each
namespace requires a separate disk image to work with. This:
-b foo.img,nvme,1...
-b foo.img
-b foo.img,,..
Will still configure nvme controller with a single namespace attached
to foo.img.
This:
-b foo.img,,foo-ns1.img:foo-ns2.img
Will configure nvme controller with three namespaces.
Configuring nvme controller with no namespaces is possible via:
-b none ...
Note that this still allows to define other options specific to nvme
controller, like CMB and PMR. E.g:
-b none,nvme,,true
This will create nvme controller with no namespaces but with CMB
enabled.
It's possible now to also request for given controller to be zoned.
Currently if requsted, all namespaces under the target controller
will be zoned with no limit set as to max open|active zones.
All nvme devices have block size fixed to 4KB to imititate behavior
of the SPDK's qemu fork.
Compatibility with spdk-5.0.0 fork is preserved in context of setting
up namespaces so this:
-b foo.img,nvme,2
is valid as long as the emulator is set to that of spdk-5.0.0's.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ib5d53cb5c330c1f84b57e0bf877ea0e2d0312ddd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8421
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When NVMe passthru command (IO or admin) fails on submission (e.g. it
is not supported), set DNR bit in completion status field. There is no
sense in retrying the command in this case.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I55960c128bd9fc31f6defef0b9832259a71684b1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8578
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If NVMe admin passthru command is not supported by underlying bdev,
set status code in NVMe completion to INVALID_OPCODE.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I29c4e1f8263b76b27c199cfd2d9b2474432ec70b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10517
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The originally detected problem is that SPDK NVMf target fails command
with invalid opcode with status code INTERNAL_DEVICE_ERROR instead of
INVALID_OPCODE. All unknown commands on IO queue are passed to
underlying block device layer as NVME_IO type. It is not checked if
this type of commands is supported and, when command fails,
INTERNAL_DEVICE_ERROR is set as status code. If command fails on
submission, status code is set to INVALID_OPCODE which is more
relevant.
This patch adds check if command type is supported to
bdev_nvme_*_passthru functions. If not supported, it is failed with
ENOTSUP.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I4d7f7639da17dd3b1dc3eee7eb1b4a4f876117a2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8567
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ic65537768811f98370509b47a0e7b80dee60e032
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10486
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This fixes commit 74dcf4aa "example/nvme/arbitration: add vfio-user transport support".
For vfio-user transport, we should use static DPDK memory model for
sharing memory between client and target. Also enable log option here.
Change-Id: Iea1b28cbf234f5fc935c54899023bdbf1733a671
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10510
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch enables WARN_NO_PARAMDOC in Doxygen and
resolves remaining issues.
Void return type does not require documentation.
Some of the removed docs were not even Doxygen type
comment, see lack of '\'.
Fixed errors were similar to below:
spdk/include/spdk/nvmf.h:1081: warning: documented empty return type of spdk_nvmf_tgt_add_transport
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6bb282ead8dc918885f7a89ab8829e4f5c477247
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10387
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Resolves issue below
spdk/doc/accel_fw.md:111: error: explicit link request to 'accel_idxd_kernel' could not be resolved
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5bf205706a43887e0cac0bcc5b8c5de1dc67e7f3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10385
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Documentation for spdk_scsi_dev_get_next_lun now matches
the function.
include/spdk/scsi.h:239: error: argument 'lun' of command @param is not found in the argument list of spdk_scsi_dev_get_next_lun(struct spdk_scsi_lun *prev_lun)
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I40512656cc215933fcd945429fac23318a083e09
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10384
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Upstream QEMU initializes the Number Of Namespaces (NN) on each of
the emulated nvme subsystems to NVME_MAX_NAMESPACES (256) - this is
the case even for a device which doesn't have any active namespaces.
In case nvme_fio_test() finds such a device (no active namespaces)
it still attempts to run fio against it due to a false positive which
comes from looking up the Number Of Namespaces.
Adjust the check to look for strings related to active namespaces
and pick devices which report any.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I5b222f1152f2a799b0d600ca19ad13eda009878a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10503
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Move row drawing for threads, pollers and cores to separate functions.
This is going to be used in the next patch to avoid enclosing very large
code blocks inside if/else statements.
Changed variable representing columns in core tab from "offset" to "col"
to be consistent with threads' and polllers' functions.
Change-Id: Ie818458e926df71786196fcb857113416297ece9
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10346
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
It's been some time since SPDK switched from ini to json,
there's no much benefit from keeping these tests around.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I0cf7fcd6587abe872553211e41bee12e14bf234f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10065
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
TypeError: ethtool_after_fio_ramp() argument after * must be an iterable, not int
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I12403967b5b8ce7282c65296a54e00bd047cf903
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10367
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
SPDK shouldn't use `free` to free the memory allocated by rte_zmalloc_socket.
Otherwises, the vhost-blk/scsi will continuously crash.
In this patch, SPDK don't free the dpdk allocated memory,
DPDK will free it finally. Add a flag to indice the resubmit handle.
Change-Id: I85fd84b7d27a091830006a0f84d541c48290cbb3
Signed-off-by: Li Feng <fengli@smartx.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10383
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
behaviour for spdk_for_each_channel_continue was not clear when user
pass non 0 status, now it is clarified
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I1aa5b5226e1aaf150ef069743f363f46d6c19e6d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10497
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This driver is now built by vm_setup.sh and installed under
/lib/modules.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Icea6b96e60390932c14ff49405614c186e61a99b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6099
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Fetching these patches from external forks of DPDK repo is a bit
cumbersome and hard to maintain so instead have them in one place
for easy apply.
All of the patches were fetched "as-is" from the used forks, with
a commit section trimmed to provide just the relevant info.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I6bf538ea15ef87fe04d5a77944de36c797cdf284
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10360
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Move the CONFIGURE_AER state before SET_KEEP_ALIVE to
make sure that we run the CONFIGURE_AER state for
discovery controllers.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia4e24f6507c43e3fece06b9161ff8e0b8fa0e97d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10332
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We will actually run the CONFIGURE_AER state for
discovery controllers in a future patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib114beb886ab4b9214e4525479eb5ec7e038e5d9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10331
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Part of #2256
* configured
Change-Id: Id63410c990522e74263f6612e43996237a9ce0ee
Signed-off-by: Josh Soref <jsoref@gmail.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10407
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_for_each_channel() always passes status=0 to its completion callback
if each channel completes the requested function successfully.
bdev_nvme_reset_destroy_qpair() always succeeds.
Hence bdev_nvme_reset_ctrlr() does not have to check if the passed
status is not zero.
The following patches will aggregate multiple flags into a single
state for nvme_ctrlr. This change will simplify these.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1c30c9b20c96886516029e69e90dc23d777a69b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10077
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In the following patches, we want to retry reconnect if reconnect failed
in a reset ctrlr sequence but we want to delay the retry. While
we wait the delayed retry, we want to quiesce ctrlr completely.
As part of quiesce ctrlr operations, we want to pause adminq poller but
we need to do it on the nvme_ctrlr->thread.
If a reset ctrlr sequence runs on the nvme_ctrlr->thread, we can avoid
redirecting the pending destruct request at completion too.
So we redirect the reset ctrlr sequence into the nvme_ctrlr->thread.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I538b962e2a7b5cf00ebbac2a1e888482ddeeee61
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10075
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
in case of failure groups shall be destroyed
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I8933f4128a7a3361bbb55d6a9c08a540521e5bda
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10435
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
